The PB200 WeatherStation® Instrument informs you of instantaneous changes in the weather. Wind Speed and Direction are measured using four ultrasonic transducers; no moving parts make it durable and reliable. The internal, WAAS GPS engine and three-axis solid-state compass provide both Apparent and True Wind Speed and Direction without the need to tack on additional sensors. Also, the WAAS GPS generates navigation data as well as magnetic variation and is suitable as your primary GPS source. The internal temperature and barometric pressure sensors help predict changing weather patterns. Combined with the internal heading sensor, all of your navigation needs are there! No other instrument on the market incorporates all of these sensors in one compact housing.

What sets our data apart from the competition is the 2° heading accuracy under dynamic conditions such as rough seas. Airmar’s unique dynamic-motion-correction software is the key. The PB200’s heading is highly accurate and stable under most sea conditions, even if the vessel is pitching and rolling up to 30°. Also unique to the PB200 is that the 3D accelerometer and rate gyro are temperature compensated, resulting in precise tilt and rate-of-turn data. This allows the PB200 to accurately measure True Wind Speed and Direction even when tilted up to 30°.

Features

• Professional Sensor
• No Moving Parts
• True Wind
• Apparent Wind
• Air Temperature
• Barometric Pressure
• Wind Chill
• WAAS / EGNOS GPS
• 3-Axis Compass
• 3-Axis Accelerometer
• Rate Gyro
• NMEA 0183 & 2000®

DATA OUTPUT PROTOCOL

NMEA 0183 Sentence Structure

$GPDTM......Datum Reference
$GPGGA......GPS Fix Data
$GPGLL........ Geographic Position?Latitude and Longitude
$GPGSA.......GNSS DOP and Active Satellite
$GPGSV.......Satellites in View
$GPRMC......Recommended Minimum GNSS
$GPVTG.......COG and SOG
$GPZDA.......Time and Date
$HCHDG......Heading, Deviation, and Variation
$HCHDT......True Heading
$TIROT.........Rate of Turn
$WIMDA......Meteorological Composite
$WIMWD....Wind Direction and Speed
$WIMWV.....Wind Speed and Angle
$WIMWR.....Relative Wind Direction and Speed
$WIMWT.....True Wind Direction and Speed
$YXXDR.......Transducer Measurements

NMEA 2000® Supported PGNs

59392....... ISO Acknowledgement
060928..... ISO Address Claim
126208..... Acknowledge Group Function
126464..... PGN List
126992..... System Time
126996..... Product Information
126998..... Configuration Information
127250.....Vessel Heading
127251..... Rate of Turn
127257..... Attitude
127258..... Magnetic Variation
129025..... Position and Rapid Update
129026..... COG and SOG, Rapid Update
129029..... GNSS Position Data
129033..... Time and Date
129044..... Datum
129538..... GNSS Control Status
129539..... GNSS DOPs
129540..... GNSS Sats in View
130306..... Wind Data
130310..... Environmental Parameters
130311..... Environmental Parameters
130323..... Meteorological Station Data

Use this cable to connect a PB150, PB200, WX100 G2183, H2183 and GH2183 ro a NMEA2000® network.

Use this cable to connect a PB150, PB200, WX100 G2183, H2183 and GH2183 ro a NMEA2000® network.

Use this cable to connect a PB150, PB200, WX100 G2183, H2183 and GH2183 ro a NMEA2000® network.

Use this cable to connect a PB150, PB200, WX100 G2183, H2183 and GH2183 ro a NMEA2000® network.

Combine the fish-finding power of an Airmar transducer with the viewing capability of the Airmar CA500 Camera and get the ultimate underwater observation system. This thru-hull camera will display what is directly below the boat, making it an ideal underwater fishing camera or video surveillance / safety system. Simply connect the single cable to any display with a NTSC input and spy on the underwater world. Airmar has combined the industry renowned Airmar housings with one of the lowest Lux (0.01) cameras available today - all protected by a sapphire viewing window that resists scratching or cracking. The retractable housing with valve is made of plastic and allows for easy servicing and cleaning of the camera while the boat is in the water. See what you have been missing with the Airmar CA500 Underwater Camera.

• Underwater Camera
• Low Lux (0.01)
• Day or Night Viewing
• NTSC
• Sapphire Window
• Retractable Insert

Combine the fish-finding power of an Airmar transducer with the viewing capability of the Airmar CA500 Camera and get the ultimate underwater observation system. This thru-hull camera will display what is directly below the boat, making it an ideal underwater fishing camera or video surveillance / safety system. Simply connect the single cable to any display with a NTSC input and spy on the underwater world. Airmar has combined the industry renowned Airmar housings with one of the lowest Lux (0.01) cameras available today - all protected by a sapphire viewing window that resists scratching or cracking. The retractable housing with valve is made of  bronze and allows for easy servicing and cleaning of the camera while the boat is in the water. See what you have been missing with the Airmar CA500 Underwater Camera.

• Underwater Camera
• Low Lux (0.01)
• Day or Night Viewing
• NTSC
• Sapphire Window
• Retractable Insert

Transom paddlewheel and carrier Fits: P37, P52, P55, S61 and ST63 multi-function transducers and speed sensors with detachable paddlewheel assembly

Thru-hull spares kit. Contains all wearing parts in the paddlewheel and plug assembly

Transom speed repair kit for S61 (can also use complete 33-105) and S63 transom paddlewheel speed sensors with cable

Thru-Hull TRIDUCER® Multisensor spares kit. Contains all wearing parts in the paddlewheel and plug assembly

Contains all wearing parts in the paddlewheel and plug assembly

Thru-Hull TRIDUCER® Multisensor spares kit. Contains all wearing parts in the paddlewheel and plug assembly

Thru-hull spares kit. Contains all wearing parts in the paddlewheel assembly

Thru-hull spares kit for S650, ST650.

Contains all wearing parts in the paddlewheel and blanking plug assemblies

Fits: newer style P66 transducers,  Identifier: Horseshoe shaped slot in cover where cable exits. Older style P66 bracket (P/N 20-275-01) is no longer available

Airmar’s P79 in-hull transducer easily adjusts to hull dead rise angles up to 22 °. This ensures that the beam is vertically oriented to receive echos, resulting in accurate depth readings. Unlike traditional "puck" type transducers, our P79 consists of a base that is bonded to the hull and filled with liquid. The separate transducer then attaches to the base with a twist lock. The sound waves travel more efficiently though the liquid, giving the best possible performance.

• Depth
• 50/200 kHz
• 600 W RMS
• Mid-performance
• Plastic

Description

Step up to a 1kW_Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer.

Features

• Depth & Temperature
• 50/200 kHz
• 1 kW RMS
• High-Performance
• 0° tilt to element
• Bronze

Features:

• Depth/Temp
• 50/200 kHz
• 1 kW RMS
• High-performance
• Bronze

Step up to a 1kW-Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmar’s 1kW tilted element transducers. With Raymarine connector.

Step up to a 1kW-Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmar’s 1kW tilted element transducers. With Furuno 10 pin connector

Step up to a 1kW-Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmar’s 1kW tilted element transducers. With Northstar 10 pin connector

Step up to a 1kW-Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmar’s 1kW tilted element transducers. With Garmin 6 pin connector

Step up to a 1kW-Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmar’s 1kW tilted element transducers. With Navman/Northstar 6 pin connector

Features:

• Depth/Temp
• 50/200 kHz
• 1 kW RMS
• High-performance
• Bronze

Step up to a 1kW-Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmar’s 1kW tilted element transducers. With Simrad 7 pin connector.

Step up to a 1kW-Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmar’s 1kW tilted element transducers. With Lowrance Blue connector

Features:

• Depth/Temp
• 50/200 kHz
• 1 kW RMS
• High-performance
• Bronze

Step up to a 1kW-Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmar’s 1kW tilted element transducers. With Raymarine connector.

Step up to a 1kW-Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmar’s 1kW tilted element transducers. With Furuno 10 pin connector

Step up to a 1kW-Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmar’s 1kW tilted element transducers. With Garmin 6 pin connector

Step up to a 1kW-Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmar’s 1kW tilted element transducers. With Navman/Northstar 6 pin connector

Features:

• Depth/Temp
• 50/200 kHz
• 1 kW RMS
• High-performance
• Bronze

Step up to a 1kW-Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmar’s 1kW tilted element transducers. With Simrad 7 pin connector.

Step up to a 1kW-Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmar’s 1kW tilted element transducers. With Lowrance Blue connector

Features:

• Depth/Temp
• 50/200 kHz
• 1 kW RMS
• High-performance
• Bronze

Step up to a 1kW-Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmar’s 1kW tilted element transducers. With Raymarine connector.

Features:

• Depth/Temp
• 50/200 kHz
• 600 W RMS
• Mid-performance
• Bronze

The bronze B60-12° and B60-20° provide a vertical beam without a fairing. Inside the housing, the ceramic element is tilted to provide built-in deadrise compensation. The resulting vertical beam provides excellent echo returns for more accurate depth readings. The nearly flush housing minimizes drag with only 5 mm (3/16") extending outside of the hull. With Lowrance Blue connector.

Features:

• Depth/Temp
• 50/200 kHz
• 600 W RMS
• Mid-performance
• Bronze

The bronze B60-12° and B60-20° provide a vertical beam without a fairing. Inside the housing, the ceramic element is tilted to provide built-in deadrise compensation. The resulting vertical beam provides excellent echo returns for more accurate depth readings. The nearly flush housing minimizes drag with only 5 mm (3/16") extending outside of the hull. With Northstar 6 pin connector.

Features:

• Depth/Temp
• 50/200 kHz
• 600 W RMS
• Mid-performance
• Bronze

The bronze B60-12° and B60-20° provide a vertical beam without a fairing. Inside the housing, the ceramic element is tilted to provide built-in deadrise compensation. The resulting vertical beam provides excellent echo returns for more accurate depth readings. The nearly flush housing minimizes drag with only 5 mm (3/16") extending outside of the hull. With Garmin 6 pin connector.

Features:

• Depth/Temp
• 50/200 kHz
• 600 W RMS
• Mid-performance
• Bronze

The bronze B60-12° and B60-20° provide a vertical beam without a fairing. Inside the housing, the ceramic element is tilted to provide built-in deadrise compensation. The resulting vertical beam provides excellent echo returns for more accurate depth readings. The nearly flush housing minimizes drag with only 5 mm (3/16") extending outside of the hull. With Northstar 10 pin connector.

Features:

• Depth/Temp
• 50/200 kHz
• 600 W RMS
• Mid-performance
• Bronze

The bronze B60-12° and B60-20° provide a vertical beam without a fairing. Inside the housing, the ceramic element is tilted to provide built-in deadrise compensation. The resulting vertical beam provides excellent echo returns for more accurate depth readings. The nearly flush housing minimizes drag with only 5 mm (3/16") extending outside of the hull. With Lowrance Blue connector.

Features:

• Depth/Temp
• 50/200 kHz
• 600 W RMS
• Mid-performance
• Bronze

The bronze B60-12° and B60-20° provide a vertical beam without a fairing. Inside the housing, the ceramic element is tilted to provide built-in deadrise compensation. The resulting vertical beam provides excellent echo returns for more accurate depth readings. The nearly flush housing minimizes drag with only 5 mm (3/16") extending outside of the hull. With Garmin 6 pin connector.

Fishing Applications

• Inshore or coastal fishing in shallow to medium depths
• Slow trolling, structure fishing and drifting
• Deep-water lake fishing

Features

• Depth, speed, and temperature in one housing
• Greatly improved high-speed performance at
• Both 50 kHz and 200 kHz when installed with a high-performance fairing
• Patented self-closing sea valve reduces water flow into the hull when paddlewheel insert is removed
• Speed Operating Range:
  • 1 knot to 45 knots (1 MPH to 52 MPH)
• Fins on sides of paddlewheel cavity provide improved accuracy in cross flow conditions
• With Lowrance Blue connector

Features:

• Depth/Temp
• 50/200 kHz
• 600 W RMS
• Mid-performance
• Bronze

The bronze B60-12° and B60-20° provide a vertical beam without a fairing. Inside the housing, the ceramic element is tilted to provide built-in deadrise compensation. The resulting vertical beam provides excellent echo returns for more accurate depth readings. The nearly flush housing minimizes drag with only 5 mm (3/16") extending outside of the hull. With Garmin 6 pin connector.

Airmar?s P66 is the best performing and most popular transom-mount, TRIDUCER® Multisensor in the market. Because of its hydrodynamic shape, water coming off the transom flows smoothly under the transducer face. This results in accurate, high-speed, depth and speed readings and clear display images. The plastic release bracket lets the P66 rotate up to protect the housing if struck by an object while underway.

Frequency: 50/200 kHz
Cone: 45° / 11°
RMS Power: 600 W

• Transom-Mount, Plastic Housing
• Depth, speed, and temperature
• Maximum Depth Range:
  • 50 kHz? 235 m to 353 m (800? to 1,200?)
  • 200 kHz?118 m to 206 m (400? to 700?)
• Boat Size: 5 m to 8 m (18? to 25?)
• Best performing transom-mount

Features:

• Depth/Temp
• 50/200 kHz
• 600 W RMS
• Mid-performance
• Bronze

The bronze B60-12° and B60-20° provide a vertical beam without a fairing. Inside the housing, the ceramic element is tilted to provide built-in deadrise compensation. The resulting vertical beam provides excellent echo returns for more accurate depth readings. The nearly flush housing minimizes drag with only 5 mm (3/16") extending outside of the hull. With Northstar 6 pin connector.

Description

Step up to a 1kW_Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer.

Features

• Depth & Temperature
• 50/200 kHz
• 1 kW RMS
• High-Performance
• 0° tilt to element
• Bronze