A Great Day of Boating is a Complete Success When Your Engine Starts to Take You Home!

There is no worse end to a boating trip than discovering a discharged battery when you are ready to call it a day. With the new StartNow from Charles Marine, you never have to worry about facing this unpleasant experience.

The StartNow microprocessor allows the main battery to drain without draining the reserve battery. StartNow automatically detects if the main battery voltage is too low and activates the reserve battery to start your engine.

Recharging is automatic from an alternator or battery charger and the microprocessor guarantees the battery will never overcharge and always be ready.

ISO-BOOST AUTOMATIC ISOLATION AND BOOSTING TRAN SFORMER FOR 50 & 100 AMP SERVICE

Easy to install and use, operational status is indicated by four lights on the unit, and low-voltage bypass switch provides simple, positive user control. ISO-Boost 50 occupies less space and is easier to install than separate units. Terminal blocks allow for easy customer connections. An optional remote indicator panel permits monitoring of operational status from any convenient location.

ISO-Boost 50 Automatic Isolation and Boosting Transformer is designed to operate on 50 Amp systems. ISO-Boost 100 Automatic Isolation and Boosting Transformer includes features similar to ISO-Boost 50, but is designed for 100 Amp systems.

An ISO-Boost™ Automatic Marine Isolation and Boosting Transformer is essential where long dock runs cause voltage drops or Fluctuations in power. The compact unit provides all the magnetic power transfer benefits of an isolation transformer, plus automatically "boosting " low or fluctuating voltages from the dock.

ISO-Boost distances itself from existing designs by meeting all requirements of ABYC E-8.20.1. Transformer windings are encapsulated and the shield providing safety between primary and secondary windings is of sufficient ampacity to provide a full fault-current path. In addition, iso-Boost 50 has been subjected to thermal, vibration and shock tests indicative of the marine environment by Underwriters Laboratories, and carries their prestigious Marine UL listing.

Internal circuitry monitors shore and boat voltages, and then adjusts output. The "boost" mode increases the isolated output voltage by 15% to supply appropriate power in the event of low voltage or wire losses during peak power times. If the dock voltage fluctuates above 225 VAC, the unit switches back to the normal isolated output. Mechanically interlocked contactors switch the output between "regular" and "boost " modes, a redundant safety feature that prevents internal shorts and enables a highly efficient voltage transition since there are virtually no losses across the contactors.

Compliance with independent testing lab requirements maximize safety
Marine UL listing ensures durability and safety
Greatly reduced potential for in-water shock hazard
Constant, safe, power in spite of long dock runs and voltage fluctuations protects on-board equipment
Permits operation of 240VAC systems from 208VAC dock supply
Superior technology guarantees top performance
12 or 24KVA fully encapsulated isolation transformer and full current carrying shield per ABYC E-8.20.1.
Easy to install and use
Illuminated POWER, BOOST, and LOW VOLTAGE indicators and a low voltage BYPASS switch provide simple, positive user control.
Status indicators and Bypass switch also available on an optional remote panel.
Occupies less space and easier to install than separate units.
Terminal blocks for easy customer connections.
Corrosion resistant housing and components
Housed in a convection-cooled enclosure meeting the intent of NMEA 3R requirements.
Corrosion-resistant housing and components
Convection-cooled enclosure meets the intent of NMEA 3R requirements.

ISO-BOOST AUTOMATIC ISOLATION AND BOOSTING TRANSFORMER FOR 50 & 100 AMP SERVICE

Easy to install and use, operational status is indicated by four lights on the unit, and low-voltage bypass switch provides simple, positive user control. ISO-Boost 50 occupies less space and is easier to install than separate units. Terminal blocks allow for easy customer connections. An optional remote indicator panel permits monitoring of operational status from any convenient location.

ISO-Boost 50 Automatic Isolation and Boosting Transformer is designed to operate on 50 Amp systems. ISO-Boost 100 Automatic isolation and Boosting Transformer includes features similar to ISO-Boost 50, but is designed for 100 Amp systems.

An ISO-Boost™ Automatic Marine Isolation and Boosting Transformer is essential where long dock runs cause voltage drops or fluctuations in power. The compact unit provides all the magnetic power transfer benefits of an isolation transformer, plus automatically "boosting " low or fluctuating voltages from the dock.

ISO-Boost distances itself from existing designs by meeting all requirements of ABYC E-8.20.1. Transformer windings are encapsulated and the shield providing safety between primary and secondary windings is of sufficient ampacity to provide a full fault-current path. In addition, iso-Boost 50 has been subjected to thermal, vibration and shock tests indicative of the marine environment by Underwriters Laboratories, and carries their prestigious Marine UL listing.

Internal circuitry monitors shore and boat voltages, and then adjusts output. The "boost" mode increases the isolated output voltage by 15% to supply appropriate power in the event of low voltage or wire losses during peak power times. If the dock voltage fluctuates above 225 VAC, the unit switches back to the normal isolated output. Mechanically interlocked contactors switch the output between "regular" and "boost " modes, a redundant safety feature that prevents internal shorts and enables a highly efficient voltage transition since there are virtually no losses across the contactors.

Compliance with independent testing lab requirements maximize safety
Marine UL listing ensures durability and safety
Greatly reduced potential for in-water shock hazard
Constant, safe, power in spite of long dock runs and voltage fluctuations protects on-board equipment
Permits operation of 240VAC systems from 208VAC dock supply
Superior technology guarantees top performance
12 or 24KVA fully encapsulated isolation transformer and full current carrying shield per ABYC E-8.20.1.
Easy to install and use
Illuminated POWER, BOOST, and LOW VOLTAGE indicators and a low voltage BYPASS switch provide simple, positive user control.
Status indicators and Bypass switch also available on an optional remote panel.
Occupies less space and easier to install than separate units.
Terminal blocks for easy customer connections.
Corrosion resistant housing and components
Housed in a convection-cooled enclosure meeting the intent of NMEA 3R requirements.
Corrosion-resistant housing and components
Convection-cooled enclosure meets the intent of NMEA 3R requirements.

Intelligent Battery Combiner
The BattCom™ is a high-tech battery combiner that automatically allows the charging of two batteries from a single alternator.

Using advanced technology and complex logic, the BattCom monitors the alternator of the boat. Once an operational alternator is detected, both batteries are automatically combined. When the alternator is turned
off, the batteries are once again isolated to prevent power draining from the other battery.

The BattCom is ideal for multiple battery systems and as an automatic battery switch replacement.

Designed for rugged environments, the compact BattCom incorporates 280 amp heavy duty relay contacts and is 100% sealed and waterproof. Corrosion resistant stainless steel studs and an impact resistant ABS case make this battery combiner a must for any serious boater.

Dimensions: 3" h x 4" w x 2.5" d
Weight: 1 lb.
Made in the U.S.A.
 

5000 SP Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, the units are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.
  Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
• Tested for durability against static, impact, vibration and shock
• DC ammeter indicates the charge rate
• Ignition protected (USCG-33 CFR 183.410)
• AC and DC fuse protection

Multi-step charging with temperature compensation

• Restores up to 3 individual battery banks simultaneously
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

Corrosion resistant housing and components

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C
   

• Cooling fan only operates during peak current demands
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements
   

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
• Exterior slots for easy mounting
• Easy access to terminal connections and fuses
• 5 Year warranty, made in the USA
  
  
   

5000 SP Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, the units are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.
  Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
• Tested for durability against static, impact, vibration and shock
• DC ammeter indicates the charge rate
• Ignition protected (USCG-33 CFR 183.410)
• AC and DC fuse protection

Multi-step charging with temperature compensation

• Restores up to 3 individual battery banks simultaneously
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

Corrosion resistant housing and components

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C
   

• Cooling fan only operates during peak current demands
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements
   

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
• Exterior slots for easy mounting
• Easy access to terminal connections and fuses
• 5 Year warranty, made in the USA
  
  
   

5000 SP Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, the units are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.
  Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
• Tested for durability against static, impact, vibration and shock
• DC ammeter indicates the charge rate
• Ignition protected (USCG-33 CFR 183.410)
• AC and DC fuse protection

Multi-step charging with temperature compensation

• Restores up to 3 individual battery banks simultaneously
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

Corrosion resistant housing and components

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C
   

• Cooling fan only operates during peak current demands
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements
   

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
• Exterior slots for easy mounting
• Easy access to terminal connections and fuses
• 5 Year warranty, made in the USA
  
  
   

5000 SP Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, the units are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.
  Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
• Tested for durability against static, impact, vibration and shock
• DC ammeter indicates the charge rate
• Ignition protected (USCG-33 CFR 183.410)
• AC and DC fuse protection

Multi-step charging with temperature compensation

• Restores up to 3 individual battery banks simultaneously
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

Corrosion resistant housing and components

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C
   

• Cooling fan only operates during peak current demands
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements
   

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
• Exterior slots for easy mounting
• Easy access to terminal connections and fuses
• 5 Year warranty, made in the USA
  
  
   

5000 SP Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, the units are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.
  Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
• Tested for durability against static, impact, vibration and shock
• DC ammeter indicates the charge rate
• Ignition protected (USCG-33 CFR 183.410)
• AC and DC fuse protection

Multi-step charging with temperature compensation

• Restores up to 3 individual battery banks simultaneously
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

Corrosion resistant housing and components

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C
   

• Cooling fan only operates during peak current demands
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements
   

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
• Exterior slots for easy mounting
• Easy access to terminal connections and fuses
• 5 Year warranty, made in the USA
  
  
   

5000 SP Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, the units are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.
  Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
• Tested for durability against static, impact, vibration and shock
• DC ammeter indicates the charge rate
• Ignition protected (USCG-33 CFR 183.410)
• AC and DC fuse protection

Multi-step charging with temperature compensation

• Restores up to 3 individual battery banks simultaneously
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

Corrosion resistant housing and components

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C
   

• Cooling fan only operates during peak current demands
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements
   

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
• Exterior slots for easy mounting
• Easy access to terminal connections and fuses
• 5 Year warranty, made in the USA
  
  
   

5000 SP Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, the units are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.
  Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
• Tested for durability against static, impact, vibration and shock
• DC ammeter indicates the charge rate
• Ignition protected (USCG-33 CFR 183.410)
• AC and DC fuse protection

Multi-step charging with temperature compensation

• Restores up to 3 individual battery banks simultaneously
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

Corrosion resistant housing and components

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C
   

• Cooling fan only operates during peak current demands
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements
   

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
• Exterior slots for easy mounting
• Easy access to terminal connections and fuses
• 5 Year warranty, made in the USA
  
  
   

5000 SP Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, the units are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.
  Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
• Tested for durability against static, impact, vibration and shock
• DC ammeter indicates the charge rate
• Ignition protected (USCG-33 CFR 183.410)
• AC and DC fuse protection

Multi-step charging with temperature compensation

• Restores up to 3 individual battery banks simultaneously
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

Corrosion resistant housing and components

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C
   

• Cooling fan only operates during peak current demands
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements
   

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
• Exterior slots for easy mounting
• Easy access to terminal connections and fuses
• 5 Year warranty, made in the USA
  
  
   

5000 SP Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, the units are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.
  Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
• Tested for durability against static, impact, vibration and shock
• DC ammeter indicates the charge rate
• Ignition protected (USCG-33 CFR 183.410)
• AC and DC fuse protection

Multi-step charging with temperature compensation

• Restores up to 3 individual battery banks simultaneously
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

Corrosion resistant housing and components

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C
   

• Cooling fan only operates during peak current demands
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements
   

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
• Exterior slots for easy mounting
• Easy access to terminal connections and fuses
• 5 Year warranty, made in the USA
  
  
   

5000 SP Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, the units are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.
  Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
• Tested for durability against static, impact, vibration and shock
• DC ammeter indicates the charge rate
• Ignition protected (USCG-33 CFR 183.410)
• AC and DC fuse protection

Multi-step charging with temperature compensation

• Restores up to 3 individual battery banks simultaneously
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

Corrosion resistant housing and components

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C
   

• Cooling fan only operates during peak current demands
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements
   

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
• Exterior slots for easy mounting
• Easy access to terminal connections and fuses
• 5 Year warranty, made in the USA
  
  
   

5000 SP Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, the units are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.
  Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
• Tested for durability against static, impact, vibration and shock
• DC ammeter indicates the charge rate
• Ignition protected (USCG-33 CFR 183.410)
• AC and DC fuse protection

Multi-step charging with temperature compensation

• Restores up to 3 individual battery banks simultaneously
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

Corrosion resistant housing and components

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C
   

• Cooling fan only operates during peak current demands
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements
   

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
• Exterior slots for easy mounting
• Easy access to terminal connections and fuses
• 5 Year warranty, made in the USA
  
  
   

5000 SP Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, the units are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.
  Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
• Tested for durability against static, impact, vibration and shock
• DC ammeter indicates the charge rate
• Ignition protected (USCG-33 CFR 183.410)
• AC and DC fuse protection

Multi-step charging with temperature compensation

• Restores up to 3 individual battery banks simultaneously
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

Corrosion resistant housing and components

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C
   

• Cooling fan only operates during peak current demands
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements
   

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
• Exterior slots for easy mounting
• Easy access to terminal connections and fuses
• 5 Year warranty, made in the USA
  
  
   

5000 SP Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, the units are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.
  Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
• Tested for durability against static, impact, vibration and shock
• DC ammeter indicates the charge rate
• Ignition protected (USCG-33 CFR 183.410)
• AC and DC fuse protection

Multi-step charging with temperature compensation

• Restores up to 3 individual battery banks simultaneously
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

Corrosion resistant housing and components

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C
   

• Cooling fan only operates during peak current demands
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements
   

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
• Exterior slots for easy mounting
• Easy access to terminal connections and fuses
• 5 Year warranty, made in the USA
  
  
   

5000 SP Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, the units are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.
  Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
• Tested for durability against static, impact, vibration and shock
• DC ammeter indicates the charge rate
• Ignition protected (USCG-33 CFR 183.410)
• AC and DC fuse protection

Multi-step charging with temperature compensation

• Restores up to 3 individual battery banks simultaneously
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

Corrosion resistant housing and components

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C
   

• Cooling fan only operates during peak current demands
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements
   

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
• Exterior slots for easy mounting
• Easy access to terminal connections and fuses
• 5 Year warranty, made in the USA
  
  
   

5000 SP Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, the units are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.
  Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
• Tested for durability against static, impact, vibration and shock
• DC ammeter indicates the charge rate
• Ignition protected (USCG-33 CFR 183.410)
• AC and DC fuse protection

Multi-step charging with temperature compensation

• Restores up to 3 individual battery banks simultaneously
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

Corrosion resistant housing and components

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C
   

• Cooling fan only operates during peak current demands
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements
   

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
• Exterior slots for easy mounting
• Easy access to terminal connections and fuses
• 5 Year warranty, made in the USA
  
  
   

****This is the expansion Module only****

Imagine the convenience of a complete communications system aboard your yacht. Features include traditional phone service at dockside, an intercom function and a paging, security alert and fog horn system. Add the cellular option, and you can also send and receive calls after you set sail. It’s all possible with C-PHONE™

Designed with solid-state components, C-PHONE™ offers more high-performance features than any other communications system.

Modern communications on the water

• Sends and receives phone calls from all stations
• Functions as an intercom between stations
• Two-line system expandable to 12 stations

More features than most other communication systems

• Handset-controlled hailer volume allows volume to be adjusted to three levels-low, medium and high
• Serves as a paging, security alert and fog horn system when used with 8 ohm weatherproof hailer horn
• Distinctive ring identification-outside calls identified by a single (land line) or double (cellular) ring, and intercom calls distinguished by triple ring
• Selective privacy ringing that directs all incoming calls to one station

Stay connected while underway with cellular option

• Accesses cellular lines with optional transceiver/interface unit
• Makes and receives outside calls while on the water
• Rugged, extruded aluminum I-beam style transceiver chassis
• Option includes single station cellular telephone system, transceiver/interface unit and all necessary wiring and instructions

Superior technology guarantees top performance

• Microprocessor controlled with solid-state components
• Design proven against extreme humidity, mechanical shock, vibration, temperature, thermal shock and dust

Easy to install and use

• No special wiring or separate phone and intercom sets required
• Use any phone-either tone or pulse system
• Designed to operate on 12, 24 or 36 VDC input voltages
• Only two conductors-tip and ring-go from master unit to each station

****Phone Sold Separately****

Imagine the convenience of a complete communications system aboard your yacht. Features include traditional phone service at dockside, an intercom function and a paging, security alert and fog horn system. Add the cellular option, and you can also send and receive calls after you set sail. It’s all possible with C-PHONE™

Designed with solid-state components, C-PHONE™ offers more high-performance features than any other communications system.

Modern communications on the water

• Sends and receives phone calls from all stations
• Functions as an intercom between stations
• Two-line system expandable to 12 stations

More features than most other communication systems

• Handset-controlled hailer volume allows volume to be adjusted to three levels-low, medium and high
• Serves as a paging, security alert and fog horn system when used with 8 ohm weatherproof hailer horn
• Distinctive ring identification-outside calls identified by a single (land line) or double (cellular) ring, and intercom calls distinguished by triple ring
• Selective privacy ringing that directs all incoming calls to one station

Stay connected while underway with cellular option

• Accesses cellular lines with optional transceiver/interface unit
• Makes and receives outside calls while on the water
• Rugged, extruded aluminum I-beam style transceiver chassis
• Option includes single station cellular telephone system, transceiver/interface unit and all necessary wiring and instructions

Superior technology guarantees top performance

• Microprocessor controlled with solid-state components
• Design proven against extreme humidity, mechanical shock, vibration, temperature, thermal shock and dust

Easy to install and use

• No special wiring or separate phone and intercom sets required
• Use any phone-either tone or pulse system
• Designed to operate on 12, 24 or 36 VDC input voltages
• Only two conductors-tip and ring-go from master unit to each station