No longer will boat owners have to piece together unsafe, makeshift adapters, spend nights without power or listen to the generator run through the night. C-CABLE Smart "Y" - Adapters allow boat owners with single power cables to draw power from two shore power receptacles safely and intelligently.

Designed and engineered for long life, C-CABLE products are made of state-of-the-art materials and sealed with water-tight thermal bonds to stand up in the toughest marine environments.

Backed by the industry’s longest warranties.

Benefits:

No longer will boat owners have to piece together unsafe, makeshift adapters, spend nights without power or listen to the generator run through the night. C-CABLE Smart "Y" - Adapters allow boat owners with single power cables to draw power from two shore power receptacles safely and intelligently.

Designed and engineered for long life, C-CABLE products are made of state-of-the-art materials and sealed with water-tight thermal bonds to stand up in the toughest marine environments.

Backed by the industry’s longest warranties.

Benefits:

Smart-Y Adapter

Features
Charles’ Smart-Y Adapters enable boats to reliably double available shore voltage. Designed for long life, the Smart-Y eliminates the potential for shock hazard when one leg is disconnected; both legs must be plugged into the power source before current will flow. Smart-Y products will provide years of trouble-free use in the marine environment.

Benefits

The ISO-G2 provides reliable, affordable AC system protection and meets ABYC standards as a single-unit alternative to using a galvanic isolator/status monitor combination.

Function

The ISO-G2 provides reliable, affordable AC system protection and meets ABYC
standards as a single-unit alternative to using a galvanic isolator/status
monitor combination.

Function

C-Charger® 5000 Series
Marine Electronic Battery Chargers

C-CHARGER® 5000 Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, C-CHARGER® are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.

Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
  
• Tested for durability against static, impact, vibration and shock
  
• DC ammeter indicates the charge rate
  
• Ignition protected (USCG-33 CFR 183.410)
  
• AC and DC fuse protection

• Restores up to 3 individual battery banks simultaneously
  
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
  
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C

• Cooling fan only operates during peak current demands
  
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
  
• Exterior slots for easy mounting
  
• Easy access to terminal connections and fuses
  
• 5 Year warranty, made in the USA

C-Charger® 5000 Series
Marine Electronic Battery Chargers

C-CHARGER® 5000 Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, C-CHARGER® are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.

Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
  
• Tested for durability against static, impact, vibration and shock
  
• DC ammeter indicates the charge rate
  
• Ignition protected (USCG-33 CFR 183.410)
  
• AC and DC fuse protection

• Restores up to 3 individual battery banks simultaneously
  
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
  
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C

• Cooling fan only operates during peak current demands
  
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
  
• Exterior slots for easy mounting
  
• Easy access to terminal connections and fuses
  
• 5 Year warranty, made in the USA

C-Charger® 5000 Series
Marine Electronic Battery Chargers

C-CHARGER® 5000 Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, C-CHARGER® are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.

Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
  
• Tested for durability against static, impact, vibration and shock
  
• DC ammeter indicates the charge rate
  
• Ignition protected (USCG-33 CFR 183.410)
  
• AC and DC fuse protection

• Restores up to 3 individual battery banks simultaneously
  
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
  
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C

• Cooling fan only operates during peak current demands
  
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
  
• Exterior slots for easy mounting
  
• Easy access to terminal connections and fuses
  
• 5 Year warranty, made in the USA

C-Charger® 5000 Series
Marine Electronic Battery Chargers

C-CHARGER® 5000 Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, C-CHARGER® are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.

Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
  
• Tested for durability against static, impact, vibration and shock
  
• DC ammeter indicates the charge rate
  
• Ignition protected (USCG-33 CFR 183.410)
  
• AC and DC fuse protection

• Restores up to 3 individual battery banks simultaneously
  
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
  
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C

• Cooling fan only operates during peak current demands
  
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
  
• Exterior slots for easy mounting
  
• Easy access to terminal connections and fuses
  
• 5 Year warranty, made in the USA

C-Charger® 5000 Series
Marine Electronic Battery Chargers

C-CHARGER® 5000 Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, C-CHARGER® are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.

Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
  
• Tested for durability against static, impact, vibration and shock
  
• DC ammeter indicates the charge rate
  
• Ignition protected (USCG-33 CFR 183.410)
  
• AC and DC fuse protection

• Restores up to 3 individual battery banks simultaneously
  
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
  
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C

• Cooling fan only operates during peak current demands
  
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
  
• Exterior slots for easy mounting
  
• Easy access to terminal connections and fuses
  
• 5 Year warranty, made in the USA

C-Charger® 5000 Series
Marine Electronic Battery Chargers

C-CHARGER® 5000 Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, C-CHARGER® are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.

Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
  
• Tested for durability against static, impact, vibration and shock
  
• DC ammeter indicates the charge rate
  
• Ignition protected (USCG-33 CFR 183.410)
  
• AC and DC fuse protection

• Restores up to 3 individual battery banks simultaneously
  
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
  
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C

• Cooling fan only operates during peak current demands
  
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
  
• Exterior slots for easy mounting
  
• Easy access to terminal connections and fuses
  
• 5 Year warranty, made in the USA

C-Charger® 5000 Series
Marine Electronic Battery Chargers

C-CHARGER® 5000 Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, C-CHARGER® are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.

Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
  
• Tested for durability against static, impact, vibration and shock
  
• DC ammeter indicates the charge rate
  
• Ignition protected (USCG-33 CFR 183.410)
  
• AC and DC fuse protection

• Restores up to 3 individual battery banks simultaneously
  
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
  
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C

• Cooling fan only operates during peak current demands
  
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
  
• Exterior slots for easy mounting
  
• Easy access to terminal connections and fuses
  
• 5 Year warranty, made in the USA

C-Charger® 5000 Series
Marine Electronic Battery Chargers

C-CHARGER® 5000 Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, C-CHARGER® are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.

Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
  
• Tested for durability against static, impact, vibration and shock
  
• DC ammeter indicates the charge rate
  
• Ignition protected (USCG-33 CFR 183.410)
  
• AC and DC fuse protection

• Restores up to 3 individual battery banks simultaneously
  
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
  
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C

• Cooling fan only operates during peak current demands
  
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
  
• Exterior slots for easy mounting
  
• Easy access to terminal connections and fuses
  
• 5 Year warranty, made in the USA

C-Charger® 5000 Series
Marine Electronic Battery Chargers

C-CHARGER® 5000 Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, C-CHARGER® are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.

Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
  
• Tested for durability against static, impact, vibration and shock
  
• DC ammeter indicates the charge rate
  
• Ignition protected (USCG-33 CFR 183.410)
  
• AC and DC fuse protection

• Restores up to 3 individual battery banks simultaneously
  
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
  
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C

• Cooling fan only operates during peak current demands
  
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
  
• Exterior slots for easy mounting
  
• Easy access to terminal connections and fuses
  
• 5 Year warranty, made in the USA

C-Charger® 5000 Series
Marine Electronic Battery Chargers

C-CHARGER® 5000 Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, C-CHARGER® are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.

Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
  
• Tested for durability against static, impact, vibration and shock
  
• DC ammeter indicates the charge rate
  
• Ignition protected (USCG-33 CFR 183.410)
  
• AC and DC fuse protection

• Restores up to 3 individual battery banks simultaneously
  
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
  
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C

• Cooling fan only operates during peak current demands
  
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
  
• Exterior slots for easy mounting
  
• Easy access to terminal connections and fuses
  
• 5 Year warranty, made in the USA

C-Charger® 5000 Series
Marine Electronic Battery Chargers

C-CHARGER® 5000 Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, C-CHARGER® are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.

Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
  
• Tested for durability against static, impact, vibration and shock
  
• DC ammeter indicates the charge rate
  
• Ignition protected (USCG-33 CFR 183.410)
  
• AC and DC fuse protection

• Restores up to 3 individual battery banks simultaneously
  
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
  
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C

• Cooling fan only operates during peak current demands
  
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
  
• Exterior slots for easy mounting
  
• Easy access to terminal connections and fuses
  
• 5 Year warranty, made in the USA

C-Charger® 5000 Series
Marine Electronic Battery Chargers

C-CHARGER® 5000 Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, C-CHARGER® are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.

Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
  
• Tested for durability against static, impact, vibration and shock
  
• DC ammeter indicates the charge rate
  
• Ignition protected (USCG-33 CFR 183.410)
  
• AC and DC fuse protection

• Restores up to 3 individual battery banks simultaneously
  
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
  
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C

• Cooling fan only operates during peak current demands
  
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
  
• Exterior slots for easy mounting
  
• Easy access to terminal connections and fuses
  
• 5 Year warranty, made in the USA

5000 SP Series Marine Electronic Battery Chargers

5000 SP Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosian-resistant, anodized aluminum housing, the units are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector swtich. This feature allows the boater to charge either lead acid, gel or AGM batteries.

Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
  
• Tested for durability against static, impact, vibration and shock
  
• DC ammeter indicates the charge rate
  
• Ignition protected (USCG-33 CFR 183.410)
  
• AC and DC fuse protection
  

C-Charger® 5000 Series
Marine Electronic Battery Chargers

C-CHARGER® 5000 Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, C-CHARGER® are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.

Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
  
• Tested for durability against static, impact, vibration and shock
  
• DC ammeter indicates the charge rate
  
• Ignition protected (USCG-33 CFR 183.410)
  
• AC and DC fuse protection

• Restores up to 3 individual battery banks simultaneously
  
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
  
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C

• Cooling fan only operates during peak current demands
  
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
  
• Exterior slots for easy mounting
  
• Easy access to terminal connections and fuses
  
• 5 Year warranty, made in the USA

C-Charger® 5000 Series
Marine Electronic Battery Chargers

C-CHARGER® 5000 Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, C-CHARGER® are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.

Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
  
• Tested for durability against static, impact, vibration and shock
  
• DC ammeter indicates the charge rate
  
• Ignition protected (USCG-33 CFR 183.410)
  
• AC and DC fuse protection

• Restores up to 3 individual battery banks simultaneously
  
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
  
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C

• Cooling fan only operates during peak current demands
  
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
  
• Exterior slots for easy mounting
  
• Easy access to terminal connections and fuses
  
• 5 Year warranty, made in the USA

C-Charger® 5000 Series
Marine Electronic Battery Chargers

C-CHARGER® 5000 Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, C-CHARGER® are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.

Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
  
• Tested for durability against static, impact, vibration and shock
  
• DC ammeter indicates the charge rate
  
• Ignition protected (USCG-33 CFR 183.410)
  
• AC and DC fuse protection

• Restores up to 3 individual battery banks simultaneously
  
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
  
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C

• Cooling fan only operates during peak current demands
  
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
  
• Exterior slots for easy mounting
  
• Easy access to terminal connections and fuses
  
• 5 Year warranty, made in the USA

C-Charger® 5000 Series
Marine Electronic Battery Chargers

C-CHARGER® 5000 Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, C-CHARGER® are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.

Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
  
• Tested for durability against static, impact, vibration and shock
  
• DC ammeter indicates the charge rate
  
• Ignition protected (USCG-33 CFR 183.410)
  
• AC and DC fuse protection

• Restores up to 3 individual battery banks simultaneously
  
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
  
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C

• Cooling fan only operates during peak current demands
  
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
  
• Exterior slots for easy mounting
  
• Easy access to terminal connections and fuses
  
• 5 Year warranty, made in the USA

C-Charger® 5000 Series
Marine Electronic Battery Chargers

C-CHARGER® 5000 Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, C-CHARGER® are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.

Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
  
• Tested for durability against static, impact, vibration and shock
  
• DC ammeter indicates the charge rate
  
• Ignition protected (USCG-33 CFR 183.410)
  
• AC and DC fuse protection

• Restores up to 3 individual battery banks simultaneously
  
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
  
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C

• Cooling fan only operates during peak current demands
  
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
  
• Exterior slots for easy mounting
  
• Easy access to terminal connections and fuses
  
• 5 Year warranty, made in the USA

C-Charger® 5000 Series
Marine Electronic Battery Chargers

C-CHARGER® 5000 Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, C-CHARGER® are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.

Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
  
• Tested for durability against static, impact, vibration and shock
  
• DC ammeter indicates the charge rate
  
• Ignition protected (USCG-33 CFR 183.410)
  
• AC and DC fuse protection

• Restores up to 3 individual battery banks simultaneously
  
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
  
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C

• Cooling fan only operates during peak current demands
  
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
  
• Exterior slots for easy mounting
  
• Easy access to terminal connections and fuses
  
• 5 Year warranty, made in the USA

C-Charger® 5000 Series
Marine Electronic Battery Chargers

C-CHARGER® 5000 Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, C-CHARGER® are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.

Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
  
• Tested for durability against static, impact, vibration and shock
  
• DC ammeter indicates the charge rate
  
• Ignition protected (USCG-33 CFR 183.410)
  
• AC and DC fuse protection

• Restores up to 3 individual battery banks simultaneously
  
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
  
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C

• Cooling fan only operates during peak current demands
  
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
  
• Exterior slots for easy mounting
  
• Easy access to terminal connections and fuses
  
• 5 Year warranty, made in the USA

C-Charger® 5000 Series
Marine Electronic Battery Chargers

C-CHARGER® 5000 Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, C-CHARGER® are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.

Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
  
• Tested for durability against static, impact, vibration and shock
  
• DC ammeter indicates the charge rate
  
• Ignition protected (USCG-33 CFR 183.410)
  
• AC and DC fuse protection

• Restores up to 3 individual battery banks simultaneously
  
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
  
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C

• Cooling fan only operates during peak current demands
  
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
  
• Exterior slots for easy mounting
  
• Easy access to terminal connections and fuses
  
• 5 Year warranty, made in the USA

C-Charger® 5000 Series
Marine Electronic Battery Chargers

C-CHARGER® 5000 Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, C-CHARGER® are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.

Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
  
• Tested for durability against static, impact, vibration and shock
  
• DC ammeter indicates the charge rate
  
• Ignition protected (USCG-33 CFR 183.410)
  
• AC and DC fuse protection

• Restores up to 3 individual battery banks simultaneously
  
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
  
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C

• Cooling fan only operates during peak current demands
  
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
  
• Exterior slots for easy mounting
  
• Easy access to terminal connections and fuses
  
• 5 Year warranty, made in the USA

C-Charger® 5000 Series
Marine Electronic Battery Chargers

C-CHARGER® 5000 Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, C-CHARGER® are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.

Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
  
• Tested for durability against static, impact, vibration and shock
  
• DC ammeter indicates the charge rate
  
• Ignition protected (USCG-33 CFR 183.410)
  
• AC and DC fuse protection

• Restores up to 3 individual battery banks simultaneously
  
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
  
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C

• Cooling fan only operates during peak current demands
  
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
  
• Exterior slots for easy mounting
  
• Easy access to terminal connections and fuses
  
• 5 Year warranty, made in the USA

C-Charger® 5000 Series
Marine Electronic Battery Chargers

C-CHARGER® 5000 Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, C-CHARGER® are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.

Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
  
• Tested for durability against static, impact, vibration and shock
  
• DC ammeter indicates the charge rate
  
• Ignition protected (USCG-33 CFR 183.410)
  
• AC and DC fuse protection

• Restores up to 3 individual battery banks simultaneously
  
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
  
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C

• Cooling fan only operates during peak current demands
  
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
  
• Exterior slots for easy mounting
  
• Easy access to terminal connections and fuses
  
• 5 Year warranty, made in the USA

C-Charger® 5000 Series
Marine Electronic Battery Chargers

C-CHARGER® 5000 Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, C-CHARGER® are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.

Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
  
• Tested for durability against static, impact, vibration and shock
  
• DC ammeter indicates the charge rate
  
• Ignition protected (USCG-33 CFR 183.410)
  
• AC and DC fuse protection

• Restores up to 3 individual battery banks simultaneously
  
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
  
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C

• Cooling fan only operates during peak current demands
  
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
  
• Exterior slots for easy mounting
  
• Easy access to terminal connections and fuses
  
• 5 Year warranty, made in the USA

C-Charger® 5000 Series
Marine Electronic Battery Chargers

C-CHARGER® 5000 Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, C-CHARGER® are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.

Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
  
• Tested for durability against static, impact, vibration and shock
  
• DC ammeter indicates the charge rate
  
• Ignition protected (USCG-33 CFR 183.410)
  
• AC and DC fuse protection

• Restores up to 3 individual battery banks simultaneously
  
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
  
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C

• Cooling fan only operates during peak current demands
  
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
  
• Exterior slots for easy mounting
  
• Easy access to terminal connections and fuses
  
• 5 Year warranty, made in the USA

C-Charger® 5000 Series
Marine Electronic Battery Chargers

C-CHARGER® 5000 Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.

Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, C-CHARGER® are built to last, performing in the toughest of marine environments. Charles 5000 SP battery chargers feature a battery type selector switch. This feature allows the boater to charge either lead acid, gel, or AGM batteries.

Marine UL listing ensures durability and safety

• Only complete line of battery chargers approved by Marine UL’s stringent specifications, testing and evaluation
  
• Tested for durability against static, impact, vibration and shock
  
• DC ammeter indicates the charge rate
  
• Ignition protected (USCG-33 CFR 183.410)
  
• AC and DC fuse protection

• Restores up to 3 individual battery banks simultaneously
  
• Internal temperature compensation (12V 30-100 amp models and 24V 20-60 amp models) automatically adjusts output to precisely charge batteries according to ambient conditions

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
  
• Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C

• Cooling fan only operates during peak current demands
  
• Virtually no RFI or EMI interference exceeds FCC/Class B requirements

• Battery selector switch allows charger to be used with lead acid, gel, or AGM batteries
  
• Exterior slots for easy mounting
  
• Easy access to terminal connections and fuses
  
• 5 Year warranty, made in the USA

2000 SP Series Marine Electronic Battery Chargers

2000 SP Series Marine Electronic Battery Chargers are an excellent choice for value-priced, high performance DC charging. This Series units include a battery type selector switch allowing you to charge Lead Acid, GEL or AGM batteries. 3-stage charging delivers the greatest charge when the battery is most able to accept it, preventing overcharging and extending battery life. Units restore up to 3 banks simultaneously.

Other features include the ability to act as a power supply, ignition and reverse-polarity protected, easy-to-read DC ammeter, corrosion-resistant components and housing, and a heavy-duty heat sink design. Exterior slots allow for easy mounting. 2-year limited manufacturer’s warranty. Made in the USA.

Multi-step charging provides maximum efficiency

• Restores up to 3 individual battery banks simultaneously
  
• Prevents overcharging and damage, extending the life of the battery
  

• Constructed of tough, anodized aluminum housing that stands up to teh elements-including extreme heat, humidity, and salt air
  
• Circuit boards with UL-recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C
  

• Effective heat sink eliminates the need for cooling fans on lower wattage units
  
• Reduced RFI or EMI interference - meets FCC/Class A requirements
  

2000 SP Series Marine Electronic Battery Chargers

2000 SP Series Marine Electronic Battery Chargers are an excellent choice for value-priced, high performance DC charging. This Series units include a battery type selector switch allowing you to charge Lead Acid, GEL or AGM batteries. 3-stage charging delivers the greatest charge when the battery is most able to accept it, preventing overcharging and extending battery life. Units restore up to 3 banks simultaneously.

Other features include the ability to act as a power supply, ignition and reverse-polarity protected, easy-to-read DC ammeter, corrosion-resistant components and housing, and a heavy-duty heat sink design. Exterior slots allow for easy mounting. 2-year limited manufacturer’s warranty. Made in the USA.

Multi-step charging provides maximum efficiency

• Restores up to 3 individual battery banks simultaneously
  
• Prevents overcharging and damage, extending the life of the battery
  

• Constructed of tough, anodized aluminum housing that stands up to teh elements-including extreme heat, humidity, and salt air
  
• Circuit boards with UL-recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C
  

• Effective heat sink eliminates the need for cooling fans on lower wattage units
  
• Reduced RFI or EMI interference - meets FCC/Class A requirements
  

2000 SP Series Marine Electronic Battery Chargers

2000 SP Series Marine Electronic Battery Chargers are an excellent choice for value-priced, high performance DC charging. This Series units include a battery type selector switch allowing you to charge Lead Acid, GEL or AGM batteries. 3-stage charging delivers the greatest charge when the battery is most able to accept it, preventing overcharging and extending battery life. Units restore up to 3 banks simultaneously.

Other features include the ability to act as a power supply, ignition and reverse-polarity protected, easy-to-read DC ammeter, corrosion-resistant components and housing, and a heavy-duty heat sink design. Exterior slots allow for easy mounting. 2-year limited manufacturer’s warranty. Made in the USA.

Multi-step charging provides maximum efficiency

• Restores up to 3 individual battery banks simultaneously
  
• Prevents overcharging and damage, extending the life of the battery
  

• Constructed of tough, anodized aluminum housing that stands up to teh elements-including extreme heat, humidity, and salt air
  
• Circuit boards with UL-recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C
  

• Effective heat sink eliminates the need for cooling fans on lower wattage units
  
• Reduced RFI or EMI interference - meets FCC/Class A requirements
  

2000 SP Series Marine Electronic Battery Chargers

2000 SP Series Marine Electronic Battery Chargers are an excellent choice for value-priced, high performance DC charging. This Series units include a battery type selector switch allowing you to charge Lead Acid, GEL or AGM batteries. 3-stage charging delivers the greatest charge when the battery is most able to accept it, preventing overcharging and extending battery life. Units restore up to 3 banks simultaneously.

Other features include the ability to act as a power supply, ignition and reverse-polarity protected, easy-to-read DC ammeter, corrosion-resistant components and housing, and a heavy-duty heat sink design. Exterior slots allow for easy mounting. 2-year limited manufacturer’s warranty. Made in the USA.

Multi-step charging provides maximum efficiency

• Restores up to 3 individual battery banks simultaneously
  
• Prevents overcharging and damage, extending the life of the battery
  

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity, and salt air
  
• Circuit boards with UL-recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C
  

• Effective heat sink eliminates the need for cooling fans on lower wattage units
  
• Reduced RFI or EMI interference - meets FCC/Class A requirements
  

2000 SP Series Marine Electronic Battery Chargers

2000 SP Series Marine Electronic Battery Chargers are an excellent choice for value-priced, high performance DC charging. This Series units include a battery type selector switch allowing you to charge Lead Acid, GEL or AGM batteries. 3-stage charging delivers the greatest charge when the battery is most able to accept it, preventing overcharging and extending battery life. Units restore up to 3 banks simultaneously.

Other features include the ability to act as a power supply, ignition and reverse-polarity protected, easy-to-read DC ammeter, corrosion-resistant components and housing, and a heavy-duty heat sink design. Exterior slots allow for easy mounting. 2-year limited manufacturer’s warranty. Made in the USA.

Multi-step charging provides maximum efficiency

• Restores up to 3 individual battery banks simultaneously
  
• Prevents overcharging and damage, extending the life of the battery
  

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity, and salt air
  
• Circuit boards with UL-recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C
  

• Effective heat sink eliminates the need for cooling fans on lower wattage units
  
• Reduced RFI or EMI interference - meets FCC/Class A requirements
  

2000 SP Series Marine Electronic Battery Chargers

2000 SP Series Marine Electronic Battery Chargers are an excellent choice for value-priced, high performance DC charging. This Series units include a battery type selector switch allowing you to charge Lead Acid, GEL or AGM batteries. 3-stage charging delivers the greatest charge when the battery is most able to accept it, preventing overcharging and extending battery life. Units restore up to 3 banks simultaneously.

Other features include the ability to act as a power supply, ignition and reverse-polarity protected, easy-to-read DC ammeter, corrosion-resistant components and housing, and a heavy-duty heat sink design. Exterior slots allow for easy mounting. 2-year limited manufacturer’s warranty. Made in the USA.

Multi-step charging provides maximum efficiency

• Restores up to 3 individual battery banks simultaneously
  
• Prevents overcharging and damage, extending the life of the battery
  

• Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity, and salt air
  
• Circuit boards with UL-recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C
  

• Effective heat sink eliminates the need for cooling fans on lower wattage units
  
• Reduced RFI or EMI interference - meets FCC/Class A requirements
  

The AC Master Control Maximizes AC Input Capabilities. The Product Automatically Transfer Loads from Multiple Inlets and Multiple Generators (Maximum of 4 Inputs) on 50 and 100 AMP, 250 VAC Electrical Systems

The AC Master Control Maximizes AC Input Capabilities. The Product Automatically Transfer Loads from Multiple Inlets and Multiple Generators (Maximum of 4 Inputs) on 50 and 100 AMP, 250 VAC Electrical Systems

When properly installed, Charles Marine Isolation transformers will electrically isolate the AC shore power from the boat’s AC power system. The boat’s electrical system and the grounding conductor are not actually connected to the shore-side power. There is no direct electrical connection between earth-grounded shore AC power and the onboard electrical system. The shore ground is connected to a shield that is wound between the primary (shore) and the secondary (boat) transformer winding. The connection of this grounding wire only to the shield of the transformer isolates the boat’s AC electrical system from shore.

Compliance with independent testing lab requirements maximize safety

When properly installed, Charles Marine Isolation transformers will electrically isolate the AC shore power from the boat’s AC power system. The boat’s electrical system and the grounding conductor are not actually connected to the shore-side power. There is no direct electrical connection between earth-grounded shore AC power and the onboard electrical system. The shore ground is connected to a shield that is wound between the primary (shore) and the secondary (boat) transformer winding. The connection of this grounding wire only to the shield of the transformer isolates the boat’s AC electrical system from shore.

Compliance with independent testing lab requirements maximize safety

When properly installed, Charles Marine Isolation transformers will electrically isolate the AC shore power from the boat’s AC power system. The boat’s electrical system and the grounding conductor are not actually connected to the shore-side power. There is no direct electrical connection between earth-grounded shore AC power and the onboard electrical system. The shore ground is connected to a shield that is wound between the primary (shore) and the secondary (boat) transformer winding. The connection of this grounding wire only to the shield of the transformer isolates the boat’s AC electrical system from shore.

Compliance with independent testing lab requirements maximize safety

When properly installed, Charles Marine Isolation transformers will electrically isolate the AC shore power from the boat’s AC power system. The boat’s electrical system and the grounding conductor are not actually connected to the shore-side power. There is no direct electrical connection between earth-grounded shore AC power and the onboard electrical system. The shore ground is connected to a shield that is wound between the primary (shore) and the secondary (boat) transformer winding. The connection of this grounding wire only to the shield of the transformer isolates the boat’s AC electrical system from shore.

Compliance with independent testing lab requirements maximize safety

When properly installed, Charles Marine Isolation transformers will electrically isolate the AC shore power from the boat’s AC power system. The boat’s electrical system and the grounding conductor are not actually connected to the shore-side power. There is no direct electrical connection between earth-grounded shore AC power and the onboard electrical system. The shore ground is connected to a shield that is wound between the primary (shore) and the secondary (boat) transformer winding. The connection of this grounding wire only to the shield of the transformer isolates the boat’s AC electrical system from shore.

Compliance with independent testing lab requirements maximize safety

When properly installed, Charles Marine Isolation transformers will electrically isolate the AC shore power from the boat’s AC power system. The boat’s electrical system and the grounding conductor are not actually connected to the shore-side power. There is no direct electrical connection between earth-grounded shore AC power and the onboard electrical system. The shore ground is connected to a shield that is wound between the primary (shore) and the secondary (boat) transformer winding. The connection of this grounding wire only to the shield of the transformer isolates the boat’s AC electrical system from shore.

Compliance with independent testing lab requirements maximize safety

When properly installed, Charles Marine Isolation transformers will electrically isolate the AC shore power from the boat’s AC power system. The boat’s electrical system and the grounding conductor are not actually connected to the shore-side power. There is no direct electrical connection between earth-grounded shore AC power and the onboard electrical system. The shore ground is connected to a shield that is wound between the primary (shore) and the secondary (boat) transformer winding. The connection of this grounding wire only to the shield of the transformer isolates the boat’s AC electrical system from shore.

Compliance with independent testing lab requirements maximize safety

When properly installed, Charles Marine Isolation transformers will electrically isolate the AC shore power from the boat’s AC power system. The boat’s electrical system and the grounding conductor are not actually connected to the shore-side power. There is no direct electrical connection between earth-grounded shore AC power and the onboard electrical system. The shore ground is connected to a shield that is wound between the primary (shore) and the secondary (boat) transformer winding. The connection of this grounding wire only to the shield of the transformer isolates the boat’s AC electrical system from shore.

Compliance with independent testing lab requirements maximize safety

Today boaters are offered a wide variety of onboard electronics and electrical products for their vessels. Many of these products are adversely affected by spikes or surges of voltage. On land we protect valuable electronics such as computers with surge protectors. Charles has designed surge protection devices specifically for onboard marine use. These products protect the AC and DC systems. A third protection device protects against EMI interference.

Features:

Today boaters are offered a wide variety of onboard electronics and electrical products for their vessels. Many of these products are adversely affected by spikes or surges of voltage. On land we protect valuable electronics such as computers with surge protectors. Charles has designed surge protection devices specifically for onboard marine use. These products protect the AC and DC systems. A third protection device protects against EMI interference.

Features:

Today boaters are offered a wide variety of onboard electronics and electrical products for their vessels. Many of these products are adversely affected by spikes or surges of voltage. On land we protect valuable electronics such as computers with surge protectors. Charles has designed surge protection devices specifically for onboard marine use. These products protect the AC and DC systems. A third protection device protects against EMI interference.

Features:

Today boaters are offered a wide variety of onboard electronics and electrical products for their vessels. Many of these products are adversely affected by spikes or surges of voltage. On land we protect valuable electronics such as computers with surge protectors. Charles has designed surge protection devices specifically for onboard marine use. These products protect the AC and DC systems. A third protection device protects against EMI interference.

Features:

Today boaters are offered a wide variety of onboard electronics and electrical products for their vessels. Many of these products are adversely affected by spikes or surges of voltage. On land we protect valuable electronics such as computers with surge protectors. Charles has designed surge protection devices specifically for onboard marine use. These products protect the AC and DC systems. A third protection device protects against EMI interference.

Features:

InCharger Programmable Battery Chargers

Industrial & Workboat Battery Charger

The InCharger is a rugged, state-of-the-art industrial and workboat battery charger designed with an ultimate man-machine interface to custom fit your application. Constructed from industrial grade anodized aluminum, the InCharger is specifically designed to perform in the most demanding environments. The units universal AC input and configuration for Gel, Flooded Lead Acid, AGM or NiCAD batteries with 12 or 24 VDC selectable output makes the InCharger a one-stop purchasing decision for industrial customers.

The InCharger is easily customized to any application by simple programming selections on the units bright, fully digital touch-screen display. Unique charging parameters are stored on the InChargers Smart Memory Button, creating easy setup and tailored operation of the charger for specific industrial applications.

Features:

• Microprocessor controlled, single-bank, pulse charger
  
• Rugged anodized aluminum case
  
• Automatic sensing AC input - 120/208/240 VAC
  
• Universal 12/24 VDC output
  
• Configurable for Gel, Flooded Lead Acid, AGM or NiCad batteries
  
• Soft touch controls allow charger to be configured for practically any application
  
• Programmable memory button allows custom charge parameters, display name, etc.
  
• Computer controlled charging profiles maximize battery life
  
• Unique dead battery auto recovery
  
• Quick install removable connectors
  
• Made in the U.S.A.

• Operating Temperature: -40°C to +65°C (no derating)
  
• Output: 12VDC/24VDC User Selectable
  
• Input: 120/208/240 VAC Auto Select
  
• UL 1236/1546 and NFPA 99/110 Certified

InCharger Programmable Battery Chargers

Industrial & Workboat Battery Charger

The InCharger is a rugged, state-of-the-art industrial and workboat battery charger designed with an ultimate man-machine interface to custom fit your application. Constructed from industrial grade anodized aluminum, the InCharger is specifically designed to perform in the most demanding environments. The units universal AC input and configuration for Gel, Flooded Lead Acid, AGM or NiCAD batteries with 12 or 24 VDC selectable output makes the InCharger a one-stop purchasing decision for industrial customers.

The InCharger is easily customized to any application by simple programming selections on the units bright, fully digital touch-screen display. Unique charging parameters are stored on the InChargers Smart Memory Button, creating easy setup and tailored operation of the charger for specific industrial applications.

Features:

• Microprocessor controlled, single-bank, pulse charger
  
• Rugged anodized aluminum case
  
• Automatic sensing AC input - 120/208/240 VAC
  
• Universal 12/24 VDC output
  
• Configurable for Gel, Flooded Lead Acid, AGM or NiCad batteries
  
• Soft touch controls allow charger to be configured for practically any application
  
• Programmable memory button allows custom charge parameters, display name, etc.
  
• Computer controlled charging profiles maximize battery life
  
• Unique dead battery auto recovery
  
• Quick install removable connectors
  
• Made in the U.S.A.

• Operating Temperature: -40°C to +65°C (no derating)
  
• Output: 12VDC/24VDC User Selectable
  
• Input: 120/208/240 VAC Auto Select
  
• UL 1236/1546 and NFPA 99/110 Certified

InCharger Programmable Battery Chargers

Industrial & Workboat Battery Charger

The InCharger is a rugged, state-of-the-art industrial and workboat battery charger designed with an ultimate man-machine interface to custom fit your application. Constructed from industrial grade anodized aluminum, the InCharger is specifically designed to perform in the most demanding environments. The units universal AC input and configuration for Gel, Flooded Lead Acid, AGM or NiCAD batteries with 12 or 24 VDC selectable output makes the InCharger a one-stop purchasing decision for industrial customers.

The InCharger is easily customized to any application by simple programming selections on the units bright, fully digital touch-screen display. Unique charging parameters are stored on the InChargers Smart Memory Button, creating easy setup and tailored operation of the charger for specific industrial applications.

Features:

• Microprocessor controlled, single-bank, pulse charger
  
• Rugged anodized aluminum case
  
• Automatic sensing AC input - 120/208/240 VAC
  
• Universal 12/24 VDC output
  
• Configurable for Gel, Flooded Lead Acid, AGM or NiCad batteries
  
• Soft touch controls allow charger to be configured for practically any application
  
• Programmable memory button allows custom charge parameters, display name, etc.
  
• Computer controlled charging profiles maximize battery life
  
• Unique dead battery auto recovery
  
• Quick install removable connectors
  
• Made in the U.S.A.

• Operating Temperature: -40°C to +65°C (no derating)
  
• Output: 12VDC/24VDC User Selectable
  
• Input: 120/208/240 VAC Auto Select
  
• UL 1236/1546 and NFPA 99/110 Certified

HQ Series Battery Charger

Marine UL Battery Chargers that meet ABS and USCG requirements for megayacht and workboat fleets around the world.

• Agency approvals: Meets ABS (38G), Marine UL (1236), US Coast Guard (10B) and ABYC (A-31) requirements
  
• LED indicator pilot lamp
  
• Quick disconnect on/off switch on front cover
  
• Separate voltmeter and ammeter
  
• Internal failure alarm (ready), customer to provide indicator
  
• Multi-bank (3), multi-stage (bulk, absorption and float) battery charger
  
• Ability to work as power supply
  
• Voltage and current limiting ability
  
• Thermal, over-current, ignition and reverse-polarity protected
  
• Input and output fusing
  
• Constructed with heavy-duty, corrosion resistant, UL recognized materials
  
• Designed to run cool, quite and EMI/RFI interference free
  
• Temperature compensation - built for optimal performance in a variety of ambient temperatures
  
• AC input: 120vac
  
• DC output: 12vdc
  
• 50/60Hz for international and U.S.A. applications
  
• Drip shield (necessary) included
  
• 5-year manufacturers limited warranty
  
• Made in the U.S.A.

HQ Series Battery Charger

Marine UL Battery Chargers that meet ABS and USCG requirements for megayacht and workboat fleets around the world.

• Agency approvals: Meets ABS (38G), Marine UL (1236), US Coast Guard (10B) and ABYC (A-31) requirements
  
• LED indicator pilot lamp
  
• Quick disconnect on/off switch on front cover
  
• Separate voltmeter and ammeter
  
• Internal failure alarm (ready), customer to provide indicator
  
• Multi-bank (3), multi-stage (bulk, absorption and float) battery charger
• Ability to work as power supply
  
• Voltage and current limiting ability
  
• Thermal, over-current, ignition and reverse-polarity protected
  
• Input and output fusing
  
• Constructed with heavy-duty, corrosion resistant, UL recognized materials
  
• Designed to run cool, quite and EMI/RFI interference free
  
• Temperature compensation - built for optimal performance in a variety of ambient temperatures
  
• AC input: 120vac
  
• DC output: 12vdc
  
• 50/60Hz for international and U.S.A. applications
  
• Drip shield (necessary) included
  
• 5-year manufacturers limited warranty
  
• Made in the U.S.A.

HQ Series Battery Charger

Marine UL Battery Chargers that meet ABS and USCG requirements for megayacht and workboat fleets around the world.

• Agency approvals: Meets ABS (38G), Marine UL (1236), US Coast Guard (10B) and ABYC (A-31) requirements
  
• LED indicator pilot lamp
  
• Quick disconnect on/off switch on front cover
  
• Separate voltmeter and ammeter
  
• Internal failure alarm (ready), customer to provide indicator
  
• Multi-bank (3), multi-stage (bulk, absorption and float) battery charger
• Ability to work as power supply
  
• Voltage and current limiting ability
  
• Thermal, over-current, ignition and reverse-polarity protected
  
• Input and output fusing
  
• Constructed with heavy-duty, corrosion resistant, UL recognized materials
  
• Designed to run cool, quite and EMI/RFI interference free
  
• Temperature compensation - built for optimal performance in a variety of ambient temperatures
  
• AC input: 120vac
  
• DC output: 12vdc
  
• 50/60Hz for international and U.S.A. applications
  
• Drip shield (necessary) included
  
• 5-year manufacturers limited warranty
  
• Made in the U.S.A.

HQ Series Battery Charger

Marine UL Battery Chargers that meet ABS and USCG requirements for megayacht and workboat fleets around the world.

• Agency approvals: Meets ABS (38G), Marine UL (1236), US Coast Guard (10B) and ABYC (A-31) requirements
  
• LED indicator pilot lamp
  
• Quick disconnect on/off switch on front cover
  
• Separate voltmeter and ammeter
  
• Internal failure alarm (ready), customer to provide indicator
  
• Multi-bank (3), multi-stage (bulk, absorption and float) battery charger
  
• Ability to work as power supply
  
• Voltage and current limiting ability
  
• Thermal, over-current, ignition and reverse-polarity protected
  
• Input and output fusing
  
• Constructed with heavy-duty, corrosion resistant, UL recognized materials
  
• Designed to run cool, quite and EMI/RFI interference free
  
• Temperature compensation - built for optimal performance in a variety of ambient temperatures
  
• AC input: 120vac
  
• DC output: 24vdc
  
• 50/60Hz for international and U.S.A. applications
  
• Drip shield (necessary) included
  
• 5-year manufacturers limited warranty
  
• Made in the U.S.A.

HQ Series Battery Charger

Marine UL Battery Chargers that meet ABS and USCG requirements for megayacht and workboat fleets around the world.

• Agency approvals: Meets ABS (38G), Marine UL (1236), US Coast Guard (10B) and ABYC (A-31) requirements
  
• LED indicator pilot lamp
  
• Quick disconnect on/off switch on front cover
  
• Separate voltmeter and ammeter
  
• Internal failure alarm (ready), customer to provide indicator
  
• Multi-bank (3), multi-stage (bulk, absorption and float) battery charger
  
• Ability to work as power supply
  
• Voltage and current limiting ability
  
• Thermal, over-current, ignition and reverse-polarity protected
  
• Input and output fusing
  
• Constructed with heavy-duty, corrosion resistant, UL recognized materials
  
• Designed to run cool, quite and EMI/RFI interference free
  
• Temperature compensation - built for optimal performance in a variety of ambient temperatures
  
• AC input: 120 vac
  
• DC output: 24vdc
  
• 50/60Hz for international and U.S.A. applications
  
• Drip shield (necessary) included
  
• 5-year manufacturers limited warranty
  
• Made in the U.S.A.

HQ Series Battery Charger

Marine UL Battery Chargers that meet ABS and USCG requirements for megayacht and workboat fleets around the world.

• Agency approvals: Meets ABS (38G), Marine UL (1236), US Coast Guard (10B) and ABYC (A-31) requirements
  
• LED indicator pilot lamp
  
• Quick disconnect on/off switch on front cover
  
• Separate voltmeter and ammeter
  
• Internal failure alarm (ready), customer to provide indicator
  
• Multi-bank (3), multi-stage (bulk, absorption and float) battery charger
  
• Ability to work as power supply
  
• Voltage and current limiting ability
  
• Thermal, over-current, ignition and reverse-polarity protected
  
• Input and output fusing
  
• Constructed with heavy-duty, corrosion resistant, UL recognized materials
  
• Designed to run cool, quite and EMI/RFI interference free
  
• Temperature compensation - built for optimal performance in a variety of ambient temperatures
  
• AC input: 120 vac
  
• DC output: 24vdc
  
• 50/60Hz for international and U.S.A. applications
  
• Drip shield (necessary) included
  
• 5-year manufacturers limited warranty
  
• Made in the U.S.A.

IMC Chargers are state-of-the-art battery chargers specifically created for harsh marine environments. Their rugged design, configurable settings and revolutionary "man-machine" interface make these chargers the first choice for serious boaters.

The IMC Series features Universal AC Input with automatic configuration that accepts 50Hz or 60Hz input frequency and 90 to 265 VAC input voltage, and four (4) bank programmable DC Output with independent 12/24 VDC selection. The intuitive user menu allows for fast configuration of battery voltage (12 or 24 VDC), as well as battery type (Lead Acid, AGM, Gel Cell, NiCad), on each individual bank.

In addition, the charging output amperage may be adjusted on any bank to accommodate lower amperage requirements of a specific on-board electrical system; such as the bow thruster and/or windlass compartments.

FEATURES

CHARGING SYSTEMS

IMC Chargers are state-of-the-art battery chargers specifically created for
harsh marine environments. Their rugged design, configurable settings and
revolutionary "man-machine" interface make these chargers the first choice
for serious boaters.

The IMC Series features Universal AC Input with automatic configuration that
accepts 50Hz or 60Hz input frequency and 90 to 265 VAC input voltage, and
four (4) bank programmable DC Output with independent 12/24 VDC selection.
The intuitive user menu allows for fast configuration of battery voltage (12
or 24 VDC), as well as battery type (Lead Acid, AGM, Gel Cell, NiCad), on
each individual bank.

In addition, the charging output amperage may be adjusted on any bank to
accommodate lower amperage requirements of a specific on-board electrical
system; such as the bow thruster and/or windlass compartments.

FEATURES

CHARGING SYSTEMS

IMC Chargers are state-of-the-art battery chargers specifically created for
harsh marine environments. Their rugged design, configurable settings and
revolutionary "man-machine" interface make these chargers the first choice
for serious boaters.

The IMC Series features Universal AC Input with automatic configuration that
accepts 50Hz or 60Hz input frequency and 90 to 265 VAC input voltage, and
four (4) bank programmable DC Output with independent 12/24 VDC selection.
The intuitive user menu allows for fast configuration of battery voltage (12
or 24 VDC), as well as battery type (Lead Acid, AGM, Gel Cell, NiCad), on
each individual bank.

In addition, the charging output amperage may be adjusted on any bank to
accommodate lower amperage requirements of a specific on-board electrical
system; such as the bow thruster and/or windlass compartments.

FEATURES

CHARGING SYSTEMS