M-1-R Gasoline Fume Detector

An ideal single channel gasoline fume detector, the M-1-R features high-tech styling, compact size, circuitry Test and alarm horn Mute functions.

The power on indicator lamp automatically increases in brightness during daylight and softens at night.

The M-1-R package includes a standard two-inch display unit with gasoline sensor and twenty feet of plug-together lead.

• In addition to gas fumes, the M-1-R can also detect high concentrations of battery hydrogen or engine exhaust
  
• Installation is quick and simple
  
• Available in black
  
• 2" gauge

M-2A-R Gasoline Fume Detector

The M-2A-R gas fume detector features include two-channel monitoring capability, plug-in sensors (second sensor optional), fault light alarm, fault lights to indicate a malfunction in either the module or one of the sensors.

A "press to test" button for each channel indicates either an OK or Danger condition.

An Alarm Silence button deactivates the alarm horn.

• A microprocessor-controlled, two-channel gasoline fume detector in a low profile, water resistant design.
  
• The system is calibrated to eliminate most nuisance alarms while allowing enough time to take action.

MB-1-R Gasoline Fume Detector

Single channel gasoline fume detector, with the same features as the M-1-R:

• High-tech styling
  
• Compact size
  
• Circuitry Test
  
• Alarm horn mute functions

• In addition to gas fumes, the MB-1-R can also detect high concentrations of battery hydrogen or engine exhaust
  
• Indicator lamp automatically increases in brightness during daylight and softens at night

MB-2-R Gasoline Fume Detector

Includes the features of the M-2A:

• Microprocessor-controlled
  
• Low profile, water resistant design
  
• Two-channel monitoring capability
  
• Plug-in sensors (second sensor optional)
  
• Fault light alarm

• The MB-2-R system also includes a test button at the display module to activate the warning lamp, alarm horn and blower motor
  
• Alarm silence button deactivates the alarm horn calibrated to eliminate most nuisance alarms while allowing enough time to take action

Model CMD-4MR-RLY

The CMD-4MR-RLY is the most advanced CO detector available from Fireboy-Xintex.

It features automatic generator shutdown capability.

When dangerous CO levels are detected, the CMD-4MR-RLY shuts down the generator, a common source of CO.

This detector also features multiple location warning, allowing up to six detectors to be linked in series. When one detector alarms, all connected detectors will alarm to alert boat inhabitants in other locations to the presence of CO. Features a state-of-the-art sensor that is unaffected by common cleaning solvents.

• 12 VDC operation
  
• Low current draw
  
• UL 2034 Listed for Marine use.

Smoke & Fire Alarm

General purpose smoke and fire alarm for boats and RV’s

• Meets the requirement of NFPA 302 stating that "All vessels 26 feet or more in length with accommodation spaces intended for sleeping shall be equipped with a single station smoke alarm that is listed to UL217 for recreational vehicles..."
  
  
  
• Dimensions: 4.25" Diameter, 1.75" height
  
• Alarm 85db
  
• Listing: UL 217 for RV’s
  
• Complies with U.S. Coast Guard Section 28.325(b) and Section 181.450 inclusive
  
  
  
• Uses the ionization principle of detection for detecting fast-flaming fires which consume combustible materials rapidly and spread quickly
  
  
  
• 9v battery operated (battery included); no wiring required for easy installation
  
  
  
• Low battery alarm features audible beeps to indicate a battery replacement is required
  
  
  
• Incorporates an internationally recognized horn signal for evacuation. During the alarm mode, the horn produces three short beeps followed by a two second pause and then repeats.
  
  
  
• Features a test button that is easily accessible on the cover of the alarm
  
  
  
• Recommended installation is to install one unit in each sleeping accommodation, salon, galley, engine/generator room, and electrical control room
  

S-1A Propane Detector w/ Plug-In Sensor and Solenoid Valve

This is a simple, single channel propane fume detector that features a plug-in sensor and a Var-A-Brite indicator lamp that brightens during the day and soften at night.

Complete unit includes display module, one propane sensor and 20 feet of connector wire.

• The standard two-inch display module features a circuitry test and alarm horn silence function
  
• On / off switch opens and closes solenoid with the touch of a button

S-1A-NV Propane Detector w/ Plug-In Sensor
(Does NOT include valve)

This is a simple, single channel propane fume detector that features a plug-in sensor and a Var-A-Brite indicator lamp that brightens during the day and soften at night.

Complete unit includes display module, one propane sensor and 20 feet of connector wire.

• The standard two-inch display module features a circuitry test and alarm horn silence function
  
• On / off switcch opens and closes solenoid with the touch of a button

S-2A Propane / CNG Monitor and Control

The S-2A propane monitor / controller features include low current draw, plug-in sensors (second sensor optional), display module fault light / alarm and fault light / alarm to indicate a malfunction in either one of the sensors. (Fault indicators show that the module or sensors are not working and may need repair.)

MS-2 sensor and 1 SV-1 solenoid valve included.

The system is calibrated at 20% LEL (lower explosive limit) to eliminate most nuisance alarms while allowing enough time to take action.

• A microprocessor-controlled two-channel monitor with automatic solenoid valve on / off switch
  
• A "press to test" button for each channel confirms function
  
• Module size: 4-3/4" x 3-3/4" x 7/8"

The S-2A-NV propane monitor/controller features include low current draw, plug-in sensors (second sensor optional), display module fault light/alarm to indicate a malfunction in either one of the sensors. (Fault indicators show that the module or sensors are not working and may need repair).

Solenoid valve not included.

Features: