FLIR Ocean Pro Marine Thermal Monocular

• Up to 500 m visibility, even in the dark
• Wide 32 deg field of view for maximum coverage and faster area sweeps
• Rugged and reliable with IP67 rating and 2 m drop protection
• Easy-to-use menu, requiring minimal training
• Wireless video streaming through Scout Pro App (iOS only)
• Navigate at night with confidence
• Avoid obstacles, floating debris and navigate safer
• Locate navigation aids
• Find people or pets in the water

FLIR Ocean Scout Pro provides exceptional imagery by day or night using a high-resolution 640 x 480 thermal sensor with a fast 30 Hz refresh rate and high-resolution viewfinder. Combined, these features give Ocean Scout Pro outstanding long-range performance with the ability to detect a human-sized target at 500-meters. A wide 32 deg field of view enables rapid area scanning, locating people in the water, or spotting navigation aids and hazards.

The Ocean Scout Pro includes a tactical storage pouch compatible with MOLLE webbing, USB-C charge/interface cable, wrist lanyard, two rubber eyecups, and a quick start guide. An internal lithium-ion battery provides up to 6 hours of runtime. The USB-C cable provides charging and enables file transfer to a connected PC.

FLIR MD324 Compact Fixed View Marine Thermal Camera

• DISPLAYS HEAT, NOT LIGHT: The MD324’s 320 × 240 resolution thermal sensor reveals vessels and obstacles in total darkness and even midday glare.
• SIMPLE TO MOUNT: A compact, all weather, water proof enclosure provides easy mounting.
• SIMPLE TO MOUNT: A compact, all weather, water proof enclosure provides easy mounting.
• 2 Year Warranty

The MD-Series is an affordable, compact, fixed-mounted thermal night vision system that helps with steering around obstacles, collision avoidance, and finding people in the water at night. Simple to mount and easy to integrate into your existing electronics, MD-Series outputs standard analog video that can be easily displayed on almost any monitor at the helm or other locations on the vessel.

• Single payload camera with 320 x 240 pixel microbolometer
• 25 foot analog video cable (308-0164-25)
• 25 foot shielded Ethernet cable (308-0163-25)
• Weather proof Ethernet coupler (4115028)
• PoE Injector (4113746)
• Mounting Hardware
• Operator’s Manual

FLIR MD625 Compact Fixed View Marine Thermal Camera

• The MD625’s 640 x 480 resolution thermal sensor reveals vessels and obstacles in total darkness and even midday glare.
• A compact, all weather, water proof enclosure provides easy mounting.
• The MD625 is Ethernet-enabled for simple integration into your vessel’s existing electronics.

The MD-Series is an affordable, compact fixed-mounted thermal night vision system that helps with steering around obstacles, collision avoidance, and finding people in the water at night. Simple to mount and easy to integrate into your existing electronics, MD-Series outputs standard analog video that can be easily displayed on almost any monitor at the helm or other locations on the vessel.

MD-Series

This affordable, fixed-mount thermal night vision system helps with steering around obstacles, collision avoidance and finding people in the water at night. Simple to mount and easy to integrate into your existing electronics, MD-Series display can be mounted separately on your dashboard, or the feed can be integrated into an existing display to save space.

Key Features

• Available in 320 x 240 ( MD324 ) and 640 x 480 (MD625) resolutions
• 2x e-zoom standard; 4x e-zoom included on MD-625
• Ethernet-enabled for simple integration into your current electronics
• Slim profile (7" high and only three pounds) makes for an unobtrusive mount

Use a single application to control all of your FLIR Thermal imaging, night vision, and infrared cameras from your iPad or iPhone. The app allows for intuitive control with natural gestures, featuring:

• Automatic discovery and configuration
• Quick browsing of your cameras with a single finger scroll gesture
• Night/thermal/TV signal switch with a single touch of a button
• Video recording and snapshot capturing
   

Note: At least one properly configured Nexus-enabled sensor device by FLIR is needed for this app to work. This application does not make us of your iPhone, iPad, or iPod camera.

Ways to control the MD Series Zoom, scene, color, etc.:

• Use Joystick Control unit for M-Series #500-0395-00 (Includes Joystick Control Unit with weather cover, and mounting hardware)
• If you have a WiFi network set up you can use the Free FLIR app.
• Certain Raymarine C and E displays via Ethernet.

In the box:

• Single payload camera with 320 x 240 pixel microbolometer
• 25 foot analog video cable (308-0164-25)
• 25 foot shielded Ethernet cable (308-0163-25)
• Weather proof Ethernet coupler (4115028)
• PoE Injector (4113746)
• Mounting Hardware
• Operator’s Manual, Installation Guide on CD
• Joystick Control Unit p/n 500-0395-00

FLIR JCU3 Compact Control Unit for M132/232

FLIR’s JCU-3 Joystick Controller works with select Thermal Camera Systems to allow full access to the camera’s pan, tilt, zoom and menu settings. The JCU-3 features 9 buttons plus a rotary controller and joystick trackpad in a compact housing the fits just about anywhere. The JCU-3 can be mounted either horizontally or vertically using either of the 2 supplied key faces.

The JCU-3 is rugged and waterproof for mounting in the pilothouse or on-deck. It can be surface or flush mounted to your helm, console or bulkhead. Multiple JCU-3 controllers can be installed to allow control of a single camera from several different locations onboard.

The JCU-3’s keypad and rotary knob are backlit for easy viewing at night. The JCU-3 can bepowered over Ethernet from the vessel’s onboard network, or connected directly to a 12V DC power source and interfaced to the camera with an Ethernet connection. The JCU-3 is compatible with FLIR M100, M200, M400, M-Series, MD-Series as well as Raymarine T200, T300and T400 camera systems.

• JCU3
• Power cable
• Network Cable
• Mounting Hardware

FLIR AX8 Thermal Monitoring Camera

• State-of-the-art thermal monitoring of engines and onboard machinery
• Powered by Lepton, FLIR’s most advanced micro thermal camera
• Exclusive Multi-Spectral Dynamic Imaging (MSX(R)) for easy-to-understand thermal imagery.
• Stream live thermal video of exhaust manifolds, propeller shafts, electrical panels, and other machinery
• Program specific areas to generate automated spot alarms when temperatures exceed pre-set thresholds
• Evaluate ongoing temperature trends
• Help avoid costly repairs and unwanted breakdowns
• View thermal, visible, and MSX video imagery on Raymarine LightHouse IITM MFDs
• Continuous thermal monitoring with audible and visual alarms across the Raymarine network
• Connect up to eight AX8 cameras using Ethernet
• View and record thermal video and snapshots from any Raymarine display on the network
• Easy setup and alarm programming with a PC and web browser

Gain an entirely new view of your vessel’s mechanical system with the new FLIR AX8 thermal monitoring camera. Combining thermal and visible cameras in a small, affordable package, the AX8 integrates with Raymarine multifunction displays (MFDs) and sends audible and visual alerts when the temperature of machine parts rise above preset thresholds.

Keep a watchful eye on such critical equipment as engines, exhaust manifolds, and shaft bearings and spot problems before they leave you stranded on the water. And FLIR’s exclusive MSX(R) imaging blends visible and thermal images for more detailed imagery that is easier to understand.

• Infrared camera with lens
• Pinted documentation
• User documentation CD-ROM
• Cooling/mounting plate
• POE injector
• Camera PoE Cable
• Raymarine RayNet Ethernet cable

FLIR M232 Thermal IP Camera (320 x 240, 9Hz) with Pan, Tilt and electronic zoom

• Thermal Resolution - 320 × 240 resolution for clear, detailed images
• Ethernet-Enabled - Ethernet-enabled for simple integration with your other electronics
• Zoom - 2× e-Zoom for extended range performance
• Tilt - M100 with adjustable tilt

The FLIR M200 marine thermal camera is FLIRs smallest and most affordable pan and tilt marine thermal night vision camera. Using FLIRs latest generation Boson(TM) thermal core, the M200 lets boaters see at night in 320 x 240 thermal resolution and also features 2x digital zoom. When the M200 is combined with a Raymarine Axiom MFD, FLIR’s new ClearCruiseTM intelligent thermal analytics technology offer boaters an entirely new level of awareness and safety. The M200 also use IP video technology and simplifies installation by eliminating extra video signal cables. The M200 offers features 2X digital zoom capability.

The M200 improves navigation and safety by helping you see bridges, docks, buoys, and other vessels, night and day. The M200 also helps boaters find people in the water faster than using spotlights and radar alone.

M200 features full 320x240 resolution for optimal horizon-to-horizon viewing, and 2X digital zoom for long-range performance.

The combination of the M200’s small, lightweight design and IP video connectivity make it a snap to install and integrate with multiple MFDs.

Combine M200 with a Raymarine Axiom MFD and take advantage of ClearCruiseTM intelligent thermal analytics. ClearCruiseTM provides audible and visual alerts when "non-water" objects such as boats, obstacles, or navigation markers are identified in the scene.

• Thermal camera
• Thermal camera base-seal
• Fasterns x 3
• 2 x Self-adhesive decals (for ball-down mounting only)
• *RayNet-to-RJ45 adapter cable (100 mm)
• *Right-angled RayNet-to-RayNet cable (10 m)
• Right-angled 3-pin power cable (10 m) Top-down riser kit (includes riser, riser base seal, and riser mounting template
• Documentation pack
• *The supplied right-angled RayNet and Power cables are suitable for mounting on surfaces up to 25.4 mm (1.0 inch) thick. When mounting on thicker surfaces, you may need to use RayNet and Power cables with straight connectors (available separately).

FLIR M364C Dual Payload

Thermal Camera No JCU 640 x 480 24D HFoV

Featuring a high definition low light camera and one of the most advanced FLIR thermal imaging cores, the M364C and M364C-LR provide an elite level of awareness on the water. Both cameras use multispectral imaging to deliver exclusive FLIR Color Thermal VisionTM (CTV) technology. Color Thermal Vision blends visible camera details with a thermal image, overlaying vital color imagery that allows captains to positively identify navigation aids and other vessels within the thermal scene. Outstanding imaging performance, intelligent object recognition technology, and enhanced gyro-stabilization make the M364C and M364-LR indispensable tools for law enforcement professionals, commercial mariners, and serious recreational boaters.

Thermal and visible imaging featuring FLIR Color Thermal Vision and MSX(R).

Low light HD visible imaging sensor and long-range zoom offer enhanced target identification.

Two-axis mechanical stabilization virtually eliminates the effects of pitch, heave, and yaw.

• M364C Camera unit
• Camera base-seal
• Camera gasket
• RayNet-to-RJ45 adaptor cable 120 mm (4.72 in.)
• Right-angled RayNet-to-RayNet cable 3 m (9.8 ft.)
• Right-angled BNC-to-BNC cable 3 m (9.8 ft.)
• Right-angled 3-pin power cable 3 m (9.8 ft.)
• Mounting riser
• 3 x camera xings: nuts, dome nuts, spring and at washers, threaded studs
• 2 x self-adhesive decals (for ball-down mounting only)
• Documentation pack

FLIR M364C Dual Payload

Thermal Camera No JCU 640 x 480 18D HFoV

Featuring a high definition low light camera and one of the most advanced FLIR thermal imaging cores, the M364C and M364C-LR provide an elite level of awareness on the water. Both cameras use multispectral imaging to deliver exclusive FLIR Color Thermal VisionTM (CTV) technology. Color Thermal Vision blends visible camera details with a thermal image, overlaying vital color imagery that allows captains to positively identify navigation aids and other vessels within the thermal scene. Outstanding imaging performance, intelligent object recognition technology, and enhanced gyro-stabilization make the M364C and M364-LR indispensable tools for law enforcement professionals, commercial mariners, and serious recreational boaters.

Thermal and visible imaging featuring FLIR Color Thermal Vision and MSX(R).

Low light HD visible imaging sensor and long-range zoom offer enhanced target identification.

Two-axis mechanical stabilization virtually eliminates the effects of pitch, heave, and yaw.

• M364C LR Camera
• Camera base seal
• Camera gasket
• RayNet-to-RJ45 adaptor cable 120 mm (4.72 in.)
• Right-angled RayNet-to-RayNet cable 3 m (9.8 ft.
• Right-angled BNC-to-BNC cable 3 m (9.8 ft.)
• Right-angled 3-pin power cable 3 m (9.8 ft.)
• Mounting riser
• 3x camera fixings: nuts, dome nuts, spring and flat washers, threaded studs
• 2 x self-adhesive decals (for ball-down mounting only)
• Documentation pac

FLIR M364 SinglePayload

Thermal Camera No JCU 640 x 480 24D HFoV

Pairing a rugged, all-weather design with one of the most advanced FLIR thermal imaging cores, the M332 and M364 deliver awareness-enhancing thermal vision for law enforcement, commercial, and recreational applications. Advanced gyro-stabilization and high-performance thermal imaging detect obstacles and targets in complete darkness and heavy seas, allowing safe navigation in the most challenging conditions.

Thermal imaging offers vision in complete darkness, glare, and light fog.

Two-axis mechanical stabilization virtually eliminates the effects of pitch, heave, and yaw.

Exceptional connectivity with navigation and security systems.

• M364 Camera
• Camera base-seal
• Camera gasket
• RayNet-to-RJ45 adaptor cable 120 mm (4.72 in.)
• Right-angled RayNet-to-RayNet cable 3 m (9.8 ft.)
• Right-angled BNC-to-BNC cable 3 m (9.8 ft.)
• Right-angled 3-pin power cable 3 m (9.8 ft.)
• Mounting riser
• 3 x camera fixings: nuts, dome nuts, spring and flat washers, threaded studs

FLIR M332 Single Payload Thermal Camera No JCU 320 x 256 24D HFoV

Pairing a rugged, all-weather design with one of the most advanced FLIR thermal imaging cores, the M332 and M364 deliver awareness-enhancing thermal vision for law enforcement, commercial, and recreational applications. Advanced gyro-stabilization and high-performance thermal imaging detect obstacles and targets in complete darkness and heavy seas, allowing safe navigation in the most challenging conditions.

Thermal imaging offers vision in complete darkness, glare, and light fog.

Two-axis mechanical stabilization virtually eliminates the effects of pitch, heave, and yaw.

Exceptional connectivity with navigation and security systems.

• M332 Camera
• Camera base-seal
• Camera gasket
• RayNet-to-RJ45 adaptor cable 120 mm (4.72 in.)
• Right-angled RayNet-to-RayNet cable 3 m (9.8 ft.)
• Right-angled BNC-to-BNC cable 3 m (9.8 ft.)
• Right-angled 3-pin power cable 3 m (9.8 ft.)
• Mounting riser
• 9. 3 x camera fixings: nuts, dome nuts, spring and flat washers, threaded studs

FLIR M300C Single Payload HD Camera No JCU

Combining a high-performance visible marine camera with long-range optical zoom capability, the M300C offers positive target identification for law enforcement, commercial, and recreational applications. Advanced gyro-stabilization provides steady imaging in rough sea conditions and allows the M300C to monitor targets or hazards over long distances continuously. Exceptional low light performance from the M300C gives captains enhanced awareness once the sun dips below the horizon.

Low light HD visible imaging sensor and long-range zoom offer enhanced target identification

Two-axis mechanical stabilization virtually eliminates the effects of pitch, heave, and yaw.

Exceptional connectivity with navigation and security systems.

• M300C Camera
• Camera base-seal
• Camera gasket
• RayNet-to-RJ45 adaptor cable 120 mm (4.72 in.)
• Right-angled RayNet-to-RayNet cable 3 m (9.8 ft.)
• Right-angled BNC-to-BNC cable 3 m (9.8 ft.)
• Right-angled 3-pin power cable 3 m (9.8 ft.)
• Mounting riser
• 3 x camera fixings: nuts, dome nuts, spring and flat washers, threaded studs

FLIR JCU-4 remote Joystick Controller with Accessories

• Rugged, low profile 3-axis joystick for precision camera control in all conditions
• The 2.9 in color LCD and keypad simplify camera operation and offer easy access to the joystick setup menus
• Dimmable color LCD and back lit keypad preserves the operator’s vision during nighttime operations
• 3 custom keys for quick access to user-defined camera functions.
• Pair the JCU-4 with a FLIR marine camera and marine monitor to create a complete camera viewing and control solution
• Add the JCU-4 to an integrated chartplotter and camera system for a dedicated tactile camera control alternative.

The JCU-4 provides confident control of FLIR marine thermal and visible cameras. Pan, tilt, zoom, and control all the camera functions with JCU-4’s ergonomic keypad and responsive joystick control. Our premier FLIR joystick controller, the JCU-4 pairs seamlessly with FLIR marine thermal cameras and provides the operator a dedicated tactile camera control solution.

Designed by mariners, for mariners the JCU-4 is perfect for those who actively navigate using thermal technology and require dependable and intuitive control of their FLIR camera.

• JCU-4 (includes 4x screws and 4x mounting plates pre-fitted).
• Front cover.
• Weather cover.
• Documentation pack.
• Right-angled RayNet (Ethernet) to RJ45 adapter cable, 3 m (9.84 ft).
• Right-angled 3-pin power cable, 3 m (9.84 ft).