Connect Charge Inlet

Product Features

• For use with the Guest Connect Charge plug
  
• Exclusive molded notch on plug locks into inlet, eliminates rewiring
  
• Mounts from the rear using locking ring or from the front with 3 screws
  
• Low profile cap won’t catch fishing line
  
• Can be mounted almost anywhere on a boat
  
• Mounts easily to fiberglass and aluminum hulls
  
• Black

10 Amp Battery Charger

Part No. 2611A

Description

Total Amps: 10
Number of Outputs: 2
Amps per output: 5/5
Battery System: 2-12V or 24V
Output Voltage: 12V
DC Output: 2-4’ Cables w/ring terminals
Input Voltage: 100-130VDC/50-60Hz
AC Input: 6’ cord W/Connect Charge Plug
Dimensions: 7.75" x 5.50" x 2.42"
Weight: 5.6 Lbs.

20 Amp Dual Battery Application

Part No. 2620A

Description

Total Amps: 20 Amps
Number of Outputs: 2
Amps per output: 10/10
Battery System: 2-12V or 1-24V
Output Voltage: 12VDC per output
DC Output: 2 -6’ DC Outputs w/ring terminals
Input Voltage: 100-130VAC/50-60Hz
Input Connection: 6’ AC Cord w/Connect Charge Pro
Dimensions: 9.60" x 7.0" x 2.63"
Weight: 8.0 Lbs.

10 Amp Portable Charger

Part No. 2612A

Description

Total Amps: 10 Amps
Number of Outputs: 1
Amps per output: 10
Battery System: 1-12VDC
Output Voltage: 12V
DC Output: 4’ DC output wire w/ alligator clips
Input Voltage: 100-130VAC/50-60Hz
Input Connection: Standard 6" AC Cord
Dimensions: 5" x 5" x 2-1/4"
Weight: 6 Lbs.

25 Amp Battery Charger
2623A

• Total Amps: 25Amps
  
• Number of Outputs: 3
  
• Amps per output: 10/10/5
  
• Battery System: 2-12V or 1-24V
  
• Output Voltage: 12VDC per output
  
• DC Output: 3-6’ DC output cables w/terminal rings
  
• Input Voltage: 100-130VAC/50-60Hz
  
• Input Connection: 6’ AC Cord w/Connect Charge Plug
  
• Dimensions: 13.0" x 7.0" x 2.60"
  
• Weight: 13 Lbs.

• Ignition Protected
  
• Reverse Polartity Protected
  
• Short Circuit Protected
  
• 3-Stage Switching Electronic Circuit
  
• Maintenance Mode protects batteries during storage
  
• Fully Potted to Waterproof Electronics
  
• Vibration and Shock Protected
  
• Self-Proctecting under extreme ambient conditions
  
• For Flooded, Gel and AGM Batteries
  
• 2 - Year Limited Warranty
  
• Lifetime Warranty Against Water Damage
  
• Meets all Guest Harsh Environment Guidelines
  
• Models with AC Cables can be used with the ConnectCharge permanent mounting system

10 Amp Battery Charger

Part No. 2610A

Description

Total Amps: 10
Number of Outputs: 2
Amps per output: 5/5
Battery System: 2-12V
Output Voltage: 12V
DC Output: Studs for hardwire
Input Voltage: 100-130VDC/60Hz
AC: Studs for hardwire
Dimensions: 7.75" x 5.50" x 2.42"
Weight: 5.6 Lbs.

3 Amp Portable Charger

Part No. 2603

Description

Total Amps: 3 Amps
Number of Outputs: 1
Battery System: 1-12V
Output Voltage: 12VDC
DC Output: 4’ Output wires w/alligator clips
Input Voltage: 100-130VAC /50-60Hz
Input Connection: 6’AC cord w/standard plug
Dimensions: 3.1" x 3.5" x 2.34"
Weight: 1 Lb.

30 Amp Battery Charger

Part No. 2632A

Description

Total Amps: 30 Amps
Number of Outputs: 3
Amps per Output: 20/5/5
Battery System: 3-12V
Output Voltage: 12VDC per output
DC Output: Studs w/circuit breakers
Input Voltage: 100-130VAC/50-60Hz
Input Connection: Studs for Hardwire
Dimensions: 12.96" x 9.84" x 2.92"
Weight: 15.6 Lbs

15 Amp Three Battery Application Charger
2613A

• Total Amps: 15Amps
  
• Number of Outputs: 3
  
• Amps per output: 5/5/5
  
• Battery System: 2-12V or 1-24V
  
• Output Voltage: 12VDC per output
  
• DC Output: 2-4’ DC output cables w/terminal rings
  
• Input Voltage: 100-130VAC/50-60Hz
  
• Input Connection: 6’ AC Cord w/Connect Charge Plug
  
• Dimensions: 9.60" x 7.0" x 2.60"
  
• Weight: 8 Lbs.

30 Amp Battery Charger

Part No. 2631A

Description

Total Amps: 30 Amps
Number of Outputs: 3
Amps per output: 10/10/10
Battery System: 3-12V or 1-24V & 1-12V or 1-36V
Output Voltage: 12VDC per output
DC Output: 3-6’ DC outputs w/ring terminals
Input Voltage: 100-130VAC/50-60Hz
Input Connction: 6’ cord w/Connect Charge plug
Dimensions: 13.0" x 7.0" x 2.60"
Weight: 13 Lbs.

6 Amp Battery Charger

Introducing the Guest Intelligent Choice Battery Charger System. These chargers are the most advanced devices developed by Guest and feature a departure from the traditional Guest potted construction while maintaining the bullet proof quality that has made Guest the leader in charging systems. The brains of the new Intelligent Choice Charger are evidenced in the control center which is located at the top of the charger. This membrane covered panel is positioned for easy view of all functions and easy access to the user selectable buttons. The control center features easy to read LED Indicators of charge status, user selectable buttons to tailor the charge for specific battery types (AGM/Flooded or Gel) per output, and warning indicators to alert you before a serious problem. The heart of the electronics system is mounted on an anodized aluminum base to provide efficient heat dissipation and decreased weight. The circuits are coated in epoxy to protect the sensitive electronic components from water or vibration. The charger case is slotted on the sides to provide convection cooling of the anodized aluminum base plate while maintaining an IP65 Water Resistance standard. And, as part of an integrated battery charging/monitoring system, the new Intelligent Choice Battery Chargers will provide you with the most advanced and reliable system available today.

Features

• Total Amps: 6
  
• Number of Outputs: 1
  
• Amps per output: 6 Amps
  
• Battery System: 1 - 12 Volt
  
• Output Voltage: 12 Volts DC
  
• DC Output: 4’ cable with ring terminals
  
• Input Voltage: 100 - 130 Volts AC/60 Hz
  
• Input Connection: 6’ cable with Connect Charge plug

12 Amp Battery Charger

Introducing the Guest Intelligent Choice Battery Charger System. These chargers are the most advanced devices developed by Guest and feature a departure from the traditional Guest potted construction while maintaining the bullet proof quality that has made Guest the leader in charging systems. The brains of the new Intelligent Choice Charger are evidenced in the control center which is located at the top of the charger. This membrane covered panel is positioned for easy view of all functions and easy access to the user selectable buttons. The control center features easy to read LED Indicators of charge status, user selectable buttons to tailor the charge for specific battery types (AGM/Flooded or Gel) per output, and warning indicators to alert you before a serious problem. The heart of the electronics system is mounted on an anodized aluminum base to provide efficient heat dissipation and decreased weight. The circuits are coated in epoxy to protect the sensitive electronic components from water or vibration. The charger case is slotted on the sides to provide convection cooling of the anodized aluminum base plate while maintaining an IP65 Water Resistance standard. And, as part of an integrated battery charging/monitoring system, the new Intelligent Choice Battery Chargers will provide you with the most advanced and reliable system available today.

Features

• Total Amps: 12
  
• Number of Outputs: 2
  
• Amps per output: 6/6 Amps
  
• Battery System: 2 - 12 Volt, 24 Volt Series
• Input Voltage: 100 - 130 Volts AC/60 Hz
  
• Input Connection: 6’ cable with Connect Charge plug

18 Amp Battery Charger

Introducing the Guest Intelligent Choice Battery Charger System. These chargers are the most advanced devices developed by Guest and feature a departure from the traditional Guest potted construction while maintaining the bullet proof quality that has made Guest the leader in charging systems. The brains of the new Intelligent Choice Charger are evidenced in the control center which is located at the top of the charger. This membrane covered panel is positioned for easy view of all functions and easy access to the user selectable buttons. The control center features easy to read LED Indicators of charge status, user selectable buttons to tailor the charge for specific battery types (AGM/Flooded or Gel) per output, and warning indicators to alert you before a serious problem. The heart of the electronics system is mounted on an anodized aluminum base to provide efficient heat dissipation and decreased weight. The circuits are coated in epoxy to protect the sensitive electronic components from water or vibration. The charger case is slotted on the sides to provide convection cooling of the anodized aluminum base plate while maintaining an IP65 Water Resistance standard. And, as part of an integrated battery charging/monitoring system, the new Intelligent Choice Battery Chargers will provide you with the most advanced and reliable system available today.

Features

• Total Amps: 18
  
• Number of Outputs: 3
  
• Amps per output: 6/6/6 Amps
  
• Battery System: 3 - 12 Volt, 12 Volt + 24 Volt, 36 Volt
  
• Output Voltage: 12 Volts DC
  
• DC Output: 4’ cable with ring terminals
  
• Input Voltage: 100 - 130 Volts AC/60 Hz
  
• Input Connection: 6’ cable with Connect Charge plug

20 Amp Battery Charger

Introducing the Guest Intelligent Choice Battery Charger System. These chargers are the most advanced devices developed by Guest and feature a departure from the traditional Guest potted construction while maintaining the bullet proof quality that has made Guest the leader in charging systems. The brains of the new Intelligent Choice Charger are evidenced in the control center which is located at the top of the charger. This membrane covered panel is positioned for easy view of all functions and easy access to the user selectable buttons. The control center features easy to read LED Indicators of charge status, user selectable buttons to tailor the charge for specific battery types (AGM/Flooded or Gel) per output, and warning indicators to alert you before a serious problem. The heart of the electronics system is mounted on an anodized aluminum base to provide efficient heat dissipation and decreased weight. The circuits are coated in epoxy to protect the sensitive electronic components from water or vibration. The charger case is slotted on the sides to provide convection cooling of the anodized aluminum base plate while maintaining an IP65 Water Resistance standard. And, as part of an integrated battery charging/monitoring system, the new Intelligent Choice Battery Chargers will provide you with the most advanced and reliable system available today.

Features

• Total Amps: 20
  
• Number of Outputs: 2
  
• Amps per output: 10/10 Amps
  
• Battery System: 2 - 12 Volt, 24 Volt series
  
• Output Voltage: 12 Volts DC
  
• DC Output: 4’ cable with ring terminals
  
• Input Voltage: 100 - 130 Volts AC/60 Hz
  
• Input Connection: 6’ cable with Connect Charge plug

20 Amp Dual Battery Cruising Charger


Product Features:

• Total Amps:20
  
• Number of Outputs: 2
  
• Amps per output: 10/10
  
• Battery System: 2-12V
  
• Output Voltage: 12VDC per output
  
• Input Voltage: 100-130VAC/50-60Hz
  
• DC Output: Studs with circuit breakers
  
• Input Connection: Studs for Hardwire
  
• Weight: 10.8 Lbs.
  
• Dimensions: 9.84’ x 9.60’ x 2.92

6 Amp Battery Charger

Part No. 2608A

Features:

• For flooded, Gel and AGM Batteries
  
• Full Potted to Waterproof Electronics
  
• Maintenance mode protects batteries during storage
  
• Total Amps: 6
  
• Battery System: 1-12V
  
• Output Voltage: 12VDC
  
• Input Voltage: 100 130VDC/60Hz
  
• Input Connection: 6’ AC cord w/Connect Charge Plug
  
• DC: 4’ w/ring terminals
  
• Dimensions: 6.40" x 3.50" x 2.25"
  
• Weight: 2.0 lbs.
  
• Vibration and Shock Protected

Cruiser Series Battery Selector Switch with AFD

Part No. 2100

Description

Continuous Amps: 230
Momentary Amps: 345
Cable Lug Size: 3/8"
Color: Orange
Dimensions: 5-1/2"W x 2-5/8"

Diesel Power Battery Selector Switch

Part No. 2300A

Description

Continuous Amps: 360
Momentary Amps: 600
Cable Lug Size: 5/8"
Color: Gray
Dimensions: 5-1/2" sq x 3-1/2"H

Diesel Power Battery Heavy-Duty Switch

Part No. 2303A

Description

Continuous Amps: 450
Momentary Amps: 800
Cable Lug Size: 5/8"
Color: Gray
Dimensions: 5-1/2" sq x 3-1/2"H

Black Battery Selector Switch with AFD

Part No. 2110A

Description

Continuous Amps: 230
Momentary Amps: 345
Dimensions: 5"D x 2-3/4"H

Black Battery Selector Switch

Part No. 2111A

Description

Continuous Amps: 230
Momentary Amps: 345
Color: Black
Dimensions: 5"D x 2-3/4"H

Product Features:

Product Features:

• Voltage Rating: 115/230VAC
  
• Passes necessary AC ground current for shore power safety
  
• Frequency Rating: 50/60Hz
  
• Current Rating: 50/60A at 50 deg. C
  
• Operating Temp: -20 to 50 deg. C
  

Spot w/ Single Wire Remote

Part No. 500

Description
Amp Draw: 10 Amps
Operation: 12 Volt Halogen
Bulb: Replacable 100 watt Halogen bulb
Overall Dimensions: 10-3/8"H x 7-3/8"W x 9-1/4"D
Lamp Dimensions: 5-3/4"W x 6-1/4"D
Weight: 3-3/4 Lbs

Product Features

Halogen Spotlight Kit wJoystick Control

Part No. 22200

Description

Spot Power: 100,000
Amp Draw: 4 Amps
Operation: 12 Volt Halogen
Bulb: Replacable sealed beam
Lamp Dimensions: 9-3/16"H x 8-5/8"W x 8-11/16"L
Base Dimensions: 5" Diameter
Weight: 4.25 Lbs
Joystick control requires 1-5/8"H x 2-3/4"L cutout

5" Spotlight / Floodlight Kit

Part No. 22040A

Description

Spot Power: 72,000CP
Flood Power: 30,000CP
Amp Draw: 7 Amps
Operation: 12 Volt Incandescent
Bulb: Replaceable Incandescent
Lamp Dimensions: 9-1/2"H x 4-1/2"W x 7-1/2"L
Base Dimensions: 5-1/2"L x 3-1/2"W
Weight: 6 Lbs.

Spotlight w/Push Button Control

Part No. 502

Description
Amp Draw: 10 Amps
Operation: 12 Volt Halogen
Bulb: Replacable 100 watt Halogen bulb
Overall Dimensions: 10-3/8"H x 7-3/8"W x 9-1/4"D
Lamp Dimensions: 5-3/4"W x 6-1/4"D
Weight: 3-3/4 Lbs

Product Features

Spot/Flood w/ Console Control

Part No. 503

Description
Amp Draw: 10 Amps
Operation: 12 Volt Halogen
Bulb: Replaceable Halogen bulbs
Overall Dimensions: 10-3/8"H x 7-3/8"W x 9-1/4"D
Base Dimensions: 5-3/4"W x6-1/4"D
Weight: 3-3/4 Lbs

Product Features

Spot/Flood w/ Joystick Control

Part No. 503-1

Description
Amp Draw: 10 Amps
Operation: 12 Volt Halogen
Bulb: Replaceable Halogen bulbs
Overall Dimensions: 10-3/8"H x 7-3/8"W x 9-1/4"D
Base Dimensions: 5-3/4"W x6-1/4"D
Weight: 3-3/4 Lbs

Product Features

Spotlight w/Wireless Remote Control

Part No. 501

Description
Amp Draw: 10 Amps
Operation: 12 Volt Halogen
Bulb: Replacable 100 watt Halogen bulb
Overall Dimensions: 10-3/8"H x 7-3/8"W x 9-1/4"D
Lamp Dimensions: 5-3/4"W x 6-1/4"D
Weight: 3-3/4 Lbs

Product Features

Remote Control Xenon Spotlight

Part #:505

Description

• Powerful Xenon beam illuminates objects up to one mile away
  
• Easily replaceable Xenon bulb
  
• Tough UV stabilized construction
  
• Motorized remote control operation
  
• Light can be directed manually without damaging motors
  
• Weather resistant
  
• Includes wireless remote control
  
• Easy to install
  
• Low current draw
  
• One year warranty

Specifications

• Amp Draw: 10 Amps
• Operation: 12 Volt Halogen
• Bulb: Replacable 100 watt Halogen bulb
• Overall Dimensions: 10-3/8"H x 7-3/8"W x 9-1/4"D
• Lamp Dimensions: 5-3/4"W x 6-1/4"D
• Weight: 3-3/4 Lbs

Product Features

• Illuminates objects up to a mile away
• Marine grade construction
• Full One year warranty
• Light can be directed manually without damaging motors
• Replaceable Halogen bulb
• 15’ wiring harness included
• Push button console control mounts on the surface with 1/4" wiring outlet
• Wireless secondary station may be added
• Smaller diameter wiring harness is easy to install
• Water proof console cover

• Spot Power: 100,000
• Amp Draw: 4 Amps
• Operation: 12 Volt Halogen
• Bulb: Replacable sealed beam
• Lamp Dimensions:
• 9-3/16"H x 8-5/8"W x 8-11/16"L
• Base Dimensions: 5" Diameter
• Weight: 4.25 Lbs
• Joystick control requires 1-5/8"H x 2-3/4 "L cutout
• Corrosion-proof, impact resistant UV stabilized ABS
• One year warranty
• Remote operation with joy stick control
• Light can be directed manually without damaging motors
• Easy to retrofit, same footprint and wiring harness as our 22040A spotlight
• Spotlight kits includes joystick control and 15’ wiring cable with easy install plug ends
   

• Spot Power: 200,000 CP
• Flood Power: 50,000 CP
• Amp Draw: 10 Amps
• Operation: 12 Volt Incandescent
• Bulb: Replaceable Incandescent
• Lamp Dimensions: 11"H x 6"W x "L
• Base Dimensions: 5-1/2"L x 3-1/2"W
• Weight: 9.0 Lbs
• Joystick control requires 2-3/4" installation holes
• Remote control, joystick operation
• One year warranty
• Dual station option available
• Light can be directed manually without damaging motor
• 316 stainless steel base, 304 stainless steel head
• 15’ wiring cable with easy to install plug ends
   

• Spot Power: 72,000CP
• Flood Power: 30,000CP
• Amp Draw: 7 Amps
• Operation: 12 Volt Incandescent
• Bulb: Replaceable Incandescent
• Lamp Dimensions: 9-1/2"H x 4-1/2"W x 7-1/2"L
• Base Dimensions: 5-1/2"L x 3-1/2"W
• Weight: 6 Lbs.
• Joystick requires 2-3/4" installation holes
• Remote control, joystick operation
• One year warranty
• Dual station option available
• Light can be directed manually without damaging motor
• 316 Stainless steel base
   

Description
Operation: 12 volt DC
Draw: .8 Amps
Dimensions: 6-3/4"W x 5-1/6"H x 1-15/16quot L

Product Features

Fan folds out of the way when not in use
Rotating louver directs air flow
Mount on wall, ceiling or dash
Built-in on/off switch
Installation hardware included
one year warranty

Full cycle crimps on ANCOR connectors, recommended for Heat Shrink Connectors. Jaws are hardened 4150 steel with hardened centerless ground pins adjustable for wear. Capacity: Crimps terminals and connectors from 22 - 10 AWG /0.3-5 mm2 in three color-coded cavities.

• Dimensions: 12.0"W x 3.0"H x 0.50 "D
• Mounting holes: 6" center to center
• Mounting hardware: 1-3"gold plated bolt & nut 1-3"bronze bolt & nut 3-cooper washers
• Weight: 7.0 Lbs.
• For bonding, grounding and Loran use
• Improves performance of electronics and reduces RF interference
• Offers the best path for hull bonding without long runs of copper foil
• Equivalent to 40 square feet of copper foil
• Provides a direct, low resistance path for improved lighting protection
• Deters electrolysis and galvanic corrosion
• Sintered porous bronze sphere consturction for maximum conductivity in a compact size
• Low drag, non fouling shape
• Easy to install
• Conforms to ABYC standards
• Easy to clean with wire brush
   

• Continuous Amps: 600
• Momentary Amps: 1000
• Cable Lug Size: 5/8"
• Color: Gray
• Dimensions: 5-1/2" sq x 3-1/2"H
• Polycarbonate case
• For 6, 12, 24 or 36 Volt systems
• One year warranty
   

• Continuous Amps: 450
• Momentary Amps: 800
• Cable Lug Size: 5/8"
• Color: Gray
• Dimensions: 5-1/2" sq x 3-1/2"H
• Polycarbonate case
• For 6, 12, 24 or 36 Volt systems
• One year warranty
   

Product Features:

• For 6,12, 24 or 36V systems
• Updated color scheme and graphics make it easier to determine switch status
• Longer stud lengths for improved assembly and easier cable routing
• Built with heavy-duty copper sweep contacts to ensure positive circuit control
• Rugged internal components protected by a tough, impact resistant polycarbonate housing that is impervious to the elements

Continuous Amps: 360Momentary Amps: 600Cable Lug Size: 5/8’Color: GrayDimensions: 5-1/2’ sq x 3-1/2’H

Description
Continuous Amps: 230
Momentary Amps: 345
Color: Black
Dimensions: 5"D x 2-3/4"H
Heavy duty copper sweep contacts
"Make before break" contacts allow selection of all positions except "off" while engine is running
Use with 6, 12, 24 or 36 volt systems
New design is easy to retrofit into existing hole patterns
Built-in skirt protects connections
Exclusive flat 360 degree "sweep" contact design provides up to 60% more contact area than other switch designs
Surface or rear panel mounting
Marine grade construction
One year warranty

• Continuous Amps: 230
• Momentary Amps: 345
• Color: Black
• Dimensions: 5"D x 2-3/4"H
• Alternator field disconnect (AFD) allows selection of any positions, including "off" without damage to alternator or elecrical system. AFD is required on some electrical systems.
• Heavy duty copper sweep contacts
• "Make before break" contacts allow selection of all positions except "off" while engine is running
• Use with 6, 12, 24 or 36 volt systems
• New design is easy to retrofit into existing hole patterns
• Built-in skirt protects connections
• Exclusive flat 360 degree "sweep" contact design provides up to 60% more contact area than other switch designs
• Surface or rear panel mounting
• Marine grade construction
• One year warranty
   

• Continuous Amps: 230
• Momentary Amps: 345
• Cable Lug Size: 3/8"
• Color: Orange
• Dimensions: 5-1/2"W x 2-5/8"
• Polycarbonate case
• For 6, 12, 24 or 36 volt systems
• One year Warranty
   

• Continuous Amps: 230
• Momentary Amps: 345
• Cable Lug Size: 3/8"
• Color: Orange
• Dimensions: 5-1/2"W x 2-5/8"
• Alternator field disconnect (AFD) allows selection of any postion, including "off" without damage to alternator or electrical system
• Polycarbonate case
• For 6, 12, 24 or 36 volt systems
• One year Warranty
   

• Optimized heat sink design for maximum performance
• Minimized voltage drop across isolation barrier using Schottky type diodes
• Each output individually capable of carrying the full alternator load
• Fixed cable posts for secure connections
• Fully potted, marine grade construction
• Waterproof components for harsh environment performance - year after year

Usage: 1 Alternator / 2 Batteries
Max. Output per Alternator: 70 Amps
Operation: 12V to 48V
Dimensions: 5.4" x 4.5" x 2.6"

20 Amp Dual Output On-Board Battery Charger and Alternator Module - 24V SYSTEMS

Product Features:

COMPLETE SYSTEM TO EXTEND YOUR FISHING TIME! The new Charge Pro PLUS system combines a Guest charger with an alternator power module (VSR) to continuously charge the trolling motor or house battery while the engine is running. This one of-a-kind system allows energy which is normally wasted on a fully charged cranking (or starting) battery bank to be re-directed to the trolling motor or house battery bank - ensuring that all batteries are fully charged.

• Total Amps: 20
• Outputs: 2
• Amps per out: 10/10
• Battery System: 12V
• Input Voltage: 100 - 130VAC
• Output Voltage: 12V
• AC: 6’ AC cord w/ ConnectCharge
• DC: Studs
• Weight: 9.5 Lbs.
• Dimensions: 8.0" x 8.9" x 3"

20 Amp Dual Output On-Board Battery Charger and Alternator Module - 12V SYSTEMS

Product Features:

COMPLETE SYSTEM TO EXTEND YOUR FISHING TIME! The new Charge Pro PLUS system combines a Guest charger with an alternator power module (VSR) to continuously charge the trolling motor or house battery while the engine is running. This one of-a-kind system allows energy which is normally wasted on a fully charged cranking (or starting) battery bank to be re-directed to the trolling motor or house battery bank - ensuring that all batteries are fully charged.

• Total Amps: 20
• Outputs: 2
• Amps per out: 10
• Battery System: 12V
• Input Voltage: 100 - 130VAC
• Output Voltage: 12V
• AC: 6’ AC cord w/ ConnectCharge
• DC: Studs
• Weight: 6.0 Lbs.
• Dimensions: 8.0" x 8.9" x 3"

8 Amp Dual Output On-Board Battery Charger and Alternator Module - 24V SYSTEMS

Product Features:

COMPLETE SYSTEM TO EXTEND YOUR FISHING TIME! The new Charge Pro PLUS system combines a Guest charger with an alternator power module (VSR) to continuously charge the trolling motor or house battery while the engine is running. This one of-a-kind system allows energy which is normally wasted on a fully charged cranking (or starting) battery bank to be re-directed to the trolling motor or house battery bank - ensuring that all batteries are fully charged.

• Total Amps: 8
• Outputs: 2
• Amps per out: 4
• Battery System: 24V
• Input Voltage: 100 - 130VAC
• Output Voltage: 12V
• AC: 6’ AC cord w/ ConnectCharge
• DC: Studs
• Weight: 6.0 Lbs.
• Dimensions: 6.3" x 6.8" x 3"

8 Amp Dual Output On-Board Battery Charger and Alternator Module - 12V SYSTEMS

Product Features:

COMPLETE SYSTEM TO EXTEND YOUR FISHING TIME! The new Charge Pro PLUS system combines a Guest charger with an alternator power module (VSR) to continuously charge the trolling motor or house battery while the engine is running. This one of-a-kind system allows energy which is normally wasted on a fully charged cranking (or starting) battery bank to be re-directed to the trolling motor or house battery bank - ensuring that all batteries are fully charged.

• Total Amps: 8
• Outputs: 2
• Amps per out: 4
• Battery System: 12V
• Input Voltage: 100 - 130VAC
• Output Voltage: 12V
• AC: 6’ AC cord w/ ConnectCharge
• DC: Studs
• Weight: 6.0 Lbs.
• Dimensions: 6.3" x 6.8" x 3"

Description
Total Amps: 30 Amps
Number of Outputs: 3
Amps per output: 10/10/10
Battery System: 3-12V or 1-24V & 1-12V or 1-36V
Output Voltage: 12VDC per output
DC Output: 3-6’ DC outputs w/ring terminals
Input Voltage: 100-130VAC/50-60Hz
Input Connction: 6’ cord w/Connect Charge plug
Dimensions: 13.0" x 7.0" x 2.60"
Weight: 13 Lbs.

Product Features

Ignition Protected
Reverse Polarity Protected
Short Circuit Protected
3-Stage Switching Electronic Circuit
Maintenance Mode protects batteries during storage
Fully Potted to Waterproof Electronics
Vibration and Shock Protected
Self-Protecting under extreme ambient conditions
For Flooded, Gel and AGM Batteries
2 - Year Limited Warranty
Lifetime Warranty Against Water Damage
Meets all Guest Harsh Environment Guidelines
Each output is an independent charging system, insuring individual attention to each battery

Description

Total Amps: 25 Amps
Number of Outputs: 3
Amps per output: 10/10/5
Battery System: 2-12V or 1-24V
Output Voltage: 12VDC
DC Output: 3-6’ DC output cables w/ ring terminals
Input Voltage: 100-130VAC/50-60Hz
Input Connection: 6’ AC Cord w/connect Charge plug
Dimensions: 13.0" x 7.0" x 2.60"
Weight: 13 Lbs.

Product Features

• Ignition Protected
• Reverse Polartity Protected
• Short Circuit Protected
• 3-Stage Switching Electronic Circuit
• Maintenance Mode protects batteries during storage
• Fully Potted to Waterproof Electronics
• Vibration and Shock Protected
• Self-Protecting under extreme ambient conditions
• For Flooded, Gel and AGM Batteries
• 2 - Year Limited Warranty
• Lifetime Warranty Against Water Damage
• Meets all Guest Harsh Environment Guidelines
• Models with AC Cables can be used with the ConnectCharge permanent mounting system

Description

Total Amps: 20 Amps
Number of Outputs: 2
Amps per output: 10/10
Battery System: 2-12V or 1-24V
Output Voltage: 12VDC per output
DC Output: 2 -6’ DC Outputs w/ring terminals
Input Voltage: 100-130VAC/50-60Hz
Input Connection: 6’ AC Cord w/Connect Charge Pro
Dimensions: 9.60" x 7.0" x 2.63"
Weight: 8.0 Lbs.

Product Features

• Ignition Protected
• Reverse Polarity Protected
• Short Circuit Protected
• 3-Stage Switching Electronic Circuit
• Maintenance Mode protects batteries during storage
• Vibration and Shock Protected
• Self-Protecting under extreme ambient conditions
• For Flooded, Gel and AGM Batteries
• 2 - Year Limited Warranty
• Lifetime Warranty Against Water Damage
• Meets all Guest Harsh Environment Guidelines

• Meets all Guest Harsh Environment Guidelines
• Models with AC Cables can be used with the ConnectCharge permanent mounting system
• Lifetime Warranty Against Water Damage
• 2 - Year Limited Warranty
• For Flooded, Gel and AGM Batteries
• Self-Protecting under extreme ambient conditions
• Vibration and Shock Protected
• Fully Potted to Waterproof Electronics
• 3-Stage Switching Electronic Circuit
• Maintenance Mode protects batteries during storage
• Short Circuit Protected
• Ignition Protected
• Reverse Polarity Protected

Description

Total Amps: 10
Number of Outputs: 2
Amps per output: 5/5
Battery System: 2-12V
Output Voltage: 12V
DC Output: Studs for hardwire
Input Voltage: 100-130VDC/60Hz
AC: Studs for hardwire
Dimensions: 7.75" x 5.50" x 2.42"
Weight: 5.6 Lbs.

Product Features

• Ignition Protected
• Reverse Polarity Protected
• Short Circuit Protected
• 3-Stage Switching Electronic Circuit
• Maintenance Mode protects batteries during storage
• Fully Potted to Waterproof Electronics
• Vibration and Shock Protected
• Self-Protecting under extreme ambient conditions
• For Flooded, Gel and AGM Batteries
• 2 - Year Limited Warranty
• Lifetime Warranty Against Water Damage
• Meets all Guest Harsh Environment Guidelines
• Charges two independent 12 volt batteries

Description
Total Amps: 6 Amps
Number of Outputs: 1
Amps per output: 6
Battery System: 1-12V
Output Voltage: 12VDC per output
DC Output: 1 - 4’ output cable with ring terminals
Input Voltage: 100-130vVAC/60Hz
Input Connection: 6’ AC Cord w/Connect Charge Plug
DC: 4’ w/ring terminals
Dimensions: 6.40" x 3.50" x 2.25"
Weight: 4 Lbs.

Total Amps: .5
Number of Outputs: 1
Battery System: 1-12V
Output Voltage: 12VDC
DC Output: 1 -6’ Output cables with alligator clips
Input Voltage: 100-130VAC 60Hz
Input Connection: Standard Plug
Weight: .5 Lbs.

Product Features

• Reverse Polarity Protected
• Short Circuit Protected
• 3 -Stage Switching Electronic Circuit
• Maintenance Mode protects batteries during storage
• Fully Potted to Waterproof Electronic
• Vibration and Shock Protected
• Self-Proctecting under extreme ambient conditions
• For Flooded, Gel and AGM batteries
• 2 - Year Limited Warranty
• Lifetime Warranty Against Water Damage
• Meets all Guest Harsh Environment Guidelines

Description
Introducing the Guest Intelligent Choice Battery Charger System. These chargers are the most advanced devices developed by Guest and feature a departure from the traditional Guest potted construction while maintaining the bullet proof quality that has made Guest the leader in charging systems. The brains of the new Intelligent Choice Charger are evidenced in the control center which is located at the top of the charger. This membrane covered panel is positioned for easy view of all functions and easy access to the user selectable buttons. The control center features easy to read LED Indicators of charge status, user selectable
buttons to tailor the charge for specific battery types (AGM/Flooded or Gel) per output, and warning indicators to alert you before a serious problem. The heart of the electronics system is mounted on an anodized aluminum base to provide efficient heat dissipation and decreased weight. The circuits are coated in epoxy to protect the sensitive electronic components from water or vibration. The charger case is slotted on the sides to provide convection cooling of the anodized aluminum base plate while maintaining an IP65 Water Resistance standard. And, as part of an integrated battery charging/monitoring system, the new Intelligent Choice Battery Chargers will provide you with the most advanced and reliable system available today.

Product Features

Total Amps: 20
Number of Outputs: 2
Amps per output: 10/10 Amps
Battery System: 2 - 12 Volt, 24 Volt series
Output Voltage: 12 Volts DC
DC Output: 4’ cable with ring terminals
Input Voltage: 100 - 130 Volts AC/60 Hz
Input Connection: 6’ cable with Connect Charge plug

Description
Introducing the Guest Intelligent Choice Battery Charger System. These chargers are the most advanced devices developed by Guest and feature a departure from the traditional Guest potted construction while maintaining the bullet proof quality that has made Guest the leader in charging systems. The brains of the new Intelligent Choice Charger are evidenced in the control center which is located at the top of the charger. This membrane covered panel is positioned for easy view of all functions and easy access to the user selectable buttons. The control center features easy to read LED Indicators of charge status, user selectable
buttons to tailor the charge for specific battery types (AGM/Flooded or Gel) per output, and warning indicators to alert you before a serious problem. The heart of the electronics system is mounted on an anodized aluminum base to provide efficient heat dissipation and decreased weight. The circuits are coated in epoxy to protect the sensitive electronic components from water or vibration. The charger case is slotted on the sides to provide convection cooling of the anodized aluminum base plate while maintaining an IP65 Water Resistance standard. And, as part of an integrated battery charging/monitoring system, the new Intelligent Choice Battery Chargers will provide you with the most advanced and reliable system available today.

Product Features

Total Amps: 18
Number of Outputs: 3
Amps per output: 6/6/6 Amps
Battery System: 3 - 12 Volt, 12 Volt + 24 Volt, 36 Volt
Output Voltage: 12 Volts DC
DC Output: 4’ cables with ring terminals
Input Voltage: 100 - 130 Volts AC/60 Hz
Input Connection: 6’ cable with Connect Charge plug

Description
Introducing the Guest Intelligent Choice Battery Charger System. These chargers are the most advanced devices developed by Guest and feature a departure from the traditional Guest potted construction while maintaining the bullet proof quality that has made Guest the leader in charging systems. The brains of the new Intelligent Choice Charger are evidenced in the control center which is located at the top of the charger. This membrane covered panel is positioned for easy view of all functions and easy access to the user selectable buttons. The control center features easy to read LED Indicators of charge status, user selectable
buttons to tailor the charge for specific battery types (AGM/Flooded or Gel) per output, and warning indicators to alert you before a serious problem. The heart of the electronics system is mounted on an anodized aluminum base to provide efficient heat dissipation and decreased weight. The circuits are coated in epoxy to protect the sensitive electronic components from water or vibration. The charger case is slotted on the sides to provide convection cooling of the anodized aluminum base plate while maintaining an IP65 Water Resistance standard. And, as part of an integrated battery charging/monitoring system, the new Intelligent Choice Battery Chargers will provide you with the most advanced and reliable system available today.

Product Features

Total Amps: 12
Number of Outputs: 2
Amps per output: 6/6 Amps
Battery System: 2 - 12 Volt, 24 Volt series
Output Voltage: 12 Volts DC
DC Output: 4’ cable with ring terminals
Input Voltage: 100 - 130 Volts AC/60 Hz
Input Connection: 6’ cable with Connect Charge plug
 

Description
Introducing the Guest Intelligent Choice Battery Charger System. These chargers are the most advanced devices developed by Guest and feature a departure from the traditional Guest potted construction while maintaining the bullet proof quality that has made Guest the leader in charging systems. The brains of the new Intelligent Choice Charger are evidenced in the control center which is located at the top of the charger. This membrane covered panel is positioned for easy view of all functions and easy access to the user selectable buttons. The control center features easy to read LED Indicators of charge status, user selectable
buttons to tailor the charge for specific battery types (AGM/Flooded or Gel) per output, and warning indicators to alert you before a serious problem. The heart of the electronics system is mounted on an anodized aluminum base to provide efficient heat dissipation and decreased weight. The circuits are coated in epoxy to protect the sensitive electronic components from water or vibration. The charger case is slotted on the sides to provide convection cooling of the anodized aluminum base plate while maintaining an IP65 Water Resistance standard. And, as part of an integrated battery charging/monitoring system, the new Intelligent Choice Battery Chargers will provide you with the most advanced and reliable system available today.

Product Features

Total Amps: 6
Number of Outputs: 1
Amps per output: 6 Amps
Battery System: 1 - 12 Volt
Output Voltage: 12 Volts DC
DC Output: 4’ cable with ring terminals
Input Voltage: 100 - 130 Volts AC/60 Hz
Input Connection: 6’ cable with Connect Charge plug
 

Remote indicator for use with Models 36202-12 and 36202-24

• 15’ cable included
• Easy installation - plugs right into Charge Pro™ Plus chargers

• Dimensions: 8.0"W x 2.50"H x 0.50"D
• Mounting Holes: 4" center to center
• Mounting Hardware:1-3"gold plated bolt & nut, 1-3" bronze bolt & nut, 3 cooper washers
• Weight: 5 Lbs.
• For bonding, grounding and Loran use
• Improves performance of electronics and reduces RF interference
• Offers the best path for hull bonding without long runs of copper foil
• Equivalent to 20 square feet of copper foil
• Provides a direct, low resistance path for improved lighting protection
• Deters electrolysis and galvanic corrosion
• Sintered porous bronze sphere construction for maximum conductivity in a compact size
• Low drag, non fouling shape
• Easy to install
• Conforms to ABYC standards
• Easy to clean with wire brush
   

• Dimensions: 18.0"W x 6.0"H x 0.50 "D
• Mounting Holes: 9-7/8" center to center 3.0" top to bottom
• Mounting Hardware: 1-3"gold plated bolt & nut - 3-3" bronze bolts & nuts - 5-copper washers
• Weight: 13.0 Lbs.
• Use with SSB radio
• Improves performance of electronics and reduces RF interference
• Offers the best path for hull bonding without long runs of copper foil
• Equivalent to 100 square feet of copper foil
• Provides a direct, low resistance path for improved lighting protection
• Deters electrolysis and galvanic corrosion
• Sintered porous bronze sphere construction for maximum conductivity in a compact size
• Low drag, non fouling shape
• Easy to install
• Conforms to ABYC standards
• Easy to clean w/wire brush