Hubbell 15kVA 60 Hz Isolation Transformer, White

• UL listed, CSA certified and UL-3R enclosures meets or exceeds all listing criteria including NEMA, ANSI and OSHA standards
• Shielded for cleaner power
• Encapsulated and completely enclosed design electrical grade silica and resin compounds completely enclose the core and coil to seal out all moisture and air. UL Type 3R enclosure for indoor or outdoor service. Encapsulation eliminates corrosion and insulation deterioration
• Quiet operation with sound levels well below NEMA standards
• Long life UL class 155 degC insulation system. 115 degC rise thru .750 kVA; 180 degC insulation system, 115 degC rise, 1 kVA and above
• Exceeds ABYC’s 4000 Volt HIPOT test requirement
• Made for the Marine Industry by The Shore Power Experts
• 12.5% Taps
• Two Full Current-Carrying Shields
• Vibration-Resistant

Hubbell Watertight FD Box 3/4 in NPT

• Surface mount
• 3/4 in NPT
• Rated 3R,3R, 4X for wet and damp locations

• Gray FD Box
• Ground Screw
• Adapter plate
• 4 Screws

Hubbell Locking Devices, Twist-Lock(R), Accessories, Weatherproof Device Boot With Threaded Ring, For 20A and 30A 3 Wire Plugs and Connectors, Yellow

With Locking Ring

Hubbell Locking Devices, Twist-Lock(R), Marine Grade, Ship to Shore Cableset, 30A 125V, 2-Pole 3-Wire Grounding, L5-30, Yellow, LED Indicators

• Bright, durable, LED (green) indicates "power-on"
• High intensity LED is visible-even in bright sunlight
• Totally molded design for superior waterproofing and durability

Hubbell UFC0003CR Cord Connectors, Underground Feeder Connectors, .2x.6 in min

Hubbell USB Charger Duplex Receptacle, 15A 125V,2-Pole 3-Wire Grounding, 5-15R, 2) 5A USB Ports, White

• High Power 5 Amp, 5 Volt USB Output
• Two Type A USB Ports
• Tamper Resistant Commercial Grade Duplex Compatible
• USB Ports Rated 10,000 Cycles

Hubbell YQ100Plus Smart-Y

• Safely powers a 100A, 125/250V AC boat from two 50A, 125/250V AC receptacles at dockside - or - from a single 50A, 125/250V AC receptacle acting as a single adapter.
• Fully molded Hubbell Plugs
• 50A Plugs connect to 50A shore power
• Environmentally sealed against rain, humidity and fog
• Indicator lights indicate correct polarity and safe operation
• Smaller, lighter-weight enclosure
• A" leg for accessing a single 50A

Hubbell YQ230 Smat-Y

• Safely powers a 50Amp 125/250 AC boat from two 30 amp, 125V AC receptacles at dockside
• Environmentally sealed against humidity, rain and fog.
• UV registered and high impact housing
• Fully molded Hubbell connector and plugs
• Safety indicator light (when ON, safe operation is indicated)
• Cord clamps prevent strain on terminals

Hubbell Locking Devices, Twist-Lock(R), Marine Grade, Ship to Shore Cableset, 30A 125V, 2-Pole 3-Wire Grounding, L5-30, White, LED Indicators

• Bright, durable, LED (green) indicates "power-on"
• High intensity LED is visible-even in bright sunlight
• Totally molded design for superior waterproofing and durability

Hubbell Locking Devices, Twist-Lock(R), Marine Grade, Ship to Shore Cableset, 30A 125V, 2-Pole 3-Wire Grounding, L5-30, Yellow, LED Indicators

• Bright, durable, LED (green) indicates "power-on"
• High intensity LED is visible-even in bright sunlight
• Totally molded design for superior waterproofing and durability

Hubbell Locking Devices, Twist-Lock(R), Marine Grade, Ship to Shore Cableset, 30A 125V, 2-Pole 3-Wire Grounding, L5-30, White, LED Indicators

• Bright, durable, LED (green) indicates "power-on"
• High intensity LED is visible-even in bright sunlight
• Totally molded design for superior waterproofing and durability

Hubbell Adapter, Marine, Molded, Straight Blade, 30A 125V Locking Female L5-30R to 15A 125V 5-15P Straight Blade Male, Yellow

25 feet (15.2m) white vinyl jacketed shore power cable set, #6 AWG type STOW is completely factory pre-wired with molded-on devices. The connector end has a metallic threaded sealing ring for making the inlet/connector interface watertight. IP56 SUITABILITY (BOATSIDE).

Hubbell Locking Devices, Twist-Lock(R), Marine Grade, Ship to Shore Cableset, 50A 125/250V, 3-Pole 4-Wire Grounding, Non-NEMA, White, LED Indicators

• Bull ring for added strain relief
• Bright green LED indicates "Power-On"
• Exclusive crimp termination for longer life
• Bright red LED indicates "Incorrect Wiring"
• Totally molded design for superior waterproofing and durability

Locking Devices, Twist-Lock(R), Marine Grade, Ship to Shore Cableset, 50A 125/250V, 3-Pole 4-Wire Grounding, Non-NEMA, White, LED Indicators

LED Indicator

Two bright, durable, LEDs. GREEN indicates "power-on" and RED indicates "incorrect wiring" at the power source.

• High Intensity LEDs are visible - even in bright sunlight.
• Totally molded design for superior waterproofing and durability.
• Exclusive copper crimp barrel terminations for tighter connections and longer life..

Vinyl jacketed shore power cable set. #6 AWG type STOW is completely
factory pre-wired with molded-on devices.

50 feet (15.2m) white vinyl jacketed shore power cable set, #6 AWG type STOW is completely factory pre-wired with molded-on devices. The connector end has a metallic threaded sealing ring for making the inlet/connector interface watertight. IP56 SUITABILITY (BOATSIDE).

Hubbell 61CM52WLED 50 feet 50Amp 125/25VAC Shorecord with LED Indicators, White

• Bull ring for added strain relief
• Bright green LED indicates "Power-On"
• Exclusive crimp termination for longer life
• Bright red LED indicates "Incorrect Wiring"
• Totally molded design for superior waterproofing and durability

Hubbell Adapter, Marine, Molded, Straight Blade, 30A 125V Locking Female L5-30R to 50A 125V Locking Male, Yellow

Hubbell HBL61CM64 Straight Blade Devices, Male Inlets, Weatherproofed, Marine, 15A 125V, 2-Pole 3-Wire Grounding, 5-15P, Gray

• Weatherproof flip lid
• Weatherproof boot covers terminals
• Multiple drive screws
• Nickel plated brass blades

Straight Blade Devices, Male Inlets, Weatherproofed, Marine, 15A 125V, 2-Pole 3-Wire Grounding, 5-15P, Gray, Single Pack.

Hubbell Straight Blade Devices, Outlet, Flanged, Marine, 20A 125V, 2-Pole 3-Wire Grounding, 5-20R, Gray

• Weatherproof flip lid
• Weatherproof boot covers terminals
• Multiple drive screws
• Nickel plated brass contacts

Straight Blade Devices, Outlet, Flanged, Marine, 20A 125V, 2-Pole 3-Wire Grounding, 5-20R, Gray, Single Pack.

Hubbell Adapter, Marine, Molded, Straight Blade, Yellow, 30A 125V, 2-Pole 3-Wire Grounding Female to 50A 125/250V, 3-Pole 4-Wire Grounding Locking Male, Yellow

Adapter, Marine, Molded, Straight Blade, Yellow, 30A 125V, 2-Pole 3-Wire Grounding Female to 50A 125/250V, 3-Pole 4-Wire Grounding Locking Male, Yellow

Corrosion Resistant

Hubbell Adapter, Marine, Molded, Straight Blade, Yellow, 30A 125V 2-Pole 3-Wire Grounding Female to 50A 125V, 2-Pole 3- Wire Grounding Locking Male, Yellow

Hubbell Adapter, Marine, Molded Straight, Yellow

Hubbell Locking Devices, Twist-Lock(R), Marine Grade, Female Connector Body, 125V, 2-Pole 3-Wire Grounding, Non-NEMA, Screw Terminal, Galvanized

Hubbel Locking Devices, Twist-Lock(R), Marine Grade, Male Plug, 50A 125V, 2-Pole 3-Wire Grounding, Non-NEMA, Screw Terminal, Galvanized

• Nickel plated brass shell for positive alignment
• Copper crimp barrels for reliable terminations
• Nickel plated brass contacts for corrossion resistance

Hubbell Locking Devices, Twist-Lock(R), Marine Grade, Female Connector Body, 50A 125/250V, 3-Pole 4-Wire Grounding, Non-NEMA, Screw Terminal, Galvanized

Hubbell Locking Devices, Twist-Lock(R), Marine Grade, Male Plug, 50A 125/250V, 3-Pole 4-Wire Grounding, Non-NEMA, Screw Terminal, Galvanized

• Nickel plated brass shell for positive alignment
• Copper crimp barrels for reliable terminations
• Nickel plated brass contacts for corrossion resistance

Hubell Locking Devices, Twist-Lock(R), Marine Grade, Receptacle, 50A 125/250V, 3-Pole 4-Wire Grounding, Non-NEMA, Screw Terminal, Galvanized

Hubbell Locking Devices, Twist-Lock(R), Marine Grade, Receptacle, 50A 125V, 2-Pole 3-Wire Grounding, Non-NEMA, Screw Terminal, Galvanized

Hubbell Adapter, Marine Adapter, Molded Y"

Hubbell Adapter, Marine Adapter, Molded Y"

Hubbell Adapter, Marine Adapter, Molded Y"

Hubbell Adapter, Marine Adapter, Molded Y"

Hubbell Wallplates and Boxes, Weatherproof Covers, 1-Gang, 1) 1.60 Opening

Hubbell Locking Devices, Twist-Lock(R), Accessories, Device Boot, 50A, Yellow

Locking Devices, Twist-Lock(R), Accessories, Device Boot, 50A, Yellow

With Locking Ring

Hubbell Locking Devices, Twist-Lock(R), Accessories, Device Boot, 50A, White

Locking Devices, Twist-Lock(R), Accessories, Device Boot, 50A, White

With Locking Ring

Hubbell HBL77CM16 Twist-Lock(R), Device Boot, 50A, Yellow

Locking Devices, Twist-Lock(R), Accessories, Device Boot, 50A, Yellow

Hubbell HBL77CM16W Twist-Lock(R), Device Boot, 50A, White

Hubbell Wallplates and Boxes, Weatherproof Covers, 1-Gang, 1) 50A Twist-Lock(R) Opening, Standard Size, Yellow Polycarbonate

• Corrosion resistant, yellow thermoplastic Weatherproof in Open Position with Device Mated

Hubbell Marine Wiring Products, Phone/TV Device, Marine Hull Inlet, Phone and TV, Non-Metallic

Marine Wiring Products, Phone/TV Device, Marine Hull Inlet, Phone and TV, Non-Metallic

Hubbell Marine Wiring Products, Phone/TV Device, Marine Hull Inlet, Phone and TV, Stainless

Marine Wiring Products, Phone/TV Device, Marine Hull Inlet, Phone and TV, Stainless

Hubbell Marine was the first to offer 100 amp marine grade devices that are considered second to none.

Hubbell developed the standard for 100 amp Pin and Sleeve devices with the National Electric Code and the American Boat and Yacht Council.

Only Hubbell offers 3, 4 and 5 wire 100 amp cable sets for your shore power requirements.

Cable sets manufactured in factory controlled conditions using specially compounded cable to accommodate a full 100 amp.

100 Amp pin and Rugged, watertight, sleeve devices. UL listed, AB02029 YC compliant, corrosion resistant.

M4100B12R
Gray nylon shore power inlet has gasketed, spring-loaded cover which closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers and rear portion has 3.94 in. (100.0) diameter. Mounting screws and gasket included.

M4100C12R
Yellow Zytel(R) super tough nylon watertight connector body has gasketed locking ring to make inlet/connector interface watertight. Note: This device mates with shore power inlet only.

M4100P12
Yellow Zytel(R) super tough nylon watertight plug has gasketed locking ring to make plug/receptacle interface watertight.

M4100R12
Gray nylon dockside receptacle has gasketed, spring-loaded cover. Closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers. Mounting screws and gasket included.

M4100C12
Yellow Zytel(R) super tough nylon watertight connector body for mating plug to connector interface on extension cords or adapters. Note: It cannot be mated to the shore power inlet.

100 Ampere, 3ØY 120/208 Volt and 3ØY 277/480 Volt 4 Pole 5 Wire Ship-to-Shore Devices

M5100B9R
Gray nylon shore power inlet has gasketed, spring-loaded cover which closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers and rear portion has 3.94 in. (100.0) diameter. Mounting screws and gasket included.

M5100C9R
Yellow Zytel(R) super tough nylon watertight connector body has gasketed locking ring to make inlet/connector interface watertight. Note: This device mates with shore power inlet only.

BB1001W
15 deg angle cast aluminum back box has corrosion resistant gray finish and top hub with 11?2 in. N.P.T. 100A receptacles can be mounted directly to it.

BB100N
15 deg angle non-metallic back box, made of high-grade engineered thermoplastic Valox(R) to resist chemicals, abuse and U.V. rays. Has integral grounding plate, 11?2 in. N.P.T. hub size and 120 cu. in. capacity (hub is not included - Raco part number 1706 is recommended).

M5100P9
Yellow Zytel(R) super tough nylon watertight plug has gasketed locking ring to make plug/receptacle interface watertight.

M5100R9
Gray nylon dockside receptacle has gasketed, spring-loaded cover. Closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers. Mounting screws and gasket included.

M5100C9
Yellow Zytel(R) super tough nylon watertight connector body for making plug to connector interface on extension cords or adapters. Note: It cannot be mated to the shore power inlet.

Hubbell Marine was the first to offer 100 amp marine grade devices that are considered second to none.

Hubbell developed the standard for 100 amp Pin and Sleeve devices with the National Electric Code and the American Boat and Yacht Council.

Only Hubbell offers 3, 4 and 5 wire 100 amp cable sets for your shore power requirements.

Cable sets manufactured in factory controlled conditions using specially compounded cable to accommodate a full 100 amp.

100 Amp pin and Rugged, watertight, sleeve devices. UL listed, AB02029 YC compliant, corrosion resistant.

M4100B12R
Gray nylon shore power inlet has gasketed, spring-loaded cover which closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers and rear portion has 3.94 in. (100.0) diameter. Mounting screws and gasket included.

M4100C12R
Yellow Zytel(R) super tough nylon watertight connector body has gasketed locking ring to make inlet/connector interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3). Note: This device mates with shore power inlet only.

M4100P12
Yellow Zytel(R) super tough nylon watertight plug has gasketed locking ring to make plug/receptacle interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3).

M4100R12
Gray nylon dockside receptacle has gasketed, spring-loaded cover. Closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers. Mounting screws and gasket included.

M4100C12
Yellow Zytel(R) super tough nylon watertight connector body for mating plug to connector interface on extension cords or adapters. Cord grip range
is 1.00?1.94 in. (25.4?49.3). Note: It cannot be mated to the shore power inlet.

100 Ampere, 3ØY 120/208 Volt and 3ØY 277/480 Volt 4 Pole 5 Wire Ship-to-Shore Devices

M5100B9R
Gray nylon shore power inlet has gasketed, spring-loaded cover which closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers and rear portion has 3.94 in. (100.0) diameter. Mounting screws and gasket included.

M5100C9R
Yellow Zytel(R) super tough nylon watertight connector body has gasketed locking ring to make inlet/connector interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3). Note: This device mates with shore power inlet only.

BB1001W
15 deg angle cast aluminum back box has corrosion resistant gray finish and top hub with 11?2 in. N.P.T. 100A receptacles can be mounted directly to it.

BB100N
15 deg angle non-metallic back box, made of high-grade engineered thermoplastic Valox(R) to resist chemicals, abuse and U.V. rays. Has integral grounding plate, 11?2 in. N.P.T. hub size and 120 cu. in. capacity (hub is not included - Raco part number 1706 is recommended).

M5100P9
Yellow Zytel(R) super tough nylon watertight plug has gasketed locking ring to make plug/receptacle interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3).

M5100R9
Gray nylon dockside receptacle has gasketed, spring-loaded cover. Closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers. Mounting screws and gasket included.

M5100C9
Yellow Zytel(R) super tough nylon watertight connector body for making plug to connector interface on extension cords or adapters. Cord grip range is 1.00?1.94 in. (25.4?49.3). Note: It cannot be mated to the shore power inlet.

Hubbell Marine was the first to offer 100 amp marine grade devices that are considered second to none.

Hubbell developed the standard for 100 amp Pin and Sleeve devices with the National Electric Code and the American Boat and Yacht Council.

Only Hubbell offers 3, 4 and 5 wire 100 amp cable sets for your shore power requirements.

Cable sets manufactured in factory controlled conditions using specially compounded cable to accommodate a full 100 amp.

100 Amp pin and Rugged, watertight, sleeve devices. UL listed, AB02029 YC compliant, corrosion resistant.

M4100B12R
Gray nylon shore power inlet has gasketed, spring-loaded cover which closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers and rear portion has 3.94 in. (100.0) diameter. Mounting screws and gasket included.

M4100C12R
Yellow Zytel(R) super tough nylon watertight connector body has gasketed locking ring to make inlet/connector interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3). Note: This device mates with shore power inlet only.

M4100P12
Yellow Zytel(R) super tough nylon watertight plug has gasketed locking ring to make plug/receptacle interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3).

M4100R12
Gray nylon dockside receptacle has gasketed, spring-loaded cover. Closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers. Mounting screws and gasket included.

M4100C12
Yellow Zytel(R) super tough nylon watertight connector body for mating plug to connector interface on extension cords or adapters. Cord grip range
is 1.00?1.94 in. (25.4?49.3). Note: It cannot be mated to the shore power inlet.

100 Ampere, 3ØY 120/208 Volt and 3ØY 277/480 Volt 4 Pole 5 Wire Ship-to-Shore Devices

M5100B9R
Gray nylon shore power inlet has gasketed, spring-loaded cover which closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers and rear portion has 3.94 in. (100.0) diameter. Mounting screws and gasket included.

M5100C9R
Yellow Zytel(R) super tough nylon watertight connector body has gasketed locking ring to make inlet/connector interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3). Note: This device mates with shore power inlet only.

BB1001W
15 deg angle cast aluminum back box has corrosion resistant gray finish and top hub with 11?2 in. N.P.T. 100A receptacles can be mounted directly to it.

BB100N
15 deg angle non-metallic back box, made of high-grade engineered thermoplastic Valox(R) to resist chemicals, abuse and U.V. rays. Has integral grounding plate, 11?2 in. N.P.T. hub size and 120 cu. in. capacity (hub is not included - Raco part number 1706 is recommended).

M5100P9
Yellow Zytel(R) super tough nylon watertight plug has gasketed locking ring to make plug/receptacle interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3).

M5100R9
Gray nylon dockside receptacle has gasketed, spring-loaded cover. Closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers. Mounting screws and gasket included.

M5100C9
Yellow Zytel(R) super tough nylon watertight connector body for making plug to connector interface on extension cords or adapters. Cord grip range is 1.00?1.94 in. (25.4?49.3). Note: It cannot be mated to the shore power inlet.

Hubbell Marine was the first to offer 100 amp marine grade devices that are considered second to none.

Hubbell developed the standard for 100 amp Pin and Sleeve devices with the National Electric Code and the American Boat and Yacht Council.

Only Hubbell offers 3, 4 and 5 wire 100 amp cable sets for your shore power requirements.

Cable sets manufactured in factory controlled conditions using specially compounded cable to accommodate a full 100 amp.

100 Amp pin and Rugged, watertight, sleeve devices. UL listed, AB02029 YC compliant, corrosion resistant.

M4100B12R
Gray nylon shore power inlet has gasketed, spring-loaded cover which closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers and rear portion has 3.94 in. (100.0) diameter. Mounting screws and gasket included.

M4100C12R
Yellow Zytel(R) super tough nylon watertight connector body has gasketed locking ring to make inlet/connector interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3). Note: This device mates with shore power inlet only.

M4100P12
Yellow Zytel(R) super tough nylon watertight plug has gasketed locking ring to make plug/receptacle interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3).

M4100R12
Gray nylon dockside receptacle has gasketed, spring-loaded cover. Closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers. Mounting screws and gasket included.

M4100C12
Yellow Zytel(R) super tough nylon watertight connector body for mating plug to connector interface on extension cords or adapters. Cord grip range
is 1.00?1.94 in. (25.4?49.3). Note: It cannot be mated to the shore power inlet.

100 Ampere, 3ØY 120/208 Volt and 3ØY 277/480 Volt 4 Pole 5 Wire Ship-to-Shore Devices

M5100B9R
Gray nylon shore power inlet has gasketed, spring-loaded cover which closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers and rear portion has 3.94 in. (100.0) diameter. Mounting screws and gasket included.

M5100C9R
Yellow Zytel(R) super tough nylon watertight connector body has gasketed locking ring to make inlet/connector interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3). Note: This device mates with shore power inlet only.

BB1001W
15 deg angle cast aluminum back box has corrosion resistant gray finish and top hub with 11?2 in. N.P.T. 100A receptacles can be mounted directly to it.

BB100N
15 deg angle non-metallic back box, made of high-grade engineered thermoplastic Valox(R) to resist chemicals, abuse and U.V. rays. Has integral grounding plate, 11?2 in. N.P.T. hub size and 120 cu. in. capacity (hub is not included - Raco part number 1706 is recommended).

M5100P9
Yellow Zytel(R) super tough nylon watertight plug has gasketed locking ring to make plug/receptacle interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3).

M5100R9
Gray nylon dockside receptacle has gasketed, spring-loaded cover. Closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers. Mounting screws and gasket included.

M5100C9
Yellow Zytel(R) super tough nylon watertight connector body for making plug to connector interface on extension cords or adapters. Cord grip range is 1.00?1.94 in. (25.4?49.3). Note: It cannot be mated to the shore power inlet.

Hubbell Marine was the first to offer 100 amp marine grade devices that are considered second to none.

Hubbell developed the standard for 100 amp Pin and Sleeve devices with the National Electric Code and the American Boat and Yacht Council.

Only Hubbell offers 3, 4 and 5 wire 100 amp cable sets for your shore power requirements.

Cable sets manufactured in factory controlled conditions using specially compounded cable to accommodate a full 100 amp.

100 Amp pin and Rugged, watertight, sleeve devices. UL listed, AB02029 YC compliant, corrosion resistant.

M4100B12R
Gray nylon shore power inlet has gasketed, spring-loaded cover which closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers and rear portion has 3.94 in. (100.0) diameter. Mounting screws and gasket included.

M4100C12R
Yellow Zytel(R) super tough nylon watertight connector body has gasketed locking ring to make inlet/connector interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3). Note: This device mates with shore power inlet only.

M4100P12
Yellow Zytel(R) super tough nylon watertight plug has gasketed locking ring to make plug/receptacle interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3).

M4100R12
Gray nylon dockside receptacle has gasketed, spring-loaded cover. Closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers. Mounting screws and gasket included.

M4100C12
Yellow Zytel(R) super tough nylon watertight connector body for mating plug to connector interface on extension cords or adapters. Cord grip range
is 1.00?1.94 in. (25.4?49.3). Note: It cannot be mated to the shore power inlet.

100 Ampere, 3ØY 120/208 Volt and 3ØY 277/480 Volt 4 Pole 5 Wire Ship-to-Shore Devices

M5100B9R
Gray nylon shore power inlet has gasketed, spring-loaded cover which closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers and rear portion has 3.94 in. (100.0) diameter. Mounting screws and gasket included.

M5100C9R
Yellow Zytel(R) super tough nylon watertight connector body has gasketed locking ring to make inlet/connector interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3). Note: This device mates with shore power inlet only.

BB1001W
15 deg angle cast aluminum back box has corrosion resistant gray finish and top hub with 11?2 in. N.P.T. 100A receptacles can be mounted directly to it.

BB100N
15 deg angle non-metallic back box, made of high-grade engineered thermoplastic Valox(R) to resist chemicals, abuse and U.V. rays. Has integral grounding plate, 11?2 in. N.P.T. hub size and 120 cu. in. capacity (hub is not included - Raco part number 1706 is recommended).

M5100P9
Yellow Zytel(R) super tough nylon watertight plug has gasketed locking ring to make plug/receptacle interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3).

M5100R9
Gray nylon dockside receptacle has gasketed, spring-loaded cover. Closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers. Mounting screws and gasket included.

M5100C9
Yellow Zytel(R) super tough nylon watertight connector body for making plug to connector interface on extension cords or adapters. Cord grip range is 1.00?1.94 in. (25.4?49.3). Note: It cannot be mated to the shore power inlet.

Hubbell M5100B7R 5 Wire 100 Amp 480 Volt Shore Power Inlet

• Solid one-piece pins for reliable electrical contact
• Gasketed sealing ring provides watertight seal
• Raised collar surrounds each phase pin

Heavy Duty Products, IEC Pin and Sleeve Devices, Marine Grade, Male, Flanged Inlet, 100A 3-Phase Wye 277/480V AC, 4-Pole 5-Wire Grounding, Terminal Screws, Yellow

Hubbell Marine was the first to offer 100 amp marine grade devices that are considered second to none.

Hubbell developed the standard for 100 amp Pin and Sleeve devices with the National Electric Code and the American Boat and Yacht Council.

Only Hubbell offers 3, 4 and 5 wire 100 amp cable sets for your shore power requirements.

Cable sets manufactured in factory controlled conditions using specially compounded cable to accommodate a full 100 amp.

100 Amp pin and Rugged, watertight, sleeve devices. UL listed, AB02029 YC compliant, corrosion resistant.

M4100B12R
Gray nylon shore power inlet has gasketed, spring-loaded cover which closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers and rear portion has 3.94 in. (100.0) diameter. Mounting screws and gasket included.

M4100C12R
Yellow Zytel(R) super tough nylon watertight connector body has gasketed locking ring to make inlet/connector interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3). Note: This device mates with shore power inlet only.

M4100P12
Yellow Zytel(R) super tough nylon watertight plug has gasketed locking ring to make plug/receptacle interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3).

M4100R12
Gray nylon dockside receptacle has gasketed, spring-loaded cover. Closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers. Mounting screws and gasket included.

M4100C12
Yellow Zytel(R) super tough nylon watertight connector body for mating plug to connector interface on extension cords or adapters. Cord grip range
is 1.00?1.94 in. (25.4?49.3). Note: It cannot be mated to the shore power inlet.

100 Ampere, 3ØY 120/208 Volt and 3ØY 277/480 Volt 4 Pole 5 Wire Ship-to-Shore Devices

M5100B9R
Gray nylon shore power inlet has gasketed, spring-loaded cover which closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers and rear portion has 3.94 in. (100.0) diameter. Mounting screws and gasket included.

M5100C9R
Yellow Zytel(R) super tough nylon watertight connector body has gasketed locking ring to make inlet/connector interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3). Note: This device mates with shore power inlet only.

BB1001W
15 deg angle cast aluminum back box has corrosion resistant gray finish and top hub with 11?2 in. N.P.T. 100A receptacles can be mounted directly to it.

BB100N
15 deg angle non-metallic back box, made of high-grade engineered thermoplastic Valox(R) to resist chemicals, abuse and U.V. rays. Has integral grounding plate, 11?2 in. N.P.T. hub size and 120 cu. in. capacity (hub is not included - Raco part number 1706 is recommended).

M5100P9
Yellow Zytel(R) super tough nylon watertight plug has gasketed locking ring to make plug/receptacle interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3).

M5100R9
Gray nylon dockside receptacle has gasketed, spring-loaded cover. Closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers. Mounting screws and gasket included.

M5100C9
Yellow Zytel(R) super tough nylon watertight connector body for making plug to connector interface on extension cords or adapters. Cord grip range is 1.00?1.94 in. (25.4?49.3). Note: It cannot be mated to the shore power inlet.

Hubbell M5100C 5-Wire 100 Amp 480 Volt Female Connector Body

• Insulated non-metallic housing
• Self-closing gasketed cover
• Color coded housings for easy identification

Heavy Duty Products, IEC Pin and Sleeve Devices, Marine Grade, Female, Connector Body, 100A 3-Phase Wye 277/480V AC, 4-Pole 5-Wire Grounding, Terminal Screws, Yellow

Hubbell Marine was the first to offer 100 amp marine grade devices that are considered second to none.

Hubbell developed the standard for 100 amp Pin and Sleeve devices with the National Electric Code and the American Boat and Yacht Council.

Only Hubbell offers 3, 4 and 5 wire 100 amp cable sets for your shore power requirements.

Cable sets manufactured in factory controlled conditions using specially compounded cable to accommodate a full 100 amp.

100 Amp pin and Rugged, watertight, sleeve devices. UL listed, AB02029 YC compliant, corrosion resistant.

M4100B12R
Gray nylon shore power inlet has gasketed, spring-loaded cover which closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers and rear portion has 3.94 in. (100.0) diameter. Mounting screws and gasket included.

M4100C12R
Yellow Zytel(R) super tough nylon watertight connector body has gasketed locking ring to make inlet/connector interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3). Note: This device mates with shore power inlet only.

M4100P12
Yellow Zytel(R) super tough nylon watertight plug has gasketed locking ring to make plug/receptacle interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3).

M4100R12
Gray nylon dockside receptacle has gasketed, spring-loaded cover. Closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers. Mounting screws and gasket included.

M4100C12
Yellow Zytel(R) super tough nylon watertight connector body for mating plug to connector interface on extension cords or adapters. Cord grip range
is 1.00?1.94 in. (25.4?49.3). Note: It cannot be mated to the shore power inlet.

100 Ampere, 3ØY 120/208 Volt and 3ØY 277/480 Volt 4 Pole 5 Wire Ship-to-Shore Devices

M5100B9R
Gray nylon shore power inlet has gasketed, spring-loaded cover which closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers and rear portion has 3.94 in. (100.0) diameter. Mounting screws and gasket included.

M5100C9R
Yellow Zytel(R) super tough nylon watertight connector body has gasketed locking ring to make inlet/connector interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3). Note: This device mates with shore power inlet only.

BB1001W
15 deg angle cast aluminum back box has corrosion resistant gray finish and top hub with 11?2 in. N.P.T. 100A receptacles can be mounted directly to it.

BB100N
15 deg angle non-metallic back box, made of high-grade engineered thermoplastic Valox(R) to resist chemicals, abuse and U.V. rays. Has integral grounding plate, 11?2 in. N.P.T. hub size and 120 cu. in. capacity (hub is not included - Raco part number 1706 is recommended).

M5100P9
Yellow Zytel(R) super tough nylon watertight plug has gasketed locking ring to make plug/receptacle interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3).

M5100R9
Gray nylon dockside receptacle has gasketed, spring-loaded cover. Closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers. Mounting screws and gasket included.

M5100C9
Yellow Zytel(R) super tough nylon watertight connector body for making plug to connector interface on extension cords or adapters. Cord grip range is 1.00?1.94 in. (25.4?49.3). Note: It cannot be mated to the shore power inlet.

Hubbell Marine was the first to offer 100 amp marine grade devices that are considered second to none.

Hubbell developed the standard for 100 amp Pin and Sleeve devices with the National Electric Code and the American Boat and Yacht Council.

Only Hubbell offers 3, 4 and 5 wire 100 amp cable sets for your shore power requirements.

Cable sets manufactured in factory controlled conditions using specially compounded cable to accommodate a full 100 amp.

100 Amp pin and Rugged, watertight, sleeve devices. UL listed, AB02029 YC compliant, corrosion resistant.

M4100B12R
Gray nylon shore power inlet has gasketed, spring-loaded cover which closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers and rear portion has 3.94 in. (100.0) diameter. Mounting screws and gasket included.

M4100C12R
Yellow Zytel(R) super tough nylon watertight connector body has gasketed locking ring to make inlet/connector interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3). Note: This device mates with shore power inlet only.

M4100P12
Yellow Zytel(R) super tough nylon watertight plug has gasketed locking ring to make plug/receptacle interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3).

M4100R12
Gray nylon dockside receptacle has gasketed, spring-loaded cover. Closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers. Mounting screws and gasket included.

M4100C12
Yellow Zytel(R) super tough nylon watertight connector body for mating plug to connector interface on extension cords or adapters. Cord grip range
is 1.00?1.94 in. (25.4?49.3). Note: It cannot be mated to the shore power inlet.

100 Ampere, 3ØY 120/208 Volt and 3ØY 277/480 Volt 4 Pole 5 Wire Ship-to-Shore Devices

M5100B9R
Gray nylon shore power inlet has gasketed, spring-loaded cover which closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers and rear portion has 3.94 in. (100.0) diameter. Mounting screws and gasket included.

M5100C9R
Yellow Zytel(R) super tough nylon watertight connector body has gasketed locking ring to make inlet/connector interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3). Note: This device mates with shore power inlet only.

BB1001W
15 deg angle cast aluminum back box has corrosion resistant gray finish and top hub with 11?2 in. N.P.T. 100A receptacles can be mounted directly to it.

BB100N
15 deg angle non-metallic back box, made of high-grade engineered thermoplastic Valox(R) to resist chemicals, abuse and U.V. rays. Has integral grounding plate, 11?2 in. N.P.T. hub size and 120 cu. in. capacity (hub is not included - Raco part number 1706 is recommended).

M5100P9
Yellow Zytel(R) super tough nylon watertight plug has gasketed locking ring to make plug/receptacle interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3).

M5100R9
Gray nylon dockside receptacle has gasketed, spring-loaded cover. Closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers. Mounting screws and gasket included.

M5100C9
Yellow Zytel(R) super tough nylon watertight connector body for making plug to connector interface on extension cords or adapters. Cord grip range is 1.00?1.94 in. (25.4?49.3). Note: It cannot be mated to the shore power inlet.

Hubbell M5100P7 5-Wire 100 Amp 480 Volt Male Plug

• Solid one-piece pins for reliable electrical contact
• Gasketed sealing ring provides watertight seal
• Raised collar surrounds each phase pin

Heavy Duty Products, IEC Pin and Sleeve Devices, Marine Grade, Male, Plug, 100A 3-Phase Wye 277/480V AC, 4-Pole 5-Wire Grounding, Terminal Screws, Yellow

Hubbell Marine was the first to offer 100 amp marine grade devices that are considered second to none.

Hubbell developed the standard for 100 amp Pin and Sleeve devices with the National Electric Code and the American Boat and Yacht Council.

Only Hubbell offers 3, 4 and 5 wire 100 amp cable sets for your shore power requirements.

Cable sets manufactured in factory controlled conditions using specially compounded cable to accommodate a full 100 amp.

100 Amp pin and Rugged, watertight, sleeve devices. UL listed, AB02029 YC compliant, corrosion resistant.

M4100B12R
Gray nylon shore power inlet has gasketed, spring-loaded cover which closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers and rear portion has 3.94 in. (100.0) diameter. Mounting screws and gasket included.

M4100C12R
Yellow Zytel(R) super tough nylon watertight connector body has gasketed locking ring to make inlet/connector interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3). Note: This device mates with shore power inlet only.

M4100P12
Yellow Zytel(R) super tough nylon watertight plug has gasketed locking ring to make plug/receptacle interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3).

M4100R12
Gray nylon dockside receptacle has gasketed, spring-loaded cover. Closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers. Mounting screws and gasket included.

M4100C12
Yellow Zytel(R) super tough nylon watertight connector body for mating plug to connector interface on extension cords or adapters. Cord grip range
is 1.00?1.94 in. (25.4?49.3). Note: It cannot be mated to the shore power inlet.

100 Ampere, 3ØY 120/208 Volt and 3ØY 277/480 Volt 4 Pole 5 Wire Ship-to-Shore Devices

M5100B9R
Gray nylon shore power inlet has gasketed, spring-loaded cover which closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers and rear portion has 3.94 in. (100.0) diameter. Mounting screws and gasket included.

M5100C9R
Yellow Zytel(R) super tough nylon watertight connector body has gasketed locking ring to make inlet/connector interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3). Note: This device mates with shore power inlet only.

BB1001W
15 deg angle cast aluminum back box has corrosion resistant gray finish and top hub with 11?2 in. N.P.T. 100A receptacles can be mounted directly to it.

BB100N
15 deg angle non-metallic back box, made of high-grade engineered thermoplastic Valox(R) to resist chemicals, abuse and U.V. rays. Has integral grounding plate, 11?2 in. N.P.T. hub size and 120 cu. in. capacity (hub is not included - Raco part number 1706 is recommended).

M5100P9
Yellow Zytel(R) super tough nylon watertight plug has gasketed locking ring to make plug/receptacle interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3).

M5100R9
Gray nylon dockside receptacle has gasketed, spring-loaded cover. Closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers. Mounting screws and gasket included.

M5100C9
Yellow Zytel(R) super tough nylon watertight connector body for making plug to connector interface on extension cords or adapters. Cord grip range is 1.00?1.94 in. (25.4?49.3). Note: It cannot be mated to the shore power inlet.

Hubbell M5100R7 5-Wire 100 Amp 480 Volt Receptacle

• Insulated non-metallic housing
• Self-closing gasketed cover
• Color coded housings for easy identification

Heavy Duty Products, IEC Pin and Sleeve Devices, Marine Grade, Female, Receptacle, 100A 3-Phase Wye 277/480V AC, 4-Pole 5-Wire Grounding, Terminal Screws, Yellow

Hubbell Marine was the first to offer 100 amp marine grade devices that are considered second to none.

Hubbell developed the standard for 100 amp Pin and Sleeve devices with the National Electric Code and the American Boat and Yacht Council.

Only Hubbell offers 3, 4 and 5 wire 100 amp cable sets for your shore power requirements.

Cable sets manufactured in factory controlled conditions using specially compounded cable to accommodate a full 100 amp.

100 Amp pin and Rugged, watertight, sleeve devices. UL listed, AB02029 YC compliant, corrosion resistant.

M4100B12R
Gray nylon shore power inlet has gasketed, spring-loaded cover which closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers and rear portion has 3.94 in. (100.0) diameter. Mounting screws and gasket included.

M4100C12R
Yellow Zytel(R) super tough nylon watertight connector body has gasketed locking ring to make inlet/connector interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3). Note: This device mates with shore power inlet only.

M4100P12
Yellow Zytel(R) super tough nylon watertight plug has gasketed locking ring to make plug/receptacle interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3).

M4100R12
Gray nylon dockside receptacle has gasketed, spring-loaded cover. Closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers. Mounting screws and gasket included.

M4100C12
Yellow Zytel(R) super tough nylon watertight connector body for mating plug to connector interface on extension cords or adapters. Cord grip range
is 1.00?1.94 in. (25.4?49.3). Note: It cannot be mated to the shore power inlet.

100 Ampere, 3ØY 120/208 Volt and 3ØY 277/480 Volt 4 Pole 5 Wire Ship-to-Shore Devices

M5100B9R
Gray nylon shore power inlet has gasketed, spring-loaded cover which closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers and rear portion has 3.94 in. (100.0) diameter. Mounting screws and gasket included.

M5100C9R
Yellow Zytel(R) super tough nylon watertight connector body has gasketed locking ring to make inlet/connector interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3). Note: This device mates with shore power inlet only.

BB1001W
15 deg angle cast aluminum back box has corrosion resistant gray finish and top hub with 11?2 in. N.P.T. 100A receptacles can be mounted directly to it.

BB100N
15 deg angle non-metallic back box, made of high-grade engineered thermoplastic Valox(R) to resist chemicals, abuse and U.V. rays. Has integral grounding plate, 11?2 in. N.P.T. hub size and 120 cu. in. capacity (hub is not included - Raco part number 1706 is recommended).

M5100P9
Yellow Zytel(R) super tough nylon watertight plug has gasketed locking ring to make plug/receptacle interface watertight. Cord grip range is 1.00?1.94 in. (25.4?49.3).

M5100R9
Gray nylon dockside receptacle has gasketed, spring-loaded cover. Closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers. Mounting screws and gasket included.

M5100C9
Yellow Zytel(R) super tough nylon watertight connector body for making plug to connector interface on extension cords or adapters. Cord grip range is 1.00?1.94 in. (25.4?49.3). Note: It cannot be mated to the shore power inlet.

Hubbell was the first to offer a marine-ized UL listed 100 AMP Ship-To-Shore system and now, they are the first to offer a marine-ized, UL listed 200 AMP ship-to-shore system.

Hubbell’s 200 AMP Ship-To-Shore System is:

• NEMA 4X rated for superior water resistance.
• Made of copper-free aluminum with an electrostatically applied epoxy/polyester finish.
• Accepts a cord range of #1 AWG ? 250 MCM.
• Pin and sleeves are made of nickel-plated Tellurium copper for superior corrosion and heat resistance.

And fully interchangeable with UL 1686 configured and listed devices such as Crouse-Hinds(R) Arktite(R) or Appleton(R) Powertite(R) (when installed in
accordance with instructions furnished with device)

M5200BS1R
Gray metallic watertight shore power inlet with wingnut-secured lid for water tightness when not in use

M5200CS1R
Gray/yellow metallic watertight connector body with locking ring to make inlet/connector body interface watertight. Cord range is #1 AWG-250 MCM (0.653 max. conductor diameter)

M5200PS1
Gray/yellow metallic watertight plug with locking ring to make plug/receptacle interface watertight. Cord grip range is #1 AWG-250 MCM (0.653 max. conductor diameter)

M5200RS1
Gray metallic, watertight dockside receptacle with wing nut-secured lid for water tightness when not in use.

M5200CS1
Gray/yellow metallic watertight connector body with wing nut-secured lid for water tightness when not in use. For making plug/connector body interface on extension cords or adapter.

MB2003W
Gray metallic Back Box for inlets and receptacles has 15 deg angle section which can be installed in any of 4 positions, 2.0 in. N.P.T. hub.

MB2004W
Gray metallic Back Box for inlets and receptacles has 15 deg angle section which can be installed in any of 4 positions, 2.5 in. N.P.T. hub.

Hubbell Ground Fault Portable Unit, Marine GFCI Adapter, 30A 125V to 15A 125V, Yellow

Ground Fault Portable Unit, Marine GFCI Adapter, 30A 125V to 15A 125V, Yellow

Corrosion Resistant

Humminbird HBL1795 Weatherproof Wallplate

Clear bubble plate, Fits both FS/FD and standard boxes

Clear silicone rubber weatherproof bubble plate for use with all AC toggle switches and PresSwitches. Also ideal for use with lighted handle toggle switches. Not CSA certified.

Hubbell 30A 125V Interior

Locking Devices, Twist-Lock(R), Marine Grade, Replacement Interior, 30A 125V, 2-Pole 3-Wire Grounding, L5-30P, Screw Terminal, Black

Hubbell HBL303NMBL 30A Inlet Boatside Polycarb

• Expertly crafted from premium materials
• Designed to match rigorous quality standards
• High quality at a budget-friendly price

Traditional, stainless steel shore power inlet has new easy-to-wire terminations. Interior is transparent for quick and easy visual inspection. Interior is shielded from the elements by a gasketed, self-closing cover, watertight when cover is screwed in place. Mounting holes are 23/8 in (60.3) on centers. Mounting screws and gasket included. Protective rear enclosure/strain relief also included.

Traditional Stainless steel power outlet has gasketed, self-closing cover,watertight when cover is screwed in place. Mounting holes are 2 3/8 in (60.3) on centers. Mounting screws and gasket included.

Hubbell was the first to offer a marine-ized UL listed 100 AMP Ship-To-Shore system and now, they are the first to offer a marine-ized, UL listed 200 AMP ship-to-shore system.

Hubbell’s 200 AMP Ship-To-Shore System is:

• NEMA 4X rated for superior water resistance.
• Made of copper-free aluminum with an electrostatically applied epoxy/polyester finish.
• Accepts a cord range of #1 AWG ? 250 MCM.
• Pin and sleeves are made of nickel-plated Tellurium copper for superior corrosion and heat resistance.

And fully interchangeable with UL 1686 configured and listed devices such as Crouse-Hinds(R) Arktite(R) or Appleton(R) Powertite(R) (when installed in
accordance with instructions furnished with device)

M5200BS1R
Gray metallic watertight shore power inlet with wingnut-secured lid for water tightness when not in use

M5200CS1R
Gray/yellow metallic watertight connector body with locking ring to make inlet/connector body interface watertight. Cord range is #1 AWG-250 MCM (0.653 max. conductor diameter)

M5200PS1
Gray/yellow metallic watertight plug with locking ring to make plug/receptacle interface watertight. Cord grip range is #1 AWG-250 MCM (0.653 max. conductor diameter)

M5200RS1
Gray metallic, watertight dockside receptacle with wing nut-secured lid for water tightness when not in use.

M5200CS1
Gray/yellow metallic watertight connector body with wing nut-secured lid for water tightness when not in use. For making plug/connector body interface on extension cords or adapter.

MB2003W
Gray metallic Back Box for inlets and receptacles has 15 deg angle section which can be installed in any of 4 positions, 2.0 in. N.P.T. hub.

MB2004W
Gray metallic Back Box for inlets and receptacles has 15 deg angle section which can be installed in any of 4 positions, 2.5 in. N.P.T. hub.

Hubbell was the first to offer a marine-ized UL listed 100 AMP Ship-To-Shore system and now, they are the first to offer a marine-ized, UL listed 200 AMP ship-to-shore system.

Hubbell’s 200 AMP Ship-To-Shore System is:

• NEMA 4X rated for superior water resistance.
• Made of copper-free aluminum with an electrostatically applied epoxy/polyester finish.
• Accepts a cord range of #1 AWG ? 250 MCM.
• Pin and sleeves are made of nickel-plated Tellurium copper for superior corrosion and heat resistance.

And fully interchangeable with UL 1686 configured and listed devices such as Crouse-Hinds(R) Arktite(R) or Appleton(R) Powertite(R) (when installed in
accordance with instructions furnished with device)

M5200BS1R
Gray metallic watertight shore power inlet with wingnut-secured lid for water tightness when not in use

M5200CS1R
Gray/yellow metallic watertight connector body with locking ring to make inlet/connector body interface watertight. Cord range is #1 AWG-250 MCM (0.653 max. conductor diameter)

M5200PS1
Gray/yellow metallic watertight plug with locking ring to make plug/receptacle interface watertight. Cord grip range is #1 AWG-250 MCM (0.653 max. conductor diameter)

M5200RS1
Gray metallic, watertight dockside receptacle with wing nut-secured lid for water tightness when not in use.

M5200CS1
Gray/yellow metallic watertight connector body with wing nut-secured lid for water tightness when not in use. For making plug/connector body interface on extension cords or adapter.

MB2003W
Gray metallic Back Box for inlets and receptacles has 15 deg angle section which can be installed in any of 4 positions, 2.0 in. N.P.T. hub.

MB2004W
Gray metallic Back Box for inlets and receptacles has 15 deg angle section which can be installed in any of 4 positions, 2.5 in. N.P.T. hub.

Hubbell was the first to offer a marine-ized UL listed 100 AMP Ship-To-Shore system and now, they are the first to offer a marine-ized, UL listed 200 AMP ship-to-shore system.

Hubbell’s 200 AMP Ship-To-Shore System is:

• NEMA 4X rated for superior water resistance.
• Made of copper-free aluminum with an electrostatically applied epoxy/polyester finish.
• Accepts a cord range of #1 AWG ? 250 MCM.
• Pin and sleeves are made of nickel-plated Tellurium copper for superior corrosion and heat resistance.

And fully interchangeable with UL 1686 configured and listed devices such as Crouse-Hinds(R) Arktite(R) or Appleton(R) Powertite(R) (when installed in
accordance with instructions furnished with device)

M5200BS1R
Gray metallic watertight shore power inlet with wingnut-secured lid for water tightness when not in use

M5200CS1R
Gray/yellow metallic watertight connector body with locking ring to make inlet/connector body interface watertight. Cord range is #1 AWG-250 MCM (0.653 max. conductor diameter)

M5200PS1
Gray/yellow metallic watertight plug with locking ring to make plug/receptacle interface watertight. Cord grip range is #1 AWG-250 MCM (0.653 max. conductor diameter)

M5200RS1
Gray metallic, watertight dockside receptacle with wing nut-secured lid for water tightness when not in use.

M5200CS1
Gray/yellow metallic watertight connector body with wing nut-secured lid for water tightness when not in use. For making plug/connector body interface on extension cords or adapter.

MB2003W
Gray metallic Back Box for inlets and receptacles has 15 deg angle section which can be installed in any of 4 positions, 2.0 in. N.P.T. hub.

MB2004W
Gray metallic Back Box for inlets and receptacles has 15 deg angle section which can be installed in any of 4 positions, 2.5 in. N.P.T. hub.

Hubbell HBL305CRC 30A Female Connector

30 amp, 125 volt. Yellow nylon body, nickel plated contacts, triple grip nylon cord clamp, individual wire pockets for easy wire terminations

Hubbell HBL305CRP 30A Male Plug

HUBBELL HBL305CRP 30A MALE PLUG

Hubbell HBL305CRR 30A Female Dock Receptacle

30 amp, 125 volt. Yellow, melamine with all nickel plated components, back wired

This device is rated at 28 volts DC and is applicable for all 12, 24 and 32 volt DC fishing reel systems. The device is UL listed and CSA certified. Made of high-visibility yellow nylon that is impact resistant and U. V. stabilized for longer life. Also, the contacts are nickel plated for corrosion resistance.

Yellow locking connector body has rugged, nylon housing and rear dust seal to keep dust and foreign matter out.

Hubbell HBL328DCP 30A DC Plug

Hubbell has introduced a DC rated electrical system designed specifically for larger electric fishing reel systems.

Up until now, larger electrical fishing reel systems typically utilized 30Amp AC rated corrosion resistant devices since there were no DC rated devices.

The new system features a corrosion resistant plug, connector Body and receptacle and can be used along with a Hubbell Outlet box and weather proof cover plate to complete the installation.

These devices are all rated at 28 volts DC and are applicable for all 12, 24 and 32 volt DC fishing reel systems.

The devices are UL listed and CSA certified.

All devices are made of high-visibility yellow nylon that is impact resistant and U.V. stabilized for longer life. Also, the contacts are nickel plated for corrosion resistance.

Hubbell HBL328DCP 30A DC Plug - White

Hubbell has introduced a DC rated electrical system designed specifically for larger electric fishing reel systems.

Up until now, larger electrical fishing reel systems typically utilized 30Amp AC rated corrosion resistant devices since there were no DC rated devices.

The new system features a corrosion resistant plug, connector Body and receptacle and can be used along with a Hubbell Outlet box and weather proof cover plate to complete the installation.

These devices are all rated at 28 volts DC and are applicable for all 12, 24 and 32 volt DC fishing reel systems.

The devices are UL listed and CSA certified.

All devices are made of high-visibility yellow nylon that is impact resistant and U.V. stabilized for longer life. Also, the contacts are nickel plated for corrosion resistance.

This device is rated at 28 volts DC and is applicable for all 12, 24 and 32 volt DC fishing reel systems. The device is UL listed and CSA certified. Made of high-visibility yellow nylon that is impact resistant and U. V. stabilized for longer life. Also, the contacts are nickel plated for corrosion resistance.

Yellow locking single receptacle with abuse-resistant face. HBL328DCR Can be mounted in Hubbell box HBL6080 and used with HBL74CM25WOA weatherproof plate.

Hubbell was the first to offer a marine-ized UL listed 100 AMP Ship-To-Shore system and now, they are the first to offer a marine-ized, UL listed 200 AMP ship-to-shore system.

Hubbell’s 200 AMP Ship-To-Shore System is:

• NEMA 4X rated for superior water resistance.
• Made of copper-free aluminum with an electrostatically applied epoxy/polyester finish.
• Accepts a cord range of #1 AWG ? 250 MCM.
• Pin and sleeves are made of nickel-plated Tellurium copper for superior corrosion and heat resistance.

And fully interchangeable with UL 1686 configured and listed devices such as Crouse-Hinds(R) Arktite(R) or Appleton(R) Powertite(R) (when installed in
accordance with instructions furnished with device)

M5200BS1R
Gray metallic watertight shore power inlet with wingnut-secured lid for water tightness when not in use

M5200CS1R
Gray/yellow metallic watertight connector body with locking ring to make inlet/connector body interface watertight. Cord range is #1 AWG-250 MCM (0.653 max. conductor diameter)

M5200PS1
Gray/yellow metallic watertight plug with locking ring to make plug/receptacle interface watertight. Cord grip range is #1 AWG-250 MCM (0.653 max. conductor diameter)

M5200RS1
Gray metallic, watertight dockside receptacle with wing nut-secured lid for water tightness when not in use.

M5200CS1
Gray/yellow metallic watertight connector body with wing nut-secured lid for water tightness when not in use. For making plug/connector body interface on extension cords or adapter.

MB2003W
Gray metallic Back Box for inlets and receptacles has 15 deg angle section which can be installed in any of 4 positions, 2.0 in. N.P.T. hub.

MB2004W
Gray metallic Back Box for inlets and receptacles has 15 deg angle section which can be installed in any of 4 positions, 2.5 in. N.P.T. hub.

• UV resistant, gray, glass filled thermoplastic polyester box, mounting adapters and globe guards resists abuse and harmful effects of the elements.
• Excellent temperature operating range of -40 degF (-40 degC) to +302 degF (150 deg) for use in areas with wide temperature variations or extreme ambient temperatures.
• High temperature silicone gasketing maintains integrity and molded threads for ease of installation/removal.
• Heat resistant glass globe withstands thermal shock in wet locations and has thread type mounting to assure weather tight sealing.
• High strength protective globe guard helps prevent accidental globe and lamp breakage.
• Accommodates Type A incandescent lamps up to 150 watts.
• UL 1598 Standard for luminaries.
• UL 1598A Marine type luminaries

Pendant mount non-metallic, vapor-tight incandescent luminaries including fixture, mounting cap, guard and heat resistant glass globe. Accepts up to 150 watt Type A incandescent lamp
(not included).

• UV resistant, gray, glass filled thermoplastic polyester box, mounting adapters and globe guards resists abuse and harmful effects of the elements.
• Excellent temperature operating range of -40 degF (-40 degC) to +302 degF (150 deg) for use in areas with wide temperature variations or extreme ambient temperatures.
• High temperature silicone gasketing maintains integrity and molded threads for ease of installation/removal.
• Heat resistant glass globe withstands thermal shock in wet locations and has thread type mounting to assure weather tight sealing.
• High strength protective globe guard helps prevent accidental globe and lamp breakage.
• Accommodates Type A incandescent lamps up to 150 watts.
• UL 1598 Standard for luminaries.
• UL 1598A Marine type luminaries

Ceiling mount non-metallic, vapor-tight incandescent luminaries including the fixture, mounting box, guard and heat resistant glass globe. Accepts up to 150 watt Type A incandescent lamp (not included).

Hebbell PC100 Male Closure Cap, For 100A All Wire

• Cap assemblies provide watertight sealing
• Manufactured with non-metallic material

Hubbell HBL328DCRW 30A 28V DC

Locking Receptacle White

Wallplates and Boxes, Marine Products, 24-32V DC, Receptacle, For Trolling Motor, Yellow, Corrosion Resistant

Traditional stainless steel shore power inlet has gasketed, self-closing cover so interior is shielded from the elements when not in use. Watertight when cover is securely fastened. Mounting holes are 23/8 in (60.3) on centers, and rear portion has 2.171 in (55.1) diameter. Mounting screws and gasket included. IP56 SUITABILITY.

Traditional stainless shore power inlet has gasketed, self-closing cover so that the interior is shielded from the elements when not in use. It is watertight when the cover is securely fastened. The mounting holes are 23/8 in (60.3) on centers, and the rear portion has a 2.171 in (55.1) diameter. Mounting screws and gasket are included. IP56 SUITABILITY.

Hubbell 15kVA 60 Hz Isolation Transformer, With ISO-Boost

• UL listed, CSA certified and UL-3R enclosures meets or exceeds all listing criteria including NEMA, ANSI and OSHA standards
• Shielded for cleaner power
• Encapsulated and completely enclosed design electrical grade silica and resin compounds completely enclose the core and coil to seal out all moisture and air. UL Type 3R enclosure for indoor or outdoor service. Encapsulation eliminates corrosion and insulation deterioration
• Quiet operation with sound levels well below NEMA standards
• Long life UL class 155 degC insulation system. 115 degC rise thru .750 kVA; 180 degC insulation system, 115 degC rise, 1 kVA and above
• Exceeds ABYC’s 4000 Volt HIPOT test requirement
• Made for the Marine Industry by The Shore Power Experts
• 12.5% Taps
• Two Full Current-Carrying Shields
• Vibration-Resistant

Hubbell Marine Wiring Products, Phone/TV Device, Marine Telephone Cord, 50 feet, Yellow

Marine Wiring Products, Phone/TV Device, Marine Telephone Cord, 50 feet, Yellow

Standard Product

Hubbell Replacement Connector Body, Locking Marine Connector, Telephone

Replacement Connector Body, Locking Marine Connector, Telephone

Corrosion Resistant

Hubbell PH6625 Male Connector Phone

Marine Plug, Locking Type Plug, Telephone and Cable TV Devices, Telephone Cable Sets or Adapters, Black

Hubbell Marine Wiring Products, Phone/TV Device, Marine CATV Cable, 25 feet, Yellow

Marine Wiring Products, Phone/TV Device, Marine CATV Cable, 25 feet, Yellow

Standard Product

Hubbell Marine Wiring Products, Phone/TV Device, Marine CATV Cable, 50 feet, Yellow

Marine Wiring Products, Phone/TV Device, Marine CATV Cable, 50 feet, Yellow

Standard Product

Hubbell Marine Wiring Products, Phone/TV Device, Marine CATV Cable, 50 feet, White

Marine Wiring Products, Phone/TV Device, Marine CATV Cable, 50 feet, White

Standard Product

Hubbell 30 Amp 50 feet Yellow Cordset

• Molded flexneck adds life to cable set
• Exclusive copper crimp barrel termination
• Strain relief bull ring protects against stress and strain

Locking Devices, TwistLock, Marine Grade, Ship to Shore Cableset, 30A 125V, 2-Pole 3-Wire Grounding, L5-30, Yellow

Hubbell 50 Amp 125/250V, 3-Pole 4-Wire Grounding, Non-NEMA, Yellow

• Bull ring for strain relief on the terminals
• Copper crimp barrels for reliable terminations
• Thermoset contact carrier is arcing and heat resistance

Locking Devices, TwistLock, Marine Grade, Ship to Shore Cableset, 50A 125V, 2-Pole 3-Wire Grounding, L5-30, Yellow

Hubbell 50 Amp 125/250V, 3-Pole 4-Wire Grounding, Non-NEMA, 50 feet Yellow

• Bull ring for strain relief on the terminals
• Copper crimp barrels for reliable terminations
• Copper crimp barrels for reliable terminations

50 feet (15.2m) yellow vinyl jacketed shore power cable set, #6 AWG type STOW is completely factory pre-wired with molded-on devices. The connector end has a metallic threaded sealing ring for making the inlet/connector interface watertight. IP56 SUITABILITY (BOATSIDE).

Hubbell Metallic Back Box, 100A, 1 1/2

Hubbell Heavy Duty Products, IEC Pin and Sleeve Devices, Industrial Grade, Accessory, Back Box, For 100A 1 1/2 NPT Hub

75 feet yellow, corrosion resistant shore power cable set, 105ø C rated, 2 AWG, 2 pole 3 wire (no neutral), STOW cable with 3 pole 4 wire, 100A 125/250V plug and connector body for use with boats with isolation transformer on board.

Hubbell Marine was the first to offer 100 amp marine grade devices that are considered second to none.

Hubbell developed the standard for 100 amp Pin and Sleeve devices with the National Electric Code and the American Boat and Yacht Council.

Only Hubbell offers 3, 4 and 5 wire 100 amp cable sets for your shore power requirements.

Cable sets manufactured in factory controlled conditions using specially compounded cable to accommodate a full 100 amp.

Features and Benefits.

• Factory assembled. Reliable and consistent terminations.
• 100 Amp pin and Rugged, watertight, sleeve devices. UL listed, AB02029 YC compliant, corrosion resistant.
• UL Listed cable. High visibility yellow, STOW cable, 105 deg C rated, and UL listed.
• Breadth of line. Available in 75, 100, and 125 ft. lengths with and without a neutral.
• Fifty foot extension cords also available.
• 100% inspection. Each cable set is tested to ensure quality performance.

CS75IT4
Yellow 75 ft. (22.8m) corrosion resistant shore power cable set, 105 deg C rated, #2 AWG, 2 pole 3 wire (no neutral), STOW cable with 3 pole 4 wire, 100A 125/250V plug and connector body for use with boats with isolation transformer on board.

CS100IT4
Same as CS75IT4 except 100 ft. (30.4m) in length.

CS754
Yellow 75 ft. (22.8m) corrosion resistant shore power cable set, 105 deg C rated, #2 AWG, 3 pole 4 wire STOW cable.

CS1004
Same as CS754 except 100 ft. (30.4m) in length.

CS50EXT4
Yellow 50 ft. (15.2m) corrosion resistant extension cord, 105 deg C rated, #2 AWG, 3 pole 4 wire STOW cable. For mating with existing shore power cable set.

CS75IT5
Yellow 75 ft. (22.8m) corrosion resistant shore power cable set, 105 deg C rated, #2 AWG, 3 pole 4 wire (no neutral), STOW cable with 4 pole 5 wire, 100A 120/208V plug and connector body for use with boats with isolation transformer on board.

CS50EXT5
Yellow 50 ft. (15.2m) corrosion resistant extension cord, 105 deg C rated, #2 AWG, 4 pole 5 wire STOW cable. For mating with existing shore power cable set.

Note: These cables are built to order and ship via common carrier truck lines. Please allow 3-4 weeks delivery.

Hubbell 25kVA 60 Hz Isolation Transformer, With ISO-Boost

• UL listed, CSA certified and UL-3R enclosures meets or exceeds all listing criteria including NEMA, ANSI and OSHA standards
• Shielded for cleaner power
• Encapsulated and completely enclosed design electrical grade silica and resin compounds completely enclose the core and coil to seal out all moisture and air. UL Type 3R enclosure for indoor or outdoor service. Encapsulation eliminates corrosion and insulation deterioration
• Quiet operation with sound levels well below NEMA standards
• Long life UL class 155 degC insulation system. 115 degC rise thru .750 kVA; 180 degC insulation system, 115 degC rise, 1 kVA and above
• Exceeds ABYC’s 4000 Volt HIPOT test requirement
• Made for the Marine Industry by The Shore Power Experts
• 12.5% Taps
• Two Full Current-Carrying Shields
• Vibration-Resistant

Hubbell 25kVA 60 Hz Isolation Transformer, White

• UL listed, CSA certified and UL-3R enclosures meets or exceeds all listing criteria including NEMA, ANSI and OSHA standards
• Shielded for cleaner power
• Encapsulated and completely enclosed design electrical grade silica and resin compounds completely enclose the core and coil to seal out all moisture and air. UL Type 3R enclosure for indoor or outdoor service. Encapsulation eliminates corrosion and insulation deterioration
• Quiet operation with sound levels well below NEMA standards
• Long life UL class 155 degC insulation system. 115 degC rise thru .750 kVA; 180 degC insulation system, 115 degC rise, 1 kVA and above
• Exceeds ABYC’s 4000 Volt HIPOT test requirement
• Made for the Marine Industry by The Shore Power Experts
• 12.5% Taps
• Two Full Current-Carrying Shields
• Vibration-Resistant

Hubbell HBL102 Boot F/305CRP

• Weatherproof your 305CRP connection
• Stainless steel threaded sealing ring
• Waterproof IP55

Protect your 305CRP connection by covering it with the Hubbell HBL102 Boot. Each weatherproof boot features a stainless steel threaded sealing ring makes connections watertight.