Apeiron A1110 Spring Mount Light - Warm White, Chrome Finish
Part #: A1110Z-11C03N

Product Highlights:

• 4.5 watts
  
• 9-30V DC input
  
• 0 to 100% Dimming
  
• 3" Diameter
  
• Stainless Steel Construction
  
• Active Thermal Management
  
• Exterior Rated
  
• Multiplex Compatible
  
• IP67, Exterior Rated
  
• Up to 50,000 Hours of Operation

• Advanced optical system - 120 degree full angle with even light, no LED "dots" or pixilation
  
• Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity
  
• No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation
  
• In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
  
• Stainless Steel Trim with PVD - Round, square/square, double or triple, five finish options with Physical Vapor Deposition (PVD) coating to provide a very durable surface finish which will not tarnish or discolor
  
• Spring Clip Mounting - Offers simple installation while ensuring a secure fit when installed in dynamic applications

• Active Thermal Management - Continually monitors, and when required, thermally regulates the fixture
  
• If it for any reason begins to overheat, ATM will reduce the LED power level in order to protect the LED source
  
• SmartDriver Integrated - Connect the Apeiron to a wide range of volages without sacrificing light output or lifetime. No external drivers are required and wiring is made simple
  
• AccuWhite - Allows integration of Apeiron fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI). AccuWhite ensures accurate and consistent color matching from fixture to fixture and across product lines
  
• LightLink Compatible - Controllers represent the next generation in lighting control and connectivity because the LightLink modules provide seamless integration of today’s marine dimming systems through a wide variety of desirable interfaces
  
• Multiplex Compatible - Interfaces directly to most Multiplex type dimming systems, including Eplex and Moritz Octoplex systems

Apeiron A1110 Spring Mount Light - Warm White, Brushed Nickel Finish
Part #: A1110Z-41C03N

Product Highlights:

• 4.5 watts
  
• 9-30V DC input
  
• 0 to 100% Dimming
  
• 3" Diameter
  
• Stainless Steel Construction
  
• Active Thermal Management
  
• Exterior Rated
  
• Multiplex Compatible
  
• IP67, Exterior Rated
  
• Up to 50,000 Hours of Operation

• Advanced optical system - 120 degree full angle with even light, no LED "dots" or pixilation
  
• Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity
  
• No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation
  
• In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
  
• Stainless Steel Trim with PVD - Round, square/square, double or triple, five finish options with Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor
  
• Spring Clip Mounting - Offers simple installation while ensuring a secure fit when installed in dynamic applications

• Active Thermal Management - Continually monitors, and when required, thermally regulates the fixture
  
• If it for any reason begins to overheat, ATM will reduce the LED power level in order to protect the LED source
  
• SmartDriver Integrated - Connect the Apeiron to a wide range of volages without sacrificing light output or lifetime
  
• No external drivers are required and wiring is made simple
  
• AccuWhite - Allows integration of Apeiron fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI)
  
• AccuWhite ensures accurate and consistent color matching from fixture to fixture and across product lines
  
• LightLink Compatible - Controllers represent the next generation in lighting control and connectivity with LightLink modules providing seamless integration of today’s marine dimming systems through a wide variety of desirable interfaces
  
• Multiplex Compatible - Interfaces directly to most Multiplex type dimming systems, including Eplex and Moritz Octoplex systems

Apeiron A3120 Screw Mount Light - Red, Cool White, Blue Light, Chrome Finish
Part #: A3120Z-11HAE

The Apeiron A3120 is one light fixture with 3 colors on only 2 wires! You can use your existing switch and wiring to cycle through Red, White and Blue LED colors. Perfect for Hardtop, Cockpit and Arch Lighting.

Product Highlights:

• 1.5 watts
  
• 9-30V DC input
  
• 3 Colors in 1 Fixture with only 2 wires
  
• 3" Diameter
  
• Stainless Steel Construction
  
• 316 SS Removable Trim
  
• Exterior Rated
  
• Screw Mountable
  
• IP67, Exterior Rated
  
• Up to 50,000 Hours of Operation
  
• 2007 IBEX/NMMA Innovation Award Winner

• Advanced optical system - 120 degree full angle with even light, no LED "dots" or pixilation
  
• Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity
  
• No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation
  
• In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
  
• 316 Stainless Steel Trim with PVD - Removable trim ring with Physical Vapor Deposition (PVD) coating to provide a very durable surface finish which will not tarnish or discolor

• SmartDriver Technology - Integrated directly inside every fixture to connect the Apeiron to a wide range of voltages without sacrificing light output or lifetime
  
• No external drivers are required and wiring is made simple
  
• Tri-Light Technology - i2Systems Tri-Light Technology offers 3 colors of light within a single feature with only 2 wires
  
• Simply toggle the input voltage off and back on again to change from one color to the next

Apeiron A3120 Screw Mount Light - Red, Cool White, Blue Light, White Finish
Part #: A3120Z-31HAE

The Apeiron A3120 is one light fixture with 3 colors on only 2 wires! You can use your existing switch and wiring to cycle through Red, White and Blue LED colors. Perfect for Hardtop, Cockpit and Arch Lighting.

Product Highlights:

• 1.5 watts
  
• 9-30V DC input
  
• 3 Colors in 1 Fixture with only 2 wires
  
• 3" Diameter
  
• Stainless Steel Construction
  
• 316 SS Removable Trim
  
• Exterior Rated
  
• Screw Mountable
  
• IP67, Exterior Rated
  
• Up to 50,000 Hours of Operation
  
• 2007 IBEX/NMMA Innovation Award Winner

Ember E1150 LED Step Light, Snap Mount
Part #: E1150Z-11C03N

Product Highlights:

• 2.5 watts
  
• 9-30V DC input/9-15 AC Input
  
• 0 to 100% Dimming
  
• Stainless Steel Construction
  
• Asymmetric Light Distribution
  
• Wide lateral angle
  
• 6 Vibrant Color Options
  
• IP67, Exterior Rated
  
• Up to 50,000 Hours of Operation

• Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination
  
• 0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today’s conventional dimming systems
  
• Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity
  
• No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation
  
• In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
  
• Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor
  
• Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place
  
• Fixture accomodates wall thicknesses ranging from .125" to .625"

• SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture
  
• Connect the Ember to a wide range of voltages without sacrificing light output or lifetime
  
• No external drivers are required and wiring is made simple
  
• AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI)
  
• AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines
  
• LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity
  
• LightLink modules provide seamless integration of today’s marine dimming systems through a wide variety of desirable interfaces

Ember E1150 LED Step Light, Snap Mount
Part #: E1150Z-11A00N

Product Highlights:

• 2.5 watts
  
• 9-30V DC input/9-15 AC Input
  
• 0 to 100% Dimming
  
• Stainless Steel Construction
  
• Asymmetric Light Distribution
  
• Wide lateral angle
  
• 6 Vibrant Color Options
  
• IP67, Exterior Rated
  
• Up to 50,000 Hours of Operation

• Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination
  
• 0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today’s conventional dimming systems
  
• Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity
  
• No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation
  
• In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
  
• Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor
  
• Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place
  
• Fixture accomodates wall thicknesses ranging from .125" to .625"

• SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture
  
• Connect the Ember to a wide range of voltages without sacrificing light output or lifetime
  
• No external drivers are required and wiring is made simple
  
• AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI)
  
• AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines
  
• LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity
  
• LightLink modules provide seamless integration of today’s marine dimming systems through a wide variety of desirable interfaces

Profile P1120 LED Surface Light with 3 Colors in 1 Fixture
Part #: P1120Z-11HAE

The Profile P1120 is a one light fixture with 3 colors on only 2 wires! Use your existing switch and wiring to cycle through Red, White and Blue LED colors. Perfect for Hardtop, Cockpit and Arch lighting.

Product Highlights:

• 1.5 watts
  
• 9-30V DC input
  
• 3 Colors in 1 Fixture
  
• 3" Diameter
  
• Stainless Steel Construction
  
• Exterior Rated
  
• Surface Mountable
  
• IP67, Exterior Rated
  
• Up to 50,000 Hours of Operation
  
• 2007 IBEX/NMMA Innovtion Award Winner

• Advanced optical system - 120 degree full angle and even light, no LED "dots" or pixilation
  
• Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity
  
• No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation
  
• In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
  
• Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor
  
• Surface mounting - Simply mount the fixture with the three included mounting screws and snap on the bezel

• SmartDriver Integrated - Connect the Profile to a wide range of voltages without sacrificing light output or lifetime
  
• No external drivers are required and wiring is made simple
  
• Tri-Light Technology - i2Systems Tri-Light Technology offers 3 colors of light within a single fixture with only 2 wires
  
• Simply toggle the input voltage off and back on again to change from one color to the next

Profile P1120 LED Surface Light with 3 Colors in 1 Fixture
Part #: P1120Z-31HAE

The Profile P1120 is a one light fixture with 3 colors on only 2 wires! Use your existing switch and wiring to cycle through Red, White and Blue LED colors. Perfect for Hardtop, Cockpit and Arch lighting.

Product Highlights:

• 1.5 watts
  
• 9-30V DC input
  
• 3 Colors in 1 Fixture
  
• 3" Diameter
  
• Stainless Steel Construction
  
• Exterior Rated
  
• Surface Mountable
  
• IP67, Exterior Rated
  
• Up to 50,000 Hours of Operation
  
• 2007 IBEX/NMMA Innovation Award Winner

• Advanced optical system - 120 degree full angle and even light, no LED "dots" or pixilation
  
• Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity
  
• No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation
  
• In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
  
• Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor
  
• Surface mounting - Simply mount the fixture with the three included mounting screws and snap on the bezel

• SmartDriver Integrated - Connect the Profile to a wide range of voltages without sacrificing light output or lifetime
  
• No external drivers are required and wiring is made simple
  
• Tri-Light Technology - i2Systems Tri-Light Technology offers 3 colors of light within a single fixture with only 2 wires
  
• Simply toggle the input voltage off and back on again to change from one color to the next

Profile P1140 LED Surface Light with Touch Dimming

Product Highlights:

• 2.5 watts
  
• 9-30V DC input
  
• Touch Dimming Control
  
• Dims up to 20 non-Touch enabled Fixtures
  
• 3" Diameter
  
• Stainless Steel Construction
  
• Exterior Rated

• Advanced optical system - 120 degree full angle. Even light, no LED "dots" or pixilation
  
• 0 to 100% Digital Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today’s conventional dimming systems
  
• Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity.
  
• No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation. In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
  
• Stainless Steel Trim with PVD - Removable trim ring. Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor.
  
• Surface mounting - Simply mount the fixture with the three included mounting screws and snap on the bezel
  

Profile P1100 LED Surface Light
Part #: P1100Z-110C03N

Product Highlights:

• 2 watts
  
• 9-30V DC input
  
• 0 to 100% Dimming
  
• 9 Vibrant Color Options
  
• 3" Diameter
  
• Stainless Steel Construction
  
• Exterior Rated
  
• Surface Mountable
  
• IP67, Exterior Rated
  
• Up to 50,000 Hours of Operation

• Advanced optical system - 120 degree full angle. Even light, no LED "dots" or pixilation
  
• 0 to 100% Digital Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today’s conventional dimming systems
  
• Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity
  
• No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation
  
• In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
  
• Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor
  
• Surface mounting - Simply mount the fixture with the three included mounting screws and snap on the bezel

LightLink LL-101 Marine Dimming Module
Part #: LL-101

Operation is simple! Press and hold the momentary switch to initiate dimming cycle. Dimming cycle continues to dim as long as switch is engaged, ranging from 100% to approximately 5% intensity holding 2 seconds at each position before dimming the opposite direction. Briefly press and release momentary switch for on/off operation.

Specifications:

• Input Voltage: 6-36 Volt DC
  
• Dimensions: Width: 1.5" x Height: 0.5" x Depth: 1.0"

• Compatible with i2Systems Apeiron, Ember and Profile lights
  
• Dimming control via a momentary switch or contact
  
• Small size, encapsulated, fits into most switch boxes

• Apeiron A1110
  
• Apeiron A2162
  
• Ember E1150
  
• Profile P1100

• S-Line S1200

T3311 Swivel LED Reading Light w/Switch - Warm White
Part #: T3311Z-01MCAB

Product Highlights:

• 2 Watts
  
• 9-30V DC Input
  
• Integrated On/Off Switch
  
• Fully Adjustable Ball Joint Design
  
• 22 Degree Beam Angle
  
• Machined Anodized Aluminum Construction
  
• Surface Mount
  
• Up to 50,000 Hours of Operation

• Advanced Optical System - 22 degree beam angle ensures high efficiency, optimal coverage, and sharp cutout
  
• Rugged Design - Impact resistant polycarbonate optic, anodized aluminum housing provides thermal path to dissipate heat away from electronic circuit for maximum LED longevity
  
• No Heat or UV in the Light Beam - With no heat in the light beam, the fixture lens remains much cooler than halogen sources, allowing safe and `burn free’ operation. In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
  
• Machined Anodized Aluminum - Lightweight, durable ruggedized construction
  
• Clear anodizing protects finish from discoloration, tarnishing and corrosion
  
• Surface mounting - Simply mount the fixture with the three included mounting screws

• SmartDriver Integrated - i2Systems SmartDriver technology is integrated directly inside of every fixture
  
• Connect the Reading Light to a wide range of voltages without sacrificing light output or lifetime
  
• No external drivers are required and wiring is made simple
  
• AccuWhite - i2Systems AccuWhite technology allows integration of Reading Light fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI)
  
• AccuWhite ensures accurate and consistent color matching from fixture to fixture and across product lines
  
• No heat or UV in the light beam - With no heat in the light beam, the fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation
  
• In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
  
• Surface mounting - Simply mount the fixture with the three included mounting screws