JBL Apex 4 Channel Amplifier

Class D 1250W Peak

• Speaker-level and low-level inputs let JBL Apex amplifiers integrate with just about any audio input.
• JBL Apex amplifiers have to go through environmental testing that would destroy other amplifiers. JBL freezes them, bakes them, shakes them, blasts them with ultraviolet lights & salt spray and drives them at full power for days at a time.
• JBL engineers every product with a high level of design. In applications where the APEX PA 1254 will be visible, it will enhance the vehicles asthetic not take away from it.
• JBL Apex powersports amplifiers feature an ultra-compact aluminm chassis and smal footprint design to allow for installation almost anywhere.
• JBL Apex powersports amplifiers are engineered to withstand harsh conditions, with fully marinized" circuit boards to ensure flawless power delivery

JBL Apex 2 Channel Amplifier

Class D 750W Peak

• Speaker-level and low-level inputs let JBL Apex amplifiers integrate with just about any audio input.
• JBL Apex amplifiers have to go through environmental testing that would destroy other amplifiers. JBL freezes them, bakes them, shakes them, blasts them with ultraviolet lights & salt spray and drives them at full power for days at a time.
• JBL engineers every product with a high level of design. In applications where the APEX PA 1254 will be visible, it will enhance the vehicles asthetic not take away from it.
• JBL Apex powersports amplifiers feature an ultra-compact aluminm chassis and smal footprint design to allow for installation almost anywhere.
• JBL Apex powersports amplifiers are engineered to withstand harsh conditions, with fully marinized" circuit boards to ensure flawless power delivery

JBL Apex 4 Channel Amplifier

Class D 450W Peak

• Speaker-level and low-level inputs let JBL Apex amplifiers integrate with just about any audio input.
• JBL Apex amplifiers have to go through environmental testing that would destroy other amplifiers. JBL freezes them, bakes them, shakes them, blasts them with ultraviolet lights & salt spray and drives them at full power for days at a time.
• JBL engineers every product with a high level of design. In applications where the APEX PA 1254 will be visible, it will enhance the vehicles asthetic not take away from it.
• JBL Apex powersports amplifiers feature an ultra-compact aluminm chassis and smal footprint design to allow for installation almost anywhere.
• JBL Apex powersports amplifiers are engineered to withstand harsh conditions, with fully marinized" circuit boards to ensure flawless power delivery

JBL AURA-BT-M Compact High Performance Bluetooth Marine Stereo

• 4 speaker performance audio
• Bluetooth 5.3 w/ 2-way control
• Intuitive illumination and backlit button controls
• Compact and shallow depth mounting enclosure
• Front IPX6 rating, designed to withstand the elements
• DC 12v Powered

Elevate your BT audio streaming experience with the JBL AURA-BT-M compact high performance Bluetooth Marine Stereo! AURA-BT-M supports up to 2 pair of JBL speakers, allowing for front and rear zone control, and is designed to withstand the elements. With Bluetooth 2-way control, it is easy to control the party from your personal BT device or from the AURA-BT-M marine stereo. Versatile in its compact size and small mounting enclosure, the AURA-BT-M has a front IPX6 rating to allow for mounting in all types of product vehicle segments, locations, and environments. Light up the day or night with the AURA-BT-M illumination features, selectable with 2 different light modes, or the ability to turn off the lighting feature.

• JBL AURA-BT-M Marine Stereo
• Wire Harness w/ Waterproof Connector
• Corrosion Resist Mounting Screws (x2)
• Owners Manual
• Quick Start Guide

JBL JAM3000 AM/FM/Bluetooth/USB Source unit

• 2.8 monochrome LCD display
• IP66 marine-rated
• 3-channel 2-volt pre-outs
• AM/FM Tuner
• Bluetooth connectivity for music streaming

The all new JBLJAM3000 features AM/FM

JBL JAM5000N Stereo with Bluetooth

• 2.8 feet’ Color TFT Marine Audio Source Unit
• RMS Power Output 15Wx4
• Wireless Bluetooth Streaming
• Best-in-Class AM/FM/WB performance
• IP66 Marine Rated
• 2ohm Stable
• DAB+ ready
• NMEA 2000 certified

The all new JBLJAM5000N features AM/FM/WB, BT5.0, USB input, 2.8 TFT color screen

JBL MA5055AM Marine Amplifier 5 channel

• The JBL marine amplifier features a low-profile chassis and a small overall footprint to fit in more vehicles where available space is limited.
• Speaker-level and low-level inputs allow the marine to integrate with both aftermarket and factory marine stereo systems.
• Unlike many amplifiers available at similar prices, the JBL marine amplifier features variable electronic crossovers and bass boost circuits allowing for precise system tuning and performance
• The marine amplifier has been engineered using Balanced Differential Inputs to ensure low noise and distortion even at high output levels. This also makes it far less susceptible to line induced radiated engine noise.
• When low-level inputs are used, this control adjusts the input sensitivity between 200mVrms and 4Vrms. When high-level inputs are used, this control adjusts the input sensitivity between 1Vrms and 22Vrms
• On-board circuitry protects the marine amplifier from shorts, hightemperature, overvoltage and undervoltage. An LED indicator is provided to let you know when one of these conditions exists.
• This switch changes the input phase to inverted or non-inverted. This is especially helpful as part of system tuning based on the enclosure type and location in the boat.
• The RBC wired remote is an easy installation and can be mounted for convenient volume adjustment from driver’s seat.
• The JBL marine A5055 5channels subwoofer amplifier delivers 760-Watts RMS using a Class AB+D amplifier design to ensure high output and minimum current draw.
• Turn-on-mode - This switch changes DC to REM to adapt with low-level signals or high-level signals, this is especially helpful as part of remote turn-on lead of your installation more choice .A selectable "Turnon mode" can protect battery to avoid current drain, when you don’t expect turn on your amplifier.

The marine A5055 5-channel amplifier delivers a powerful 50-Watts RMS to each of the front and rear speakers in your boat, and a pounding 500-Watts RMS to the subwoofer channel - a much smarter ratio of subwoofer-to-full-range power than what is typical in 5-channel amps. You can also bridge the amp to 3-channel mode to deliver 140-Watts RMS to your front speakers while driving your sub with 500-Watts RMS. Speaker-level inputs allow this amplifier to integrate into almost any system, even one using your marine’s factory radio. Separate high-pass and low-pass crossovers on the front and rear channels allow you dial in the perfect roll off to best suit speaker placement and cabin acoustics. The subwoofer channel features a low-pass crossover, selectable bass boost, and phase switch to optimize subwoofer performance.

• One marine A5055 five channel amplifier
• 4 Bare wire-to-RCA adapters
• Six 30A ATO fuses (3 installed, 3 spare)
• Remote bass control module
• 16.5 feet Remote control cable (RJ-25 plugs on both ends)
• 2 Self-tapping screws for remote (M3 x 15mm)
• 4 Mounting screws (M4 x 53mm)
• Owner’s Manual
• Two JBL stickers
• 1 logo badge

JBL Marine A600 Amplifier

• Compact size
• High and low level input
• Variable crossover and bass boost
• Low noise and distortion
• Input Level Control
• Full on-board protection
• Phase Switch
• RBC wired remote
• Class D amp technology
• Turn-on mode

The JBL marine A600 mono subwoofer amplifier delivers 600-Watts RMS using a Class D amplifier design to ensure high output and minimum current draw. Speaker-level inputs allow this amplifier to integrate into almost any system, even one using your marine’s factory radio. You can use the low-pass filter and variable bass boost to maximize the performance of your subwoofer and enclosure, while a phase switch ensures that the bass will blend well with your full-range speakers.

• Marine A600 mono subwoofer marine amplifier
• 30A ATO fuses x 4 (2 installed, 2 spare)
• Bare wire-to-RCA adapters x 2
• Remote bass control module
• 16.5 feet Remote control cable (RJ-25 plugs on both ends)
• Self-tapping screws for remote (M3 x 15mm) x 2
• Mounting screws (M4 x 53mm) x 4
• Owners manual
• JBL Stickers x 2
• Logo badge

JBL MA754AM Amplifier

• The JBL marine amplifier features a low-profile chassis and a small overall footprint to fit in more vehicles where available space is limited.
• Speaker-level and low-level inputs allow the marine to integrate with both aftermarket and factory marine stereo systems
• Unlike many amplifiers available at similar prices, the JBL marine amplifier features variable electronic crossovers and bass boost circuits allowing for precise system tuning and performance.
• The marine amplifier has been engineered using Balanced Differential Inputs to ensure low noise and distortion even at high output levels. This also makes it far less susceptible to line induced radiated engine noise.
• When low-level inputs are used, this control adjusts the input sensitivity between 200mVrms and 4Vrms. When high-level inputs are used, this control adjusts the input sensitivity between 1Vrms and 22Vrms
• On-board circuitry protects the marine amplifier from shorts, hightemperature, overvoltage and undervoltage. An LED indicator is provided to let you know when one of these conditions exists.
• This switch changes the input phase to inverted or non-inverted. This is especially helpful as part of system tuning based on the enclosure type and location in the boat.
• Using multiple amplifiers, the marine A754 has full range preamp outputs allowing you to feed an additional amplifier without using splitters.
• The JBL marine A754 4 channels subwoofer amplifier delivers 400-Watts RMS using a Class H amplifier design to ensure high output and minimum current draw.
• This switch changes DC to REM to adapt with low-level signals or high-level signals, this is especially helpful as part of remote turn-on lead of your installation more choice .A selectable "Turnon mode" can protect battery to avoid current drain, when you don’t expect turn on your amplifier.

The marine A754 4-channel amplifier delivers a powerful 75-Watts RMS to each of the front and rear speakers in your boat. You can also bridge the amp to 2-channel mode to drive a couple subs with 200 watts RMS or 3-channel mode to drive both a pair of full range speakers and a subwoofer. Speaker-level inputs allow this amplifier to integrate into almost any system, even one using your marine’s factory radio. Separate high-pass and low-pass crossovers on the front and rear channels allow you dial in the perfect roll off to best suit speaker placement and cabin acoustics.

• One marine A754 four channel amplifier
• 4 Bare wire-to-RCA adapters
• Four 30A ATO fuses (2 installed, 2 spare)
• Two JBL stickers
• Owner’s Manual
• 4 Mounting screws (M4 x 53mm)
• 1 logo badge

JBL Wake Series Dust Cover

Compatible with the INF-R3000 and the JBL-R3500 marine source units, this stereo dust cover adds additional protection for your marine source unit. After a long day on the water, your stereo continues to see harsh elements such as the scorching sun, dust and grime, and rain showers. This silicone grey rubber cover gives your stereo added protection from those elements and thus an inexpensive added protective measure.

JBL MT10HLW 10 Tower Speakers - White

• 10 in 2-way marine tower speakers with RGB LED lighting (pair)
• 360-degree swivel low-profile mounting brackets fit 1-3/4 in to 3 in bars

• AM/FM
• Bluetooth Streaming
• 4 x 45 watts
• Auxiliary Input
• USB Input For USB Drives
• 2 pair of RCA Pre-outs
• RF Remote Ready
• Hard wired remote capable, MCB20