Ultima Switch
New digital technology uses the Mirus field effect detector cells producing micro-electrical fields that detect disruptions caused by water and fluids. Detector cells are totally sealed, are never in contact with the water, will not corrode and are not affected by oil or foreign debris.
ULTIMA activates at a 50 mm (2") fluid level and deactivates at a 20 mm (3/4") fluid level. A 3 second delay prevents false starts. ULTIMA switch is rated to handle all Johnson Pump submersible pumps pumps up to 20 amps at 12 or 24 volts.

Features:

Bilge Mate, 12V
A small, price-wise alternative in the submersible bilge family. The low-cost choice for boat owners who do not want to forsake quality.
CE-Approved

Features:

• Capacity straight (13.6V/27V): 30 I/min. - 475 GPH
  
• Voltage: 12 V DC
  
• Amperage: 2.5A
  
• Fuse Size: 3 A
  
• Connection: 3/4"
  
• Max height: 100mm - 4"
  
• Weight 0.35kg - 12oz.

Cartridge Bilge Pumps 500 GPH
For 500 GPH, we have improved the design with easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. The pumps are delivered including both a straight and a 90 degree smooth elbow Dura-Port as well as a removable check valve.
Both the Cartridge and the Ultima Combo pumps may be manually operated via the Johnson Pump bilge control panel.
CE-Approved

Features:

• Compact, all-in-one motor/impeller unit
  
• No tools needed for maintenance
  
• Extremely energy efficient
  
• Water-cooled motor for long service intervals
  
• Meets the international standard, ISO 8849 marine
  
• Capacity 3 ft (0.9 m) head (13.6 V): 33 l/min - 525 GPH
  
• Capacity Straight: 40 l/min - 630 GPH
  
• Amerpage: 2.5A
  
• Fuse Size: 5 A
  
• Connection: 3/4"
  
• Max Height: 112 mm - 4.4"
  
• Weight: 0.27 kg - 9.6 oz.

Cartridge Bilge Pumps
For 500 GPH, 750 GPH, and 1000 GPH, we have improved the design with easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. The pumps are delivered including both a straight and a 90 degree smooth elbow Dura-Port as well as a removable check valve.

Features:

• Capacity 3 ft (0.9 m) head (13.6 V): 44 l/min - 700 GPH
  
• Capacity Straight: 50 l/min - 800 GPH
  
• Amperage: 3 A
  
• Fuse Size: 5 A
  
• Connection: 3/4"
  
• Max Height: 112 mm - 4.4"
  
• Weight: 0.27 kg - 9.6 oz.

Cartridge Bilge Pumps 1000 GPH
The 1000 GPH incorporates some of the most advanced features in the industry, features developed from service in a wide variety of uses including racing, cruising, sport fishing, and demanding commercial duties. We have improved the design with easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. The pumps are delivered including both a straight and a 90 degree smooth elbow Dura-Port as well as a removable check valve.
Both the Cartridge and the Ultima Combo pumps may be manually operated via the Johnson Pump bilge control panel.
CE-approved

Features:

• Compact, all-in-one motor/impeller unit
  
• No tools needed for maintenance
  
• Extremely energy efficient
  
• Water-cooled motor for long service intervals
  
• Meets the international standard, ISO 8849 marine
  
• Capacity 3 ft (0.9 m) head (13.6 V): 50 l/min - 800 GPH
  
• Capacity Straight: 63 l/min - 1000 GPH
  
• Amperage: 3.2 A
  
• Fuse Size: 5 A
  
• Connection: 3/4"
  
• Max Height: 112 mm - 4.4"
  
• Weight: 0.27 kg - 9.6 oz.

Cartridge Bilge Pump 1250 GPH
The 1250 GPH incorporate some of the most advanced features in the industry, features developed from service in a wide variety of uses including racing, cruising, sport fishing, and demanding commercial duties. Both the Cartridge and the Ultima Combo pumps may be manually operated via the Johnson Pump bilge control panel.
CE-Approved

Features:

• Compact, all-in-one motor/impeller unit
  
• No tools needed for maintenance
  
• Extremely energy efficient
  
• Water-cooled motor for long service intervals
  
• Meets the international standard, ISO 8849 marine
  
• Pump body: Thermoplastic
  
• Shaft seal: Lip seal
  
• Shaft: Stainless steel (SS2343)
  
• Voltage: 12 V DC
  
• Capacity 3 ft (0.9 m) head (13.6 V): 60 l/min - 952 GPH
  
• Capacity Straight: 73 l/min - 1150 GPH
  
• Amerpage: 3 A
  
• Fuse Size: 5 A
  
• Connection: 1 1/8"
  
• Max Height: 112 mm - 4.4"
  
• Weight: 0.32 kg - 10.4 oz.

Heavy Duty Bilge Pump 1600 series 12v:
The best choice when you are looking for high performance, heavy duty pumps
designed to meet and exceed the tough demands of commercial and recreational duty. This pump has a liquid cooled, 12-pole motor with double ball bearings for extended service life. The 2200 motor is sealed off by a mechanical seal design, while the 1600 model has lipseal. The impeller is carefully designed and tested to maximize head and flow. The 4000 features a robust motor design, mechanical shaft seal, high impact ABS plastic and unique threaded port design. Universal base plate and a choice of 1-1/2" or 2" ports makes for a simple installation. Removable check valve included.
CE-Approved

Features:

• Heavy duty, 12-pole double ball bearing motor
  
• Liquid cooled for extended motor life
  
• Quality engineered mechanical/lip seal
  
• ISO 8849 Marine and CE standards
  
• Easily interchangeable with most similar bilge pumps
  
• Pump body: Thermoplastic
  
• Shaft seal: Mechanical seal
  
• Shaft: Stainless steel (SS2343)
  
• Voltage: 12 V
  
• Capacity 1.0 m head (13.6 V/27 V): 98 l/min - 1550 GPH
  
• Capacity straight (13.6 V/27 V): 100 l/min - 1600 GPH
  
• Amperage: 7 A
  
• Fuse Size: 10 A
  
• Connection: 1-1/8" and 1-1/4"
  
• Shaft: SS2343
  
• Wire size: 1.3 mm2 - 16 GA
  
• Max height 149 mm - 5.86"
  
• Weight 1.3 kg - 2.75 lbs

Heavy Duty Bilge Pump 2200 series 12v:
The best choice when you are looking for high performance, heavy duty pumps
designed to meet and exceed the tough demands of commercial and recreational duty. This pump has a liquid cooled, 12-pole motor with double ball bearings for extended service life. The 2200 motor is sealed off by a mechanical seal design, while the 1600 model has lipseal. The impeller is carefully designed and tested to maximize head and flow. The 4000 features a robust motor design, mechanical shaft seal, high impact ABS plastic and unique threaded port design. Universal base plate and a choice of 1-1/2" or 2" ports makes for a simple installation. Removable check valve included.
CE-Approved

Features:

• Heavy duty, 12-pole double ball bearing motor
  
• Liquid cooled for extended motor life
  
• Quality engineered mechanical/lip seal
  
• ISO 8849 Marine and CE standards
  
• Easily interchangeable with most similar bilge pumps
  
• Pump body: Thermoplastic
  
• Shaft seal: Mechanical seal
  
• Shaft: Stainless steel (SS2343)
  
• Voltage: 12 V
  
• Capacity 1.0 m head (13.6 V/27 V): 120 l/min - 1900 GPH
  
• Capacity straight (13.6 V/27 V): 130 l/min - 2060 GPH
  
• Amperage: 7.5 A
  
• Fuse Size: 12 A
  
• Connection: 1-1/8" and 1-1/4"
  
• Shaft: SS2343
  
• Wire size: 1.3 mm2 - 16 GA
  
• Max height 177 mm - 7"
  
• Weight 2.7 kg - 6 lbs

Heavy Duty Bilge Pump 4000 Series 12v:
The best choice when you are looking for high performance, heavy duty pumps designed to meet and exceed the tough demands of commercial and recreational duty. This pump has a liquid cooled, 12-pole motor with double ball bearings for extended service life. The 2200 motor is sealed off by a mechanical seal design, while the 1600 model has lipseal. The impeller is carefully designed and tested to maximize head and flow. The 4000 features a robust motor design, mechanical shaft seal, high impact ABS plastic and unique threaded port design. Universal base plate and a choice of 1-1/2" or 2" ports makes for a simple installation. Removable check valve included.
CE-Approved

Features:

• Heavy duty, 12-pole double ball bearing motor
  
• Liquid cooled for extended motor life
  
• Quality engineered mechanical/lip seal
  
• ISO 8849 Marine and CE standards
  
• Easily interchangeable with most similar bilge pumps
  
• Pump body: Thermoplastic
  
• Shaft seal: Mechanical seal
  
• Shaft: Stainless steel (SS2343)
  
• Voltage: 12 V
  
• Capacity 1.0 m head (13.6 V/27 V): 164 l/min - 2600 GPH
  
• Capacity straight (13.6 V/27 V): 252 l/min - 4000 GPH
  
• Amperage: 15 A
  
• Fuse Size: 25 A
  
• Connection: 1-1/8" and 1-1/4"
  
• Shaft: SS2343
  
• Wire size: 2 mm2 - 14 GA
  
• Max height 216 mm - 8.5"
  
• Weight 2.45 kg - 5.4 lbs

500 GPH Ultima Combo 12V
Pump with automatic operation equipped with the Ultima switch. Voltage 12 V
DC. We have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. The pumps will be delivered including both a straight and a 90 degree smooth elbow Dura-Port as well as a removable check valve.
CE-Approved

Features:

• Compact, all-in-one motor/impeller unit
  
• No tools needed for maintenance
  
• Extremely energy efficient
  
• Water-cooled motor for long service intervals
  
• Meets the international standard, ISO 8849 marine
  
• Pump Body: Thermoplastic
  
• Shaft Seal: Lip Seal
  
• Shaft: Stainless steel (SS2343)
  
• Voltage: 12 V DC
  
• Capacity 3 ft (0.9 m) head (13.6 V) 33 l/min - 525 GPH
  
• Capacity straight (13.6 V): 40 l/min - 630 GPH
  
• Amperage: 2.5 A
  
• Fuse Size: 5 A
  
• Connection: 3/4"
  
• Max height 112 mm - 4.4"
  
• Weight 0.4 kg - 14.4 oz.

500 GPH Cartridge Combo Series 12V
Combines the line of cartridge bilge pumps with automatic operation. Equipped with a non-clogging electronic float switch.
CE-Approved

Features:

• Compact, all-in-one motor/impeller unit
  
• No tools needed for maintenance
  
• Extremely energy efficient
  
• Water-cooled motor for long service intervals
  
• Meets the international standard, ISO 8849 marine
  
• Pump Body: Thermoplastic
  
• Shaft Seal: Lip seal
  
• Shaft: Stainless steel (SS2343)
  
• Voltage: 12 V DC
  
• Capacity 3 ft (0.9 m) head (13.6 V): 33 l/min - 525 GPH
  
• Capacity straight (13.6 V): 40 l/min - 630 GPH
  
• Amperage: 2.5 A
  
• Fuse Size: 5 A
  
• Connection: 3/4"

750 GPH Ultima Combo 12V
Pump with automatic operation equipped with the Ultima switch. Voltage 12 V DC. We have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. The pumps will be delivered including both a straight and a 90 degree smooth elbow Dura-Port as well as a removable check valve.
CE-Approved

Features:

• Compact, all-in-one motor/impeller unit
  
• No tools needed for maintenance
  
• Extremely energy efficient
  
• Water-cooled motor for long service intervals
  
• Meets the international standard, ISO 8849 marine
  
• Pump Body: Thermoplastic
  
• Shaft Seal: Lip Seal
  
• Shaft: Stainless steel (SS2343)
  
• Voltage: 12 V DC
  
• Capacity 3 ft (0.9 m) head (13.6 V) 44 l/min - 700 GPH
  
• Capacity straight (13.6 V): 50 l/min - 800 GPH
  
• Amperage: 3 A
  
• Fuse Size: 5 A
  
• Connection: 3/4"
  
• Max height 112 mm - 4.4"
  
• Weight 0.4 kg - 14.4 oz.

750 GPH Cartridge Combo Series 12V

Combines the line of cartridge bilge pumps with automatic operation. Equipped with a non-clogging electronic float switch.
CE-Approved

Features:

• Compact, all-in-one motor/impeller unit
  
• No tools needed for maintenance
  
• Extremely energy efficient
  
• Water-cooled motor for long service intervals
  
• Meets the international standard, ISO 8849 marine
  
• Pump Body: Thermoplastic
  
• Shaft Seal: Lip seal
  
• Shaft: Stainless steel (SS2343)
  
• Voltage: 12 V DC
  
• Capacity 3 ft (0.9 m) head (13.6 V): 44 l/min - 700 GPH
  
• Capacity straight (13.6 V): 50 l/min - 800 GPH
  
• Amperage: 3 A
  
• Fuse Size: 5 A
  
• Connection: 3/4"

1000 GPH Ultima Combo 12v
Pump with automatic operation equipped with the Ultima switch. Voltage 12 V DC. We have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. The pumps will be delivered including both a straight and a 90 degree smooth elbow Dura-Port as well as a removable check valve.
CE-Approved

Features:

• Compact, all-in-one motor/impeller unit
  
• No tools needed for maintenance
  
• Extremely energy efficient
  
• Water-cooled motor for long service intervals
  
• Meets the international standard, ISO 8849 marine
  
• Pump Body: Thermoplastic
  
• Shaft Seal: Lip Seal
  
• Shaft: Stainless steel (SS2343)
  
• Voltage: 12 V DC
  
• Capacity 3 ft (0.9 m) head (13.6 V) 50 l/min - 800 GPH
  
• Capacity straight (13.6 V): 63 l/min - 1000 GPH
  
• Amperage: 3.2 A
  
• Fuse Size: 5 A
  
• Connection: 3/4"
  
• Max height 112 mm - 4.4"
  
• Weight 0.4 kg - 14.4 oz.

1250 GPH Ultima Combo 12v
Part #: 08203-00

Pump with automatic operation equipped with the Ultima switch. 12VDC. Easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. The pumps will be delivered including both a straight and a 90 degree smooth elbow Dura-Port (except for the 1250 gph one) as well as a removable check valve.
CE-Approved

Features:

• Compact, all-in-one motor/impeller unit
  
• No tools needed for maintenance
  
• Extremely energy efficient
  
• Water-cooled motor for long service intervals
  
• Meets the international standard, ISO 8849 marine
  
• Pump Body: Thermoplastic
  
• Shaft Seal: Lip Seal
  
• Shaft: Stainless steel (SS2343)
  
• Voltage: 12 V DC
  
• Capacity 3 ft (0.9 m) head (13.6 V) 60 l/min - 952 GPH
  
• Capacity straight (13.6 V): 73 l/min - 1150 GPH
  
• Amperage: 3 A
  
• Fuse Size: 5 A
  
• Connection: 1-1/8"
  
• Max height 112 mm - 4.4"
  
• Weight 0.45 kg - 16 oz.

Ultima Bilge Pump
UltimaBilge Pumps are the latest addition to the Johnson Pump brand lineup. Integration of the Ultima "field effect" sensing technology into the bilge pump body creates a sleek, reliable and compact unit with integrated switch ready to install and run for years and years of unerring service. Available in 600-800-1000-1250 GPH versions. Voltage 12 V DC. For UltimaBilge 600 GPH-1000 GPH, we have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. These pumps will be delivered including both a straight and a 90 degree smooth elbow Dura-Port.

All version are delivered with a removable check valve.

The Ultima Bilge pumps may be manually operated via the Johnson Pump bilge control panel.
CE-Approved

Features:

• Compact, all-in-one unit
  
• Integrated Ultima Switch sensing right into the pump body
  
• No Mercury
  
• Removable clip on basket design
  
• Removable impeller cover allows for easy clean out
  
• 3-wire device can be run in auto or manual override mode
  
• No tools needed for maintenance
  
• Extremely energy efficient
  
• Water-cooled motor for long service intervals
  
• Meets the international standard, ISO 8849 marine
  
• Pump Body: ABS
  
• Shaft Seal: Lip Seal
  
• Shaft: Stainless steel
  
• Voltage: 12 V DC
  
• Capacity 3 ft (0.9 m) head (13.6 V): 32 l/min - 500 GPH
  
• Capacity straight (13.6 V): 38 l/min - 600 GPH
  
• Amperage: 2.5 A
  
• Fuse Size: 5 A
  
• Connection: 3/4"
  
• Length:142 mm - 6"
  
• Width:82 mm - 3.2"
  
• Height:105 mm - 4.1"
  
• Weight:0.66 kg - 23.3 oz.

Ultima Bilge Pump
UltimaBilge Pumps are the latest addition to the Johnson Pump brand lineup. Integration of the Ultima "field effect" sensing technology into the bilge pump body creates a sleek, reliable and compact unit with integrated switch ready to install and run for years and years of unerring service. Available in 600-800-1000-1250 GPH versions. Voltage 12 V DC. For UltimaBilge 600 GPH-1000 GPH, we have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. These pumps will be delivered including both a straight and a 90 degree smooth elbow Dura-Port.

All version are delivered with a removable check valve.

The Ultima Bilge pumps may be manually operated via the Johnson Pump bilge control panel.
CE-Approved

Features:

• Compact, all-in-one unit
  
• Integrated Ultima Switch sensing right into the pump body
  
• No Mercury
  
• Removable clip on basket design
  
• Removable impeller cover allows for easy clean out
  
• 3-wire device can be run in auto or manual override mode
  
• No tools needed for maintenance
  
• Extremely energy efficient
  
• Water-cooled motor for long service intervals
  
• Meets the international standard, ISO 8849 marine
  
• Pump Body: ABS
  
• Shaft Seal: Lip Seal
  
• Shaft: Stainless steel
  
• Voltage: 12 V DC
  
• Capacity 3 ft (0.9 m) head (13.6 V): 38 l/min - 600 GPH
  
• Capacity straight (13.6 V): 51 l/min - 800 GPH
  
• Amperage: 3 A
  
• Fuse Size: 5 A
  
• Connection: 3/4"
  
• Length:142 mm - 6"
  
• Width:82 mm - 3.2"
  
• Height:105 mm - 4.1"
  
• Weight:0.66 kg - 23.3 oz.

Ultima Bilge Pump
UltimaBilge Pumps are the latest addition to the Johnson Pump brand lineup. Integration of the Ultima "field effect" sensing technology into the bilge pump body creates a sleek, reliable and compact unit with integrated switch ready to install and run for years and years of unerring service. Available in 600-800-1000-1250 GPH versions. Voltage 12 V DC. For UltimaBilge 600 GPH-1000 GPH, we have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. These pumps will be delivered including both a straight and a 90 degree smooth elbow Dura-Port.

All version are delivered with a removable check valve.

The Ultima Bilge pumps may be manually operated via the Johnson Pump bilge
control panel.
CE-Approved

Features:

• Compact, all-in-one unit
  
• Integrated Ultima Switch sensing right into the pump body
  
• No Mercury
  
• Removable clip on basket design
  
• Removable impeller cover allows for easy clean out
  
• 3-wire device can be run in auto or manual override mode
  
• No tools needed for maintenance
  
• Extremely energy efficient
  
• Water-cooled motor for long service intervals
  
• Pump Body: ABS
  
• Shaft Seal: Lip Seal
  
• Shaft: Stainless steel (SS2343)
  
• Voltage: 12 V DC
  
• Capacity 3 ft (0.9 m) head (13.6 V): 44 l/min - 700 GPH
  
• Capacity straight (13.6 V): 64 l/min - 1000 GPH
  
• Amperage: 3.2 A
  
• Fuse Size: 5 A
  
• Connection: 3/4"
  
• Length:142 mm - 6"
  
• Width:82 mm - 3.2"
  
• Height:105 mm - 4.1"
  
• Weight:0.66 kg - 23.3 oz.

Ultima Bilge Pump
UltimaBilge Pumps are the latest addition to the Johnson Pump brand lineup. Integration of the Ultima "field effect" sensing technology into the bilge pump body creates a sleek, reliable and compact unit with integrated switch ready to install and run for years and years of unerring service. Available in 600-800-1000-1250 GPH versions. Voltage 12 V DC. For UltimaBilge 600 GPH-1000 GPH, we have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. The pumps are delivered including both a straight and a 90 degree smooth elbow Dura-Port. For UltimaBilge 1250GPH we include threaded 1.1/4" & 1.1/8" discharge port.

All version are delivered with a removable check valve.

The Ultima Bilge pumps may be manually operated via the Johnson Pump bilge control panel.
CE-Approved

Features:

• Compact, all-in-one unit
  
• Integrated Ultima Switch sensing right into the pump body
  
• No Mercury
  
• Removable clip on basket design
  
• Removable impeller cover allows for easy clean out
  
• 3-wire device can be run in auto or manual override mode
  
• No tools needed for maintenance
  
• Extremely energy efficient
  
• Water-cooled motor for long service intervals
  
• Pump Body: ABS
  
• Shaft Seal: Lip Seal
  
• Shaft: Stainless steel (SS2343)
  
• Voltage: 12 V DC
  
• Capacity 3 ft (0.9 m) head (13.6 V): 51 l/min - 800 GPH
  
• Capacity straight (13.6 V): 79 l/min - 1250 GPH
  
• Amperage: 3 A
  
• Fuse Size: 5 A
  
• Connection: 1-1/8" and 1-1/4"
  
• Length:142 mm - 6"
  
• Width:82 mm - 3.2"
  
• Height:117 mm - 4.6"
  
• Weight:0.66 kg - 23.3 oz.

Automatic Submersible Bilge Pump - Electromagnetic Switch
01604-00

• Heavy-Duty, high-performance pump
  
• Exceeds the tough demands of commercial and recreational duty
  
• Liquid Cooled
  
• 12-Pole motor with double ball bearings
  
• Lip Seal design construction
  
• Prewired with automatic float switch(with Manual Over-ride Operation)
  
• Optional and removable check valve included
  
• 1-⅛" & 1-¼" hose adapters included
  
• 3 year warranty

Automatic Submersible Bilge Pump - Ultima Switch
01674-001

• Heavy-Duty, high-performance pump
  
• Exceeds the tough demands of commercial and recreational duty
  
• Liquid Cooled
  
• 12-Pole motor with double ball bearings
  
• Lip Seal design construction
  
• Prewired with automatic float switch(with Manual Over-ride Operation)
  
• Optional and removable check valve included
  
• 1-⅛" & 1-¼" hose adapters included
  
• 3 year warranty

Automatic Submersible Bilge Pump - Electromagnetic Switch
02204-00

• Heavy-Duty, high-performance pump
  
• Exceeds the tough demands of commercial and recreational duty
  
• Liquid Cooled
  
• 16-Pole motor with double ball bearings
  
• Lip Seal design construction
  
• Prewired with automatic float switch(with Manual Over-ride Operation)
  
• Optional and removable check valve included
  
• 1-⅛" & 1-¼" hose adapters included
  
• 3 year warranty

Automatic Submersible Bilge Pump - Ultima Switch
02274-001

• Heavy-Duty, high-performance pump
  
• Exceeds the tough demands of commercial and recreational duty
  
• Liquid Cooled
  
• 16-Pole motor with double ball bearings
  
• Lip Seal design construction
  
• Prewired with automatic float switch(with Manual Over-ride Operation)
  
• Optional and removable check valve included
  
• 1-⅛" & 1-¼" hose adapters included
  
• 3 year warranty

Multiple Port Shower Sump 12v
This compact shower sump system is designed to meet the higher demands from today’s boating industry where more equipment is used. This also includes the fresh water system onboard and involves showers, dish-washing machines, galley sinks, etc. The shower sump turns on/off automatically using our Ultima switch technology and has multiple inlet ports for handling waste water from more than one tapping point. The check valve on the outlet stops water from flowing back into the tank. The tank has a tight-fitting lid to minimize splashing and odors. To further aid in cleaning, the system includes an easily removable mesh filter.
CE-Approved

Features:

• Includes the L650 Duo pump and a mesh filter for easy cleaning
  
• Multiple inlet ports
  
• Handles waste water from more than one tapping point
  
• Tight fitting lid to mimimize splashing and odors
  
• Check valve on outlet
  
• Capacity 1.0 m head (13.6 V/27 V): 53 l/min - 844 GPH
  
• Capacity straight (13.6 V/27 V):61 l/min - 972 GPH
  
• Amperage: 3.4 A
  
• Fuse Size: 5 A
  
• Pump Body: Thermoplastic
  
• Shaft Seal: Lip seal
  
• Voltage: 12 V DC
  
• Intake Hoses: 1x3/4", 1x3/4" or 1x1"
  
• Discharge Hose: 3/4"

Macerator Pump TA3P10-19, 12v
The Johnson Pump brand TA3P10-19 Macerator pump takes care of the toilet waste, shredding it before it is pumped into or out from the holding tank. The pump should be connected as close as possible to the holding tank discharge outlet or the bowl discharge outlet. Note! Use unbleached lavatory paper only.
CE-Approved

Features:

• Ignition protected motor, conforming with ISO 8846 Marine
  
• Mounting bracket for easy replacement
  
• Extremely energy efficient
  
• Rotary cutter casing of PET (thermoplastic polyester)
  
• Directly connected to sewage line or holding tank
  
• Capacity at 0.2 bar (6.7 ft):37 l/min - 10 GPM
  
• Inlet Connection:11/2" (dia 38 mm) hose or 11/2"NPT
  
• Amperage: 15 A
  
• Fuse Size: 20 A
  
• Outlet Connection: 1" (25.4 mm) hose
  
• Motor: 12V DC (with built-in thermal protection)
  
• Pump Body: Phenol Plastic (PF)
  
• Impeller: Nitrile
  
• Cutter Casing: Thermoplastic Polyester (PET)
  
• Shaft: Stainless Steel
  
• Seal: Lip Seal
  
• Length: 230 mm - 9.06"
  
• Width: 108 mm - 4.25"
  
• Height: 82 mm - 3.23"
  
• Weight: 1.9 kg - 4.2 lbs

AquaT Marine Manual Toilet

The fine finish and well thought-through design of these toilets is remarkable. Made from white vitreous porcelain, and with corrosion resistant parts throughout, the Johnson Pump AquaT marine toilet, is quiet, robust and easy to clean.The AquaT toilet will give you years of trouble free operation. The manual version incorporates an ergonomically designed, hand-powered piston pump that can be mounted for either left-hand or right-hand use. When spare parts such as a new seat or valve are needed, you’ll find Johnson Pump’s global network of distributors at your service.

It’s probably fair to think of most toilets as commonplace products, but look at the features and you’re sure to see that the AquaT is far from ordinary. Quiet, hygienic and reliable, the Johnson Pump AquaT marine toilet is perfect for almost any marine toilet room.

CE-approved

Features

• Whisper quiet operation
  
• Self-priming pump
  
• Clean lines - pleasing to the eye
  
• Hygienic, easy-to-clean vitreous china bowl and exterior surfaces
  
• Robust wooden seat with durable baked enamel finish
  
• Low water consumption (2-2.5 l/flush) makes the most of holding tank capacity
  
• Versatile plumbing connection options
  
• Automatic back-flow prevention
  
• Available in comfort or compact bowl sizes
  
• Designed for virtually any onboard mounting position
  
• May be installed above or below the waterline
  
• Suitable for OEM or replacement installation
  
• Corrosion resistant materials throughout
  
• Long service life
  
• Ergonomic pump handle for ease of use
  
• Pump can be mounted left or right of the toilet bowl
  
• Innovative brake bushing prevents annoying leakage at the handle

AquaT Marine Manual Toilet

The fine finish and well thought-through design of these toilets is remarkable. Made from white vitreous porcelain, and with corrosion resistant parts throughout, the Johnson Pump AquaT marine toilet, is quiet, robust and easy to clean.The AquaT toilet will give you years of trouble free operation. The manual version incorporates an ergonomically designed, hand-powered piston pump that can be mounted for either left-hand or right-hand use. When spare parts such as a new seat or valve are needed, you’ll find Johnson Pump’s global network of distributors at your service.

It’s probably fair to think of most toilets as commonplace products, but look at the features and you’re sure to see that the AquaT is far from ordinary. Quiet, hygienic and reliable, the Johnson Pump AquaT marine toilet is perfect for almost any marine toilet room.

CE-approved

Features

• Whisper quiet operation
  
• Self-priming pump
  
• Clean lines - pleasing to the eye
  
• Hygienic, easy-to-clean vitreous china bowl and exterior surfaces
  
• Robust wooden seat with durable baked enamel finish
  
• Low water consumption (2-2.5 l/flush) makes the most of holding tank capacity
  
• Versatile plumbing connection options
  
• Automatic back-flow prevention
  
• Available in comfort or compact bowl sizes
  
• Designed for virtually any onboard mounting position
  
• May be installed above or below the waterline
  
• Suitable for OEM or replacement installation
  
• Corrosion resistant materials throughout
  
• Long service life
  
• Ergonomic pump handle for ease of use
  
• Pump can be mounted left or right of the toilet bowl
  
• Innovative brake bushing prevents annoying leakage at the handle

AquaT Marine Electric Toilet

Available in a wide variety of different versions marketed under three basic models - standard and premium electric-powered or manual - the Johnson Pump AquaT marine toilet has been designed to meet virtually every conceivable lavatory installation situation onboard.

Priced competitively, the fine finish and well thought-through design of these toilets is remarkable. Made from white vitreous porcelain, and with corrosion resistant parts throughout, the Johnson Pump AquaT marine toilet, is quiet, robust and easy to clean.
Using the Johnson Pump AquaT marine toilet, water inlet and outlet takes place in two distinct steps. First the bowl is filled with clear water, and then the waste is flushed, leaving the bowl empty and clean, with no liquids sloshing about. Naturally, automatic back-flow prevention is incorporated into the design.

Most models can be ordered with standard, bevelled or low profiles in order to fit almost any hull and bulkhead configuration, and all are available in either compact or comfort versions so you can outfit your marine lavatory with the perfect-sized toilet, no matter what the layout.
The AquaT toilet will give you years of trouble free operation. When spare parts such as a new seat or valve are needed, you’ll find Johnson Pump’s global network of distributors at your service.Power models are shipped with well-proven Aqua Jet diaphragm pumps.

It’s probably fair to think of most toilets as commonplace products, but look at the features and you’re sure to see that the AquaT is far from ordinary. Quiet, hygienic and reliable, the Johnson Pump AquaT marine toilet is perfect for almost any marine toilet room.

CE-approved

Features

• Whisper quiet operation
  
• Self-priming pump
  
• Clean lines - pleasing to the eye
  
• Hygienic, easy-to-clean vitreous china bowl and exterior surfaces
  
• Robust wooden seat with durable baked enamel finish
  
• Low water consumption (2-2.5 l/flush) makes the most of holding tank capacity
  
• Versatile plumbing connection options
  
• Automatic back-flow prevention
  
• Available in comfort or compact bowl sizes
  
• Designed for virtually any onboard mounting position
  
• May be installed above or below the waterline
  
• Suitable for OEM or replacement installation
  
• Corrosion resistant materials throughout
  
• Long service life
  
• Equipped with 12V Aqua Jet pumps
  
• Quick-connect hose or threaded connectors
  
• Complies with ISO 8846, ignition protection, and EN 55014 EMC

AquaT Marine Electric Toilet

Available in a wide variety of different versions marketed under three basic models - standard and premium electric-powered or manual - the Johnson Pump AquaT marine toilet has been designed to meet virtually every conceivable lavatory installation situation onboard.

Priced competitively, the fine finish and well thought-through design of these toilets is remarkable. Made from white vitreous porcelain, and with corrosion resistant parts throughout, the Johnson Pump AquaT marine toilet, is quiet, robust and easy to clean.
Using the Johnson Pump AquaT marine toilet, water inlet and outlet takes place in two distinct steps. First the bowl is filled with clear water, and then the waste is flushed, leaving the bowl empty and clean, with no liquids sloshing about. Naturally, automatic back-flow prevention is incorporated into the design.

Most models can be ordered with standard, bevelled or low profiles in order to fit almost any hull and bulkhead configuration, and all are available in either compact or comfort versions so you can outfit your marine lavatory with the perfect-sized toilet, no matter what the layout.
The AquaT toilet will give you years of trouble free operation. When spare parts such as a new seat or valve are needed, you’ll find Johnson Pump’s global network of distributors at your service.Power models are shipped with well-proven Aqua Jet diaphragm pumps.

It’s probably fair to think of most toilets as commonplace products, but look at the features and you’re sure to see that the AquaT is far from ordinary. Quiet, hygienic and reliable, the Johnson Pump AquaT marine toilet is perfect for almost any marine toilet room.

CE-approved

Features

• Whisper quiet operation
  
• Self-priming pump
  
• Clean lines - pleasing to the eye
  
• Hygienic, easy-to-clean vitreous china bowl and exterior surfaces
  
• Robust wooden seat with durable baked enamel finish
  
• Low water consumption (2-2.5 l/flush) makes the most of holding tank capacity
  
• Versatile plumbing connection options
  
• Automatic back-flow prevention
  
• Available in comfort or compact bowl sizes
  
• Designed for virtually any onboard mounting position
  
• May be installed above or below the waterline
  
• Suitable for OEM or replacement installation
  
• Corrosion resistant materials throughout
  
• Long service life
  
• Equipped with 12V Aqua Jet pumps
  
• Quick-connect hose or threaded connectors
  
• Complies with ISO 8846, ignition protection, and EN 55014 EMC

The Johnson Pump AquaTT marine toilet has been designed to meet virtually every conceivable lavatory installation situation onboard.

Priced competitively, the fine finish and well thought-through design of these toilets is remarkable. Made from white vitreous porcelain, and with corrosion resistant parts throughout, the Johnson Pump AquaT marine toilet, is quiet, robust and easy to clean.

Using the Johnson Pump AquaT marine toilet, water inlet and outlet takes place in two distinct steps. First the bowl is filled with clear water, and then the waste is flushed, leaving the bowl empty and clean, with no liquids sloshing about. Naturally, automatic back-flow prevention is incorporated into the design.

Most models can be ordered with standard, bevelled or low profiles in order to fit almost any hull and bulkhead configuration, and all are available in either compact or comfort versions so you can outfit your marine lavatory with the perfect-sized toilet, no matter what the layout.

The AquaT toilet will give you years of trouble free operation. When spare parts such as a new seat or valve are needed, you’ll find Johnson Pump’s global network of distributors at your service.

It’s probably fair to think of most toilets as commonplace products, but look at the features and you’re sure to see that the AquaT is far from ordinary. Quiet, hygienic and reliable, the Johnson Pump AquaT marine toilet is perfect for almost any marine toilet room.

Features:

• Whisper quiet operation
  
• Self-priming pump
  
• Clean lines - pleasing to the eye
  
• Hygienic, easy-to-clean vitreous china bowl and exterior surfaces
  
• Robust wooden seat with durable baked enamel finish
  
• Low water consumption (2-2.5 l/flush) makes the most of holding tank capacity
  
• Versatile plumbing connection options
  
• Automatic back-flow prevention
  
• Available in comfort or compact bowl sizes
  
• Designed for virtually any onboard mounting position
  
• May be installed above or below the waterline
  
• Suitable for OEM or replacement installation
  
• Corrosion resistant materials throughout
  
• Long service life
  
• Equipped with 12V Aqua Jet pumps
  
• Quick-connect hose or threaded connectors
  
• Complies with ISO 8846, ignition protection, and EN 55014 EMC

Compact toilet handling and waste water pump Viking Power Vacuum
The Viking Power Vacuum diaphragm pumps have been designed to meet the rigorous demands of the world’s leading manufacturers of boats, recreational vehicles and busses. The Viking Power Vacuum has double check-valves and can therefore also be used in vacuum toilet systems. Naturally, pumping ordinary shower or sink drain water or bilge water is no problem for either pump.

Like the Viking Power 16, this new pump has been engineered with a ball-bearing supported transmission for long service life. The pump can not only be run dry, it can also handle a mixture of air and water without difficulty. The Viking Power 32/Vacuum provides maximum flow of 32 liters per minute and is self-priming up to a height 3.5 (Vacuum) meters.

Although powered by an electric motor, this pump can also be cranked by hand in an emergency. The pump has been designed to prevent the leakage of unpleasant odors; and the Viking Power 32/Vacuum can be installed in a variety of different positions. The Viking Power 32/Vacuum is built to last, yet priced competitively.

Features

• Maximum flow 32 l/min
  
• Specifically engineered to pump black wastewater
  
• Uncompromising odor-prevention features
  
• Whisper quiet operation
  
• Self-priming
  
• High-impact glass-fiber reinforced nylon body
  
• Ball-bearing supported transmission
  
• Non-choke valves - no waste shredding required
  
• Pump head rotatable 360°
  
• Double check valves on Viking Power Vacuum
  
• Self-priming up to 2.5 meters (8.2 feet)
  
• Can be run dry and can pump air/water mixture
  
• Robust single diaphragm
  
• Electric motor with power-out, manual-crank backup
  
• Complies with ISO 15083 and small craft bilge pump
  
• Standard for vessels above 12 m (39.4 ft)

Aqua Jet Wash Down Pump Kit 3.5

Features:

• Max 13 I/min/3.5 GPM
  
• Max Pressure 70 psi / 5 bar
  
• 7.5 m / 25’ coiled hose 1/2" I.D
  
• Bulk Head fitting with Valve
  
• PUMProtector inlet strainer
  
• Spray nozzle with check vave
  
• 2-way panel switches

Aqua Jet Wash Down Kit 5.2
New 19 l/min (5.2 GPM) wash down kit conveniently includes a high capacity Aqua Jet WD 5.2, 5 bar (70 psi), PUMProtector inlet strainer, spray nozzle, bulk head fitting with valve, 7.5 meters (25’) of coiled wash down hose and an illuminated panel switch all in one package. Aqua Jet wash down pump kit makes it easy to add a wash down pump to any boat.
CE-Approved

Feaures:

• Whisper quiet operation
  
• Five-chamber construction
  
• Smooth flowing
  
• Self-priming
  
• Easy, low cost maintenance
  
• Quick-connect hose
  
• Integrated pressure switch
  
• Long service life
  
• Connection: 1/2" NPT / hose 3/4". 3/4" GHT, Hose 3/4" GHT
  
• Bulkhead fitting - Inlet 3/4" hose, outlet 3/4" GHT

Aqua Jet WD /Livewell Pump Kit 5.2

Aqua Jetwash down/livewell pump kit makes it easy to add a wash down and livewell pump to any boat.
CE-Approved

Features:

• 5.2 GPM / 20 I/min Wash Down Pump
  
• Max Pressure 70 psi / 5 bar
  
• 7.5 m / 25’ coiled hose 1/2" I.D
  
• Bulk Head fitting with Valve
  
• PUMProtector inlet strainer
  
• Spray nozzle with check vave
  
• 2-way panel switches
  
• 550 GPH Twin Port Live Well Pump
  
• Spray Bar
  
• Dura Port Fittings

Aqua Jet Wash Down Pumps
The new generation of wash down pumps - 12V DC. Quiet and pulsation-free, the new Aqua Jet five-chamber diaphragm pump from SPX Johnson Pump provides the perfect deckwash solution for both small and medium sized leisure and commercial boats. With a pressure of 5 bar, clean-up is faster and easier than ever before.
As a wash down pump, the Aqua Jet offers much higher pressures than competitive models, making clean-up faster and easier than ever before.
Complete with trigger nozzle, PUMProtector inlet strainer and hose connections for 1/2" hose. Both BSP and NPTconnections included in package.
CE-Approved

Features:

• Whisper quiet operation
  
• Five-chamber construction
  
• Self-priming
  
• Easy, low cost maintenance
  
• Quick-connect hose or threaded connectors available
  
• Inline strainer and trigger nozzle included as standard
  
• Long service life
  
• Capacity:11 l/min - 2.9 GPM
  
• Pressure Cut Off: 2.8 bar - 41 psi
  
• Fuse Size: 10 A
  
• Connection:3/8" BSP x +" barb / +" NPT x ?" barb
  
• Motor: WD 2.9 - 90 W, 12/24V DC
  
• Body: PA/PPA
  
• Valves: Nitrile
  
• Diaphragm: Santoprene

Aqua Jet Wash Down Pumps
The new generation of wash down pumps - 12V DC. Quiet and pulsation-free, the new Aqua Jet five-chamber diaphragm pump from SPX Johnson Pump provides the perfect deckwash solution for both small and medium sized leisure and commercial boats. With a pressure of 5 bar, clean-up is faster and easier than ever before.
As a wash down pump, the Aqua Jet offers much higher pressures than competitive models, making clean-up faster and easier than ever before.
Complete with trigger nozzle, PUMProtector inlet strainer and hose connections for 1/2" hose. Both BSP and NPTconnections included in package.
CE-Approved

Features:

• Whisper quiet operation
  
• Five-chamber construction
  
• Self-priming
  
• Easy, low cost maintenance
  
• Quick-connect hose or threaded connectors available
  
• Inline strainer and trigger nozzle included as standard
  
• Long service life
  
• Capacity:13 l/min - 3.5 GPM
  
• Pressure Cut Off: 5 bar - 70 psi
  
• Fuse Size: 15 A
  
• Connection:1/2" NPT / hose 3/4", GHT 3/4" ; 3/8" BSP x 1/2" barb,
  
• Motor: WD 3.5 - 120 W, 12/24V DC
  
• Body: PA/PPA
  
• Valves: Nitrile
  
• Diaphragm: Santoprene

Aqua Jet Wash Down Pumps
The new generation of wash down pumps - 12V DC. Quiet and pulsation-free, the new Aqua Jet five-chamber diaphragm pump from SPX Johnson Pump provides the perfect deckwash solution for both small and medium sized leisure and commercial boats. With a pressure of 5 bar, clean-up is faster and easier than ever before.
As a wash down pump, the Aqua Jet offers much higher pressures than competitive models, making clean-up faster and easier than ever before.
Complete with trigger nozzle, PUMProtector inlet strainer and hose connections for 1/2" hose. Both BSP and NPTconnections included in package.
CE-Approved

Features:

• Whisper quiet operation
  
• Five-chamber construction
  
• Self-priming
  
• Easy, low cost maintenance
  
• Quick-connect hose or threaded connectors available
  
• Inline strainer and trigger nozzle included as standard
  
• Long service life
  
• Capacity:20 l/min - 5.2 GPM
  
• Pressure Cut Off: 5 bar - 70 psi
  
• Fuse Size: 20 A
  
• Connection:1/2" NPT / hose 3/4", GHT 3/4" ; 3/8" BSP x 1/2" barb,
  
• Motor: WD 5.2 - 185 W, 12/24V DC
  
• Body: PA/PPA
  
• Valves: Nitrile
  
• Diaphragm: Santoprene

Aqua Jet Flow Master 5.0 WPS
The ideal choice for pressurizing water in a closed system. The digital controller adjusts water flow asthe demand is increased and decreased while maintaining a very smooth flow. The unique variable flowfeature of the Flow Master pump allows the pump to be mounted without an accumulator tank and still maintain an even flow regardless if one or multiple taps are being used.

Features:

• Capacity: 19 l/min - 5 GPM
  
• Pressure Cut Off: 3.5 bar - 50 psi
  
• Fuze Size: 15 A
  
• Connection:3/8" NPT / hose 1/2"; 1/2" NPT / hose 3/4"; 1/2" NPT 3/4" hose 1/2 CTS
  
• Dimensions: 239 mm/9.4" long x 209 mm/8.22" wide x 113 mm/4.49" high
  
• Weight: 2 kg/4.5 lbs
  
• Motor: WPS 5.0 - 150 W, 12/24V DC (with built-in thermal protection)
  
• Body: Nylon/Polypropylene
  
• Valves: Santoprene/EPDM
  
• Diaphragm: Santoprene

CM90 Circulation Pump

The CM90 circulation pump has been developed primarily for heating and cooling applications inbusses, trains and boats, but it is much more. In closed systems or wherever else self-priming is notrequired, the CM90 is an all-round pump that distinguishes itself for its dependability, capacity andlong service life.
The CM90 pump has a magnetic drive, which means that no shaft seal is necessary, as the motor shaft does not penetrate the pump house. With no mechanical seal, longer service life is assured. Heat flanges on both the motor and the pump also increase service life as they dissipate heat from the unit, which can pump liquids efficiently at a very wide range of temperatures. The CM90 also features integral thermal overload protection and is EMC approved according to EN 55014 standards.
The CM90 magnetic driven centrifugal pump combines a high flow rate with very low electricity consumption, making it ideal for vehicular heating and cooling systems.

Features & Benefits

• Maximum flow of 65 or 115 litres per minute @ 0.1 bar
  
• Designed for liquid temperatures of -40°C to +100°C
  
• Seal-less magnetic drive
  
• Specifically engineered for continuous operation
  
• Extended service life
  
• Ball bearing brush motor - Enclosure IP67
  
• Equipped with heat flanges for improved cooling
  
• Steel motor housing
  
• 12V
  
• Thermal overload protection
  
• Universal mounting bracket
  
• Industry standard ports
  
• Complies with ISO 8846 and EN 55014 standards

Insta-Lube Oil Changer
Easy, Quick, No-Mess, No-Hassle Oil Change Package

• Reliable, well designed & proven gear pump technology
  
• For marine or industrial applications
  
• Portable & convenient
  
• High temperature resistant dipstick tube
  
• Heavy-duty alligator clips easily clamp directly onto battery
  
• Use the easy pour spout to empty used oil in recycling container
  
• 12 Volt
  
• 1 Year Warranty

• Pail
  
• Sealed Lid
  
• Pump Assembly
  
• Dipstick tube
  
• Heavy Duty Alligator Clips
  
• Easy Pour Spout

Impeller Kit
Part #: 09-801B

Specifications

Electro Magnetic Float Switch
Part #: 36252

Compact mechanical switch offers a combination of reliable solid state electronics and a sealed float switch. False start prevention, no mercury, high impact plastic and encapsulated electronics adds up to dependability. Activates pump at 2" water level, deactivates pump at 3/4" water level.

Features:

• Type - Electronic
  
• Volts - 24VDC
  
• Max. Amps - 8

Deck Wash 316 Stainless Flush Mount
Part #: 61121

316 SS construction. Connects & disconnects under full pressure. Positive lock bayonet connector. Double Viton O-ring seals. Large flow capacity. 20%
nylon 66 connectors. American standard garden hose.

Features:

• Flush mount
  
• Connects and disconnects under full pressure
  
• Positive lock bayonet connector
  
• Double viton o-ring seals
  
• Large flow capacity
  
• 316 stainless steel
  
• Connections made of Nylon 66
  
• Single outlet, single flush