Stereo Weather Enclosure - White
Part Number: WC-400W

Install virtually any auto or marine stereo on your boat without fear of damage from moisture, corrosion or UV rays. The WC400 is waterproof housing that surrounds your stereo on all sides for maximum protection. A gasket-sealed, polycarbonate splash cover on the front of the rugged ABS enclosure prevents water from entering. The hinged cover lifts easily and remains out of the way in any of several positions. When open, it maintains partial splash protection while still allowing access to stereo controls. Wires and a rear connector let you hook up the stereo and antenna through the housing. A gimbal mounting bracket permits installation above or below the dash, under an electronic box or on any convenient horizontal surface.

Features

• Accommodates any dual post, removable and DIN-style stereos
  
• High Impact ABS Housing
  
• Plastic Bracket
  
• Dash or Overhead Mounting
  
• Mounting Hardware Included
  
• Available in Black or White

Stereo Enclosures Housing
Part Number: WC-700

WC-700 is waterproof stereo housing with two 3" built-in marine speakers. This housing allows the convenient mounting of a stereo or CD player without the need for remotely mounted speakers. It is ideal for small boat applications or where space is limited. Gasketed cover designed to keep moisture away from your stereo. Accommodates dual post, removable and DIN-style stereos.

Features

• Two 3" fill range waterproof speakers
  
• UV stabilized plastic housing
  
• Flip-up translucent polycarbonate front panel
  
• Two applications for DIN type and shaft type radio/CD player
  
• Can be installed near driver’s seat for easy control
  
• Easy mounting design - great for small boat applications
  
• Stainless Steel Screws
  
• EVA Gasket included
  
• Meets or Exceeds 600hrs ASTM UV & Salt Spray Test

MP3 /iPod/ Satellite Radio Adapter
Part Number: IC-3.5PM

The IC-3.5PM allows you to connect your MP3 player, iPod® or satellite radio to any audio device with RCA inputs. It features a waterproof panel/dash mount with rubber cover and a 4’ extension cable. Also included is a 4’ patch cord for connecting MP3 player to adapter plug.

Features

• Dashboard / panel mount waterproof female 3.5mm stereo jack.
  
• 4’ long extension cable with RCA plugs.
  
• Rubber Plug keeps water out when not in use.
  
• Can be installed on panels up to 1.25" thick.
  
• 4’ long 3.5mm to 3.5mm stereo headphone jack extension cord included.
  
• Easily installed with commonly available ¾" paddle drill bit.
  
• Can be used as remote headphone jack.
  
• Also available in white color adapter (Part# IC3.5PM W)

Stereo Weather Enclosure - Black
Part Number: WC-400B

Install virtually any auto or marine stereo on your boat without fear of damage from moisture, corrosion or UV rays. The WC400 is waterproof housing that surrounds your stereo on all sides for maximum protection. A gasket-sealed, polycarbonate splash cover on the front of the rugged ABS enclosure prevents water from entering. The hinged cover lifts easily and remains out of the way in any of several positions. When open, it maintains partial splash protection while still allowing access to stereo controls. Wires and a rear connector let you hook up the stereo and antenna through the housing. A gimbal mounting bracket permits installation above or below the dash, under an electronic box or on any convenient horizontal surface.

Features

• Accommodates any dual post, removable and DIN-style stereos
  
• High Impact ABS Housing
  
• Plastic Bracket
  
• Dash or Overhead Mounting
  
• Mounting Hardware Included
  
• Available in Black or White

Gimbal Mount for MRD80/MRD80i Stereo
Part Number: GM-MRD80

GM-MRD80 is a gimbal mount bracket that allow your MRD80/MRD80i unit to mount anywhere from top to bottom. With the gimbal mount, no covers or additional mounting boxes are required for installation. Available in black only.

Class D Power Amplifier
Part Number: ME-400D

The ME-400D Class D Power Amplifier provides 500 watts (125W x 4 CH) of crisp, clean audio power. This amplifier can be easily configured to enhance your listening pleasure. Gold plated connections resist corrosion. Efficient heat sink design ensures uninterrupted operation. The ME-400D will be an outstanding addition to your vessel’s audio system.

Features

• 4 Channel Class D Power Amp
  
• 2 ohm stable stereo outputs
  
• Bridgeable outputs
  
• Variable input level controls for each pair of channels
  
• Variable High-pass, Low-pass and All-pass crossover
  
• Variable Bass Boost circuit
  
• Thermal and overload protection circuitry
  
• Gold-plated RCA jacks and terminals

4 Channel,120watt, Audio Amplifier with volume control
Part Number: ME60

The ME60 is a four channel 120 Watts RMS audio amplifier of delivering up to 30W RMS per channel. It has a compact, water resistant design that allows for flexible mounting possibilities, and makes it simple to expand the audio system capabilities for any installation.

Uses:

• To add additional loudspeakers to a current audio system
  
• To provide amplification for a separate audio zone
  
• As a stand-alone system amplifier for any audio source
  
• To power standard speakers or speakers and subwoofer

• Powers up to (8) 4ohm speakers
  
• Internal distortion limiting circuits
  
• Dedicated gain level control
  
• External volume control with ON/OFF switch included
  
• Water resistant design for marine use
  
• Rear channels switchable from full range to powered sub out.

ME52 Amp with MA4055 Speaker and IC3.5 Panel Mount Adapter
Part Number: MP3-KIT_A

MP3-Kit-A is a combo kit. The kit includes ME-52 50 watt waterproof amplifier with separate panel mount waterproof volume control knob, IC3.5-PM panel mount 3.5mm MP3 adapter for iPod® or other MP3 player and a pair of MA4055 5" coaxial waterproof speakers. MP3-Kit-A provides the ability to have stereo sound on small watercraft such as Jet Skis, inflatable?s or tenders. Also a perfect solution for off road vehicles, motorcycles, ATV?s and golf carts. Easily installed where space is a premium. The ME-52 amplifier can be mounted underneath a seat or inside the boat?s structure. The IC3.5-PM MP3 adapter and Volume Control can be mounted on the dash or inside the stowage compartment. This provides a convenient input for portable MP3 or CD players. And with the included Poly-Planar Waterproof Speakers, you?ll have crisp, clear stereo sound on the go!

Features

• Kit Includes: ME-52 50watt waterproof Amplifier with separate panel mount waterproof volume control
  
• Kit Includes: IC3.5-PM Panel mount 3.5mm MP3 adapter for iPod? or other MP3 players
  
• Kit Includes: MA-4055 5" coaxial waterproof speakers with speaker wires included
  
• The speakers can be changed to black color speaker (Part# MP3-KIT_AB when you order the kit with black color speaker)

6" Dual Cone Integral Grill Speaker
Part Number: MA-4600

MA-4600 is a dual cone speaker. This speaker featured a rugged waterproof design, teflon-coated wires, plastic grills, polypropylene cones, mylar tweeters and plastic frames, to provide years of trouble-free service. Ultra-low magnetic field speakers eliminates the problem of speakers magnets affecting navigation equipment such as compasses and autopilots. Peak power handling capability 80 watts/pair. Available in white only.

• Coated internal wiring for long life
  
• UV stabilized plastic grilles
  
• polypropylene cones
  
• Heavy Duty ABS Plastic frames
  
• Low Magnetic Field does not interfere with compass and autopilot

10" Round Flush-mount Subwoofer
Part Number: MS-150

This 10" round waterproof flush-mount subwoofer designed to complement your marine audio system by providing heavy-duty response with up to 150W RMS. The MS-150’s corrosion-proof construction features a polypropylene cone with TPU surround for a long life in the marine environment. Easy to install, even in difficult locations, either from behind or in front of the cutout.

• Waterproof and corrosion-proof
  
• Coated internal wiring for long life
  
• polypropylene cone and mylar tweeter
  
• Stainless Steel Grille stand up to harsh marine effects
  
• Heavy Duty ABS Plastic frames

• Power Handling: 150W Rated, 300W Max
  
• Frequency Response: 40Hz to 4Khz
  
• Overall Diameter: 12-¹¹⁄₁₆" (321mm)
  
• Cutout Diameter: 9-¹⁄₁₆" (230mm)
  
• Mounting Depth: 4-⅝" (116mm)

VHF Extension Speakers Flush Mount
Part Number: MA-1000R

This thin, dual cone waterproof communications speaker with 20 watts of power is ideal for use as a VHF remote. Designed for flush mounting, it fits into a 4-¼ diameter cutout. Comes equipped with a mini-plug.

Features

• Completely waterproof and corrosion-proof
  
• Features stainless steel grills, sturdy plastic frames, polypropylene speaker cones and teflon-coated wires
  
• deal for use as a VHF remote
  
• Available in black or white color speaker

• Peak Power: 20W Each
  
• Speaker Impedance: 4 ohms
  
• Cutout Diameter: 4-⅜" (110mm)
  
• Overall Diameter: 5-¹⁵⁄₁₆" (151mm)
  
• Mounting Depth: 1-⅝" (41mm)
  
• Per Unit Weight: 0.65 lbs

4" 2 Way Coax - Integral Grill Speaker
Part Number: MA-4054

MA-4054 is a 4" cone size two-way coaxial speaker. This speaker featured a rugged waterproof design, teflon-coated wires, plastic grills, polypropylene cones, mylar tweeters and plastic frames, to provide years of trouble-free service. Ultra-low magnetic field speakers eliminates the problem of speakers magnets affecting navigation equipment such as compasses and autopilots. Peak power handling capability 80W/pair

Features

• Ultra-low magnetic field speaker
  
• Ideal replacement speakers for boaters who want to upgrade to waterproof speakers without changing the cutout size
  
• Integral grills allow for simple, one-piece installation
  
• Stainless steel mounting harware included
  
• Available in Black and White color speaker

• Frequency response: 65Hz to 20KHZ (2 way)
  
• SPL: 87dB
  
• Type: 2-way Coaxial
  
• Cone Size: 4" (102mm)
  
• Speaker Impedance: 4 ohms
  
• Peak Power: 80 watts per pair
  
• Continuous Power: 40 watts RMS/pair
  
• Weight: 1.2 lbs per unit weight
  
• Outside Diameter: 5-¼" (132mm)
  
• Cutout Diameter: 4-¹⁄₁₆" (102mm)
  
• Mounting Depth: 2-⅛" (54mm)

5" 2 Way Coax - Integral Grill Speaker
Part Number: MA-4055

MA-4055 is a 5" cone size two-way coaxial speaker. This speaker featured a rugged waterproof design, teflon-coated wires, plastic grills, polypropylene cones, mylar tweeters and plastic frames, to provide years of trouble-free service. Ultra-low magnetic field speakers eliminates the problem of speakers magnets affecting navigation equipment such as compasses and autopilots. Peak power handling capability 80 watts/pair

Features

• Ultra-low magnetic field speaker
  
• Ideal replacement speakers for boaters who want to upgrade to waterproof speakers without changing the cutout size
  
• Integral grills allow for simple, one-piece installation
  
• Stainless steel mounting harware included
  
• Available in Black and White color speaker

• Frequency response: 60Hz to 20KHz (2 way)
  
• SPL: 89dB
  
• Type: 2-way Coaxial
  
• Cone Size: 5" (127mm)
  
• Speaker Impedance: 4 ohms
  
• Peak Power: 80W per pair
  
• Continuous Power: 40W RMS/pair
  
• Weight: 1.20 lbs per unit weight
  
• Outside Diameter: 5-¹⁵⁄₁₆" (150mm)
  
• Cutout Diameter: 4-⁷⁄₁₆" (112mm)
  
• Mounting Depth: 2-¼" (56mm)

5" 2 Way Coax - Integral Grill Speaker
Part Number: MA-4055

MA-4055 is a 5" cone size two-way coaxial speaker. This speaker featured a rugged waterproof design, teflon-coated wires, plastic grills, polypropylene cones, mylar tweeters and plastic frames, to provide years of trouble-free service. Ultra-low magnetic field speakers eliminates the problem of speakers magnets affecting navigation equipment such as compasses and autopilots. Peak power handling capability 80 watts/pair

Features

• Ultra-low magnetic field speaker
  
• Ideal replacement speakers for boaters who want to upgrade to waterproof speakers without changing the cutout size
  
• Integral grills allow for simple, one-piece installation
  
• Stainless steel mounting harware included
  
• Available in Black and White color speaker

• Frequency response: 60Hz to 20KHz (2 way)
  
• SPL: 89dB
  
• Type: 2-way Coaxial
  
• Cone Size: 5" (127mm)
  
• Speaker Impedance: 4 ohms
  
• Peak Power: 80W per pair
  
• Continuous Power: 40W RMS/pair
  
• Weight: 1.20 lbs per unit weight
  
• Outside Diameter: 5-¹⁵⁄₁₆" (150mm)
  
• Cutout Diameter: 4-⁷⁄₁₆" (112mm)
  
• Mounting Depth: 2-¼" (56mm)

6" 2-Way Coax - Integral Grill Speaker - White
Part Number:MA4056

MA-4056 is a 6" cone size two-way coaxial speaker. This speaker featured a rugged waterproof design, teflon-coated wires, plastic grills, polypropylene cones, mylar tweeters and plastic frames, to provide years of trouble-free service. Ultra-low magnetic field speakers eliminates the problem of speakers magnets affecting navigation equipment such as compasses and autopilots. Peak power handling capability 80 watts/pair

Features

• Ultra-low magnetic field speaker
  
• Ideal replacement speakers for boaters who want to upgrade to waterproof speakers without changing the cutout size
  
• Integral grills allow for simple, one-piece installation
  
• Stainless steel mounting harware included
  
• Available in Black and White color speaker

6" 2-Way Coax - Integral Grill Speaker - Black
Part Number:MA4056

MA-4056 is a 6" cone size two-way coaxial speaker. This speaker featured a rugged waterproof design, teflon-coated wires, plastic grills, polypropylene cones, mylar tweeters and plastic frames, to provide years of trouble-free service. Ultra-low magnetic field speakers eliminates the problem of speakers magnets affecting navigation equipment such as compasses and autopilots. Peak power handling capability 80 watts/pair

Features

• Ultra-low magnetic field speaker
  
• Ideal replacement speakers for boaters who want to upgrade to waterproof speakers without changing the cutout size
  
• Integral grills allow for simple, one-piece installation
  
• Stainless steel mounting harware included
  
• Available in Black and White color speaker

3-way Platinum Panel
Part Number: MA-5500

Low magnetic field. These low magnetic field three-way speakers have a unique dual woofer design that handles up to 280W/pair. The perfect upgrade for the popular Slim Line Speakers.

Features

• Colorfast plastic frame withstands UV rays
  
• Low-magnetic design
  
• Waterproof design
  
• Rugged powder coated stainless steel grill
  
• 3-way design with mylar tweeter and midrange
  
• Available in White only

5-¼" Platinum Round
Part Number: MA-6500

High power, multi-component, round speaker with a clean, contemporary design high power unit in a 5-¼" round two-way speaker. A 1" tweeter is mounted across the main cone. Flush mount. MA-6500 are 320W/ pair.

Features

• Colorfast plastic frame withstands UV rays
  
• Waterproof design
  
• Rugged powder coated stainless steel grill
  
• 2-way design with mylar tweeter and midrange
  
• Available in White only

6-½" Platinum Round
Part Number: MA-6600

High power, multi-component, round speaker with a clean low profile and a full range of audio performance. Get deep, rich sound from a 6-½ two-way speaker with a 1" tweeter. Flush mount. MA-6600 are 400W/pair.

Features

• Waterproof and corrosion proof
  
• Colorfast plastic frame withstands UV rays
  
• Rugged powder coated stainless steel grill
  
• Meets or exceeds ASTM UV and salt spray tests
  
• Lead wires and stainless stell mounting hardware included
  
• Available in white only

8" Platinum Round
Part Number: MA-6800

High power, multi-component, round speaker, with an 8" woofer, a mid range and tweeter, is tailored for listeners who appreciates a crisp, full sound. Flush mount. MA-6800 are 400W/pair.

Features

• Colorfast plastic frame withstands UV rays
  
• Waterproof design
  
• Rugged powder coated stainless steel grill
  
• 3-way design with mylar tweeter and midrange
  
• Available in White only

• Peak Power: 400W/pair
  
• Speaker Impedance: 4 ohm
  
• Weight (each): 4.05lb
  
• Mounting Depth: 3-⁷⁄₁₆" (87mm)
  
• Outside Grill: 9-¼" (235mm)
  
• Cutout: 7-½" (190mm)
  
• Frequency Response: 48Hz to 20KHz (3 way)
  
• SPL: 89dB
  
• Cone Size: 8" (203mm)
  
• Continuous Power: 100 W RMS/Speaker

Compact Box Speaker - White
Part Number: MA-800

Compact, two-way speakers feature a vented port and bass reflex design to produce a full range of sound. The compact design allows for easy mounting without cutting holes, using the 360° gimbal mounting brackets. Stainless steel grills, polypropylene cones, heavy-duty ABS housings and a non-corroding mounting brackets assure you of long-lasting waterproof and corrosion-proof performance.

Features

• Low magnetic field
  
• Two-way bass reflex box speakers
  
• Stainless steel gimbal bracket included
  
• Available in black and white

• Frequency Response: 60Hz to 20KHz (2 way)
  
• Peak Power: 100W per pair
  
• Impedance: 4 ohms
  
• Overall Dimensions: 7-½" x 4-¹⁵⁄₁₆" x 4-¹⁵⁄₁₆" (190mm x 125mm x 125mm)
  
• Weight: 3.75 lbs per Speaker

5" Platinum Panel - Black
Part Number: MA-905

Big Sound from Small Speakers! The MA-905 panel speakers feature a shallow 1" mounting depth for those tight places. These two-way panel speakers have a 5" long throw woofer and a 1" mylar tweeter. Each speaker handles peak power of 200W. Available in black and white.

Features

• Available in Black and White
  
• Shallow 1" mounting depth
  
• two-way speaker

5" Platinum Panel - White
Part Number: MA-905

Big Sound from Small Speakers! The MA-905 panel speakers feature a shallow 1" mounting depth for those tight places. These two-way panel speakers have a 5" long throw woofer and a 1" mylar tweeter. Each speaker handles peak power of 200W. Available in black and white.

Features

• Available in Black and White
  
• Shallow 1" mounting depth
  
• two-way speaker

VHF Extension Speakers Surface Mount
Part Number: MB-21W

This compact marine communications speaker includes a stainless steel mounting bracket and stainless steel grill. 8 watts Maximum handling power. Comes equipped with a 10’ lead wire and mini-plug. These waterproof communication speakers can be mounted where you can hear your VHF radiotelephone.

Features

• Completely waterproof and corrosion-proof
  
• Features stainless steel grills, sturdy plastic frames, polypropylene speaker cones and teflon-coated wires
  
• Ideal for use as a VHF remote
  
• Available in black or white color speaker

VHF Extension Speakers Surface Mount
Part Number: MB-21B

This compact marine communications speaker includes a stainless steel mounting bracket and stainless steel grill. 8 watts Maximum handling power. Comes equipped with a 10’ lead wire and mini-plug. These waterproof communication speakers can be mounted where you can hear your VHF radiotelephone.

Features

• Completely waterproof and corrosion-proof
  
• Features stainless steel grills, sturdy plastic frames, polypropylene speaker cones and teflon-coated wires
  
• Ideal for use as a VHF remote
  
• Available in black or white color speaker

VHF Extension Speakers Surface Mount
Part Number: MB-41W

A stand-alone 4" VHF extension speaker that’s completely waterproof, with stainless steel grill and mounting bracket, ABS housing and polypropylene cone. 10W Maximum Power Handling. Comes equipped with a 10’ lead wire and mini-plug.

Features

• Completely waterproof and corrosion-proof
  
• Features stainless steel grills, sturdy plastic frames, polypropylene speaker cones and teflon-coated wires
  
• Ideal for use as a VHF remote
  
• Available in black or white color speaker

• Peak Power Handling: 20W/pair
  
• Speaker Impedance: 4 ohm
  
• Frequency Range: 1K to 10K Hz
  
• Weight: 1.05 lbs per Speaker
  
• SPL: 83 dB+/-3 dB
  
• Overall Dimensions: 2-¹⁵⁄₁₆" x 2-¾’" x 1-⁵⁄₁₆" (74mm x 69mm x 33mm)

VHF Extension Speakers Surface Mount
Part Number: MB-41B

A stand-alone 4" VHF extension speaker that’s completely waterproof, with stainless steel grill and mounting bracket, ABS housing and polypropylene cone. 10W Maximum Power Handling. Comes equipped with a 10’ lead wire and mini-plug.

Features

• Completely waterproof and corrosion-proof
  
• Features stainless steel grills, sturdy plastic frames, polypropylene speaker cones and teflon-coated wires
  
• Ideal for use as a VHF remote
  
• Available in black or white color speaker

• Peak Power Handling: 20W/pair
  
• Speaker Impedance: 4 ohm
  
• Frequency Range: 1K to 10K Hz
  
• Weight: 1.05 lbs per Speaker
  
• SPL: 83 dB+/-3 dB
  
• Overall Dimensions: 2-¹⁵⁄₁₆" x 2-¾’" x 1-⁵⁄₁₆" (74mm x 69mm x 33mm)

Box Speakers
Part Number: MA-9060B

Full size box speakers with a two-way vented post design offer full range response. The low magnetic field design lets you mount them anywhere. Polycarbonate gimbal mounting brackets are included. The 5.25" polypropylene main cones provide maximum power of 100 watts per speaker.

Features

• Low magnetic field speaker
  
• Full range, bass reflex box speakers offer top quality sound
  
• Gimbal mounting bracket included
  
• Optional pivot mounting kit available
  
• Available in black and white

• Frequency Response: 55Hz to 20KHz (2 way)
  
• Peak Power: 100W per speaker
  
• Impedance: 4 ohms
  
• Overall Dimensions: 9-¹⁄₁₆" x 6-¹⁄₁₆" 5-⅝" (230mm x 153mm x 143mm)
  
• Weight: 4.80 lbs per Speaker
  
• Cone Size: 5-¼" (133mm)
  
• Continuous Power: 60W RMS/speaker
  
• SPL: 86dB

Subcompact Box Speakers
Part Number: MA-840W

These subcompact box speakers are designed to fit in difficult locations and still offer high quality music sound. The ultra-low magnetic field design lets you mount them anywhere without adversely affecting navigation equipment such as compasses and autopilots. Polypropylene cones, stainless steel grills and brackets, and heavy-duty ABS enclosures make them corrosion-proof and waterproof. Dual cone design with 3" main cone size.

Features

• Ideal for locations where other speakers won’t fit
  
• Only 4" x 4"
  
• Ultra-low magnetic field speaker
  
• Stainless steel grill and bracket
  
• Available in black and white

6" Premium Panel
Part Number: MA-7060

Contemporary design. These 6" speakers offer superior sound quality and an easy, low profile mount designed to complement the decor of even the finest yachts. These full range, two-way speakers mount very flush with a minimum protrusion. Grills cover the mounting screws for a clean, professionally-mounted appearance. No holes are required for the mounting screws, and it is not necessary to access the rear of the mounting surface. The self-contained clamps automatically grip the inside of the mounting surface.

Features

• Waterproof construction throughout
  
• Corrosion proof powder coated stainless steel grill
  
• Plastic frame with UV stabilizer
  
• Polypropylene cone
  
• Coated terminal/voice coil wires
  
• Easy mounting
  
• Available in white only

VHF Extension Speakers Flush Mount
Part Number: MA-1000R

This thin, dual cone waterproof communications speaker with 20 watts of power is ideal for use as a VHF remote. Designed for flush mounting, it fits into a 4-¼ diameter cutout. Comes equipped with a mini-plug.

Features

• Completely waterproof and corrosion-proof
  
• Features stainless steel grills, sturdy plastic frames, polypropylene speaker cones and teflon-coated wires
  
• deal for use as a VHF remote
  
• Available in black or white color speaker

• Peak Power: 20W Each
  
• Speaker Impedance: 4 ohms
  
• Cutout Diameter: 4-⅜" (110mm)
  
• Overall Diameter: 5-¹⁵⁄₁₆" (151mm)
  
• Mounting Depth: 1-⅝" (41mm)
  
• Per Unit Weight: 0.65 lbs

4" 2 Way Coax - Integral Grill Speaker
Part Number: MA-4054

MA-4054 is a 4" cone size two-way coaxial speaker. This speaker featured a rugged waterproof design, teflon-coated wires, plastic grills, polypropylene cones, mylar tweeters and plastic frames, to provide years of trouble-free service. Ultra-low magnetic field speakers eliminates the problem of speakers magnets affecting navigation equipment such as compasses and autopilots. Peak power handling capability 80W/pair

Features

• Ultra-low magnetic field speaker
  
• Ideal replacement speakers for boaters who want to upgrade to waterproof speakers without changing the cutout size
  
• Integral grills allow for simple, one-piece installation
  
• Stainless steel mounting harware included
  
• Available in Black and White color speaker

• Frequency response: 65Hz to 20KHZ (2 way)
  
• SPL: 87dB
  
• Type: 2-way Coaxial
  
• Cone Size: 4" (102mm)
  
• Speaker Impedance: 4 ohms
  
• Peak Power: 80 watts per pair
  
• Continuous Power: 40 watts RMS/pair
  
• Weight: 1.2 lbs per unit weight
  
• Outside Diameter: 5-¼" (132mm)
  
• Cutout Diameter: 4-¹⁄₁₆" (102mm)
  
• Mounting Depth: 2-⅛" (54mm)

Compact Box Speaker - Black
Part Number: MA-800

Compact, two-way speakers feature a vented port and bass reflex design to produce a full range of sound. The compact design allows for easy mounting without cutting holes, using the 360° gimbal mounting brackets. Stainless steel grills, polypropylene cones, heavy-duty ABS housings and a non-corroding mounting brackets assure you of long-lasting waterproof and corrosion-proof performance.

Features

• Low magnetic field
  
• Two-way bass reflex box speakers
  
• Stainless steel gimbal bracket included
  
• Available in black and white

• Frequency Response: 60Hz to 20KHz (2 way)
  
• Peak Power: 100W per pair
  
• Impedance: 4 ohms
  
• Overall Dimensions: 7-½" x 4-¹⁵⁄₁₆" x 4-¹⁵⁄₁₆" (190mm x 125mm x 125mm)
  
• Weight: 3.75 lbs per Speaker

6" x 9" Platinum Oval
Part Number: MA-6900

Performance advantage. The MA-6900 three-way speaker is designed to deliver your favorite music with a peak power capability of 400W/pair.

Features

• Available in White only
  
• 3-way design with mylar tweeter & midrange
  
• Rugged powder coated stainless steel grill
  
• Waterproof design
  
• Colorfast plastic frame withstands UV rays

• Peak Power: 400W/pair
  
• Continuous Power: 100W RMS/speaker
  
• Speaker Impedance: 4 ohm
  
• Weight (each): 6.75lb
  
• Mounting Depth: 3-⁵⁄₁₆" (83mm)
  
• Outside Grill: 10-⁵⁄₁₆" x 7-¾" (262mm x 196mm)
  
• Cutout: 8-½" x6-¹⁄₁₆" (215mm x 154mm)
  
• Frequency Response: 49Hz to 20KHz (3 way)
  
• SPL: 88dB
  
• Cone Size: 6" x 9" (152mm x 229mm)

5-¼" Premium Enclosed Flush
Part Number: MA-1610

MA1610 is a Low Magnetic Field speaker and is a two-way speaker that can be used as a freestanding enclosed speaker, or the back cover may be removed for flush mounting. Peak power 140W/pair.

Features

• Low magnetic field speaker
  
• Can be used as a freestanding enclosed speaker or flush mount
  
• Available in white color only

• Cone Size: 5-½" (133mm)
  
• Peak Power: 70W per speaker
  
• Continuous Power: 35W RMS/speaker
  
• Speaker Impedance: 4 ohms
  
• Overall Dimension: 6-⅝" x 6-⅝" (167mm x 167mm)
  
• Per Unit Weight: 1.95 lbs

Pivot Mount
Part Number: M-1

M1 Pivot Mount brackets are designed to allow maximum mounting versatility for Poly-Planar® box speakers (MA-9060, MA-800, MA-7500 and MA-1610) and other popular name box speakers. Since all speakers are directional, M1 brackets allow you to point your speakers in whatever direction produces the best sound quality for the location, whether you’re in a small cabin or on the upper deck of a luxury yacht. The brackets also perform exceptionally well when mounted in marinas, restaurants or backyards.

Features

Box Speakers
Part Number: MA-9060W

Full size box speakers with a two-way vented post design offer full range response. The low magnetic field design lets you mount them anywhere. Polycarbonate gimbal mounting brackets are included. The 5.25" polypropylene main cones provide maximum power of 100 watts per speaker.

Features

• Low magnetic field speaker
  
• Full range, bass reflex box speakers offer top quality sound
  
• Gimbal mounting bracket included
  
• Optional pivot mounting kit available
  
• Available in black and white

• Frequency Response: 55Hz to 20KHz (2 way)
  
• Peak Power: 100W per speaker
  
• Impedance: 4 ohms
  
• Overall Dimensions: 9-¹⁄₁₆" x 6-¹⁄₁₆" 5-⅝" (230mm x 153mm x 143mm)
  
• Weight: 4.80 lbs per Speaker
  
• Cone Size: 5-¼" (133mm)
  
• Continuous Power: 60W RMS/speaker
  
• SPL: 86dB

Compact Box Speakers
Part Number: MA-7500W

The MA-7500 offers good sound in those locations where the MA-9060 will not fit. These compact, concert hall-quality box speakers are designed to deliver top quality sound on your boat, where space is always at a premium. Contemporary styling complements any cabin, whether freestanding vertically or pivot-mounted. Powder coated aluminum grills and brackets and corrosion-proof construction make them impervious to the harsh marine environment.

Features

• Contemporary styling complements any cabin
  
• Low magnetic field speaker
  
• Powder coated stainless steel grills and bracket
  
• 180® rotational gimbal mount included
  
• Optional pivot mount available
  
• Available in black and white

• Frequency Response: 60Hz to 20KHz (2 way)
  
• Power Handling: 100W per pair
  
• Impedance: 4 ohms
  
• Overall Dimensions: 7-¹¹⁄₁₆" x 5-⅛" x 4-¹¹⁄₁₆" (195mm x 130mm x 119mm)
  
• Weight: 3.35 lbs per Speaker
  
• Cone Size: 3" (76mm)

Compact Box Speakers
Part Number: MA-7500B

The MA-7500 offers good sound in those locations where the MA-9060 will not fit. These compact, concert hall-quality box speakers are designed to deliver top quality sound on your boat, where space is always at a premium. Contemporary styling complements any cabin, whether freestanding vertically or pivot-mounted. Powder coated aluminum grills and brackets and corrosion-proof construction make them impervious to the harsh marine environment.

Features

• Contemporary styling complements any cabin
  
• Low magnetic field speaker
  
• Powder coated stainless steel grills and bracket
  
• 180® rotational gimbal mount included
  
• Optional pivot mount available
  
• Available in black and white

• Frequency Response: 60Hz to 20KHz (2 way)
  
• Power Handling: 100W per pair
  
• Impedance: 4 ohms
  
• Overall Dimensions: 7-¹¹⁄₁₆" x 5-⅛" x 4-¹¹⁄₁₆" (195mm x 130mm x 119mm)
  
• Weight: 3.35 lbs per Speaker
  
• Cone Size: 3" (76mm)

4" Premium Round
Part Number: MA-5104

Low magnetic field, mid power speakers ideal for high power stereos or mid power amplifiers. They feature powder coated aluminum grills and a power handling capability of 140 watts/pair.

Features

• Low magnetic field speaker
  
• coaxial type speaker
  
• Available in white only

• Frequency Response: 70Hz to 20KHz (2 way)
  
• SPL: 89dB
  
• Cone Size: 4" (102mm)
  
• Peak Power: 140W/pair
  
• Mounting Depth: 2-¹⁄₁₆" (52mm)
  
• Speaker Impedance: 4 ohm
  
• Overall Diameter: 5-⁷⁄₁₆" (137mm)
  
• Cutout Diameter: 4-⅛" (104mm)
  
• Weight: 1.30 lbs. per speaker

5-½" Premium Round
Part Number: MA-5106

Low magnetic field, mid power speakers ideal for high power stereos or mid power amplifiers. They feature powder coated aluminum grills and a power handling capability of 140 watts/pair.

Features

• Low magnetic field speaker
  
• coaxial type speaker
  
• Available in white only

• Frequency Response: 55Hz to 20KHz (2 way)
  
• SPL: 89dB
  
• Cone Size: 5-½" (140mm)
  
• Peak Power: 140W/pair
  
• Continuous Power: 70W RMS/pair
  
• Mounting Depth: 2-¾" (69mm)
  
• Speaker Impedance: 4 ohm
  
• Overall Diameter: 6-¹⁵⁄₁₆" (176mm)
  
• Cutout Diameter: 5-¹¹⁄₁₆" (144mm)
  
• Speaker Weight: 2.05 lbs per speaker

7" Premium Round
Part Number: MA-5107

Low magnetic field, mid power speakers ideal for high power stereos or mid power amplifiers. They feature powder coated aluminum grills and a power handling capability of 140 watts/pair.

Features

• Low magnetic field speaker
  
• coaxial type speaker
  
• Available in white only

• Frequency Response: 50Hz to 20 KHz (2 Way)
  
• SPL: 88dB
  
• Cone Size: 7" (178mm)
  
• Peak Power: 140W/pair
  
• Continuous Power: 70W RMS/pair
  
• Mounting Depth: 3-⅞" (98mm)
  
• Speaker Impedance: 4 ohm
  
• Overall Diameter: 8-⅝" (218mm)
  
• Cutout Diameter: 7-⅛" (180mm)
  
• Weight: 3.45 lbs per Speaker

6" x 9" Premium Oval
Part Number: MA-5950

Medium powered three-way oval speakers designed for full range sound capability. Like the other speakers in the Premium Series, they are Low Magnetic Field, so you can mount them anywhere. Maximum peak power 160 watts/pair. Fits most 6" x 9" speaker cutouts.

Features

• Low Magnetic Field Speaker
  
• Fit most 6" x 9" cutouts
  
• Available in white color only

• Frequency Response: 50Hz to 20KHz (3 way)
  
• SPL: 88dB
  
• Peak Power: 160W per pair
  
• Continuous Power: 80W RMS/pair
  
• Speaker Impedance: 4 ohms
  
• Mounting Depth: 3-⁷⁄₁₆" (87mm)
  
• Overall Dimension: 10-⅜" x 7-¾" x 4-¾" (263mm x 196mm x 120mm)
  
• Cutout Dimension: 8-⁷⁄₁₆" x 5-¹⁵⁄₁₆" (213mm x 150mm)
  
• Weight: 3.30 lbs per Speaker
  
• Cone Size: 6" x 9" (152mm x 229mm)

4" 2-Way Coax - Infrared Remote Control Speaker
Part Number: MA-4054RC

MA-4055RC is a 4" dual cone Remote Control Speaker. Control volume, source and even power of your PolyPlanar audio system by pointing a waterproof, floating handheld remote control (MRR-2) at the speaker. Peak power handling capability 80 watts/pair. Only available in white color speaker.

Features

• Ultra-low magnetic field speaker
  
• Infrared Remote Control Speaker
  
• Integral grills allow for simple, one-piece installation
  
• Stainless steel mounting harware included
  
• Rugged waterproof design, teflon-coated wires, plastic grills, polypropylene cones, mylar tweeters and plastic frames
  
• Ideal replacement speakers for boaters who want to upgrade to waterproof speakers without changing the cutout size
  
• Available in White Speaker only

• Frequency response: 65Hz to 20KHZ (2 way)
  
• SPL: 87dB
  
• Type: 2-way Coaxial
  
• Cone Size: 4" (102mm)
  
• Speaker Impedance: 4 ohms
  
• Peak Power: 80W per pair
  
• Continuous Power: 40W RMS/pair
  
• Weight: 1.2 lbs per unit weight
  
• Outside Diameter: 5-¼" (132mm)
  
• Cutout Diameter: 4-¹⁄₁₆" (102mm)
  
• Mounting Depth: 2-⅛" (54mm)

Subcompact Box Speakers
Part Number: MA-840B

These subcompact box speakers are designed to fit in difficult locations and still offer high quality music sound. The ultra-low magnetic field design lets you mount them anywhere without adversely affecting navigation equipment such as compasses and autopilots. Polypropylene cones, stainless steel grills and brackets, and heavy-duty ABS enclosures make them corrosion-proof and waterproof. Dual cone design with 3" main cone size.

Features

• Ideal for locations where other speakers won’t fit
  
• Only 4" x 4"
  
• Ultra-low magnetic field speaker
  
• Stainless steel grill and bracket
  
• Available in black and white

Gunwale Mount Speaker
Part Number: MA-9020

Mount these full-sized speakers out of the way under the gunwale, where they’re protected from the elements, yet close enough to deliver rich, full sound. The molded, one-piece plastic grill protects the speaker components from splash and spray. The two-way vented port design offers full range response. Peak power 200 watts /pair.

Specifications

• Frequency Response: 55Hz to 20KHz (2 way)
  
• SPL: 86dB
  
• Peak Power: 200W/pair
  
• Speaker Impedance: 4 ohm
  
• Weight (each): 3.90 lbs per Speaker
  
• Overall Dimension: 10-⁷⁄₁₆" x 6" x 5-⁵⁄₁₆" (265mm x 152mm x 135mm)
  
• Cone Size: 5" (127mm)

Panel Mount Subwoofer with Amplifier
Part Number: MS-250

The MS-250 is a powered 10" round waterproof flush-mount subwoofer designed to complement your marine audio system by providing heavy-duty response with up to 150 watts RMS. Easy to install, the amplifier may be conveniently mounted remotely or directly onto the back of the speaker. Since it has its own amp, it won’t drain power from the primary system. (For Subwoofer without amplifier, order MS-150).

Features

• Corrosion proof design and construction for marine use
  
• Internal crossover and equalization matched to the speaker
  
• Internal distortion limiting circuit
  
• Will accept line or speaker level input
  
• Gain level control to match output to main system

• Power Handling: 2 x 50 watts RMS (Dual Voice Coils) 2x100watts Max.
  
• Frequency Response: 30Hz to 200Hz ( Amp Crossover)
  
• Operating Voltage (Amp): 13.8VDC (12v Nominal)
  
• Current Draw (Amp): 7 Amp Max
  
• Overall diameter: 12-¹¹⁄₁₆" (321mm)
  
• Cutout: 9-¹⁄₁₆" (230mm)
  
• Mounting Depth: 4-⅝" (116mm)
  
• Frequency Response: 40Hz to 400Hz

Component Box Speakers in Gray
Part Number: MA-3030G

The MA 3030 Box Speakers are a 3" Speaker with separate Tweeter designed to be bracket mounted for interior or Outdoor/Deck applications. The "U" style bracket is designed with many screw mount options. This component speaker is available in white or metallic gray color and would be the perfect companion to our MS series subwoofers. They are easily mounted in either the horizontal or vertical orientation with the supplied bracket.

Features

• Completely Waterproof
  
• Powder coated stainless bracket
  
• Gold-plated Binding Posts
  
• Powder coated stainless steel grill
  
• Mounting hardware and speaker wire included
  
• 3" 60W, 2-way box speaker
  
• Available in White or Metallic Gray

Round Flush-Mount Component Speaker in Gray
Part Number: MA-3013G

The MA3013 is a 3" Flush mount speaker are great for installations where mounting space is limited. This compact speaker is designed to be used alone or conjunction with the MS series Subwoofer systems. Ideal for mounting in flybridge overheads, smaller cabins or wherever space is at a premium.

Features

• 3" Cone
  
• 60W, Flush Mount, Midrange Speaker
  
• White or Metallic Gray
  
• Low Magnetic Field
  
• Waterproof construction throughout
  
• Powder coated stainless steel grill
  
• Mounting Hardware & Speaker Wire Included
  
• Quick Connect Terminals
  
• Meets or Exceeds 600hrs ASTM UV & Salt Spray Test

• Frequency Response: 70Hz to 20KHz (Single cone)
  
• SPL: 83dB
  
• Peak Power: 60W per speaker
  
• Continuous Power: 30W RMS/speaker
  
• Speaker Impedance: 4 ohms
  
• Weight (each): 0.50 lb
  
• Outside Grill: 3-⁹⁄₁₆" (89mm)
  
• Mounting Depth: 1-½" (37mm)
  
• Cutout: 2-⅞" (72mm)
  
• Cone Size: 3" (76mm)

Round Flush-Mount Component Speaker in White
Part Number: MA-3013W

The MA3013 is a 3" Flush mount speaker are great for installations where mounting space is limited. This compact speaker is designed to be used alone or conjunction with the MS series Subwoofer systems. Ideal for mounting in flybridge overheads, smaller cabins or wherever space is at a premium.

Features

• 3" Cone
  
• 60W, Flush Mount, Midrange Speaker
  
• White or Metallic Gray
  
• Low Magnetic Field
  
• Waterproof construction throughout
  
• Powder coated stainless steel grill
  
• Mounting Hardware & Speaker Wire Included
  
• Quick Connect Terminals
  
• Meets or Exceeds 600hrs ASTM UV & Salt Spray Test

• Frequency Response: 70Hz to 20KHz (Single cone)
  
• SPL: 83dB
  
• Peak Power: 60W per speaker
  
• Continuous Power: 30W RMS/speaker
  
• Speaker Impedance: 4 ohms
  
• Weight (each): 0.50 lb
  
• Outside Grill: 3-⁹⁄₁₆" (89mm)
  
• Mounting Depth: 1-½" (37mm)
  
• Cutout: 2-⅞" (72mm)
  
• Cone Size: 3" (76mm)

Compact Box Subwoofer
Part Number: MS-55

The MS-55 subwoofer is a compact, high efficiency bass enclosure optimized for marine applications. It’s small size enables it to be easily mounted below seats, under the gunwale area, behind the instrument panel, or any convenient location. The MS-55 is a self contained bass unit requiring no cutting of panels or holes in the boat interior. It produces solid, deep bass extending down to 40Hz and is the perfect addition to any audio system.

Features

• Dual Voicecoil, high-excursion, 5.25" woofer
  
• High density, UV stable enclosure
  
• Water resistant
  
• Bass-reflex, high-efficiency acoustic design
  
• Side vented output ports
  
• Compact size and molded-in mounts provide for convenient installation nearly anywhere
  
• Acoustically matched for use with Poly-Planar ME-51, MZ-100 and ME-400 amplifiers or can be used with any amplifier 25W - 100W

• Power Handling: 100W RMS
  
• Speaker Impedance: 4 ohm x 2 inputs
  
• Frequency Range: 40 Hz - 300 Hz
  
• Weight: 8.5 lb (3.8g)
  
• Width: 8-⅝" (218mm)
  
• Length: 11-½" (292mm)
  
• Height: 4-¹³⁄₁₆" (122mm)

MS-55 Subwoofer with ME-51 Amplifier
Part Number: MS-551

The MS-55 subwoofer is a compact, high efficiency bass enclosure optimized for marine applications. Its small size enables it to be easily mounted below seats, under the gunwale area, behind the instrument panel, or any convenient location. The MS-55 is a self contained bass unit requiring no cutting of panels or holes in the boat interior. It produces solid, deep bass extending down to 40Hz and is the perfect addition to any audio system.

Features:

• Dual Voicecoil, high-excursion, 5.25" woofer
  
• High density, UV stable enclosure
  
• Water resistant
  
• Bass-reflex, high-efficiency acoustic design
  
• Side vented output ports
  
• Compact size and molded-in mounts provide for convenient installation nearly anywhere.
  
• Acoustically matched for use with Poly-Planar ME-51, MZ-100 and ME-400 amplifiers or can be used with any amplifier 25 - 100 watts.

6" Titanium Series Speakers
Part Number: MA-8506W

The MA-8506 Titanium Series Speaker is a 6" waterproof, ultra low magnetic field 200 watt speaker with titanium plated cone. These three way speakers are perfect for replacement or upgrade of existing speakers and the magnets will not interfere with navigation equipment.

Features

• Colorfast plastic frame withstands UV rays
  
• Anti-magnetic design
  
• Waterproof construction throughout
  
• Rugged powder coated stainless steel grill
  
• 3-way design with mylar tweeter & midrange
  
• Available in Black and White

• Peak Power: 200W/each
  
• Continuous Power: 100W RMS/pair
  
• Speaker Impedance: 4 ohm
  
• ASTM UV & Salt Spray Test: Meets or Exeeds 600hrs
  
• Weight (each): 1.85 lbs per Speaker
  
• Mounting Depth: 2-⁷⁄₁₆" (62mm)
  
• Outside Grill: 7" (177mm)
  
• Cutout: 5-⁹⁄₁₆" (140mm)
  
• Frequency Response: 55Hz to 20KHz (3 way)
  
• SPL: 90dB
  
• Cone Size: 6" (152mm)

Component Box Speakers in White
Part Number: MA-3030W

The MA 3030 Box Speakers are a 3" Speaker with separate Tweeter designed to be bracket mounted for interior or Outdoor/Deck applications. The "U" style bracket is designed with many screw mount options. This component speaker is available in white or metallic gray color and would be the perfect companion to our MS series subwoofers. They are easily mounted in either the horizontal or vertical orientation with the supplied bracket.

Features

• Completely Waterproof
  
• Powder coated stainless bracket
  
• Gold-plated Binding Posts
  
• Powder coated stainless steel grill
  
• Mounting hardware and speaker wire included
  
• 3" 60W, 2-way box speaker
  
• Available in White or Metallic Gray

6" Titanium Series Speakers
Part Number: MA-8506B

The MA-8506 Titanium Series Speaker is a 6" waterproof, ultra low magnetic field 200 watt speaker with titanium plated cone. These three way speakers are perfect for replacement or upgrade of existing speakers and the magnets will not interfere with navigation equipment.

Features

• Colorfast plastic frame withstands UV rays
  
• Anti-magnetic design
  
• Waterproof construction throughout
  
• Rugged powder coated stainless steel grill
  
• 3-way design with mylar tweeter & midrange
  
• Available in Black and White

• Peak Power: 200W/each
  
• Continuous Power: 100W RMS/pair
  
• Speaker Impedance: 4 ohm
  
• ASTM UV & Salt Spray Test: Meets or Exeeds 600hrs
  
• Weight (each): 1.85 lbs per Speaker
  
• Mounting Depth: 2-⁷⁄₁₆" (62mm)
  
• Outside Grill: 7" (177mm)
  
• Cutout: 5-⁹⁄₁₆" (140mm)
  
• Frequency Response: 55Hz to 20KHz (3 way)
  
• SPL: 90dB
  
• Cone Size: 6" (152mm)

20’ Wired Remote Control
Part Number: MRR-5

• Full Remote control of main stereo
  
• 3-⅞" Diameter
  
• Waterproof design
  
• 6m (20’) Extension Cable included

MR45R Wired Remote Control
Part Number: MR45R

6’ Wired remote with display for MR45 Series and MRD80 series stereos

Features

• Digital display with adjustable backlight
  
• Waterproof design
  
• Extension cable available (sold separately)
  
• Available in black color only

• Diameter Size: 3.47" (88mm)
  
• Cutout Diameter Size: 3" (76mm)
  
• Weight: 0.30 lb

MRRF18 Wireless RF Remote

Poly-Planar’s MRRF18 Wireless RF Remote allows remote operation of your Poly-Planar stereo system up to 100’ away - with no line of sight needed! MRRF18 will give you the ability to control your radio through walls and doors. Simply connect the receiver to the IR port located at the back of your Poly-Planar radio.

Features:

• For use with Poly-Planar’s MR45 and MRD80 Series Marine Radios
  
• RF Receiver included
  
• Waterproof design
  
• 100 feet range
  

MRD-70 AM/FM/CD/MP3 Multi-Zone Component System
Part Number: MRD-70

The MRD-70 AM/FM/CD Receiver and RD-44 Display are the base foundation for an expandable multi-zone system that offers independent control in up to 4 zones equipped with the RD-44 Remote Display and MZ-100 Amp in each zone. Easily connected through a single watertight DIN type cable, each remote has independent control over the audio input source. The many unique features include an intercom that will allow communication between stations. Two auxiliary inputs on the receiver accommodate direct audio input from other audio sources/media players. Just plug in your iPod?, TV or VCR and you have great audio throughout the system. The unique mounting system for the waterproof display accommodates Panel, Pod or bracket mounting.

Features

• AM/FM, CD and MP3 compatible
  
• Supports XM (With IXM-10 Module)
  
• Waterproof design (Front panel IP65)
  
• 2 Auxiliary inputs
  
• 1 Auxiliary output Variable Line output
  
• No-Skip CD/MP3 with 10 sec. Delay
  
• Available in Black and Gray color stereo

• Frequency Response: 20Hz to 20KHz (Contoured response)
  
• SNR: 85dB
  
• Max operating power: 45W /channel x 4
  
• RMS operating power: 25W /channel x 4
  
• Nominal current consumption: 7 Amps (Full power, 4 speakers @ 4 ohms)

• Full control of audio functions and sources
  
• 32 character back lighted display
  
• Self dimming for night use
  
• Back lighted key pad
  
• Flush panel or gimbal bracket mount options
  
• Integral intercom with speaker
  
• Infrared remote control
  
• DIN cable connection for MRD-70 or MZ-100

Remote Head
Part Number: RD-44Black

The RD-44 is designed to control the audio functions and sources of the MRD-70 marine radio and the MZ-100 DSP Zone Amplifier. With versatile mounting options, the RD-44 can be installed up to 60 feet away from the radio or amplifier in a variety of positions. In addition, the built-in intercom function allows communication between the vessel?s audio zones.

Features

• Full control of audio functions and sources
  
• 32 character back lighted display
  
• Self dimming for night use
  
• Back lighted key pad
  
• Flush panel or gimbal bracket mount options
  
• Integral intercom with speaker
  
• Infrared remote control
  
• DIN cable connection for MRD-70 or MZ-100
  
• Available in Gray and Black color

• Current consumption: 250mA
  
• Dimensions: 4-½" x 4-½" x 1-¹¹⁄₁₆" (113mm x 113mm x 43mm)

Remote Head
Part Number: RD-44Gray

The RD-44 is designed to control the audio functions and sources of the MRD-70 marine radio and the MZ-100 DSP Zone Amplifier. With versatile mounting options, the RD-44 can be installed up to 60 feet away from the radio or amplifier in a variety of positions. In addition, the built-in intercom function allows communication between the vessel?s audio zones.

Features

• Full control of audio functions and sources
  
• 32 character back lighted display
  
• Self dimming for night use
  
• Back lighted key pad
  
• Flush panel or gimbal bracket mount options
  
• Integral intercom with speaker
  
• Infrared remote control
  
• DIN cable connection for MRD-70 or MZ-100
  
• Available in Gray and Black color

• Current consumption: 250mA
  
• Dimensions: 4-½" x 4-½" x 1-¹¹⁄₁₆" (113mm x 113mm x 43mm)

MRD-70 AM/FM/CD/MP3 Multi-Zone Component System
Part Number: MRD-70

The MRD-70 AM/FM/CD Receiver and RD-44 Display are the base foundation for an expandable multi-zone system that offers independent control in up to 4 zones equipped with the RD-44 Remote Display and MZ-100 Amp in each zone. Easily connected through a single watertight DIN type cable, each remote has independent control over the audio input source. The many unique features include an intercom that will allow communication between stations. Two auxiliary inputs on the receiver accommodate direct audio input from other audio sources/media players. Just plug in your iPod?, TV or VCR and you have great audio throughout the system. The unique mounting system for the waterproof display accommodates Panel, Pod or bracket mounting.

Features

• AM/FM, CD and MP3 compatible
  
• Supports XM (With IXM-10 Module)
  
• Waterproof design (Front panel IP65)
  
• 2 Auxiliary inputs
  
• 1 Auxiliary output Variable Line output
  
• No-Skip CD/MP3 with 10 sec. Delay
  
• Available in Black and Gray color stereo

• Frequency Response: 20Hz to 20KHz (Contoured response)
  
• SNR: 85dB
  
• Max operating power: 45W /channel x 4
  
• RMS operating power: 25W /channel x 4
  
• Nominal current consumption: 7 Amps (Full power, 4 speakers @ 4 ohms)

• Full control of audio functions and sources
  
• 32 character back lighted display
  
• Self dimming for night use
  
• Back lighted key pad
  
• Flush panel or gimbal bracket mount options
  
• Integral intercom with speaker
  
• Infrared remote control
  
• DIN cable connection for MRD-70 or MZ-100

MRD80 AM/FM/CD/MP3/WMA/Sirius Satellite Ready stereo
Part Number: MRD80

Poly-Planar’s MRD80 is the Disc Player version from the MRD80 series. The MRD80 is an AM/FM/CD/MP3/WMA/Sirius Satellite Ready stereo. The MRD80 is a full-featured waterproof marine stereo, engineered and optimized for marine use with an adjustable backlight display type and a flip down face design. A SD Card Reader is available at the front. AUX-Input available, iPod® Input available and USB Input available to play your music in a USB Flash drive. Wired and Wireless Remotes are also available (sold separately). There is a Gimbal Mount option that allows the unit to mount anywhere from top to bottom.

Features:

• Adjustable backlight on display
  
• Rotary encoder style volume knob and function select knob
  
• Selectable powered sub channel output
  
• Built-in IR receiver (front) and IR input (back) - unit will interface with Poly-Planar IR Speakers
  
• MRR2 wireless remote compatible (sold separately), MR45R wired remote compatible (sold separately)
  
• Multiple Inputs available (Auxiliary Input, iPod® Input, USB Input, Front SD Card Input)
  
• Selectable EQ setup so user can select best audio setting for particular speakers.
  
• Closed cell foam gasket for sealing chassis flange to mount surface.
  
• Gimbal mount option that allows the unit to mount from top or bottom. With the gimbal mount, no covers or additional mounting boxes are required for installation. Units can also be flush mounted to any flat surface.
  
• Both back side and front side of unit are waterproof to IP66
  
• 2 x 16 character digital display.
  
• Supplied with a sun/dust cover for the front face.
  
• PCB in unit is coated for resistance to moisture
  
• Face flips down for access to SD card and CD deck
  
• AM/FM frequencies adaptable to US and European markets
  
• CD deck function stops when face is down
  
• RDS enabled
  
• Preset memory and last setting on power down. Comes back in same mode when power on.

MRD80i AM/FM/Sirius Satellite Ready/Internal DMD Dock
Part Number: MRD80i

The MRD80i is the DMD(Digital Music Device) Dock version from the MRD80 series. The MRD80i is an AM/FM/Sirius Satellite Ready stereo with no Disc Player, but with an internal docking station for your digital music devices (DMD) such as an iPod®, MP3 or Smartphone device. Insert your digital music devices and play your music. The MRD80i is a full-featured waterproof marine stereo, engineered and optimized for marine use. Designed specifically for the marine environment with an adjustable backlight display type and flip down face design. A SD Card Reader available at the front, USB Input available to play your music in a USB Flash drive. Additional AUX Input available at the back.. Wired and Wireless Remotes also available (sold separately). A Gimbal Mount option that allows the unit to mount anywhere from top to bottom.

Features:

• Adjustable backlight on display
  
• Rotary encoder style volume knob and function select knob
  
• Selectable powered sub channel output
  
• Built-in IR receiver (front) and IR input (back) - unit will interface with Poly-Planar IR Speakers
  
• MRR2 wireless remote compatible (sold separately), MR45R wired remote compatible (sold separately)
  
• Multiple Inputs available (Auxiliary Input, USB Input, Front SD Card Input)
  
• Selectable EQ setup so user can select best audio setting for particular speakers.
  
• Closed cell foam gasket for sealing chassis flange to mount surface.
  
• Gimbal mount option that allows the unit to mount from top or bottom. With the gimbal mount, no covers or additional mounting boxes are required for installation. Units can also be flush mounted to any flat surface.
  
• Both back side and front side of unit are waterproof to IP66
  
• 2 x 16 character digital display.
  
• Supplied with a sun/dust cover for the front face.
  
• PCB in unit is coated for resistance to moisture
  
• Face flips down for access to SD card and DMD dock.
  
• AM/FM frequencies adaptable to US and European markets
  
• RDS enabled
  
• Preset memory and last setting on power down. Comes back in same mode when power on.

MR45S AM/FM/CD/MP3/WMA/Sirius Satellite Ready
Part Number: MR45S-B

MR45S is one of the MR45 series. MR45S is the full-featured stereo version. MR45S is an AM/FM/CD/MP3/WMA/Sirius Satellite Ready stereo. MR45S is a full-featured stereo receiver designed specifically for the marine environment with adjustable backlight display and flip down face design. Front and Back AUX-Input available for your MP3 music device, iPod® Input available for your iPod®/iPhone® devices and USB Input available to play your music in a USB Flash drive. Wired and Wireless Remotes available (sold separately).

Features

• Flip down face design, non-removable
  
• MRR2 wireless remote compatible (sold separately)
  
• MR45R wired remote compatible (sold separately)
  
• Adjustable backlight display
  
• Built-in IR receiver (front) and IR input (back) - unit will interface with Poly-Planar IR Speakers
  
• Front and Back AUX-Input available for your MP3 music device
  
• iPod® Input available for your iPod®/iPhone® devices
  
• USB Input available to play your music in a USB Flash drive
  
• Available in Black (part# MR45S-B) and White (part# MR45S-W)

• Cutout Dimension: 7-¹⁄₁₆" x 2-¹⁄₁₆"
  
• Deep Clearance: 7-¹⁄₁₆"
  
• Overall Dimension: 7-¹⁄₁₆" x 2-¹⁄₁₆" x 7-⅞"
  
• Power Supply: 13.8V DC (10.8-15.6V allowable)
  
• Speaker Impedance: 4 or 8 ohm
  
• Output Power: 45W x 4CH
  
• Fuse: 15A

MR45S AM/FM/CD/MP3/WMA/Sirius Satellite Ready
Part Number: MR45S-W

MR45S is one of the MR45 series. MR45S is the full-featured stereo version. MR45S is an AM/FM/CD/MP3/WMA/Sirius Satellite Ready stereo. MR45S is a full-featured stereo receiver designed specifically for the marine environment with adjustable backlight display and flip down face design. Front and Back AUX-Input available for your MP3 music device, iPod® Input available for your iPod®/iPhone® devices and USB Input available to play your music in a USB Flash drive. Wired and Wireless Remotes available (sold separately).

Features

• Flip down face design, non-removable
  
• MRR2 wireless remote compatible (sold separately)
  
• MR45R wired remote compatible (sold separately)
  
• Adjustable backlight display
  
• Built-in IR receiver (front) and IR input (back) - unit will interface with Poly-Planar IR Speakers
  
• Front and Back AUX-Input available for your MP3 music device
  
• iPod® Input available for your iPod®/iPhone® devices
  
• USB Input available to play your music in a USB Flash drive
  
• Available in Black (part# MR45S-B) and White (part# MR45S-W)

• Cutout Dimension: 7-¹⁄₁₆" x 2-¹⁄₁₆"
  
• Deep Clearance: 7-¹⁄₁₆"
  
• Overall Dimension: 7-¹⁄₁₆" x 2-¹⁄₁₆" x 7-⅞"
  
• Power Supply: 13.8V DC (10.8-15.6V allowable)
  
• Speaker Impedance: 4 or 8 ohm
  
• Output Power: 45W x 4CH
  
• Fuse: 15A

MR45C AM/FM/CD/MP3/WMA/No Sirius
Part Number: MR45C-B

MR45C is one of the MR45 series. MR45C is the AM/FM/CD/MP3/WMA/No Sirius version. MR45C is a stereo receiver designed specifically for the marine environment with adjustable backlight display and flip down face design. Front and Back AUX-Input available for your MP3 music device, iPod® Input available for your iPod®/iPhone® devices and USB Input available to play your music in a USB Flash drive. Wired and Wireless Remotes available (sold separately).

Features

• Flip down face design, non-removable
  
• MRR2 wireless remote compatible (sold separately)
  
• MR45R wired remote compatible (sold separately)
  
• Adjustable backlight display
  
• Built-in IR receiver (front) and IR input (back) - unit will interface with Poly-Planar IR Speakers
  
• Front and Back AUX-Input available for your MP3 music device
  
• iPod® Input available for your iPod®/iPhone® devices
  
• USB Input available to play your music in a USB Flash drive
  
• Available in Black (part# MR45C-B) and White (part# MR45C-W)

• Cutout Dimension: 7-¹⁄₁₆" x 2-¹⁄₁₆"
  
• Deep Clearance: 7-¹⁄₁₆"
  
• Overall Dimension: 7-¹⁄₁₆" x 2-¹⁄₁₆" x 7-⅞"
  
• Power Supply: 13.8V DC (10.8-15.6V allowable)
  
• Speaker Impedance: 4 or 8 ohm
  
• Output Power: 45W x 4CH
  
• Fuse: 15A

MR45C AM/FM/CD/MP3/WMA/No Sirius
Part Number: MR45C-W

MR45C is one of the MR45 series. MR45C is the AM/FM/CD/MP3/WMA/No Sirius version. MR45C is a stereo receiver designed specifically for the marine environment with adjustable backlight display and flip down face design. Front and Back AUX-Input available for your MP3 music device, iPod® Input available for your iPod®/iPhone® devices and USB Input available to play your music in a USB Flash drive. Wired and Wireless Remotes available (sold separately).

Features

• Flip down face design, non-removable
  
• MRR2 wireless remote compatible (sold separately)
  
• MR45R wired remote compatible (sold separately)
  
• Adjustable backlight display
  
• Built-in IR receiver (front) and IR input (back) - unit will interface with Poly-Planar IR Speakers
  
• Front and Back AUX-Input available for your MP3 music device
  
• iPod® Input available for your iPod®/iPhone® devices
  
• USB Input available to play your music in a USB Flash drive
  
• Available in Black (part# MR45C-B) and White (part# MR45C-W)

• Cutout Dimension: 7-¹⁄₁₆" x 2-¹⁄₁₆"
  
• Deep Clearance: 7-¹⁄₁₆"
  
• Overall Dimension: 7-¹⁄₁₆" x 2-¹⁄₁₆" x 7-⅞"
  
• Power Supply: 13.8V DC (10.8-15.6V allowable)
  
• Speaker Impedance: 4 or 8 ohm
  
• Output Power: 45W x 4CH
  
• Fuse: 15A

MR45D Stereo, MA206 Speaker & WC2 Splash Cover Combo Pack
Part Number: MR45D-Cpak

MR45D-Cpak is a combo package of MR45D stereo, a pair of MA206 speaker and WC2 splash cover. MR45D is the AM/FM/Sirius Satellite Ready Stereo version but no Disc Player. MR45D is a stereo receiver designed specifically for the marine environment with adjustable backlight display. Front and Back AUX-Input available for your MP3 music device, iPod® Input available for your iPod®/iPhone® devices and USB Input available to play your music in a USB Flash drive. Wired and Wireless Remotes available (sold separately).

Features

• MRR2 wireless remote compatible (sold separately)
  
• MR45R wired remote compatible (sold separately)
  
• Adjustable backlight display
  
• Built-in IR receiver (front) and IR input (back) - unit will interface with Poly-Planar IR Speakers
  
• Front and Back AUX-Input available for your MP3 music device
  
• iPod® Input available for your iPod®/iPhone® devices
  
• USB Input available to play your music in a USB Flash drive
  
• MR45D is available in White only

• MR45D Stereo Overall Dimension: 7-¹⁄₁₆" x 2-¹⁄₁₆" x 7-⅞"
  
• MA206 Speaker Impedance: 4 ohms
  
• MA206 Max Power Handling per speaker: 40 watts
  
• MA206 Speaker Overall Diameter: 7-½"
  
• MA206 Speaker Cutout Diameter: 5-¹³⁄₁₆"

MR41W Stereo, MA206 Speaker & WC2 Splash Cover Combo Pack
Part Number: MR41W-Cpak

MR41W-Cpak is a combo package of MR41 stereo, a pair of MA206 speaker and WC2 splash cover. MR41 an AM/FM/CD/MP3/WMA Stereo with slide down detachable panel. USB Input available at the front to play your music in a USB Flash drive and AUX-Input available for your MP3 music device. Wireless remote available (included).

Features

• AM/FM, CD and MP3 compatible
  
• Max Power 4 x 40W
  
• Slide down detachable front panel for CD Access
  
• Front USB jack
  
• 1 Auxiliary output Fixed Line output
  
• No-Skip CD with 10 sec. delay
  
• Built in IR Receiver
  
• Wireless Remote included
  
• US Frequency only

• MR41W Stereo Overall Dimension: 7-⁹⁄¹⁶" x 2-⁷⁄¹⁶" x 7-⅞"
  
• MA206 Speaker Impedance: 4 ohms
  
• MA206 Max Power Handling per speaker: 40 watts
  
• MA206 Speaker Overall Diameter: 7-½"
  
• MA206 Speaker Cutout Diameter: 5-¹³⁄¹⁶"

ME52 Amp with MA4055 Speaker and IC3.5 Panel Mount Adapter
Part Number: MP3-KIT_AB

MP3-Kit-A is a combo kit. The kit includes ME-52 50W waterproof amplifier with separate panel mount waterproof volume control knob, IC3.5-PM panel mount 3.5mm MP3 adapter for iPod® or other MP3 player and a pair of MA4055 5" coaxial waterproof speakers. MP3-Kit-AB provides the ability to have stereo sound on small watercraft such as Jet Skis, inflatable’s or tenders. Also a perfect solution for off road vehicles, motorcycles, ATV’s and golf carts. Easily installed where space is a premium. The ME-52 amplifier can be mounted underneath a seat or inside the boat’s structure. The IC3.5-PM MP3 adapter and Volume Control can be mounted on the dash or inside the stowage compartment. This provides a convenient input for portable MP3 or CD players. And with the included Poly-Planar Waterproof Speakers, you’ll have crisp, clear stereo sound on the go!

Features

• Kit Includes: ME-52 50W waterproof Amplifier with separate panel mount waterproof volume control
  
• Kit Includes: IC3.5-PM Panel mount 3.5mm MP3 adapter for iPod® or other MP3 players
  
• Kit Includes: MA-4055 5" coaxial waterproof speakers with speaker wires included

ME60 Amp with MA4055 Speaker and IC3.5 Panel Mount Adapter
Part Number: MP3-Kit4-B

MP3-Kit4-B is a combo kit. The kit includes ME-60 120W waterproof amplifier with separate panel mount waterproof volume control knob, IC3.5-PM panel mount 3.5mm MP3 adapter for iPod® or other MP3 player and a pair of MA4055 5" coaxial waterproof speakers. MP3-Kit4-B provides the ability to have stereo sound on small watercraft such as Jet Skis, inflatable’s or tenders. Also a perfect solution for off road vehicles, motorcycles, ATV’s and golf carts. Easily installed where space is a premium. The ME-60 amplifier can be mounted underneath a seat or inside the boat’s structure. The IC3.5-PM MP3 adapter and Volume Control can be mounted on the dash or inside the stowage compartment. This provides a convenient input for portable MP3 or CD players. And with the included Poly-Planar Waterproof Speakers, you’ll have crisp, clear stereo sound on the go!

Features

• Kit Includes: ME-60 120W waterproof Amplifier with separate panel mount waterproof volume control
  
• Kit Includes: IC3.5-PM Panel mount 3.5mm MP3 adapter for iPod® or other MP3 players
  
• Kit Includes: MA-4055 5" coaxial waterproof speakers with speaker wires included
  
• The speakers can be changed to white color speaker (Part# MP3-KIT4-W when you order the kit with white color speaker)

ME60 Amp with MA4055 Speaker and IC3.5 Panel Mount Adapter
Part Number: MP3-Kit4-W

MP3-Kit4-W is a combo kit. The kit includes ME-60 120W waterproof amplifier with separate panel mount waterproof volume control knob, IC3.5-PM panel mount 3.5mm MP3 adapter for iPod® or other MP3 player and a pair of MA4055 5" coaxial waterproof speakers. MP3-Kit4-W provides the ability to have stereo sound on small watercraft such as Jet Skis, inflatable’s or tenders. Also a perfect solution for off road vehicles, motorcycles, ATV’s and golf carts. Easily installed where space is a premium. The ME-60 amplifier can be mounted underneath a seat or inside the boat’s structure. The IC3.5-PM MP3 adapter and Volume Control can be mounted on the dash or inside the stowage compartment. This provides a convenient input for portable MP3 or CD players. And with the included Poly-Planar Waterproof Speakers, you’ll have crisp, clear stereo sound on the go!

Features

• Kit Includes: ME-60 120W waterproof Amplifier with separate panel mount waterproof volume control
  
• Kit Includes: IC3.5-PM Panel mount 3.5mm MP3 adapter for iPod® or other MP3 players
  
• Kit Includes: MA-4055 5" coaxial waterproof speakers with speaker wires included
  
• The speakers can be changed to Black color speaker (Part# MP3-KIT4-B when you order the kit with black color speaker)

ME60 Amp with MA7500 Box Speaker, MS55 Box Subwoofer and IC3.5 Panel Mount Adapter
Part Number: MP3-Kit7 -B

MP3-Kit7-B is a combo kit. The kit includes ME-60 120W waterproof amplifier with separate panel mount waterproof volume control knob, IC3.5-PM panel mount 3.5mm MP3 adapter for iPod® or other MP3 player, a pair of MA7500 box waterproof speaker and MS55 box subwoofer. MP3-Kit7-B provides the ability to have stereo sound on small watercraft such as Jet Skis, inflatable’s or tenders. Also a perfect solution for off road vehicles, motorcycles, ATV’s and golf carts. Easily installed where space is a premium. The ME-60 amplifier can be mounted underneath a seat or inside the boat’s structure. The IC3.5-PM MP3 adapter and Volume Control can be mounted on the dash or inside the stowage compartment. This provides a convenient input for portable MP3 or CD players. And with the included Poly-Planar Waterproof Speakers and subwoofer, you’ll have crisp, clear stereo sound on the go!

Features

• Kit Includes: ME-60 120W waterproof Amplifier with separate panel mount waterproof volume control
  
• Kit Includes: IC3.5-PM Panel mount 3.5mm MP3 adapter for iPod® or other MP3 players
  
• Kit Includes: MA7500 box waterproof speakers with speaker wires included
  
• Kit Includes: MS55 box subwoofer
  
• The speakers can be changed to White color speaker (Part# MP3-KIT7-W when you order the kit with White color speaker)

ME60 Amp with MA7500 Box Speaker, MS55 Box Subwoofer and IC3.5 Panel Mount Adapter
Part Number: MP3-Kit7 -W

MP3-Kit7-W is a combo kit. The kit includes ME-60 120W waterproof amplifier with separate panel mount waterproof volume control knob, IC3.5-PM panel mount 3.5mm MP3 adapter for iPod® or other MP3 player, a pair of MA7500 box waterproof speaker and MS55 box subwoofer. MP3-Kit7-W provides the ability to have stereo sound on small watercraft such as Jet Skis, inflatable’s or tenders. Also a perfect solution for off road vehicles, motorcycles, ATV’s and golf carts. Easily installed where space is a premium. The ME-60 amplifier can be mounted underneath a seat or inside the boat’s structure. The IC3.5-PM MP3 adapter and Volume Control can be mounted on the dash or inside the stowage compartment. This provides a convenient input for portable MP3 or CD players. And with the included Poly-Planar Waterproof Speakers and subwoofer, you’ll have crisp, clear stereo sound on the go!

Features

• Kit Includes: ME-60 120W waterproof Amplifier with separate panel mount waterproof volume control
  
• Kit Includes: IC3.5-PM Panel mount 3.5mm MP3 adapter for iPod® or other MP3 players
  
• Kit Includes: MA7500 box waterproof speakers with speaker wires included
  
• Kit Includes: MS55 box subwoofer
  
• The speakers can be changed to Black color speaker (Part# MP3-KIT7-B when you order the kit with Black color speaker)

MRD70 Black with FREE MP3, iPod & Satellite Radio Adapter
Part #: MRD70B/IP3.5

MRD70 AM, FM, CD & MP3 Multi-Zone Component System
The MRD-70 AM/FM/CD Receiver and RD-44 Display are the base foundation for an expandable multi-zone system that offers independent control in up to 4 zones equipped with the RD-44 Remote Display and MZ-100 Amp in each zone. Easily connected through a single watertight DIN type cable, each remote has independent control over the audio input source. The many unique features include an intercom that will allow communication between stations. Two auxiliary inputs on the receiver accommodate direct audio input from other audio sources/media players. Just plug in your iPod, TV or VCR and you have great audio throughout the system. The unique mounting system for the waterproof display accommodates Panel, Pod or bracket mounting.

Features:

• AM/FM, CD and MP3 compatible
  
• Supports XM (With IXM-10 Module)
  
• Waterproof design (Front panel IP65)
  
• 2 Auxiliary inputs
  
• 1 Auxiliary output Variable Line output
  
• No-Skip CD/MP3 with 10 second delay

• Dashboard/panel mount waterproof female 3.5mm stereo jack
  
• 4’ long extension cable with RCA plugs
  
• Rubber Plug keeps water out when not in use
  
• Can be installed on panels up to 1.25" thick
  
• 4’ long 3.5mm to 3.5mm stereo headphone jack extension cord included
  
• Also available in white color adapter (Part# IC3.5PM W)

MRD70 Grey with FREE MP3, iPod & Satellite Radio Adapter
Part #: MRD70G/IP3.5

MRD70 AM, FM, CD & MP3 Multi-Zone Component System
The MRD-70 AM/FM/CD Receiver and RD-44 Display are the base foundation for an expandable multi-zone system that offers independent control in up to 4 zones equipped with the RD-44 Remote Display and MZ-100 Amp in each zone. Easily connected through a single watertight DIN type cable, each remote has independent control over the audio input source. The many unique features include an intercom that will allow communication between stations. Two auxiliary inputs on the receiver accommodate direct audio input from other audio sources/media players. Just plug in your iPod, TV or VCR and you have great audio throughout the system. The unique mounting system for the waterproof display accommodates Panel, Pod or bracket mounting.

Features:

• AM/FM, CD and MP3 compatible
  
• Supports XM (With IXM-10 Module)
  
• Waterproof design (Front panel IP65)
  
• 2 Auxiliary inputs
  
• 1 Auxiliary output Variable Line output
  
• No-Skip CD/MP3 with 10 second delay

• Dashboard/panel mount waterproof female 3.5mm stereo jack
  
• 4’ long extension cable with RCA plugs
  
• Rubber Plug keeps water out when not in use
  
• Can be installed on panels up to 1.25" thick
  
• ’ long 3.5mm to 3.5mm stereo headphone jack extension cord included
  
• Also available in white color adapter (Part# IC3.5PM W)