Nautic Boiler B3 - 5.3 Gallon - 12V - 300W

Casing in composite material and Tank in Aisi 316 stainless steel.

Benefits:

• High quality materials
• Heat exchanger with wide exchange surface
• Produces hot water from the electric element, that is fitted with an adjustable safety thermostat
• Relief/non-return vale that allows discharging of the water heater in case of disuse

Features:

• The heat exchanger used for Quick "Nautic Boiler B3” is AISI 316L stainless steel. The heat exchang capacity is notably higher than that achieved from other manufactures.
• The tank is made of 1.5 mm gauge AISI 316 stainless steel welded with Argon shielding gas and hence highly resistant to corrosive agents.
• The electrical heating element is made of Incoloy®.
• The thermal insulation is high density polyurethane foam injected between the cover and tank giving excellent heat retention properties.

Included Accessories:

• Tank mounting brackets are in stainless steel AISI 316 and are supplied as standard in each package.

Nautic Boiler B3 - 3.9 Gallon - 12V - 300W

Casing in composite material and Tank in Aisi 316 stainless steel.

Benefits:

• High quality materials
• Heat exchanger with wide exchange surface
• Produces hot water from the electric element, that is fitted with an adjustable safety thermostat
• Relief/non-return vale that allows discharging of the water heater in case of disuse

Features:

• The heat exchanger used for Quick "Nautic Boiler B3” is AISI 316L stainless steel. The heat exchang capacity is notably higher than that achieved from other manufactures.
• The tank is made of 1.5 mm gauge AISI 316 stainless steel welded with Argon shielding gas and hence highly resistant to corrosive agents.
• The electrical heating element is made of Incoloy®.
• The thermal insulation is high density polyurethane foam injected between the cover and tank giving excellent heat retention properties.

Included Accessories:

• Tank mounting brackets are in stainless steel AISI 316 and are supplied as standard in each package.

• Pressure Relief Valve - 1/2" fitting, brass chrome plated, pressured up to 6 bars
  
• Bristish standard thread fitting
  
• Overall length 1-3/4"
  
• Relief/non return that allows discharging of the water heater in case of disuse

800W Heating Element for Sigmar Heater- 110V

• Made of Incoloy
  
• 11" Long
  
• 1-5/8" Diameter British threads
  
• 7-3/4" Long standard electrical anode rod

500W Heating Element for Nautic B3 Heaters - 110V

• Made of Incoloy
  
• 11" Long
  
• 1-5/8" Diameter British threads
  
• 7-3/4" Long standard electrical anode rod

1200W Heating Element for B3 & Sigmar Heaters - 110V

• Made of Incoloy
  
• 11" Long
  
• 1-5/8" Diameter British threads
  
• 7-3/4" Long standard electrical anode rod

Audrey WL Wall Light with USB & Switch Daylight Black Neopreme Chrome

Reading light with wall or desk mounted, adjustable,  aluminum with polished finish and black neoprene with switch. 

Features:

• LED Protection: Spike protected ± 500V
• Polarity sensitive: YES
• Power Type: Constant Voltage
• Light Source: LED
• Power consumption: 1.5W
• Current consumption: 0.25A @ 24V
• Average lifetime: 50,000 hours
• IP security degree: 40
• Flexible: Yes
• Switch: Yes
• Mounting: Screws

Audrey Wall Light with USB Daylight - Black Chrome

Reading light with wall mounted, adjustable,  aluminum with polished chrome finish and black leather.

Features:

• LED Protection: Spike protected ± 500V
• Polarity sensitive: Yes

Secret 6W Retractable Lamp with Automatic Switch IP66 Mirrored Chrome Finish - Warm White LED

Retractable lamp with automatic switch opening and lighting at 360°.

Features:

• LED Protection: Spike protected ± 500V
• Polarity sensitive: YES
• Power type: Constant Voltage
• Light source: 0 x LED
• Supply: 10 ÷ 30 V
• Power consumption: 6W
• Current consumption: 0.25 A @ 24 V
• Average lifetime: 50,000 h
• IP security degree: 66

Secret 3W Retractable Lamp with Automatic Switch IP66 Mirrored Chrome Finish - Warm White LED

Retractable lamp with automatic switch opening and lighting at 360°.

Features:

• LED Protection: Spike protected ± 500V
• Polarity sensitive: YES
• Power type: Constant Voltage
• Light source: 0 x LED
• Supply: 10 ÷ 30 V
• Power consumption: 3W
• Current consumption: 0.13 A @ 24 V
• Average lifetime: 50,000 h
• IP security degree: 66

Action Touch Bicolor LED Light - Daylight/Red Engine

Ceiling LED lamp with rectangular frame. White plastic frame. Compartment light. Installation on ceiling or wall.

Features:

• LED Protection: Spike protected ± 500V
• Polarity sensitive: YES

Action 10W Engine Room LED Light - Daylight - 12/24V

Ceiling LED lamp with rectangular frame. White plastic frame. Compartment light. Installation on ceiling or wall.

Specifications:

• Power type: Constant Voltage
  
• Light source: 126 x High Luminosity
  
• Supply: 12 / 24 V
  
• Power consumption: 10 W
  
• Current consumption: 0.42 A @ 24V
  
• Average lifetime: 50,000 h
  
• IP security degree: 66

• Cutout: 2 9/16"
  
• Rating: IP66
  
• Watts: 6W
  
• Input Voltage: 10-30V DC
  
• Bezel/Color: Round/Stainless
  
• Light/Color:Round/Warm White
  
• Screw or Spring Mounted: Spring
  
• Switch: No
  
• Touch Switch:No

• Cutout: 2 9/16"
  
• Rating: IP66
  
• Watts: 4W
  
• Input Voltage: 10-30V DC
  
• Bezel/Color: Round/Stainless
  
• Light/Color:Round/Warm White
  
• Screw or Spring Mounted: Spring
  
• Switch: No
  
• Touch Switch:No

• Cutout: 2 9/16"
  
• Rating: IP66
  
• Watts: 4W
  
• Input Voltage: 10-30V DC
  
• Bezel/Color: Round/Stainless
  
• Light/Color:Round/Daylight
  
• Screw or Spring Mounted: Spring
  
• Switch: No
  
• Touch Switch:No

• Cutout: 2 9/16"
  
• Rating: IP66
  
• Watts: 6W
  
• Input Voltage: 10-30V DC
  
• Bezel/Color: Round/Stainless
  
• Light/Color:Round/Daylight
  
• Screw or Spring Mounted: Screw
  
• Switch: No
  
• Touch Switch:No

• Cutout: 2 9/16"
  
• Rating: IP66
  
• Watts: 4W
  
• Input Voltage: 10-30V DC
  
• Bezel/Color: Round/Stainless
  
• Light/Color:Round/Warm White
  
• Screw or Spring Mounted: Screw
  
• Switch: No
  
• Touch Switch:No

• Cutout: 2 9/16"
  
• Rating: IP66
  
• Watts: 4W
  
• Input Voltage: 10-30V DC
  
• Bezel/Color: Round/Stainless
  
• Light/Color:Round/Daylight
  
• Screw or Spring Mounted: Screw
  
• Switch: No
  
• Touch Switch:No

• Cutout: 2 9/16"
  
• Rating: IP66
  
• Watts: 4W
  
• Input Voltage: 10-30V DC
  
• Bezel/Color: Square/White
  
• Light/Color:Square/Warm White
  
• Screw or Spring Mounted: Spring
  
• Switch: No
  
• Touch Switch:No

• Cutout: 2 9/16"
  
• Rating: IP66
  
• Watts: 6W
  
• Input Voltage: 10-30V DC
  
• Bezel/Color: Square/Stainless
  
• Light/Color:Round/Daylight
  
• Screw or Spring Mounted: Screw
  
• Switch: No
  
• Touch Switch:No

• Cutout: 2 9/16"
  
• Rating: IP66
  
• Watts: 4W
  
• Input Voltage: 10-30V DC
  
• Bezel/Color: Square/Stainless
  
• Light/Color:Square/Warm White
  
• Screw or Spring Mounted: Screw
  
• Switch: No
  
• Touch Switch:No

• Cutout: 2 9/16"
  
• Rating: IP66
  
• Watts: 4W
  
• Input Voltage: 10-30V DC
  
• Bezel/Color: Square/Stainless
  
• Light/Color:Round/Daylight
  
• Screw or Spring Mounted: Screw
  
• Switch: No
  
• Touch Switch:No

• Cutout: 2 9/16"
  
• Rating: IP66
  
• Watts: 4W
  
• Input Voltage: 10-30V DC
  
• Bezel/Color: Round/Stainless
  
• Light/Color:Round/Warm White
  
• Screw or Spring Mounted: Spring
  
• Switch: No
  
• Touch Switch:No

• Cutout: 2 9/16"
  
• Rating: IP66
  
• Watts: 4W
  
• Input Voltage: 10-30V DC
  
• Bezel/Color: Round/Satin
  
• Light/Color:Round/Warm White
  
• Screw or Spring Mounted: Spring
  
• Switch: No
  
• Touch Switch:No

• Cutout: 2 9/16"
  
• Rating: IP66
  
• Watts: 4W
  
• Input Voltage: 10-30V DC
  
• Bezel/Color: Round/White
  
• Light/Color:Round/Daylight
  
• Screw or Spring Mounted: Spring
  
• Switch: No
  
• Touch Switch:No

• Cutout: 2 9/16"
  
• Rating: IP66
  
• Watts: 6W
  
• Input Voltage: 10-30V DC
  
• Bezel/Color: Round/Stainless
  
• Light/Color:Round/Daylight
  
• Screw or Spring Mounted: Screw
  
• Switch: No
  
• Touch Switch:No

• Cutout: 2 9/16"
  
• Rating: IP66
  
• Watts: 4W
  
• Input Voltage: 10-30V DC
  
• Bezel/Color: Round/Stainless
  
• Light/Color:Round/Daylight
  
• Screw or Spring Mounted: Screw
  
• Switch: No
  
• Touch Switch:No

• Cutout: 2 9/16"
  
• Rating: IP66
  
• Watts: 4W
  
• Input Voltage: 10-30V DC
  
• Bezel/Color: Round/White
  
• Light/Color:Round/Warm White
  
• Screw or Spring Mounted: Screw
  
• Switch: No
  
• Touch Switch:No

• Cutout: 2 9/16"
  
• Rating: IP66
  
• Watts: 6W
  
• Input Voltage: 10-30V DC
  
• Bezel/Color: Square/Stainless
  
• Light/Color:Round/Warm White
  
• Screw or Spring Mounted: Spring
  
• Switch: No
  
• Touch Switch:No

• Cutout: 2 9/16"
  
• Rating: IP66
  
• Watts: 6W
  
• Input Voltage: 10-30V DC
  
• Bezel/Color: Square/Stainless
  
• Light/Color:Round/Daylight
  
• Screw or Spring Mounted: Spring
  
• Switch: No
  
• Touch Switch:No

• Cutout: 2 9/16"
  
• Rating: IP66
  
• Watts: 4W
  
• Input Voltage: 10-30V DC
  
• Bezel/Color: Square/Stainless
  
• Light/Color:Round/Warm White
  
• Screw or Spring Mounted: Spring
  
• Switch: No
  
• Touch Switch:No

• Cutout: 2 9/16"
  
• Rating: IP66
  
• Watts: 4W
  
• Input Voltage: 10-30V DC
  
• Bezel/Color: Square/Stainless
  
• Light/Color:Round/Daylight
  
• Screw or Spring Mounted: Spring
  
• Switch: No
  
• Touch Switch:No

• Cutout: 2 9/16"
  
• Rating: IP66
  
• Watts: 4W
  
• Input Voltage: 10-30V DC
  
• Bezel/Color: Square/White
  
• Light/Color:Round/Warm White
  
• Screw or Spring Mounted: Spring
  
• Switch: No
  
• Touch Switch:No

• Cutout: 2 9/16"
  
• Rating: IP66
  
• Watts: 6W
  
• Input Voltage: 10-30V DC
  
• Bezel/Color: Square/Stainless
  
• Light/Color:Round/Warm White
  
• Screw or Spring Mounted: Screw
  
• Switch: No
  
• Touch Switch:No

• Cutout: 2 9/16"
  
• Rating: IP66
  
• Watts: 6W
  
• Input Voltage: 10-30V DC
  
• Bezel/Color: Square/Stainless
  
• Light/Color:Round/Daylight
  
• Screw or Spring Mounted: Screw
  
• Switch: No
  
• Touch Switch:No

• Cutout: 2 9/16"
  
• Rating: IP66
  
• Watts: 6W
  
• Input Voltage: 10-30V DC
  
• Bezel/Color: Square/White
  
• Light/Color:Round/Daylight
  
• Screw or Spring Mounted: Screw
  
• Switch: No
  
• Touch Switch:No

• Cutout: 2 9/16"
  
• Rating: IP66
  
• Watts: 4W
  
• Input Voltage: 10-30V DC
  
• Bezel/Color: Square/Stainless
  
• Light/Color:Round/Warm White
  
• Screw or Spring Mounted: Screw
  
• Switch: No
  
• Touch Switch:No

• Cutout: 2 9/16"
  
• Rating: IP66
  
• Watts: 4W
  
• Input Voltage: 10-30V DC
  
• Bezel/Color: Square/Stainless
  
• Light/Color:Round/Daylight
  
• Screw or Spring Mounted: Screw
  
• Switch: No
  
• Touch Switch:No

• Cutout: 2 9/16"
  
• Rating: IP66
  
• Watts: 4W
  
• Input Voltage: 10-30V DC
  
• Bezel/Color: Square/Satin
  
• Light/Color:Round/Warm White
  
• Screw or Spring Mounted: Screw
  
• Switch: No
  
• Touch Switch:No

• Cutout: 2 9/16"
  
• Rating: IP66
  
• Watts: 4W
  
• Input Voltage: 10-30V DC
  
• Bezel/Color: Square/White
  
• Light/Color:Round/Warm White
  
• Screw or Spring Mounted: Screw
  
• Switch: No
  
• Touch Switch:No

• Cutout: 2 1/8"
  
• Rating: IP40
  
• Watts: 2W
  
• Input Voltage: 10-30V DC
  
• Bezel/Color: Square/Stainless
  
• Light/Color:Round/Warm White
  
• Screw or Spring Mounted: Spring
  
• Switch: Yes
  
• Touch Switch:No

SBC 1200 NRG+ Series Battery Charger - 12V - 100A - 3-Bank

The long experience we have in the nautical field has given us the ability to evolve the range of SBC battery chargers, now called NRG+, with superior performance to those currently on the market.

The advantages which the SBC NRG+ battery chargers offer, are:

• Three stage IUoU battery charging
• High efficiency
• Multiple outputs in order to charge more groups of batteries (MOSFET charge separator inside)
• Differentiated charging for open or sealed liquid electrolite, Gel, AGM, Optima®, Li-Ion Batteries
• Integrated output fuses inside the battery chargers (for each output)
• Capacity of supplying full power with low AC mains voltage
• Possibility to connect in parallel up to three battery chargers of the same model for current sharing by means of digital control
• Low residual fluctuation on output
• Universal AC supply input 264 ÷ 83 Vac, 45 ÷ 66 Hz
• Power factor equal to 1
• Compatible with the generators
• Short circuit, overloading, output overvoltage and overheating protection
• Can work in a wide range of ambient temperatures
• Variable speed for the cooling fan
• User interface via LEDs that signal the status, errors and the output current
• Backlit LCD terminal with multi-language interface (optional)
• Charge is compensated according to the temperature of the batteries (1 sensor supplied; more senors optional)

SBC 1100 NRG+ Series Battery Charger - 12V - 80A - 3-Bank

The long experience we have in the nautical field has given us the ability to evolve the range of SBC battery chargers, now called NRG+, with superior performance to those currently on the market.

The advantages which the SBC NRG+ battery chargers offer, are:

• Three stage IUoU battery charging
• High efficiency
• Multiple outputs in order to charge more groups of batteries (MOSFET charge separator inside)
• Differentiated charging for open or sealed liquid electrolite, Gel, AGM, Optima®, Li-Ion Batteries
• Integrated output fuses inside the battery chargers (for each output)
• Capacity of supplying full power with low AC mains voltage
• Possibility to connect in parallel up to three battery chargers of the same model for current sharing by means of digital control
• Low residual fluctuation on output
• Universal AC supply input 264 ÷ 83 Vac, 45 ÷ 66 Hz
• Power factor equal to 1
• Compatible with the generators
• Short circuit, overloading, output overvoltage and overheating protection
• Can work in a wide range of ambient temperatures
• Variable speed for the cooling fan
• User interface via LEDs that signal the status, errors and the output current
• Backlit LCD terminal with multi-language interface (optional)
• Charge is compensated according to the temperature of the batteries (1 sensor supplied; more senors optional)

SBC 700 NRG+ Series Battery Charger - 12V - 60A - 3-Bank

The long experience we have in the nautical field has given us the ability to evolve the range of SBC battery chargers, now called NRG+, with superior performance to those currently on the market.

The advantages which the SBC NRG+ battery chargers offer, are:

• Three stage IUoU battery charging
• High efficiency
• Multiple outputs in order to charge more groups of batteries
• Differentiated charging for open or sealed liquid electrolite, Gel, AGM, Optima®
• Integrated output fuses inside the battery chargers
• Capacity of supplying full power with low AC mains voltage
• Low residual fluctuation on output
• Power factor equal to 1
• Compatible with the generators
• Short circuit, overloading, output overvoltage and overheating protection
• Can work in a wide range of ambient temperatures
• Variable speed for the cooling fan
• User interface via LEDs that signal the status, errors and the output current
• Backlit LCD terminal with multi-language interface (optional)
• Charge is compensated according to the temperature of the batteries (1 sensor supplied; more senors optional)

SBC 500 NRG+ Series Battery Charger - 12V - 40A - 3-Bank

The long experience we have in the nautical field has given us the ability to evolve the range of SBC battery chargers, now called NRG+, with superior performance to those currently on the market.

The advantages which the SBC NRG+ battery chargers offer, are:

• Three stage IUoU battery charging
• High efficiency
• Multiple outputs in order to charge more groups of batteries
• Differentiated charging for open or sealed liquid electrolite, Gel, AGM, Optima®
• Integrated output fuses inside the battery chargers
• Capacity of supplying full power with low AC mains voltage
• Low residual fluctuation on output
• Power factor equal to 1
• Compatible with the generators
• Short circuit, overloading, output overvoltage and overheating protection
• Can work in a wide range of ambient temperatures
• Variable speed for the cooling fan

SBC 300 NRG+ Series Battery Charger - 12V - 30A - 3-Bank

The long experience we have in the nautical field has given us the ability to evolve the range of SBC battery chargers, now called NRG+, with superior performance to those currently on the market.

The advantages which the SBC NRG+ battery chargers offer, are:

• Three stage IUoU battery charging
• High efficiency
• Multiple outputs in order to charge more groups of batteries
• Differentiated charging for open or sealed liquid electrolite, Gel, AGM, Optima®
• Integrated output fuses inside the battery chargers
• Capacity of supplying full power with low AC mains voltage
• Low residual fluctuation on output
• Power factor equal to 1
• Compatible with the generators
• Short circuit, overloading, output overvoltage and overheating protection
• Can work in a wide range of ambient temperatures
• Variable speed for the cooling fan

SBC 250 NRG+ Series Battery Charger - 12V - 25A - 3-Bank

The long experience we have in the nautical field has given us the ability to evolve the range of SBC battery chargers, now called NRG+, with superior performance to those currently on the market.

The advantages which the SBC NRG+ battery chargers offer, are:

• Three stage IUoU battery charging
• High efficiency
• Multiple outputs in order to charge more groups of batteries
• Differentiated charging for open or sealed liquid electrolite, Gel, AGM, Optima®
• Integrated output fuses inside the battery chargers
• Capacity of supplying full power with low AC mains voltage
• Low residual fluctuation on output
• Power factor equal to 1
• Compatible with the generators
• Short circuit, overloading, output overvoltage and overheating protection
• Can work in a wide range of ambient temperatures
• Variable speed for the cooling fan

SBC 140 NRG+ Series Battery Charger - 12V - 12A - 2-Bank

The long experience we have in the nautical field has given us the ability to evolve the range of SBC battery chargers, now called NRG+, with superior performance to those currently on the market.

The advantages which the SBC NRG+ battery chargers offer, are:

• Three stage IUoU battery charging
• High efficiency
• Multiple outputs in order to charge more groups of batteries
• Differentiated charging for open or sealed liquid electrolite, Gel, AGM, Optima®
• Integrated output fuses inside the battery chargers
• Capacity of supplying full power with low AC mains voltage
• Low residual fluctuation on output
• Power factor equal to 1
• Compatible with the generators
• Short circuit, overloading, output overvoltage and overheating protection
• Can work in a wide range of ambient temperatures
• Variable speed for the cooling fan

Quick Pocket Transmitter

Features:

• Number of keys - 4
• Power supply - CR2450 3V litio alkaline-battery
• Microcontroller-operated functions
• FSK modulation and carrier frequency 913Mhz
• Operating temperatures from -15°C to +70°C
• Possibility to control more receivers with one transmitter
• Two functions can be activated at the same time
• Floating

Quick Radio Remote Control Receiver 913Mhz

Features

• Number of relays - 4
• Full power range (from 10.5 to 31Vdc)
• Relay current carrying capacity - 15 A
• Power absorption in stand-by mode - 25 mA
• Microcontroller-operated functions
• FSK modulation and carrier frequency 913Mhz
• Operating temperatures from -15°C to +70°C
• Indication of the system operating status, errors and problems by means
  of LED and seven-segment display
• Protection against polarity inversion
• Protection against low battery
• 50 transmitters can be stored
• Translation mode to activate more receivers, installed in different
  spots, by means of one transmitter
• Programmable digital filter

• Number of relays - 2
  
• Full power range (from 10.5 to 31Vdc).
  
• Relay current carring capacity - 15 A
  
• Power absorption in stand-by mode - 25 mA
  
• Microcontroller-operated functions.
  
• FSK modulation and carrier frequency 913Mhz
  
• Operating temperatures from -15°C to +70°C
  
• Indication of the system operating status, errors and problems by means of LED and seven-segment display
  
• Protection against polarity inversion
  
• Protection against low battery
  
• 50 transmitters can be stored
  
• Translation mode to activate more receivers, installed in different spots, by means of one transmitter
  
• Programmable digital filter

T6415-12 Reversing Solenoid 12V Unit for Windlass Motors

The Quick T6415 is a reversing contactor that is able to operate electric motors for windlasses and capstans. Due to the external connections, this unit is very easy to install. The casing of this unit is IP66 waterproof. This unit is sold complete with the solenoid unit and product sheet.

GP2 2000 Horizontal Windlass - 800W - 12 V - 5/16" Drum

The GP2 2000 is a horizontal windlass application windlass that is perfect for boats with limited space in the anchor locker. This unit comes equipped with an enclosed motor and an epicyclical gearbox. The casing is composed of plastic composite material for the 800 W unit. This unit also has a manual freefall capability for quick anchoring. The unit is sold complete with the windlass, solenoid unit, clutch handle, mounting hardware, and user manual.

Features:

• Windlasses are equipped with an epicyclical gearbox that provides much higher efficiency (+40% compared to equivalent traditional gearboxes)

Specifications:

• Weight: 32 lbs.
• Dimensions: 17 × 17 × 12 in.
• Drum: Yes
• Gypsy Size: 5/16 in. (7.94 mm)
• Series: Genius
• Freefall: No
• Voltage: 12V
• Motor Power 800W
• Motor Supply Voltage: 12 V 
• Maximum Pull: 1984 lb.
• Maximum Working Load: 772 lb.
• Working Load: 265 lb.
• Current Absorption at Working Load (1): 76 A 
• Maximum Chain Speed (2): 97..1 ft/min
• Maximum Chain Speed at Working Load (2): 65.9 ft/min
• Weight – Mini Genius with Drum: 25.3 lb.

AL3 Vertical Windlass with Drum - 1500W - 12 V - 5/16" Drum

The AL3 is a vertical application windlass with a drum, perfect for boats with limited deck space. This unit is composed of anodized aluminum in hard oxide, which is a durable element when dealing with harsh marine environments. It comes in different variations, such as with or without the drum capstan for rope retrieval, as well as various gypsy sizes for rope and chain retrieval. Equipped with an emergency manual lift system, you can easily retrieve your anchor during instances when you may lose battery power on your boat. 

Features: 

• Include an IP67 watertight motor 
• An anodized aluminum gearbox 
• An easy-to-open inspection lid 
• This package is sold complete with the windlass, solenoid unit, clutch handle, and mounting hardware

Specifications:

• Weight: 54 lbs.
• Dimensions: 17 × 17 × 12 in.
• Drum: Yes
• Gypsy Size: 5/16 in. (8 mm)
• Series: Aleph
• Voltage: 12V
• Wattage: 1500W
• Motor Supply Voltage: 12 V 
• Maximum Pull: 2426 lb.
• Maximum Working Load: 1191 lb.
• Working Load: 397 lb.
• Current Absorption at Working Load (1): 85 A 
• Maximum Chain Speed (2): 98 ft/min
• Maximum Chain Speed at Working Load (2): 63 ft/min
• Weight – Mini Genius with Drum: 49 lb.

Prince DP3 1012 Windlass - 1000W - 12V - 10mm (3/8") Gypsy

This Quick Prince windlass is a vertical-axis windlass.

Application:

• For boats 10-14 m (33-46 ft.)

Features:

• No drum
• Vertical windlasses
• Stainless steel Aisi 316 base and anodized aluminum in hard oxide
• Rope and chain on a single gypsy
• Integrated sensor and a magnet for chain counter
• Manual Free-Fall system
• Supplied with pressure lever
• Inspection lid
• Motor watertight to IP67
• Technopolymer Gearbox (1000W)

Specifications:

• Rope: 5/8 in. (15,8 mm)
• Motor Power: 1000 W
• Motor Supply Voltage: 12 V
• Maximum Pull: 1000 Kg / 2204 lb
• Maximum working load    370 Kg / 816 lb    
• Working Load: 120 Kg / 264 lb
• Current Absorption @ Working Load: 140 A
• Maximum Chain Speed: 39,6 m/min / 129.2 ft/min
• Maximum Chain Speed @ Working Load: 20,4 m/min / 66.9 ft/min
• Weight - DP3 - [without drum]: 17,4 Kg / 38 lb

Anchor Rode 20’ - 7mm Chain - 100’ - 1/2" 3 Plait Rope

An anchor-rode is the connection system between the anchor and the boat and its sturdiness during mooring is undoubtedly essential. The critical point is the splice where the rope and chain are connected. Quick has developed a slim splice system that is much slimmer and more tapered, preventing jamming which often occurs during the transition from rope to chain during anchoring. Quick Slim Splice consists of a calibrated chain and a top-quality 3-strand polyester rope, to guarantee optimum strength and life.

Anchor Rode 25’ - 8mm Chain - 200’ - 9/16" 3 Plait Rope

An anchor-rode is the connection system between the anchor and the boat and its sturdiness during mooring is undoubtedly essential. The critical point is the splice where the rope and chain are connected. Quick has developed a slim splice system that is much slimmer and more tapered, preventing jamming which often occurs during the transition from rope to chain during anchoring. Quick Slim Splice consists of a calibrated chain and a top-quality 3-strand polyester rope, to guarantee optimum strength and life.

Bow Thruster BTQ 110-25 25KGF - 12V - D110 - 1.3kW

Better Performances, Lower Absorption

The 4-blade Propellers guarantee maximum thrust performance and reduction in current absorption. They are made of composite materials, resistant in every condition. The counter-rotating system offers better thrust performances. The two props have been designed to suit left side and right side, to guarantee the same upper performances in both directions.

Features:

• The Gearbox is created so that the behavior of the propeller is unaffected in either direction.
• The bronze propeller gearleg is provided with a hydrodynamic profile that minimizes turbulence.
• Maintenance is not required since the special highly resistant components guarantee a perfect lubrication seal for life.
• The anodic aluminum protection is easily replaceable. In case of total corrosion of the anode, the prop doesn’t get lost because it’s fixed directly to the pod, independently from the anode.
• The elastic joint that optimizes the alignment between motor and gearbox is an exclusive Quick design. This acts as an even tension device, preserving the operating system from impulses from the bow thruster, with above-average results.

The Motors

New-generation materials have been chosen to constantly guarantee required output and maximum performance, given the severe conditions required by the application.

Top Safety

In case of relays’ melting, the TMS remote circuit breaker system switch-off the power to the motor from any place where a TDC panels or a TSC emergency mushroom panels are installed. Motor temperature sensor BTQ motors don’t need the thermic sensor to be able to always provide the maximum power when needed. The overheating protection is controlled by the software inside the touch panel or the joystick panel.

Bow Thruster BTQ 125-30 30KGF - 12V - D125 - 1.5kW

Better Performances, Lower Absorption

The 4-blade Propellers guarantee maximum thrust performance and reduction in current absorption. They are made of composite materials, resistant in every condition. The counter-rotating system offers better thrust performances. The two props have been designed to suit left side and right side, to guarantee the same upper performances in both directions.

Features:

• The Gearbox is created so that the behavior of the propeller is unaffected in either direction.
• The bronze propeller gearleg is provided with a hydrodynamic profile that minimizes turbulence.
• Maintenance is not required since the special highly resistant components guarantee a perfect lubrication seal for life.
• The anodic aluminum protection is easily replaceable. In case of total corrosion of the anode, the prop doesn’t get lost because it’s fixed directly to the pod, independently from the anode.
• The elastic joint that optimizes the alignment between motor and gearbox is an exclusive Quick design. This acts as an even tension device, preserving the operating system from impulses from the bow thruster, with above-average results.

The Motors

New-generation materials have been chosen to constantly guarantee required output and maximum performance, given the severe conditions required by the application.

Top Safety

In case of relays’ melting, the TMS remote circuit breaker system switch-off the power to the motor from any place where a TDC panels or a TSC emergency mushroom panels are installed. Motor temperature sensor BTQ motors don’t need the thermic sensor to be able to always provide the maximum power when needed. The overheating protection is controlled by the software inside the touch panel or the joystick panel.

Bow Thruster BTQ 125-40 40KGF - 12V - D125 - 2.2kW

Better Performances, Lower Absorption

The 4-blade Propellers guarantee maximum thrust performance and reduction in current absorption. They are made of composite materials, resistant in every condition. The counter-rotating system offers better thrust performances. The two props have been designed to suit left side and right side, to guarantee the same upper performances in both directions.

Features:

• The Gearbox is created so that the behavior of the propeller is unaffected in either direction.
• The bronze propeller gearleg is provided with a hydrodynamic profile that minimizes turbulence.
• Maintenance is not required since the special highly resistant components guarantee a perfect lubrication seal for life.
• The anodic aluminum protection is easily replaceable. In case of total corrosion of the anode, the prop doesn’t get lost because it’s fixed directly to the pod, independently from the anode.
• The elastic joint that optimizes the alignment between motor and gearbox is an exclusive Quick design. This acts as an even tension device, preserving the operating system from impulses from the bow thruster, with above-average results.

The Motors

New-generation materials have been chosen to constantly guarantee required output and maximum performance, given the severe conditions required by the application.

Top Safety

In case of relays’ melting, the TMS remote circuit breaker system switch-off the power to the motor from any place where a TDC panels or a TSC emergency mushroom panels are installed. Motor temperature sensor BTQ motors don’t need the thermic sensor to be able to always provide the maximum power when needed. The overheating protection is controlled by the software inside the touch panel or the joystick panel.

Bow Thruster BTQ 140-30 30KGF - 12V - D140 - 1.5kW

Better Performances, Lower Absorption

The 4-blade Propellers guarantee maximum thrust performance and reduction in current absorption. They are made of composite materials, resistant in every condition. The counter-rotating system offers better thrust performances. The two props have been designed to suit left side and right side, to guarantee the same upper performances in both directions.

Features:

• The Gearbox is created so that the behavior of the propeller is unaffected in either direction.
• The bronze propeller gearleg is provided with a hydrodynamic profile that minimizes turbulence.
• Maintenance is not required since the special highly resistant components guarantee a perfect lubrication seal for life.
• The anodic aluminum protection is easily replaceable. In case of total corrosion of the anode, the prop doesn’t get lost because it’s fixed directly to the pod, independently from the anode.
• The elastic joint that optimizes the alignment between motor and gearbox is an exclusive Quick design. This acts as an even tension device, preserving the operating system from impulses from the bow thruster, with above-average results.

The Motors

New-generation materials have been chosen to constantly guarantee required output and maximum performance, given the severe conditions required by the application.

Top Safety

In case of relays’ melting, the TMS remote circuit breaker system switch-off the power to the motor from any place where a TDC panels or a TSC emergency mushroom panels are installed. Motor temperature sensor BTQ motors don’t need the thermic sensor to be able to always provide the maximum power when needed. The overheating protection is controlled by the software inside the touch panel or the joystick panel.

Bow Thruster BTQ 140-40 40KGF - 12V - D140 - 2.2kW

Better Performances, Lower Absorption

The 4-blade Propellers guarantee maximum thrust performance and reduction in current absorption. They are made of composite materials, resistant in every condition. The counter-rotating system offers better thrust performances. The two props have been designed to suit left side and right side, to guarantee the same upper performances in both directions.

Features:

• The Gearbox is created so that the behavior of the propeller is unaffected in either direction.
• The bronze propeller gearleg is provided with a hydrodynamic profile that minimizes turbulence.
• Maintenance is not required since the special highly resistant components guarantee a perfect lubrication seal for life.
• The anodic aluminum protection is easily replaceable. In case of total corrosion of the anode, the prop doesn’t get lost because it’s fixed directly to the pod, independently from the anode.
• The elastic joint that optimizes the alignment between motor and gearbox is an exclusive Quick design. This acts as an even tension device, preserving the operating system from impulses from the bow thruster, with above-average results.

The Motors

New-generation materials have been chosen to constantly guarantee required output and maximum performance, given the severe conditions required by the application.

Top Safety

In case of relays’ melting, the TMS remote circuit breaker system switch-off the power to the motor from any place where a TDC panels or a TSC emergency mushroom panels are installed. Motor temperature sensor BTQ motors don’t need the thermic sensor to be able to always provide the maximum power when needed. The overheating protection is controlled by the software inside the touch panel or the joystick panel.

Bow Thruster BTQ 185-55 55KGF - 12V - D185 - 3.0kW

Better Performances, Lower Absorption

The 4-blade Propellers guarantee maximum thrust performance and reduction in current absorption. They are made of composite materials, resistant in every condition. The counter-rotating system offers better thrust performances. The two props have been designed to suit left side and right side, to guarantee the same upper performances in both directions.

Features:

• The Gearbox is created so that the behavior of the propeller is unaffected in either direction.
• The bronze propeller gearleg is provided with a hydrodynamic profile that minimizes turbulence.
• Maintenance is not required since the special highly resistant components guarantee a perfect lubrication seal for life.
• The anodic aluminum protection is easily replaceable. In case of total corrosion of the anode, the prop doesn’t get lost because it’s fixed directly to the pod, independently from the anode.
• The elastic joint that optimizes the alignment between motor and gearbox is an exclusive Quick design. This acts as an even tension device, preserving the operating system from impulses from the bow thruster, with above-average results.

The Motors

New-generation materials have been chosen to constantly guarantee required output and maximum performance, given the severe conditions required by the application.

Top Safety

In case of relays’ melting, the TMS remote circuit breaker system switch-off the power to the motor from any place where a TDC panels or a TSC emergency mushroom panels are installed. Motor temperature sensor BTQ motors don’t need the thermic sensor to be able to always provide the maximum power when needed. The overheating protection is controlled by the software inside the touch panel or the joystick panel.

TCD2022 Thruster Push Button Control

The traditional TCD/WCD/TSC controls have been renewed. The updated design matches the style of the QNC Quick Nautical Control commands, which feature a glossy black tempered glass panel.

The TCD/WCD/TSC controls differ from the QNC range in the choice of materials, in fact, they feature a special and scratch-resistant glossy Lexan instead of the tempered glass.

The fixing method is different as well: the traditional screws have been replaced by a special 3M VHB double-sided gasket which allows for faster installation.

The technical and operating characteristics of the TCD/WCD/TSC controls are identical to the previous models.

Anchor Rode 25’ - 8mm Chain - 300’ - 9/16" Rope

An anchor-rode is the connection system between the anchor and the boat and its sturdiness during mooring is undoubtedly essential. The critical point is the splice where the rope and chain are connected. Quick has developed a slim splice system that is much slimmer and more tapered, preventing jamming which often occurs during the transition from rope to chain during anchoring. Quick Slim Splice consists of a calibrated chain and a top-quality 3-strand polyester rope, to guarantee optimum strength and life.

Balder 2 Windlass - 900W 1/4" Chain & 1/2" Rope Below Deck

Features:

• 900W Motor 12V
• 1/4" Chain and 1/2" Rope
• Boat Lenght: 16-29FT
• Horizontal windlasses
• Maximum flexibility of installation
• AISI 316 Stainless steel and chromed bronze
• Integrated sensor and magnet for chain counter
• Rope and chain on a single gypsy
• Automatic system of anchor-rode free-fall
• Supplied with the chain guide device
• Supplied with pressure lever, Mounting Bracket, T6315-12 solenoid

8M Cable for TCD Controller

Quick 8-meter Extension Cable specifically for Thruster Control Panel. 

The Quick TCDEX08 cable extension is 8 meters long and suitable for Quick bow thruster and stern thruster control panels and switches: TCD, TMS, and TSC.

TF130 Fuse 130 Amp for BTQ110-25 Thruster

Quick High Amp Fuse for Thruster, 130 Amp - TF130. High amperage fuses for bow thruster installations.

Specifications:

• Amperage: 130 Amp
• Type: TF
• Package Quantity: 1
• Material: Plastic/Copper
• Color: White

TF225 Fuse 225 Amp for BTQ125-30 & BTQ140-40 Thruster

Quick High Amp Fuse for Thruster, 225A - TF225. High amperage fuses for bow thruster installations.

Specifications:

•  Amperage: 225 Amp
• Type: TF
• Package Quantity: 1
• Material: Plastic/Copper
• Color: White

TF150 Fuse 150 Amp for BTQ140-30 Thruster

Quick High Amp Fuse for Thruster, 150A - TF150. High amperage fuses for bow thruster installations.

Specifications:

• Amperage: 150 Amp
• Type: TF
• Package Quantity: 1
• Material: Plastic/Copper
• Color: White

TF250 Fuse 250 Amp for BTQ185-55 Thruster

Quick High Amp Fuse for Thruster, 250A - TF250. High amperage fuses for bow thruster installations.

Specifications:

• Amperage: 250 Amp
• Type: TF
• Package Quantity: 1
• Material: Plastic/Copper
• Color: White

TF325 Fuse 325 Amp for BTQ125-40 Thruster

Quick High Amp Fuse for Thruster, 325A - TF325. High amperage fuses for bow thruster installations.

Specifications:

• Amperage: 325 Amp
• Type: TF
• Package Quantity: 1
• Material: Plastic/Copper
• Color: White

Prince DP2 512 Windlass Only - 500W - 12V - 1/4" Gypsy - 1/2" Rope

The DP2 is a vertical application windlass perfect for boats with limited deck space. This unit is composed of AISI 316 stainless steel which is a durable element when dealing with harsh marine environments. It comes in different variations such as with or without the drum capstan for rope retrieval and various gypsy sizes for rope and chain retrieval.

Specifications:

• Series: Prince
• Wattage: 500W
• Voltage: 12V
• Drum: No
• Dimensions: 17" x 17" x 11"
• Gypsy Size: 1/4"/7mm
• Rope Size: 1/2"

*Windlass Only

QNC CHC Chain Counter

QNC CHC is a complete and reliable tool to remotely operate the windlass and check the length of the lowered chain by means of the color graphic display. The panel surface is completely black tempered glass.

Features:

• Automatic descent function
• Up alarm function
• Anchor weighing function in case of sensor failure.
• Windlass management with auto-free fall.
• Display the lowered chain length, in meters, feet, and fathom.
• Glass front
• Extremely thin profile
• Capacitive keys
• High brightness 3.5” color graphic display
• Multilingual user interface
• Power supply 12/24 Vdc
• Functioning over a wide range of environmental temperatures
• Protection rating IP67
• CAN bus Communication Interface

Ted CT Downlight - 2W - SS Round Touch - Warm

The Ted Club Touch is an IP40 recessed Power LED downlight. It has a 72mm round trim composed of AISI 316 stainless steel and a frosted lens.

Specifications:

• Weight: 0.25 lbs.
• Dimensions: 0.25 × 0.25 × 0.25 in
• Trim Finish: Stainless steel
• Power Type: Constant voltage
• Light Source: 1 x high luminosity
• Supply: 10 - 30 V
• Power Consumption: 2 W
• Current Consumption: 0.09 A @ 24V
• Average Lifetime: 50,000 hours
• Dimmable: Yes
• IP Security degree: 40
• Frame Diameter: 2-53/74″
• Recess: 5/8"
• Hole Diameter: 2-1/8"
• Frame Material: AISI 316 stainless steel 
• Light Color: Warm
• Mounting: Screws

Warm White Specifications:

• Angle: 100°
• Light Flow: 105 lm    
• Efficiency: 58 lm/W   
• Light Beam – Distance 1 m: Diameter 2.43 m / 40.8 lux    
• Light Beam- Distance 2 m: Diameter 4.85 m / 10.2 lux    
• Light Beam- Distance 3 m: Diameter 7.28 m / 4.5 lux  

Prince DP3 1012 Windlass - 1000W - 12V - 8mm (5/16") Gypsy

This Quick Prince windlass is a vertical-axis windlass.

Application:

• For boats 10-14 m (33-46 ft.)

Features:

• No drum
• Vertical windlasses
• Stainless steel Aisi 316 base and anodized aluminum in hard oxide
• Rope and chain on a single gypsy
• Integrated sensor and a magnet for chain counter
• Manual Free-Fall system
• Supplied with pressure lever
• Inspection lid
• Motor watertight to IP67
• Technopolymer Gearbox (1000W)

Specifications:

• Rope: 1/2 in. (12,7 mm) - 9/16 in. (14,2 mm) - 5/8 in. (15,8 mm)
• Motor Power: 1000 W
• Motor Supply Voltage: 12 V
• Maximum Pull: 1000 Kg / 2204 lb
• Maximum working load    370 Kg / 816 lb    
• Working Load: 120 Kg / 264 lb
• Current Absorption @ Working Load: 140 A
• Maximum Chain Speed: 39,6 m/min / 129.2 ft/min
• Maximum Chain Speed @ Working Load: 20,4 m/min / 66.9 ft/min
• Weight - DP3 - [without drum]: 17,4 Kg / 38 lb

ZDIM100 LED Dimmer - 10-30V DC - Up to 50W on 12V & Up to 100W on 24V

Quick lighting dimmers have been specially studied to adjust the light intensity of the LED devices of the range. Reliable and precise, they allow control over one or more LED light sources. For use on the multi-bulb LED downlights.

Replacement Propeller for Left Handed BTQ 185-55, BTQ 185-75 & BTQ 185-95 Bow Thruster

This replacement propeller is for Quick BTQ 185-55, BTQ 185-75 & BTQ 185-95 Bow Thruster. Please note that this propeller is a left-hand propeller.

Features:

• 5 propeller blade

*Please note that an anode is not included.

Replacement Propeller for D140 Bow Thruster - Right Side

This is a right-side replacement propeller for Quick’s BTQ 140-40 and BTQ 140-30 Bow Thruster.

Features:

• 5 propeller blade

*Please note that an anode is not included.

Edwin C Downlight LED - 2W, IP66, Screw Mounted - Square Stainless Bezel, Square Warm White Light

The Edwin is an IP40 recessed LED downlight. It has a 72mm square trim composed of AISI 316 stainless steel and a frosted lens. All Quick lights are two-wire dimmable.

Specifications:

• Cutout: 2 1/8"
• Rating: IP40
• Watts: 2W
• Input Voltage: 10-30V DC
• Bezel/Color: Square/stainless
• Light/Color: Square/Warm White
• Screw or Spring Mounted: Screw
• Switch: No
• Touch Switch: No

TCD2042 Thruster Joystick Control

The traditional TCD/WCD/TSC controls have been renewed. The updated design matches the style of the QNC Quick Nautical Control commands, which feature a glossy black tempered glass panel.

The TCD/WCD/TSC controls differ from the QNC range in the choice of materials they feature a special and scratch-resistant glossy Lexan instead of the tempered glass.

The fixing method is different as well: the traditional screws have been replaced by a special 3M VHB double-sided gasket, which allows for faster installation.

The technical and operating characteristics of the TCD, WCD, and TSC controls are identical to those of the previous models.

Features:

• A special 3M VHB double-sided gasket that allows for a faster installation
• Made of scratch-resistant glossy Lexan

HRC1004 4 Button Remote Control

HRC Quick Handheld is a multipurpose remote with 4 buttons. This remote is constructed with rubber inserts to ensure high strength, long durability, perfect watertightness, and a secure grip. HRC remote controls are supplied complete with a connecting cable extensible up to 4.2 meters, a watertight deck plug and socket, and a support bracket for stowing after use.

Applications

Designed for the remote operation of various on-board electrically operated equipment such as cranes, gangways, windlasses, sea ladders, etc.

Features:

• Watertight
• 4 buttons

HRC1004L 4-Button Remote with LED Light

The main innovation of the multipurpose HRC hand-held remote control is the built-in LED lamp, which facilitates operation in the dark. This is the only hand-held remote in the nautical sector with this exclusive feature.

HRC multipurpose hand-held remote controls are designed for the remote operation of various on-board electrically operated equipment such as cranes, gangways, windlasses, sea ladders, etc. HRC is constructed with rubber inserts to ensure high strength, long durability, perfect watertightness, and a secure grip.

HRC Remote Controls Are Supplied Complete With:

• A connecting cable is extensible up to 4.2 m.
• A watertight deck plug and socket
• A support bracket for stowing after use
• Built-in LED lamp
• HRC units are maintenance-free

Kai XP Downlight LED - 6W, IP66, Spring Mounted - Round Stainless Bezel, Round Warm White Light

The Kai is a recessed power LED downlight. It has an 80mm square trim composed of AISI 316 stainless steel and a frosted lens. All Quick lights are two-wire dimming.

Specifications:

• Cutout: 2-9/16"
• Rating: IP66
• Watts: 6W
• Input Voltage: 10-30V DC
• Bezel/Color: Round/stainless
• Light/Color: Round/warm white
• Screw or Spring Mounted: Spring
• Switch: No
• Touch Switch: No

HRC1002L 2 Button Remote Control with LED

Multipurpose watertight handheld remote control with integrated LED lamp.

The main innovation of the multipurpose HRC hand-held remote control is the built-in LED lamp, facilitating operation in the dark. This is the only hand-held remote in the nautical sector with this exclusive feature.

HRC multipurpose hand-held remote controls are designed for remote operation of various on-board electrically operated equipment such as cranes, gangways, windlasses, sea ladders, etc. HRC is constructed with rubber inserts to ensure high strength, long durability, perfect watertightness, and a secure grip.

Features:

• A connecting cable extensible up to 4.2M
• A watertight deck plug and socket
• A support bracket for stowing after use
• Built-in LED lamp
• HRC units are maintenance-free