RAM Zinc Coated U-Bolt Base with 1" Ball

The RAM motorcycle handlebar base contains a 1" rubber ball designed to sit at right angles to the mounting rail. The zinc coated metal u-bolt accommodates rails in diameter from 0.5" to 1.25" in diameter. The base also includes black cover caps to be placed over the exposed ends of the u-bolt.

U-Bolt Dimensions:
Accommodates rails from 0.5" to 1.25" in diameter.

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
1" Rubber Ball "B" Size

RAM MOUNT ZINC COATED U-BOLT BASE W/ 1" BALL

The RAM Locking Knob includes a brass 1/4"-20 thread, for 1" (B size) socket arms; this allowing you to disengage the screwing of the knob. Once you have set your mount in the location you need, you can lock it in place and feel safe that your mounted device will stay right where you left it.

Material:
Powder coated marine grade aluminum

Note:
The "U" in the part number reflects product packaged in poly bag.


RAM MOUNT KNOB W/ KEYED LOCK AND 1/4" - 20 BRASS HOLE

The powder coated marine grade aluminum base contains a 1" diameter rubber ball connected at right angles to a 1.25" x 2.5" inch diamond plate. The base has two holes 1.912" from center to center, positioned at both ends of the diamond base.

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
1" Rubber Ball "B" Size


RAM MOUNT BASE W/ BALL 2-7/16" X 1-5/16"

The (RAM-B-202U) RAM marine grade aluminum base contains a 1" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern.

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
1" Rubber Ball "B" Size


RAM MOUNT 2-7/16" DIAMETER BASE W/ 1" BALL

The RAM-D-202U consists of a 2.25" diameter rubber ball, connected at right angles to a 3.68" diameter round plate. The plate has pre-drilled holes in the base plate, including two holes at 180 degrees and three holes at 120 degrees.

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
2.25" Rubber Ball "D" Size


RAM MOUNT 3.68" DIAMETER BASE W/ 2.25" D SIZE BALL

The RAM-B-201U powder coated marine grade aluminum 6.88" double socket arm allow for connnection to a 2.25" diameter ball. Socket technology allows for almost infinite adjustment and perfect viewing angles.

Dimensions:
Overall Length: 8.375"
Socket-To-Socket Length: 6.5625"

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
2.25" Rubber Ball "D" Size


RAM MOUNT DOUBLE SOCKET ARM F/ 2.25" D SIZE BALLS

This RAM high strength composite cradle is designed to hold the following devices:
Garmin nuvi 300
Garmin nuvi 310
Garmin nuvi 350
Garmin nuvi 360
Garmin nuvi 370

Material:
High Strength Composite

Note:The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

RAM MOUNT CRADLE FOR GARMIN NUVI 300 SERIES

This RAM high strength composite cradle is designed to hold the following devices:
Garmin StreetPilot c530
Garmin StreetPilot c550
Garmin StreetPilot c580
Garmin StreetPilot i2
Garmin StreetPilot i3

Material:
High Strength Composite

Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

Notice:
THIS MOUNT IS NOT INTENDED FOR HIGH VIBRATION APPLICATIONS SUCH AS MOTORCYCLE OR OFF ROAD USE. FOR HEAVY DUTY APPLICATIONS APPLY PVC PLUMBING GLUE TO RAM-HOL-GA22 ADAPTOR PRIOR TO ASSEMBLY. NOTE: ONCE GLUED THE MOUNT WILL BE PERMANENT.



RAM MOUNT G BALL CRADLE FOR GARMIN I SERIES NUVI 200/700

This RAM high strength composite cradle is designed to hold the following devices:
Garmin nuvi 200
Garmin nuvi 205
Garmin nuvi 250
Garmin nuvi 255
Garmin nuvi 260
Garmin nuvi 270

Material:
High Strength Composite

Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

RAM MOUNT CRADLE FOR GARMIN NUVI 2XX SERIES

This RAM high strength composite cradle is designed to hold the following devices:
Garmin nuvi 200w
Garmin nuvi 205w
Garmin nuvi 250w
Garmin nuvi 255w
Garmin nuvi 260w
Garmin nuvi 265wt

Material:
High Strength Composite

Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

RAM MOUNT CRADLE FOR GARMIN NUVI 2XXW SERIES

This RAM high strength composite cradle is designed to hold the following devices:
Garmin nuvi 710
Garmin nuvi 750
Garmin nuvi 755T
Garmin nuvi 760
Garmin nuvi 765T
Garmin nuvi 770
Garmin nuvi 775T
Garmin nuvi 780
Garmin nuvi 785T

Material:
High Strength Composite

Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

RAM MOUNT CRADLE FOR GARMIN NUVI 7XX SERIES

This RAM high strength composite cradle is designed to hold the following devices:
Garmin nuvi 800
Garmin nuvi 850
Garmin nuvi 880
Garmin nuvi 885T

Material:
High Strength Composite

Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.


RAM MOUNT CRADLE FOR GARMIN NUVI 880 AND 850

This RAM high strength composite cradle is designed to hold the following devices:
Garmin nuvi 500
Garmin nuvi 550

Material:
High Strength Composite

Note:The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

RAM MOUNT CRADLE FOR GARMIN NUVI 500

This RAM high strength composite cradle is designed to hold the following devices:
Garmin nuvi 1200
Garmin nuvi 1250
Garmin nuvi 1260T

Material:
High Strength Composite

Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

RAM MOUNT CRADLE FOR GARMIN NUVI 1200

This RAM high strength composite cradle is designed to hold the following devices:
Garmin nuvi 1300
Garmin nuvi 1350
Garmin nuvi 1350T
Garmin nuvi 1370T
Garmin nuvi 1390T

Material:
High Strength Composite

Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

RAM MOUNT CRADLE FOR GARMIN NUVI 1300

This RAM high strength composite cradle is designed to hold the following devices:
Garmin nuvi 1490T

Material:
High Strength Composite

Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

RAM MOUNT CRADLE FOR GARMIN NUVI 1490

This RAM high strength composite cradle is designed to hold the following devices:
Garmin nuvi 1690

Material:
High Strength Composite

Ball Size:
1" Rubber Ball "B" Size

RAM MOUNT CRADLE F/ GARMIN NUVI 1690

This RAM high strength composite cradle is designed to hold the following devices:
Garmin nuvi 3750
Garmin nuvi 3760T
Garmin nuvi 3790T

Features:
1. Easy access to ports
2. Pocket for factory vehicle dock
3. Roller design for super smooth placement and removal of the GPS

Material:
High Strength Composite

Ball Size:
1" Rubber Ball "B" Size

RAM MOUNT CRADLE F/ GARMIN NUVI 3700 SERIES

RAM-A-CAN II
Universal Cup Holder Mount w/ 6" Flex Arm

At RAM, "mount anything anywhere" means just that. We pride ourselves on utilizing the most convenient of spaces and our latest cup holder mounting platform puts your favorite pocket size device as close as your morning coffee. Easy to reach, easy to use, and no drilling, gluing, or sticking required, just plug and go. This simple and attractive design affords a 6" flex mounting feature. Perfect for supporting an iPhone, GPS, Cell Phone, PDA, or iPod just to name a few, you’ll have no trouble finding great new ways to use this product. A durable composite shell construction and soft fins that can be trimmed to fit makes our cup holder mount one of the most portable and versatile "Go Anywhere" products offered.

Material:
High Strength Composite

RAM MOUNT RAM A CAN 2 UNIVERSAL CUP HOLDER MOUNT

The RAM combination handlebar and brake/clutch reservoir base provides the ultimate flexibility for mounting to your motorcycle. Mount to either your handlebar or brake/clutch, almost infinite adjustment and perfect viewing angles are provided in this kit

Hardware:
Standard or metric thread stainless steel bolts, provided in the kit. The zinc coated metal u-bolt accommodates rails in diameter from 0.50" to 1.25" in diameter.

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
1" Rubber Ball "B" Size


RAM MOUNT CLUTCH BREAK UBOLT COMBO HANDLEBAR KIT

RAM U-Bolt Mount w/Chrome

The stainless steel u-bolt base makes attaching to handlebars, tubing, or railing a breeze. Simple to install and easy to use, the possibilities become endless. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your device is safe, secure, and within easy reach. RAM’s patented design also dampens shock and vibration helping to extend the life of your mobile device. Included in this package is hardware that accommodates rails from 0.50" to 1" in diameter.

Material:
Chrome Finish

Ball Size:
1" Rubber Ball "B" Size

Note:
The "U" in the part number reflects product packaged in poly bag. This product comes with stainless steel hardware, making the mount rust proof.

RAM MOUNT U BOLT MOUNT W/ CHROME

The RAP-B-166-2U is a low profile, light weight and secure suction cup mount that is perfect for securing electronic devices in your mobile environment. Simply attach the suction cup base to the windshield of your vehicle for an easy and safe way to view your electronic device in your vehicle. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials ensure your electronic device is safe, secure, and within easy reach. RAMs design also dampens shock and vibration helping to extend the life of your mobile device.

RAM MOUNT COMPOSITE SUCTION CUP MOUNT W/ DIAMOND BASE

RAM 3.3" Diameter Suction Cup Base with Twist Lock

The RAP-224-1U, suction cup twist lock base contains a standard RAM double hole diamond shaped end. The 3.3" diameter suction cup is designed to have an extra strong hold on any smooth non-porous surface, but for best result, mount the suction cup on a glass surface. The diamond shaped end has two holes 1.912" from center to center. This will connect to RAM-B-238 Diamond Plates Series, the universal industry standard AMPS hole pattern or directly to the back of the RAM Composite HOL Cradles. This suction base DOES NOT have a RAM 1" rubber connection ball.

Material:
High Strength Composite

Ball Size:
1" Rubber Ball "B" Size

RAM MOUNT 3.3" SUCTION CUP BASE W/ TWIST LOCK

Minimalists in design yet incredibly useful is the RAM Lil’ Buddy mount. Using an adhesive disk, put the Lil’ Buddy practically anywhere you want to keep your portable electronics easy to see and always within your reach. Designed with a very small foot print, finding a home on your dash or console is easy. Deciding what you want to mount may be a tough decision though. With so many uses, your iPhone, Blackberry, Palm, or MP3 player can be perfectly matched and supported by your new best friend, the RAM Lil’ Buddy. Also, for all you Garmin folks, note that the ball on the Lil’ Buddy will snap right into the ball receiver on your GPS.

The Lil’ Buddy attaches directly to any Garmin GPS Personal Navigation Device with factory mounting bracket that accommodates the Garmin "G-Ball". This mount rotates 180 degrees.

The RAM Lil’ Buddy mount is compatible with the following Garmin GPS Personal Navigation Devices:
nuvi 2xx
nuvi 2xxW
nuvi 3xx
nuvi 6xx series
nuvi 7xx series
nuvi 8xx series
StreetPilot i3
StreetPilot i5

Material:
High Strength Composite

Note:
Purchase of product does not include Garmin GPS device or factory mounting bracket. The "U" in the part number reflects product packaged in poly bag.

RAM MOUNT LIL BUDDY W/ GARMIN BALL REQUIRES GARMIN G BALL

The RAM-B-316-1-202U, universal RAM-POD I vehicle mount, consists of a RAM 1" diameter ball and socket system, connected to a 18" long flexible rod. The base consists of a 2.5" diameter round plate with universal AMPS hole patten end. This RAM POD I allows you to mount a light to medium weight item in a car safely and securely.

Installation Instructions:
At right angles to the base of the flexible 18" long leg is a foot with a mounting hole. Simply place the hole into the passenger seat mounting bolt and adjust the mount to the required height with the flexible leg. The rigid flexible arm will hold everything you need safely and securely.

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
1" Rubber Ball "B" Size

RAM MOUNT RAM POD I WITH 1" SINGLE SOCKET W/ 202

RAM POD I, universal No-Drill vehicle mount, for the Apple iPad. The base mounts to your seat rail without any drilling necessary. Connected to the base is a 18" rigid flexible rod that can be bent to position your device to it’s optimum viewing location. The RAM POD I will hold everything you need safely and securely.

This mount is designed to hold the following devices:
Apple iPad Wi-Fi 16GB, 32GB and 64GB
Apple iPad Wi-Fi + 3G 16GB, 32GB and 64GB

Material:
High Strength Composite & Powder Coated Marine Grade Aluminum

Ball Size:
1" Rubber Ball "B" Size

RAM MOUNT APPLE IPAD HOLDER W/ RAM POD I MOUNT

RAM POD I, universal No-Drill vehicle mount with locking cradle, for the Apple iPad. The base mounts to your seat rail without any drilling necessary. Connected to the base is a 18" rigid flexible rod that can be bent to position your device to it’s optimum viewing location. The RAM POD I will hold everything you need safely and securely.

This mount is designed to hold the following devices:
Apple iPad Wi-Fi 16GB, 32GB and 64GB
Apple iPad Wi-Fi + 3G 16GB, 32GB and 64GB

Locking Cradle Features:
1. Easy access to electronic ports
2. Dial combination lock
3. (4 qty) mounting points with pre-drilled holes, including the universal AMPS hole pattern.

Material:
High Strength Composite & Powder Coated Marine Grade Aluminum

Ball Size:
1" Rubber Ball "B" Size

RAM MOUNT APPLE IPAD LOCKING HOLDER W/ RAM POD I MOUNT

RAM Seat-Mate vehicle mount for the Apple iPad. Compact, portable, amazingly strong and no tools required are words that best describe the RAM Seat-Mate. Able to transform most any passenger seat into a workstation, simply unpack the mount from the compact bag, unfold the legs, and buckle it in. Truly innovative in design, this product is able to actively hold onto the seat and stabilize itself. For anyone who needs a temporary mobile workstation, this mounting solution is absolutely perfect.

This mount is designed to hold the following devices:
Apple iPad Wi-Fi 16GB, 32GB and 64GB
Apple iPad Wi-Fi + 3G 16GB, 32GB and 64GB

Material:
High Strength Composite & Powder Coated Marine Grade Aluminum

Ball Size:
1" Rubber Ball "B" Size

RAM MOUNT APPLE IPAD HOLDER W/ SEAT-MATE MOUNT

RAM Seat-Mate vehicle mount for the Apple iPad. Compact, portable, amazingly strong and no tools required are words that best describe the RAM Seat-Mate. Able to transform most any passenger seat into a workstation, simply unpack the mount from the compact bag, unfold the legs, and buckle it in. Truly innovative in design, this product is able to actively hold onto the seat and stabilize itself. For anyone who needs a temporary mobile workstation, this mounting solution is absolutely perfect.

This mount is designed to hold the following devices:
Apple iPad Wi-Fi 16GB, 32GB and 64GB
Apple iPad Wi-Fi + 3G 16GB, 32GB and 64GB

Locking Cradle Features:
1. Easy access to electronic ports
2. Dial combination lock
3. (4 qty) mounting points with pre-drilled holes, including the universal AMPS hole pattern.

Material:
High Strength Composite & Powder Coated Marine Grade Aluminum

Ball Size:
1" Rubber Ball "B" Size

RAM MOUNT APPLE IPAD LOCKING HOLDER W/ SEAT-MATE MOUNT

The RAM Tough-Tray is spring loaded expandable tray that can accommodate 10 to 16 inch wide laptops. The tray includes four (4) side clamping arm with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS, PDAs or other electronics.

Tough-Tray Dimensions:
Tray Depth: 10.0"
Tray Thickness: 2.125"
Tray Width (Expansion): 10" to 16"
Side Clamp Arm Height: 0.5" (min) to 1.75" (max)

Material:
High Strength Composite

Note:
Part number reflects product packaged in clear clam shell for store shelf display. The Tough-Tray is compatible with laptops that have 17" screens. If the Tough-Tray Laptop Cradle is intended to hold a laptop or device while the vehicle is in motion, we recommend the Secure-n-Motion kit.

RAM MOUNT RAM UNIVERSAL LAPTOP MOUNT TOUGH TRAY

Well thought out and compact designs are common place at RAM and our new RAM Tough-Tray II is no exception. Spring loaded to create just the right amount of holding force, most tablets, UMPC?s, and compact laptops can be made safe and secure while on the go. Simple to install and adjust retaining arms insure a perfect fit without interfering with ports or functions. Also, if a compact laptop is in place, these retaining arms hold firm with the screen up or down. Ideally suited to a multitude of applications, and easily attached to hundreds of mounting systems for cars, boats, planes, and more, compact devices just work better in the universal tablet holder from RAM.

Dimensions:
Tray Depth: 6.0"
Tray Thickness: 1"
Tray Width (Expansion): 8.56" to 12.31"
Side Clamp Arm Height: 2.75" max

Included With Purchase:
(1) Laptop Tray
(4) Standard Retaining Arms
(4) Flat Retaining Arms (Allow for laptops to close while in the tray)

RAM MOUNT UNIVERSAL LAPTOP MOUNT TOUGH TRAY II

Vehicle Base - Ford Excursion F250 F350
Ford Excursion (2000-2005)
Ford Excursion Eddie Bauer (2000-2005)
Ford F-250, F-350, F-450, F-550, F-650 & F-750 Super Duty Trucks (1999-2010)
Ford F-350 Super Duty Trucks (1997)

Placement of Mount:
Passenger side floor, in front of seat

Drilling Requirements:
No - uses existing seat bolts

Seat Configuration:
Bucket/bench
Pole:
Purchased Separately

Weight:
9.4 lbs.

Material:
Powder Coated Steel

Features:
Step feature allows optimized placement of mount with a minimal amount of intrusion of passenger space. Quick installation with no drilling needed. Rock solid construction with a lifetime warranty.

Notes:
For the Ford Excursion Limited and Eddie Bauer, the heater duct prevents access to the inner seat stud. Carpeting will have to be lifted and the heat duct cut and plugged. This will prevent air travel to the passenger side right rear. Air will still flow to the rear via other ducts. One Offset Universal Mount step is included with this vehicle base. In the Ford Excursion Limited and Eddie Bauer editions, the heater duct prevents access to left seat stud. The mount can be used by removing the carpet and plugging the heater duct.

RAM MOUNT NO DRILL VEHICLE BASE FORD EXCURSION F250 F350

Vehicle Base Ford F-150 (2004-2010)
Ford F-150 (2004-2010)
Lincoln Mark LT (2005-Newer)

Placement of Mount:
Passenger side floor board, under seat

Drilling Requirements:
No - uses existing seat bolts

Seat Configuration:
Bucket/bench

Pole:
Purchased Separately

Weight:
9.1 lbs.

Material:
Powder Coated Steel

Features:
Quick installation with no drilling needed. Rock solid construction with a lifetime warranty.

Note:
If you are installing this product into a 2009-2010 F-150 with the slide out cup holder, the RAM-VB-109A is the preferred kit. The standard RAM-VB-109 kit will install but limit the use of the cup holder. To use the RAM-VB-109 with the slide out cup holder, pull the cup holder all the way out if you plan to use it prior to installation. Once installed, the cup holder will not be able to slide back under the center console. The RAM-VB-109A has an adjustable riser that can be positioned so that the cup holder is not interfered with. For base model trucks without the slide out cup holder, the standard RAM-VB-109 kit is ideal.

RAM MOUNT NO DRILL VEHICLE BASE 2004-NEWER FORD F150

No-Drill - Vehicle Base

Compatible Vehicles:
Chevrolet Avalanche (2007-Newer)
Chevrolet Silverado (2007-Newer)
Chevrolet Suburban (2007-Newer)
Chevrolet Suburban (deluxe power seats) (2007-Newer)
Chevrolet Tahoe (front bucket seats only) (2007-Newer)
GMC Sierra (2007-Newer)
GMC Yukon (2007-Newer)
Hummer H2 (2003-Newer)

Placement of Mount:
Passenger side floor board, in front of seat

Drilling Requirements:
No - attaches to seat studs

Seat Configuration:
Bucket

Pole:
Purchased Separately

Weight:
7 lbs.

Material:
Powder Coated Steel

Features:
Quick installation with no drilling needed. Rock solid construction with a lifetime warranty

RAM MOUNT NO DRILL VEHICLE BASE 2007-NEWER CHEVY TAHOE

Vehicle Base - Chevy Trucks 2006-Newer
GMC Sierra (deluxe power seats) (2000-2006)
GMC Yukon (deluxe power seats) (2000-2006)
Chevrolet Silverado (deluxe power seats) (1999-2006)
Chevrolet Suburban (deluxe power seats) (2000-2006)
Chevrolet 2500 & 3500 c/k series truck (deluxe power seats) (2000-2006)
Chevrolet Avalanche (2000-2006)

Placement of Mount:
Passenger side on the floor, in front of seat

Drilling Requirements:
No - uses existing seat bolts

Seat Configuration:
Bucket

Pole:
Purchased Separately

Weight:
6.8 lbs.

Material:
Powder Coated Steel

Dimensions:
Hole Center = 15"

Notes:
Installs in minutes with no drilling required. Won’t interfere with levers or factory-installed console or 4WD lever.

Features:
Quick installation with no drilling needed. Rock solid construction with a lifetime warranty.

RAM MOUNT NO DRILL VEHICLE BASE 2006-OLDER CHEVY TRUCKS

Vehicle Base 2011 F-250, 350, 450, Etc.
FORD EXCURSION (2000-2005)
FORD EXCURSION LIMITED (2000-2005)
FORD F-250 CREW CAB (2011)
FORD F-250 SUPER CAB (2011)
FORD F-350 CREW CAB (2011)
FORD F-350 SUPER CAB (2011)
FORD F-450 CREW CAB (2011)
FORD F-550 (2011)
FORD F-650 (2011)
FORD F-750 (2011)

Placement of Mount:
Passenger side floor board, in front of seat

DRILLING REQUIREMENTS:
No - attaches to seat studs

Seat Configuration:
Bucket

Pole:
Purchased Separately

Material:
Powder Coated Steel


RAM MOUNT NO DRILL VEHICLE BASE 2011 F-250 F-350 +

Vehicle Base - Ford Excursion F250 F350
Ford Excursion (2000-2005)
Ford Excursion Eddie Bauer (2000-2005)
Ford F-250, F-350, F-450, F-550, F-650 & F-750 Super Duty Trucks (1999-2010)
Ford F-350 Super Duty Trucks (1997)
Placement of Mount:
Passenger side floor, in front of seat

Drilling Requirements:
No - uses existing seat bolts

Seat Configuration:
Bucket/bench

Pole:
Purchased Separately

Weight:
9.4 lbs.

Material:
Powder Coated Steel

Features:
Step feature allows optimized placement of mount with a minimal amount of intrusion of passenger space. Quick installation with no drilling needed. Rock solid construction with a lifetime warranty.

The RAM Tough-Tray is spring loaded expandable tray that can accommodate 10 to 16 inch wide laptops. The tray includes four (4) side clamping arm with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS, PDAs or other electronics.

Tough-Tray Dimensions:
Tray Depth: 10.0"
Tray Thickness: 2.125"
Tray Width (Expansion): 10" to 16"
Side Clamp Arm Height: 0.5" (min) to 1.75" (max)

Material:
High Strength Composite

The RAM RAM-VP-SW1-89, combination swing arm/tele-pole system, will connect to any RAM vehicle base without a welded female tele-pole. Included is a tele-pole with a height range from 11.5" to 17"; it can be easily adjusted by turning the knob at the top of the post. Once the knob has been tightened, the tele-pole becomes a rigid support for any RAM cradle, holder or Tough-Tray.

The double swing arm with rotating plate, allows you to twist and tilt the viewing angle of your laptop, tablet, UMPC, monitor, or any other connected electronic device, when mounted on your RAM Vehicle Mount. Taking the highly successful RAM Vehicle Mounts to the next level, this rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 12".

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
1.5" Rubber Ball "C" Size


RAM MOUNT NO DRILL VEHICLE SYSTEM FORD 99-10 FORD F-250 +

Vehicle Base 2011 F-250, 350, 450, Etc.
Ford F-250 XL (2012)
Ford F-250 King Ranch (2012)
Ford F-250 Lariat (2012)
Ford F-250 XLT (2012)
Ford F-350 King Ranch (2012)
Ford F-350 Lariat (2012)
Ford F-350 XL (2012)
Ford F-350 XLT (2012)
Ford F-450 King Ranch (2012)
Ford F-450 Lariat (2012)
Ford F-450 XL (2012)
Ford F-450 XLT (2012)
Ford F-250 Crew Cab (2011)
Ford F-250 Super Cab (2011)
Ford F-350 Crew Cab (2011)
Ford F-350 Super Cab (2011)
Ford F-450 Crew Cab (2011)
Ford F-550 (2011)
Ford F-650 (2011)
Ford F-750 (2011)
Ford Excursion (2000-2005)
Ford Excursion Limited (2000-2005)


Placement of Mount:
Passenger side floor board, in front of seat

DRILLING REQUIREMENTS:
No - attaches to seat studs

Seat Configuration:
Bucket

Pole:
Purchased Separately

Material:
Powder Coated Steel

The RAM Tough-Tray is spring loaded expandable tray that can accommodate 10 to 16 inch wide laptops. The tray includes four (4) side clamping arm with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS, PDAs or other electronics.

Tough-Tray Dimensions:
Tray Depth: 10.0"
Tray Thickness: 2.125"
Tray Width (Expansion): 10" to 16"
Side Clamp Arm Height: 0.5" (min) to 1.75" (max)

Material:
High Strength Composite

The RAM RAM-VP-SW1-89, combination swing arm/tele-pole system, will connect to any RAM vehicle base without a welded female tele-pole. Included is a tele-pole with a height range from 11.5" to 17"; it can be easily adjusted by turning the knob at the top of the post. Once the knob has been tightened, the tele-pole becomes a rigid support for any RAM cradle, holder or Tough-Tray.

The double swing arm with rotating plate, allows you to twist and tilt the viewing angle of your laptop, tablet, UMPC, monitor, or any other connected electronic device, when mounted on your RAM Vehicle Mount. Taking the highly successful RAM Vehicle Mounts to the next level, this rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 12".

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
1.5" Rubber Ball "C" Size


RAM MOUNT NO DRILL VEHICLE SYSTEM 2011 FORD F250 F350 +

Vehicle Base Ford F-150 (2004-2010)
Ford F-150 (2004-2010)
Lincoln Mark LT (2005-Newer)

Placement of Mount:
Passenger side floor board, under seat

Drilling Requirements:
No - uses existing seat bolts

Seat Configuration:
Bucket/bench

Pole:
Purchased Separately

Weight:
9.1 lbs.

Material:
Powder Coated Steel

Features:
Quick installation with no drilling needed. Rock solid construction with a lifetime warranty.

The RAM Tough-Tray is spring loaded expandable tray that can accommodate 10 to 16 inch wide laptops. The tray includes four (4) side clamping arm with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS, PDAs or other electronics.

Tough-Tray Dimensions:
Tray Depth: 10.0"
Tray Thickness: 2.125"
Tray Width (Expansion): 10" to 16"
Side Clamp Arm Height: 0.5" (min) to 1.75" (max)

Material:
High Strength Composite


The RAM RAM-VP-SW1-89, combination swing arm/tele-pole system, will connect to any RAM vehicle base without a welded female tele-pole. Included is a tele-pole with a height range from 11.5" to 17"; it can be easily adjusted by turning the knob at the top of the post. Once the knob has been tightened, the tele-pole becomes a rigid support for any RAM cradle, holder or Tough-Tray.

The double swing arm with rotating plate, allows you to twist and tilt the viewing angle of your laptop, tablet, UMPC, monitor, or any other connected electronic device, when mounted on your RAM Vehicle Mount. Taking the highly successful RAM Vehicle Mounts to the next level, this rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 12".

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
1.5" Rubber Ball "C" Size

RAM MOUNT NO DRILL VEHICLE SYSTEM 04-10 FORD F150

Vehicle Base - Chevy Tahoe
Chevrolet Avalanche (2007-Newer)
Chevrolet Silverado (2007-Newer)
Chevrolet Suburban (2007-Newer)
Chevrolet Suburban (deluxe power seats) (2007-Newer)
Chevrolet Tahoe (front bucket seats only) (2007-Newer)
GMC Sierra (2007-Newer)
GMC Yukon (2007-Newer)
Hummer H2 (2003-Newer)

Placement of Mount:
Passenger side floor board, in front of seat

Drilling Requirements:
No - attaches to seat studs

Seat Configuration:
Bucket

Pole:
Purchased Separately

Weight:
7 lbs.

Material:
Powder Coated Steel


Quick installation with no drilling needed. Rock solid construction with a lifetime warranty

The RAM Tough-Tray is spring loaded expandable tray that can accommodate 10 to 16 inch wide laptops. The tray includes four (4) side clamping arm with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS, PDAs or other electronics.

Tough-Tray Dimensions:
Tray Depth: 10.0"
Tray Thickness: 2.125"
Tray Width (Expansion): 10" to 16"
Side Clamp Arm Height: 0.5" (min) to 1.75" (max)

Material:
High Strength Composite

The RAM RAM-VP-SW1-89, combination swing arm/tele-pole system, will connect to any RAM vehicle base without a welded female tele-pole. Included is a tele-pole with a height range from 11.5" to 17"; it can be easily adjusted by turning the knob at the top of the post. Once the knob has been tightened, the tele-pole becomes a rigid support for any RAM cradle, holder or Tough-Tray.

The double swing arm with rotating plate, allows you to twist and tilt the viewing angle of your laptop, tablet, UMPC, monitor, or any other connected electronic device, when mounted on your RAM Vehicle Mount. Taking the highly successful RAM Vehicle Mounts to the next level, this rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 12".

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
1.5" Rubber Ball "C" Size

RAM MOUNT NO DRILL VEHICLE SYSTEM 07 NEWER CHEVY TAHOE

Vehicle Base - Chevy Trucks 2006-Newer
GMC Sierra (deluxe power seats) (2000-2006)
GMC Yukon (deluxe power seats) (2000-2006)
Chevrolet Silverado (deluxe power seats) (1999-2006)
Chevrolet Suburban (deluxe power seats) (2000-2006)
Chevrolet 2500 & 3500 c/k series truck (deluxe power seats) (2000-2006)
Chevrolet Avalanche (2000-2006)

Placement of Mount:
Passenger side on the floor, in front of seat

Drilling Requirements:
No - uses existing seat bolts

Seat Configuration:
Bucket

Pole:
Purchased Separately

Weight:
6.8 lbs.

Material:
Powder Coated Steel

Dimensions:
Hole Center = 15"

Notes:
Installs in minutes with no drilling required. Won’t interfere with levers or factory-installed console or 4WD lever.

Features:
Quick installation with no drilling needed. Rock solid construction with a lifetime warranty.

The RAM Tough-Tray is spring loaded expandable tray that can accommodate 10 to 16 inch wide laptops. The tray includes four (4) side clamping arm with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS, PDAs or other electronics.

Tough-Tray Dimensions:
Tray Depth: 10.0"
Tray Thickness: 2.125"
Tray Width (Expansion): 10" to 16"
Side Clamp Arm Height: 0.5" (min) to 1.75" (max)

Material:
High Strength Composite

The RAM RAM-VP-SW1-89, combination swing arm/tele-pole system, will connect to any RAM vehicle base without a welded female tele-pole. Included is a tele-pole with a height range from 11.5" to 17"; it can be easily adjusted by turning the knob at the top of the post. Once the knob has been tightened, the tele-pole becomes a rigid support for any RAM cradle, holder or Tough-Tray.

The double swing arm with rotating plate, allows you to twist and tilt the viewing angle of your laptop, tablet, UMPC, monitor, or any other connected electronic device, when mounted on your RAM Vehicle Mount. Taking the highly successful RAM Vehicle Mounts to the next level, this rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 12".

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
1.5" Rubber Ball "C" Size


RAM MOUNT NO DRILL VEHICLE SYSTEM 2006 OLDER CHEVY TAHOE

RAM screen support with spring loaded keeper; this allows it to travel smoothly with the screen through numerous viewing angles. Stores easily when not in use.

Dimensions:
Total Length: 8.75"
Point Pivot to the end: 8"

Material:
High Stength Composite

RAM MOUNT LAPTOP SCREEN SUPPORT SYSTEM

Until now, security features on laptop cradles have been difficult to use or simply get in the way of productivity. RAM has turned all that into a memory with the Secure-n-Motion security package. You can either purchase your laptop mounting system with this option or purchase it at a later date; this package easily integrates into an existing system. Regardless of which option you choose, you?ll have peace of mind knowing your laptop will stay put even under the most adverse conditions. Using a keyed locking knob and slim restraining arms, operation is simple, easy, and extremely secure. The perfect compliment to your RAM Laptop Mounting System, we encourage you to consider this security package.

Included in Kit:
4 (QTY) Front & Rear Retaining Arms
1 (QTY) Locking System for Laptop Tray

RAM MOUNT SECURE N MOTION KIT

RAM is proud to introduce the latest addition to the RAM product line, the RAM Safe-T-Charge battery protection system. The RAM Safe-T-Charge is feature rich and affordable making it the best choice in protecting your vehicle or boat’s electrical system and battery. With multiple configurations available through onboard dip switches, the Safe-T-Charge can be configured to shut down connected devices either by a trigger coming from the ignition of the vehicle or by sensing a drop in the DC voltage below a level capable of starting your engine. Easily select a predetermined duration of time to have your connected devices shut down to assure you will always be able to start your vehicle. The RAM Safe-T-Charge offers a audible tone starting five minutes before the timer shuts off power to your devices, and continuing every minute until the power is shut down. The on board over-ride switch enables the user to by pass the timed shut off feature in the case of an emergency or other event which requires immediate access to device power.

Dimensions:
L x W x H = (95 mm/3.74") x (80mm/3.15") x (32mm/1.26")

Materials:
ABS, flame retardant plastic construction

Features:
1. Water-proof for use in marine environments
2. 30AMP Rating
3. 24V jump start protection

Specifications:
1. Battery + 12V input terminal
2. Output terminal (More outputs can be connected by overlapping the wires and fastening.)
3. Ground terminal
4. IGN terminal
5. Over ride switch
6. Timer start LED
7. Selector for DC or IGN sense
8. 3-dip switch for time set
9. Mounting holes
10. Sticker on turning cover for indication of time setting


RAM MOUNT VEHICLE CHARGE PROTECT SAFE T CHARGE

The RAM RAM-234K1-4U, flat side keepers, attach to the RAM-234-3 RAM Tough Tray. The side keepers allow for your laptop to close completely while in the RAM Tough Tray.

Material:
High Strength Composite

Note:
Part number reflects product packaged in clear clam shell for store shelf display.

RAM MOUNT UNIVERSAL LAPTOP TRAY SIDE KEEPERS QTY 4

Vehicle Base

Compatible Vehicles:
DODGE RAM 1500-5500 (2008-NEWER)

Placement of Mount:
Passenger side, front, where seat rail frame attaches to floor board.

DRILLING REQUIREMENTS:
No - attaches to seat studs

Seat Configuration:
Bucket

Pole:
Purchased Separately

Weight:
2.1 lbs.

Material:
Powder Coated Steel

Dimensions:
A = 14.75", B = 3.8", C = 1.75", Hole Center = 13.25"

Features:
Quick installation with no drilling needed. Rock solid construction with lifetime warranty. Low profile keeps mount away from passenger leg space. Won?t interfere with levers or factory-installed console or 4WD lever. Designed to accommodate trucks with PTO

RAM MOUNT NO DRILL VEHICLE BASE DODGE 1500-5500 2008 NEW

Vehicle Base

Compatible Vehicles:
DODGE RAM 1500-5500 (2008-NEWER)

Placement of Mount:
Passenger side, front, where seat rail frame attaches to floor board.

DRILLING REQUIREMENTS:
No - attaches to seat studs

Seat Configuration:
Bucket

Pole:
Purchased Separately

Weight:
2.1 lbs.

Material:
Powder Coated Steel

Dimensions:
A = 14.75", B = 3.8", C = 1.75", Hole Center = 13.25"

Features:
Quick installation with no drilling needed. Rock solid construction with lifetime warranty. Low profile keeps mount away from passenger leg space. Won?t interfere with levers or factory-installed console or 4WD lever. Designed to accommodate trucks with PTO

Swing Arm
The RAM RAM-VP-SW1-89, combination swing arm/tele-pole system, will connect to any RAM vehicle base without a welded female tele-pole. Included is a tele-pole with a height range from 11.5" to 17"; it can be easily adjusted by turning the knob at the top of the post. Once the knob has been tightened, the tele-pole becomes a rigid support for any RAM cradle, holder or Tough-Tray.

The double swing arm with rotating plate, allows you to twist and tilt the viewing angle of your laptop, tablet, UMPC, monitor, or any other connected electronic device, when mounted on your RAM Vehicle Mount. Taking the highly successful RAM Vehicle Mounts to the next level, this rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 12".

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
1.5" Rubber Ball "C" Size

Note:
Part number reflects product packaged in clear clam shell for store shelf display.

Laptop Mount Tray
The RAM Tough-Tray is spring loaded expandable tray that can accommodate 10 to 16 inch wide laptops. The tray includes four (4) side clamping arm with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS, PDAs or other electronics.

Tough-Tray Dimensions:
Tray Depth: 10.0"
Tray Thickness: 2.125"
Tray Width (Expansion): 10" to 16"
Side Clamp Arm Height: 0.5" (min) to 1.75" (max)

Material:
High Strength Composite

Note:
Part number reflects product packaged in clear clam shell for store shelf display. The Tough-Tray is compatible with laptops that have 17" screens. If the Tough-Tray Laptop Cradle is intended to hold a laptop or device while the vehicle is in motion, we recommend the Secure-n-Motion kit.


RAM MOUNT NO DRILL VEHICLE SYS DODGE 1500-5500 2008 NEWER

• 1 ea Laptop Screen Disabler USB Dongle
  
• 1 ea Installation CD with Detailed Instructions
  
• 1 ea 1’ Cable that Travels with the Laptop
  
• 1 ea 5’ Remote Cable for In Vehicle Installation
  
• 1 ea USB Dongle Bracket
  
• 2 ea Velcro Dots for Temporarily Securing the Dongle to the Laptop Lid
  
• 2 ea Self Adhesive Clips for Cable Management
  
• 2 cable Ties for Cable Management
  
  RAM MOUNT RAM SCREEN DISABLE SYSTEM

Compatible Vehicles:
Chevrolet Impala Police Package (2006-2011)

Placement of Mount:
Passenger side on the floor, under front seat

Drilling Requirements:
No-uses existing seat leg clips. For added support base can also be drilled to floor board.

Seat Configuration:
Bucket

Weight:
9 lbs.

Material:
Powder Coated Steel

Features:
Quick installation with no drilling needed. Rock solid construction with a lifetime warranty.

RAM MOUNT NO DRILL VEHICLE BASE CHEVROLET IMPALA POLICE

Compatible Vehicles:
Chevrolet Impala Police Package (2006-2011)

This No-Drill™ Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough Tray™ is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens). The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics.

Material:
High Strength Composite and Powder Coated Steel

Notes:
If the Tough-Tray™ Laptop Cradle is intended to hold a laptop or device while the vehicle is in motion, we recommend the Secure-N-Motion™ kit

RAM MOUNT NO DRILL VEHICLE SYS CHEVY IMPALA POLICE 06-11

Compatible Vehicles:
Dodge Avenger (2007-2010)
Dodge Caliber (2007-2009)

Placement of Mount:
Passenger side, front, where seat rail frame attaches to floor board.

Drilling Requirements:
No - attaches to seat studs

Seat Configuration:
Bucket

Weight:
4.5 lbs.

Material:
Powder Coated Steel

Features:
Quick installation with no drilling needed.

RAM MOUNT NO DRILL VEHICLE BASE DODGE CALIBER/AVENGER

Compatible Vehicles:
Dodge Avenger (2007-2010)
Dodge Caliber (2007-2009)

This No-Drill™ Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough Tray™ is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens). The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics.

Material:
Powder Coated Steel

Notes:
If the Tough-Tray™ Laptop Cradle is intended to hold a laptop or device while the vehicle is in motion, we recommend the Secure-N-Motion™ kit.

RAM MOUNT NO DRILL VEHICLE SYS DODGE CALIBER/AVENGER

Compatible Vehicles:
Ford Edge (2007-2011)

Placement of Mount:
Passenger side on the floor, under front seat

Drilling Requirements:
No - attaches to seat studs

Seat Configuration:
Bucket

Material:
Powder Coated Steel

Weight:
6 lbs.

Features:
Quick installation with no drilling needed


RAM MOUNT NO DRILL VEHICLE BASE FORD EDGE 07-11

Compatible Vehicles:
Ford Edge (2007-2011)

This No-Drill™ Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough Tray™ is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens). The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics.

Material:
High Strength Composite and Powder Coated Steel

Notes:
If the Tough-Tray™ Laptop Cradle is intended to hold a laptop or device while the vehicle is in motion, we recommend the Secure-N-Motion™ kit.

RAM MOUNT NO DRILL VEHICLE SYS FORD EDGE 07-11

Compatible Vehicles:
Freightliner Trucks
International Trucks
Kenworth Trucks
Mack Trucks
Peterbilt Trucks
Volvo Trucks

Placement of Mount:
Passenger side on the floor, under front seat

Drilling Requirements:
No - attaches to seat studs

Seat Configuration:
Bucket/Bench

Material:
Powder Coated Steel

Weight:
10.8 lbs.

Features:
Quick installation with no drilling needed.

Notes:
If the heater box is under the seat, the installer may need to drill holes in the base to accommodate vehicle mounting holes or studs. Also, the heater box may cause the system to sit higher than normal. Pole may be cut down by installer to lower kit. This will not void the warranty. May not work with swivel style seats for big rigs.

RAM MOUNT NO DRILL UNIVERSAL VEHICLE BASE SEMI TRUCKS

Compatible Vehicles:
Freightliner Trucks
International Trucks
Kenworth Trucks
Mack Trucks
Peterbilt Trucks
Volvo Trucks

This No-Drill™ Big Rig Laptop Stand installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough Tray™ is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens). The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics.

Material:
High Strength Composite and Powder Coated Steel

Notes:
If the heater box is under the seat, the installer may need to drill holes in the base to accommodate vehicle mounting holes or studs. Also, the heater box may cause the system to sit higher than normal. Pole may be cut down by installer to lower kit. This will not void the warranty. May not work with swivel style seats for big rigs

If the Tough-Tray™ Laptop Cradle is intended to hold a laptop or device while the vehicle is in motion, we recommend the Secure-N-Motion™ kit.

RAM MOUNT NO DRILL UNIVERSAL VEHICLE SYSTEM SEMI TRUCKS

Compatible Vehicles:
Dodge Charger Police Car (2006-2010)
Dodge Magnum Police Car (2006-2011)

Placement of Mount:
Passenger side, front, where seat rail frame attaches to floor board

Drilling Requirements:
No - uses existing seat bolts

Seat Configuration:
Bucket

Weight:
3.4 lbs.

Material:
Powder Coated Steel

Features:
Quick installation with no drilling needed. Rock solid construction with a lifetime warranty.

RAM MOUNT NO DRILL VEHICLE BASE DODGE CHARGE POLICE PACK

Compatible Vehicles:
Dodge Charger Police Car (2006-2010)
Dodge Magnum Police Car (2006-2011)

This No-Drill™ Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough Tray™ is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens). The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics.

Material:
High Strength Composite and Powder Coated Steel

Notes:
If the Tough-Tray™ Laptop Cradle is intended to hold a laptop or device while the vehicle is in motion, we recommend the Secure-N-Motion™ kit.

RAM MOUNT NO DRILL VEHICLE SYS DODGE CHARGE/MAGNUM POLICE

RAM Seat-Mate Description:
Compact, portable, amazingly strong and no tools required are words that best describe the new RAM Seat-Mate. Able to transform most any passenger seat into a workstation, simply unpack the mount from the compact bag, unfold the legs, and buckle it in. Truly innovative in design, this product is able to actively hold onto the seat and stabilize itself. For anyone who needs a temporary mobile workstation, this mounting solution is absolutely perfect. Designed to easily pack into a travel bag, suit case, or even under the seat of a vehicle, RAM makes it possible to create a comfortable workspace in minutes where ever your job takes you. The RAM Seat-Mate is perfect for laptops, tablets, and UMPCs. The integrated rubber ball and socket system allows the user to achieve ergonomic viewing and typing angles. If you’re a mobile professional, this product was designed for you.

Material:
High Strength Composite & Powder Coated Marine Grade Aluminum

RAM MOUNT SEAT-MATE SYSTEM W/ AMPS MOUNT

RAM Seat-Mate Description:
Compact, portable, amazingly strong and no tools required are words that best describe the new RAM Seat-Mate. Able to transform most any passenger seat into a workstation, simply unpack the mount from the compact bag, unfold the legs, and buckle it in. Truly innovative in design, this product is able to actively hold onto the seat and stabilize itself. For anyone who needs a temporary mobile workstation, this mounting solution is absolutely perfect. Designed to easily pack into a travel bag, suit case, or even under the seat of a vehicle, RAM makes it possible to create a comfortable workspace in minutes where ever your job takes you. The RAM Seat-Mate? is perfect for laptops, tablets, and UMPC?s. The integrated rubber ball and socket system allows the user to achieve ergonomic viewing and typing angles. If you?re a mobile professional, this product was designed for you.

Material:
High Strength Composite & Powder Coated Marine Grade Aluminum

The RAM Tough-Tray is spring loaded expandable tray that can accommodate 10 to 16 inch wide laptops. The tray includes four (4) side clamping arm with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS, PDAs or other electronics.

Tough-Tray Dimensions:
Tray Depth: 10.0"
Tray Thickness: 2.125"
Tray Width (Expansion): 10" to 16"
Side Clamp Arm Height: 0.5" (min) to 1.75" (max)

Material:
High Strength Composite

Note:
Part number reflects product packaged in clear clam shell for store shelf display. The Tough-Tray is compatible with laptops that have 17" screens. If the Tough-Tray Laptop Cradle is intended to hold a laptop or device while the vehicle is in motion, we recommend the Secure-n-Motion kit.

RAM MOUNT SEAT-MATE SYSTEM W/ UNIVERSAL LAPTOP TOUGH TRAY

RAM Seat-Mate Description:
Compact, portable, amazingly strong and no tools required are words that best describe the new RAM Seat-Mate. Able to transform most any passenger seat into a workstation, simply unpack the mount from the compact bag, unfold the legs, and buckle it in. Truly innovative in design, this product is able to actively hold onto the seat and stabilize itself. For anyone who needs a temporary mobile workstation, this mounting solution is absolutely perfect. Designed to easily pack into a travel bag, suit case, or even under the seat of a vehicle, RAM makes it possible to create a comfortable workspace in minutes where ever your job takes you. The RAM Seat-Mate is perfect for laptops, tablets, and UMPCs. The integrated rubber ball and socket system allows the user to achieve ergonomic viewing and typing angles. If you’re a mobile professional, this product was designed for you.

Material:
High Strength Composite & Powder Coated Marine Grade Aluminum

Tough Tray II

Well thought out and compact designs are common place at RAM and our new RAM Tough-Tray II is no exception. Spring loaded to create just the right amount of holding force, most tablets, UMPCs, and compact laptops can be made safe and secure while on the go. Simple to install and adjust retaining arms insure a perfect fit without interfering with ports or functions. Also, if a compact laptop is in place, these retaining arms hold firm with the screen up or down. Ideally suited to a multitude of applications, and easily attached to hundreds of mounting systems for cars, boats, planes, and more, compact devices just work better in the universal tablet holder from RAM.

Dimensions:
Tray Depth: 6.0"
Tray Thickness: 1"
Tray Width (Expansion): 8.56" to 12.31"
Side Clamp Arm Height: 2.75" max

Included With Purchase:
(1) Laptop Tray
(4) Standard Retaining Arms
(4) Flat Retaining Arms (Allow for laptops to close while in the tray)

RAM MOUNT SEAT-MATE SYSTEM W/ UNIVERSAL LAPTOP TOUGH TRAY II

The RAM RAM-VP-SW1-89, combination swing arm/tele-pole system, will connect to any RAM vehicle base without a welded female tele-pole. Included is a tele-pole with a height range from 11.5" to 17"; it can be easily adjusted by turning the knob at the top of the post. Once the knob has been tightened, the tele-pole becomes a rigid support for any RAM cradle, holder or Tough-Tray.

The double swing arm with rotating plate, allows you to twist and tilt the viewing angle of your laptop, tablet, UMPC, monitor, or any other connected electronic device, when mounted on your RAM Vehicle Mount. Taking the highly successful RAM Vehicle Mounts to the next level, this rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 12".

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
1.5" Rubber Ball "C" Size

Note:
Part number reflects product packaged in clear clam shell for store shelf display.

RAM MOUNT DOUBLE SWING ARM 8" MALE 9" FEMALE TUBE

The RAM Composite Universal Finger Grip Holder is designed to hold a large amount of cell phones and electronic devices. The holder comes with (3 sets) of four flexible rubber coated fingers placed along sides to grip your device. The fingers open by squeezing the ends to open the small finger arms. The bottom of the holder includes a back plate that adds support to the device being held by the mount.

This mount is designed to hold the following devices:
Cell Phones
2-Way Radios
GPS Devices
Height Dimensions:
Minimum with Top and Bottom Plates: 5.25"
Maximum with Top and Bottom Plates: 6.0"
The top and bottom plates can be removed for larger devices.

Spine Plate Dimensions:
2.5W x 5.0H"

Using Short Arm Side Clamps:
Maximum Depth: 0.75"
Minimum Width: 1.25"
Maximum Width: 3.0"

Using Medium Arm Side Clamps:
Maximum Depth: 1.25"
Minimum Width: 1.5"
Maximum Width: 3.5"

Using Long Arm Side Clamps:
Maximum Depth: 1.6"
Minimum Width: 2.25"
Maximum Width: 3.5"

Material:
High Strength Composite

Note:
The "U" in the part number reflects product packaged in poly bag.

RAM MOUNT UNIVERSAL PLASTIC ATV HOLDER

RAM 1 Inch Ball with 1/4-20 Stud for Cameras

The RAM-B-237U, universal camera and camcorder base consists of a 1" diameter rubber ball, connected to a 1/4"-20 camera thread. The male thread matches most standard camera and camcorder female threads found on the bottom of the camera.

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
1" Rubber Ball "B" Size

RAM MOUNT 1" BALL W/ 1/4-20 STUD FOR CAMERAS

This RAM high strength composite cradle is designed to hold the following devices:
Magellan Triton 200
Magellan Triton 300
Magellan Triton 400
Magellan Triton 500

Material:
High Strength Composite

Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

RAM MOUNT CRADLE FOR MAGELLAN TRITON 300/400/500

This RAM high strength composite cradle is designed to hold the following devices:
Magellan MobileMapper 6
Magellan Triton 1500
Magellan Triton 2000

Material:
High Strength Composite

Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

RAM MOUNT CRADLE FOR MAGELLAN TRITON 1500/2000

This RAM high strength composite cradle is designed to hold the following devices:
Delorme Earthmate PN-20
Delorme Earthmate PN-40
Delorme Earthmate PN-60
Delorme Earthmate PN-60w SE

Material:
High Strength Composite

Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

RAM MOUNT CRADLE FOR DELORME PN SERIES

This RAM high strength composite cradle is designed to hold the following devices:
Lowrance AirMap 600C
Lowrance iFinder Expedition C
Lowrance iFinder Explorer
Lowrance iFinder H20
Lowrance iFinder H20 C
Lowrance iFinder Hunt
Lowrance iFinder Hunt C
Lowrance iFinder Map & Music
Lowrance iFinder PhD
Lowrance iFinder PhD Plus
Lowrance iWay 100M

Material:
High Strength Composite

Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

RAM MOUNT CRADLE FOR LOWRANCE IFINDER H2O W/ HARDWARE

This RAM high strength composite cradle is designed to hold the following devices:
Spot Satellite Personal Tracker

Material:
High Strength Composite

Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

RAM MOUNT FOR SPOT SATELLITE GPS MESSENGER

RAM Holder Cradle for Apple iPhone 4

Material: High Strength Composite

Ball Size: 1" Rubber ball "B" Size

The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. Will not hold the Apple iPhone (1st Generation), iPhone 3G or iPhone 3G S.

RAM MOUNT APPLE IPHONE 4G CRADLE ONLY

RAM Holder Cradle for Apple iPhone 4

Material: High Strength Composite

Ball Size: 1" Rubber ball "B" Size

The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. Will not hold the Apple iPhone (1st Generation), iPhone 3G or iPhone 3G S.

Lil’ Buddy Mount

Minimalists in design yet incredibly useful is the RAM Lil’ Buddy mount. Using an adhesive disk, put the Lil’ Buddy practically anywhere you want to keep your portable electronics easy to see and always within your reach.

Designed with a very small foot print, finding a home on your dash or console is easy. Deciding what you want to mount may be a tough decision though. With so many uses, your iPhone, Blackberry, Palm, or MP3 player can be perfectly matched and supported by your new best friend, the RAM Lil’ Buddy.

The Lil’ Buddy attaches directly to any RAM cradle and industry standard AMPS hole pattern. This mount rotates 180 degrees.

Material:
High Strength Composite

RAM MOUNT APPLE IPHONE 4G LIL BUDDY MOUNT

RAM Holder Cradle for Apple iPhone 4

Material: High Strength Composite

Ball Size: 1" Rubber ball "B" Size

The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. Will not hold the Apple iPhone (1st Generation), iPhone 3G or iPhone 3G S.

RAM Rail EZ-On Swivel Rail Mount

Designed to fit most common handlebar sizes, this compact and durable mount is ideally suited to the open road or trails. Uses common zip ties to attach to a variety of handlebar diameters. Made of high strength composite, it is light weight too. Adjustable to allow for the best viewing angle, this product is perfect for any cyclist and their compact electronic device.

Material: High Strength Composite and Powder Coated Marine Grade Aluminum

RAM MOUNT APPLE IPHONE 4G EZ ON/OFF RAIL MOUNT

RAM Holder Cradle for Apple iPhone 4

Material: High Strength Composite

Ball Size: 1" Rubber ball "B" Size

The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. Will not hold the Apple iPhone (1st Generation), iPhone 3G or iPhone 3G S.

Composite Suction Cup Mount
The RAP-B-166-2U is a low profile, light weight and secure suction cup mount that is perfect for securing electronic devices in your mobile environment. Simply attach the suction cup base to the windshield of your vehicle for an easy and safe way to view your electronic device in your vehicle. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials ensure your electronic device is safe, secure, and within easy reach. RAM’s design also dampens shock and vibration helping to extend the life of your mobile device.

RAM MOUNT APPLE IPHONE 4G COMPOSITE SUCTION CUP MOUNT

RAM Holder Cradle for Apple iPhone 4

Material: High Strength Composite

Ball Size: 1" Rubber ball "B" Size

The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. Will not hold the Apple iPhone (1st Generation), iPhone 3G or iPhone 3G S.

Flex Stick-On Base

The RAM peel and stick mount includes a composite, flex adhesive base. Peel off the adhesive back and stick the mount where it will work best for you. The RAM peel and stick mount is far and away the most discrete and clean way to mount most any compact electronic device to the dash of your vehicle. Once the snap link ball is inserted into the socket, the screw on the socket can be tightened, resulting in friction between the socket and the ball. This allowing you to move the mount and your device easily while still holding the position you leave it in.

RAM MOUNT APPLE IPHONE 4G FLEX STICK ON BASE

RAM Holder Cradle for Apple iPhone 4

Material: High Strength Composite

Ball Size: 1" Rubber ball "B" Size

The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. Will not hold the Apple iPhone (1st Generation), iPhone 3G or iPhone 3G S.

U-Bolt Base
The u-bolt base makes attaching to handlebars, tubing, or railing a breeze. Simple to install and easy to use, the possibilities become endless. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your device is safe, secure, and within easy reach. RAM’s design also dampens shock and vibration helping to extend the life of your mobile device. Included in this package is hardware that accommodates rails from 0.75" to 1.25" in diameter.

Material:
Powder Coated Marine Grade Aluminum

RAM MOUNT APPLE IPHONE 4G U-BOLT MOUNT

RAM Holder Cradle for Apple iPhone 4

Material: High Strength Composite

Ball Size: 1" Rubber ball "B" Size

The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. Will not hold the Apple iPhone (1st Generation), iPhone 3G or iPhone 3G S.

Clutch Brake Mount
Simply attach the RAM ball base to the brake/clutch handlebar control bracket and the possibilities become endless. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your Apple Touch is safe, secure, and within easy reach. RAM’s design also dampens shock and vibration helping to extend the life of your mobile device. Cutting edge products like the Apple Touch deserve a cutting edge mount and RAM delivers.

Material:
Powder Coated Marine Grade Aluminum

RAM MOUNT APPLE IPHONE 4G CLUTCH BRAKE MOUNT

RAM Holder Cradle for Apple iPhone 4

Material: High Strength Composite

Ball Size: 1" Rubber ball "B" Size

The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. Will not hold the Apple iPhone (1st Generation), iPhone 3G or iPhone 3G S.

Screw Down Mounting Base
Simply choose your preferred mounting location and the possibilities become endless with the RAM-B-138U. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your device is safe, secure, and within easy reach. RAM’s design also dampens shock and vibration helping to extend the life of your device.

Material: Powder Coated Marine Grade Aluminum

RAM MOUNT APPLE IPHONE 4G SURFACE MOUNT

This RAM high strength composite cradle is designed to hold the following devices:
Apple iPod G1 10GB
Apple iPod G1 5GB
Apple iPod G2 10GB
Apple iPod G3 10GB
Apple iPod G3 15GB
Apple iPod G3 20GB
Apple iPod G3 30GB
Apple iPod G3 40GB
Apple iPod G4 20GB
Apple iPod G4 40GB
Apple iPod G4 60GB
Apple iPod G5 30GB
Apple iPod G5 60GB
Apple iPod G5 80GB
Apple iPod U2 20GB

Material:
High Strength Composite

Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

RAM MOUNT CRADLE FOR APPLE IPOD CLASSIC

This RAM high strength composite cradle is designed to hold the following devices:
Apple iPod Nano G1
Apple iPod Nano G2 2GB
Apple iPod Nano G2 4GB
Apple iPod Nano G2 8GB

Material:
High Strength Composite

Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

This cradle will not hold the Apple iPod Nano (3rd Generation).

RAM MOUNT CRADLE FOR APPLE IPOD NANO

This RAM high strength composite cradle is designed to hold the following devices:
Apple iPod touch (1st Generation)

Material:
High Strength Composite

Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

This cradle will not hold the Apple iPod touch (2nd Generation).

RAM MOUNT CRADLE FOR APPLE IPOD TOUCH 1ST GENERATION

This RAM high strength composite cradle is designed to hold the following devices:
Apple iPhone 3G
Apple iPhone 3G S

Material:
High Strength Composite

Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

This cradle will not hold the 1st Generation Apple iPhone.

RAM MOUNT CRADLE FOR APPLE IPHONE 3G

This RAM high strength composite cradle is designed to hold the following devices:
Apple iPod touch (2nd Generation)

Material:
High Strength Composite

Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

This cradle will not hold the Apple iPod touch (1st Generation).

RAM MOUNT CRADLE FOR APPLE TOUCH 2ND GENERATION

RAM high strength composite cradle for the Apple iPad.

This cradle is designed to hold the following devices:
Apple iPad Wi-Fi 16GB, 32GB and 64GB
Apple iPad Wi-Fi + 3G 16GB, 32GB and 64GB

Features:
1. Easy access to electronic ports
2. Roller design for super smooth placement and removal of the iPad

Material:
High Strength Composite

RAM MOUNT APPLE IPAD HOLDER

RAM high strength composite cradle with dial combination lock for the Apple iPad.

This cradle is designed to hold the following devices:
Apple iPad Wi-Fi 16GB, 32GB and 64GB
Apple iPad Wi-Fi + 3G 16GB, 32GB and 64GB

Features:
1. Easy access to electronic ports
2. Dial combination lock
3. (4 qty) mounting points with pre-drilled holes, including the universal AMPS hole pattern.

Material:
High Strength Composite

RAM MOUNT APPLE IPAD LOCKING HOLDER

UNPKD Ram Mount w/ Suction Base - 1/4"- 20

Ball Size: 1 Inch Rubber Ball
Color: Black Powder Coat
Material: Powder Coated Marine Grade Aluminum

RAM MOUNT CAMERA MOUNT W/ SUCTION BASE 1/4"-20 THREAD

Simply attach the RAM ball base to the brake/clutch handlebar control bracket and the possibilities become endless. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your Apple Touch is safe, secure, and within easy reach. RAM’s design also dampens shock and vibration helping to extend the life of your mobile device. Cutting edge products like the Apple Touch deserve a cutting edge mount and RAM delivers.

Material:
Powder Coated Marine Grade Aluminum

Note:
The "U" in the part number reflects product packaged in poly bag. To see if the (RAM-B-309-1U) base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94" and a maximum of 1.58".

RAM MOUNT GOLDWING MOUNT REQUIRES CRADLE

The u-bolt base makes attaching to handlebars, tubing, or railing a breeze. Simple to install and easy to use, the possibilities become endless. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your device is safe, secure, and within easy reach. RAM’s design also dampens shock and vibration helping to extend the life of your mobile device. Included in this package is hardware that accommodates rails from 0.75" to 1.25" in diameter.

Material:
Powder Coated Marine Grade Aluminum

Note:
The "U" in the part number reflects product packaged in poly bag. If you prefer a motorcycle mount with stainless steel hardware, view the RAM-B-149U. To accommodate rails smaller than 0.75" in diameter RAM provides the extension RAP-319U.

RAM MOUNT U BOLT MOUNT REQUIRES CRADLE

The RAM-B-166U, twist lock suction cup mount consists of a 3.25" suction cup locking base and diamond plate end. The mount is designed with a RAM 1" diameter rubber ball and socket system that has adjustment point at the cradle plate and base. Simply attach the suction cup base to the windshield of your vehicle for an easy and safe way to view your iPhone in your vehicle. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials ensure your iPhone is safe, secure, and within easy reach. RAM’s design also dampens shock and vibration helping to extend the life of your mobile device.

Material:
Powder Coated Marine Grade Aluminum

Note:
The "U" in the part number reflects product packaged in poly bag. This mount does not require any drilling for installation.

RAM MOUNT SUCTION MOUNT TWIST LOCK BASE REQURIES CRADLE

The RAM peel and stick mount includes a composite, flex adhesive base. Peel off the adhesive back and stick the mount where it will work best for you. The RAM peel and stick mount is far and away the most discrete and clean way to mount most any compact electronic device to the dash of your vehicle. Once the snap link ball is inserted into the socket, the screw on the socket can be tightened, resulting in friction between the socket and the ball. This allowing you to move the mount and your device easily while still holding the position you leave it in.

RAM MOUNT FLEX STICK ON BASE W/ SNAP LINK MOUNT

Simply choose your preferred mounting location and the possibilities become endless with the RAM-B-138U. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your device is safe, secure, and within easy reach. RAM’s design also dampens shock and vibration helping to extend the life of your device.

Material: Powder Coated Marine Grade Aluminum

RAM MOUNT SCREW DOWN MOUNT REQUIRES RAM CRADLE

Designed for a clean installation, the RAM UTV strap mount will accommodate most common roll bar sizes on UTV’s, allowing for the placement of the RAM rubber ball base. The RAM UTV strap mount can also be attached to smaller diameter handlebars on ATVs using the included hardware. With the ball base in place, you have the foundation for mounting everything from GPS Devices, RAM Aqua Boxes, Spotlights and Radios.

Strap Dimensions:
1.57" (40mm) to a maximum of 3.15" (80mm)

Material:
Powder Coated Marine Grade Aluminum

Note:
The "U" in the part number reflects product packaged in poly bag.

RAM MOUNT RAIL ATV UTV MOUNT W/ DIAMOND

RAM Long Double Socket Arm for 1" Ball Bases

The RAM-B-201U-C, long double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.

Dimensions:
Overall Length: 6"
Socket-To-Socket Length: 5.1875"

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
1" Rubber Ball "B" Size

RAM MOUNT RAM LONG DOUBLE SOCKET ARM FOR 1" BALL BASES

RAM Double Socket Arm for 1" Ball Bases

The RAM-B-201U, standard double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.
Dimensions:
Overall Length: 3.69"
Socket-To-Socket Length: 3"

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
1" Rubber Ball "B" Size

RAM MOUNT RAM DOUBLE SOCKET ARM FOR 1" BALL

Mount a GPS, MP3 player, or cell phone quickly and eaily with a RAM EZ-ON/OFF handlebar base. Designed to fit most common handlebar sizes, this compact and durable mount is ideally suited to the open road or trails. Uses common zip ties to attach to a variety of handlebar diameters. Made of high strength composite, it is light weight too. Adjustable to allow for the best viewing angle, this product is perfect for any cyclist and their compact electronic device.

Material: High Strength Composite and Powder Coated Marine Grade Aluminum

RAM MOUNT RAM RAIL EZ-ON W/ SWIVEL FEATURE RAIL MOUNT

RAM Short Double Socket Arm for 1.5" Ball Bases

The RAM-201U-B, SHORT double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.

Dimensions:
Overall Length: 3.5"
Socket-To-Socket Length: 2.25"

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
1.5" Rubber Ball Size

RAM MOUNT SHORT DOUBLE SOCKET ARM FOR 1.5" BALL

RAM Double Socket Arm for 1.5" Ball Bases

The RAM-201U, standard double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.
Dimensions:
Overall Length: 5.625"
Socket-To-Socket Length: 4.5"

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
1.5" Rubber Ball Size

RAM MOUNT DOUBLE SOCKET ARM FOR 1.5" BALL

RAM Long Double Socket Arm for 1.5" Ball Bases

The RAM-201U-D, LONG double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.

Dimensions:
Overall Length: 9.125"
Socket-To-Socket Length: 8.75"

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
1.5" Rubber Ball Size

RAM MOUNT LONG DOUBLE SOCKET ARM FOR 1.5" BALL

RAM 2.5" Round Base w/ AMPs Hole Pattern & 1.5" Ball

The RAM-202U consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern.

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
1.5" Rubber Ball Size

RAM MOUNT 2-1/2" DIAMETER BASE W/ 1.5" BALL

This RAM high strength composite cradle is designed to hold the following devices:
Garmin eTrex Legend
Garmin eTrex Summit
Garmin eTrex Venture
Garmin eTrex Vista

Material:
High Strength Composite

Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

RAM MOUNT CRADLE FOR GARMIN ETREX SERIES

This RAM high strength composite cradle is designed to hold the following devices:
Garmin GPS 72
Garmin GPS 76
Garmin GPS 96
Garmin GPSMAP 72
Garmin GPSMAP 76S

Material:
High Strength Composite

Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

RAM MOUNT CRADLE FOR GARMIN GPS 76 SERIES

This RAM high strength composite cradle is designed to hold the following devices:
Garmin Rino 110
Garmin Rino 120
Garmin Rino 130

Material:
High Strength Composite

Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

RAM MOUNT CRADLE FOR GARMIN RINO SERIES EXCEPT 520 - 530

This RAM high strength composite cradle is designed to hold the following devices:
Garmin Astro 220
Garmin GPS 60
Garmin GPSMAP 60
Garmin GPSMAP 60C
Garmin GPSMAP 60CS
Garmin GPSMAP 60CSx
Garmin GPSMAP 60Cx

Material:
High Strength Composite

Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

*The RAM-HOL-GA12U RAM cradle requires the standard belt clip button which is included with the purchase of the GPS unit from Garmin.


RAM MOUNT CRADLE FOR GARMIN 60 SERIES

This RAM high strength composite cradle is designed to hold the following devices:
Garmin GPSMAP 76C
Garmin GPSMAP 76CS
Garmin GPSMAP 76CSx
Garmin GPSMAP 76Cx
Garmin GPSMAP 96
Garmin GPSMAP 96C

Material:
High Strength Composite

Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.


RAM MOUNT CRADLE FOR GARMIN GPSMAP 76C SERIES

This RAM high strength composite cradle is designed to hold the following devices:
Garmin eTrex Legend C
Garmin eTrex Legend Cx
Garmin eTrex Venture Cx
Garmin eTrex Vista C
Garmin eTrex Vista CX
Garmin eTrex Vista HCx

Material:
High Strength Composite

Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

This cradle will not hold Garmin eTrex (Non-Color) GPS devices


RAM MOUNT CRADLE FOR GARMIN ETREX COLOR SERIES

This RAM high strength composite cradle is designed to hold the following devices:
Garmin Colorado 300
Garmin Colorado 400c
Garmin Colorado 400i
Garmin Colorado 400t

Material:
High Strength Composite

Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

RAM MOUNT CRADLE FOR GARMIN COLORADO SERIES

Easy and convenient describe the RAM-EZY-Mount line of products. Utilizing a quick release male to female union, these mounts are absolutely perfect for those who want the most secure, yet rapid release and portable kit possible. How does it work? Mate an EZY-Mount male or female component to any RAM cradle or device with the standard AMPS hole pattern. Align the two parts and snap into place. To release, push back the release tab and go. One of the best features is the ability to easily swap out your GPS for MP3 or your radar detector for XM radio.

Material: High Strength Composite

RAM MOUNT RAM EZY-MOUNT QUICK RELEASE ADAPTER SYSTEM

This RAM high strength composite cradle is designed to hold the following devices:
Garmin GPSMAP 78
Garmin GPSMAP 78s
Garmin GPSMAP 78sc

Material:
High Strength Composite

Ball Size:
1" Rubber Ball "B" Size

Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

RAM MOUNT CRADLE F/ GARMIN GPSMAP 78

Minimalists in design yet incredibly useful is the RAM Lil’ Buddy™ mount. Using an adhesive disk, put the Lil’ Buddy practically anywhere you want to keep your portable electronics easy to see and always within your reach. Designed with a very small foot print, finding a home on your dash or console is easy. Deciding what you want to mount may be a tough decision though. With so many uses, your Garmin GPSMAP® can be perfectly matched and supported by your new best friend, the RAM Lil’ Buddy™. The Lil’ Buddy™ attaches directly to any RAM cradle and industry standard AMPS hole pattern. This mount rotates 180 degrees.

This mount is designed to hold the following devices:
Garmin GPSMAP® 62
Garmin GPSMAP® 62s
Garmin GPSMAP® 62st

Material:
High Strength Composite

RAM MOUNT GARMIN GPSMAP 62 LIL’ BUDDY MOUNT

• Garmin GPSMAP 62
  
• Garmin GPSMAP 62s
  
• Garmin GPSMAP 62st
  
  Material:
  High Strength Composite
  
  Ball Size:
  1" Rubber Ball "B" Size
  
  RAM MOUNT GARMIN GPSMAP 62 COMPOSITE SUCTION CUP MOUNT

• Garmin GPSMAP 62
  
• Garmin GPSMAP 62s
  
• Garmin GPSMAP 62st
  
  Material:
  High Strength Composite and Powder Coated Marine Grade Aluminum
  
  Ball Size:
  1" Rubber Ball "B" Size
  
  RAM MOUNT GARMIN GPSMAP 62 HANDLEBAR RAIL MOUNT

RAM ATV/UTV strap mount for the Garmin GPSMAP 62 series. Designed for a clean installation, the RAM UTV strap mount will accommodate most common roll bar sizes on UTV’s, allowing for the placement of the RAM rubber ball base. The RAM UTV strap mount can also be attached to smaller diameter handlebars on ATVs using the included hardware.

Strap Dimensions:
1.57" minimum to 3.15" maximum

Material:
High strength composite & powder coated marine grade aluminum

RAM MOUNT GARMIN GPSMAP 62 ATV/UTV STRAP MOUNT

Spotlight With 1" Ball

1" dia. ball Rubber Coated High Intensity Spotlight. This heavy duty, high intensity, spotlight has more than 32 different bulb selections available.

Material:
Powder Coated Marine Grade Aluminum

Ball Size:
1" Rubber Ball "B" Size

Note:
Part number reflects product packaged in clear clam shell for store shelf display. A Cigarette Lighter Socket is included. PAR36 Style Bulb


RAM MOUNT SPOTLIGHT W/ 1" BALL

Included with the cradle is three sets of clamping arms. The arms contain rubber tips for an optimum hold, The arms can be easily removed and changed so you can find the right clamping hold for your device.

This cradle is designed to hold the following devices:
PDA devices and other electronic devices

Length sizes for each set of three arms:
Short Length: 1/2"
Medium Length: 7/8"
Long Length: 1 3/16"

Cradle Clamping Dimensions:
Width: 2 7/8" - 3.5"
Thickness: 3/8" - 1 1/8"

Material:
High Strength Composite

Note:
The "U" in the part number reflects product packaged in poly bag. If this product is used for motorcycle applications insure that the mount is tethered and secured.

RAM MOUNT UNIVERSAL 3 FINGER HOLDER

Drink Cup Mount Description:
A favorite world wide, the RAM Self Leveling Drink Cup holder will bring a smile to anyone’s face when they get it. The perfect accessory for any vehicle including motorcycles, ATV’s, Big Rigs, and yes, even your prized riding lawn mower. Easily installed and positions to keep your favorite beverage within reach, this gem even comes with a RAM can insulator. Take a corner as hard as you like, this holder is ready to ride.

Motorcycle Brake/Clutch Reservoir Mount Description:
The base consists of a 1" diameter rubber ball, hardware for mounting to both brake/clutch reservoirs and rails that are 0.5" to 1.25" in diameter. The mounting hardware for brake/clutch reservoirs include both standard and metric mounting bolts. Multiple pivot points, rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your device is safe, secure, and within easy reach.

Material:
High Strength Composite and Powder Coated Marine Grade Aluminum

Ball Size:
1" Rubber Ball "B" Size

RAM MOUNT DRINK CUP HOLDER W/ GOLDWING UBOLT MOUNT

Drink Cup Mount Description:
A favorite world wide, the RAM self leveling drink cup holder will bring a smile to anyone’s face when they get it. The perfect accessory for any vehicle including motorcycles, ATV’s, Big Rigs, and yes, even your prized riding lawn mower. Easily installed and positions to keep your favorite beverage within reach, this gem even comes with a RAM can insulator. Take a corner as hard as you like, this holder is ready to ride.

Motorcycle Handlebar Mount Description:
The u-bolt base makes attaching to handlebars, tubing, or railing a breeze. Simple to install and easy to use, the possibilities become endless. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your device is safe, secure, and within easy reach. RAM’s design also dampens shock and vibration helping to extend the life of your mobile device. Included in this package is hardware for tubing that is 0.50" to 1.25" in diameter.

Material:
High Strength Composite and Powder Coated Marine Grade Aluminum

Ball Size:
1" Rubber Ball "B" Size

RAM MOUNT DRINK CUP HOLDER W/ U-BOLT BASE

A favorite world wide, the RAM Self Leveling Drink Cup holder will bring a smile to anyone’s face when they get it. The perfect accessory for any vehicle including motorcycles, ATV’s, Big Rigs, and yes, even your prized riding lawn mower. Easily installed and positions to keep your favorite beverage within reach, this gem even comes with a RAM can insulator. Take a corner as hard as you like, this holder is ready to ride.

Material:
High Strength Composite

Ball Size:
1" Rubber Ball "B" Size

RAM MOUNT DRINK CUP HOLDER W/ 1" BALL

The RAM-B-132SU consists of a 3.25" suction cup locking base and self leveling drink cup holder. The mount is designed with a RAM 1" diameter rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Simply attach the suction cup base to the windshield of your vehicle for an easy and safe way to view your handheld device in your vehicle. High quality materials ensure your electronic device is safe, secure, and within easy reach. RAM’s design also dampens shock and vibration helping to extend the life of your mobile device.

Material:
High Strength Composite and Powder Coated Marine Grade Aluminum

Ball Size:
1" Rubber Ball "B" Size

RAM MOUNT DRINK CUP HOLDER W/ SUCTION BASE

RAM Deck Track Mount designed to attach to Tite-Lok track systems with a 3.25" width. Compatible with any RAM Post and Spline rod holder.


Color: Black
Material: High Strength Plastic


RAM MOUNT RAM ROD 2000 DECK AND TRACK MOUNT BASE ONLY