Rudder angle indicators are economical steering aids and rudder position monitors.

Benefits:

• Useful aid for docking or close maneuvering.
• Constant monitoring of rudder angle position from 0 to 45 degrees.
• Ready for installation with all necessary components needed - meter, calibration box and sending unit.

Options:

• Available in four models:
  • MK2 model is water resistant and backlit.
  • MK445 models use compact flush mount meter with an edgewise readout.
  • MK5 and MK6 models use easy to read panoramic meters.
• Repeater units are available for multiple station readouts.

Rudder angle indicators are economical steering aids and rudder position monitors.

Benefits:

• Useful aid for docking or close maneuvering.
• Constant monitoring of rudder angle position from 0 to 45 degrees.
• Ready for installation with all necessary components needed - meter, calibration box and sending unit.

Options:

• Available in four models:
  • MK2 model is water resistant and backlit.
  • MK445 models use compact flush mount meter with an edgewise readout.
  • MK5 and MK6 models use easy to read panoramic meters.
• Repeater units are available for multiple station readouts.

Rudder angle indicators are economical steering aids and rudder position monitors.

Benefits:

• Useful aid for docking or close maneuvering.
• Constant monitoring of rudder angle position from 0 to 45 degrees.
• Ready for installation with all necessary components needed - meter, calibration box and sending unit.

Options:

• Available in four models:
  • MK2 model is water resistant and backlit.
  • MK445 models use compact flush mount meter with an edgewise readout.
  • MK5 and MK6 models use easy to read panoramic meters.
• Repeater units are available for multiple station readouts.

Rudder angle indicators are economical steering aids and rudder position monitors.

Benefits:

• Useful aid for docking or close maneuvering.
• Constant monitoring of rudder angle position from 0 to 45 degrees.
• Ready for installation with all necessary components needed - meter, calibration box and sending unit.

Options:

• Available in four models:
  • MK2 model is water resistant and backlit.
  • MK445 models use compact flush mount meter with an edgewise readout.
  • MK5 and MK6 models use easy to read panoramic meters.
• Repeater units are available for multiple station readouts.

The "1700 Series" water heater provides hot water for galley and shower. Dense foam insulation provides better and longer heat retention than traditional fiberglass. The tank itself is protected by a 75 PSI T& P ( temperature and pressure) relief valve. The cylindrical design of the tank enables it to withstand more pressure than a cube shaped tank.

Heat exchanger models can be connected to the engine cooling system. This provides the added convenience of hot water when underway or generator power is not available. The innovative heat exchanger is over seven feet in length and is evenly coiled throughout the interior of the tank, providing hot water rapidly and efficiently.

Raritan’s water heaters use an ignition protected thermostat. Although it is factory set to 120°F, it is adjustable from 110° to 160°F and has a safety shut down limit of 190°F. All models and sizes have the plumbing connections on the same side to simplify installation. Hot and cold water connections are " male NPT (National Pipe Thread). Heat exchanger connections are ¾" female NPT.

Benefits

• Simple installation - retrofits to most on-board pressure systems
• Proven long-life design
• Withstands the rigors of the marine environment
• Glass-lined steel tank is more durable than stainless steel
• Attractive polymer jacket resists corrosion from dampness
• Ignition-protected, adjustable thermostat
• Round tanks are designed to withstand more pressure than square tanks
• Glass-lined steel tank for long life and high efficiency
• Environmentally friendly CFC-free foam insulation
• Replaceable magnesium anode to protect tank and neutralize acids in the water
• The tank is covered by a five-year Limited Warranty
• Each unit is assembled by hand, individually tested and backed by Raritan’s two-year Limited Warranty and legendary technical support team

Dimensions

6 gal. 14 1/2"(36.9cm) Diameter 16 1/4"(41.9cm) High
12 gal. 18 3/4"(47.6cm) Diameter 16 1/4"(41.9cm) High
20 gal. 18 3/4"(47.6cm) Diameter 24 1/4"(60.6cm) High

There is also a 1" mounting flange adding and additional 2" to the base diameter.

The "1700 Series" water heater provides hot water for galley and shower. Dense foam insulation provides better and longer heat retention than traditional fiberglass. The tank itself is protected by a 75 PSI T& P ( temperature and pressure) relief valve. The cylindrical design of the tank enables it to withstand more pressure than a cube shaped tank.

Heat exchanger models can be connected to the engine cooling system. This provides the added convenience of hot water when underway or generator power is not available. The innovative heat exchanger is over seven feet in length and is evenly coiled throughout the interior of the tank, providing hot water rapidly and efficiently.

Raritan’s water heaters use an ignition protected thermostat. Although it is factory set to 120°F, it is adjustable from 110° to 160°F and has a safety shut down limit of 190°F. All models and sizes have the plumbing connections on the same side to simplify installation. Hot and cold water connections are " male NPT (National Pipe Thread). Heat exchanger connections are ¾" female NPT.

Benefits

• Simple installation - retrofits to most on-board pressure systems
• Proven long-life design
• Withstands the rigors of the marine environment
• Glass-lined steel tank is more durable than stainless steel
• Attractive polymer jacket resists corrosion from dampness
• Ignition-protected, adjustable thermostat
• Round tanks are designed to withstand more pressure than square tanks
• Glass-lined steel tank for long life and high efficiency
• Environmentally friendly CFC-free foam insulation
• Replaceable magnesium anode to protect tank and neutralize acids in the water
• The tank is covered by a five-year Limited Warranty
• Each unit is assembled by hand, individually tested and backed by Raritan’s two-year Limited Warranty and legendary technical support team

Dimensions

6 gal. 14 1/2"(36.9cm) Diameter 16 1/4"(41.9cm) High
12 gal. 18 3/4"(47.6cm) Diameter 16 1/4"(41.9cm) High
20 gal. 18 3/4"(47.6cm) Diameter 24 1/4"(60.6cm) High

There is also a 1" mounting flange adding and additional 2" to the base diameter.

The "1700 Series" water heater provides hot water for galley and shower. Dense foam insulation provides better and longer heat retention than traditional fiberglass. The tank itself is protected by a 75 PSI T& P ( temperature and pressure) relief valve. The cylindrical design of the tank enables it to withstand more pressure than a cube shaped tank.

Heat exchanger models can be connected to the engine cooling system. This provides the added convenience of hot water when underway or generator power is not available. The innovative heat exchanger is over seven feet in length and is evenly coiled throughout the interior of the tank, providing hot water rapidly and efficiently.

Raritan’s water heaters use an ignition protected thermostat. Although it is factory set to 120°F, it is adjustable from 110° to 160°F and has a safety shut down limit of 190°F. All models and sizes have the plumbing connections on the same side to simplify installation. Hot and cold water connections are " male NPT (National Pipe Thread). Heat exchanger connections are ¾" female NPT.

Benefits

• Simple installation - retrofits to most on-board pressure systems
• Proven long-life design
• Withstands the rigors of the marine environment
• Glass-lined steel tank is more durable than stainless steel
• Attractive polymer jacket resists corrosion from dampness
• Ignition-protected, adjustable thermostat
• Round tanks are designed to withstand more pressure than square tanks
• Glass-lined steel tank for long life and high efficiency
• Environmentally friendly CFC-free foam insulation
• Replaceable magnesium anode to protect tank and neutralize acids in the water
• The tank is covered by a five-year Limited Warranty
• Each unit is assembled by hand, individually tested and backed by Raritan’s two-year Limited Warranty and legendary technical support team

Dimensions

6 gal. 14 1/2"(36.9cm) Diameter 16 1/4"(41.9cm) High
12 gal. 18 3/4"(47.6cm) Diameter 16 1/4"(41.9cm) High
20 gal. 18 3/4"(47.6cm) Diameter 24 1/4"(60.6cm) High

There is also a 1" mounting flange adding and additional 2" to the base diameter.

The "1700 Series" water heater provides hot water for galley and shower. Dense foam insulation provides better and longer heat retention than traditional fiberglass. The tank itself is protected by a 75 PSI T& P ( temperature and pressure) relief valve. The cylindrical design of the tank enables it to withstand more pressure than a cube shaped tank.

Heat exchanger models can be connected to the engine cooling system. This provides the added convenience of hot water when underway or generator power is not available. The innovative heat exchanger is over seven feet in length and is evenly coiled throughout the interior of the tank, providing hot water rapidly and efficiently.

Raritan’s water heaters use an ignition protected thermostat. Although it is factory set to 120°F, it is adjustable from 110° to 160°F and has a safety shut down limit of 190°F. All models and sizes have the plumbing connections on the same side to simplify installation. Hot and cold water connections are " male NPT (National Pipe Thread). Heat exchanger connections are ¾" female NPT.

Benefits

• Simple installation - retrofits to most on-board pressure systems
• Proven long-life design
• Withstands the rigors of the marine environment
• Glass-lined steel tank is more durable than stainless steel
• Attractive polymer jacket resists corrosion from dampness
• Ignition-protected, adjustable thermostat
• Round tanks are designed to withstand more pressure than square tanks
• Glass-lined steel tank for long life and high efficiency
• Environmentally friendly CFC-free foam insulation
• Replaceable magnesium anode to protect tank and neutralize acids in the water
• The tank is covered by a five-year Limited Warranty
• Each unit is assembled by hand, individually tested and backed by Raritan’s two-year Limited Warranty and legendary technical support team

Dimensions

6 gal. 14 1/2"(36.9cm) Diameter 16 1/4"(41.9cm) High
12 gal. 18 3/4"(47.6cm) Diameter 16 1/4"(41.9cm) High
20 gal. 18 3/4"(47.6cm) Diameter 24 1/4"(60.6cm) High

There is also a 1" mounting flange adding and additional 2" to the base diameter.

The "1700 Series" water heater provides hot water for galley and shower. Dense foam insulation provides better and longer heat retention than traditional fiberglass. The tank itself is protected by a 75 PSI T& P ( temperature and pressure) relief valve. The cylindrical design of the tank enables it to withstand more pressure than a cube shaped tank.

Heat exchanger models can be connected to the engine cooling system. This provides the added convenience of hot water when underway or generator power is not available. The innovative heat exchanger is over seven feet in length and is evenly coiled throughout the interior of the tank, providing hot water rapidly and efficiently.

Raritan’s water heaters use an ignition protected thermostat. Although it is factory set to 120°F, it is adjustable from 110° to 160°F and has a safety shut down limit of 190°F. All models and sizes have the plumbing connections on the same side to simplify installation. Hot and cold water connections are " male NPT (National Pipe Thread). Heat exchanger connections are ¾" female NPT.

Benefits

• Simple installation - retrofits to most on-board pressure systems
• Proven long-life design
• Withstands the rigors of the marine environment
• Glass-lined steel tank is more durable than stainless steel
• Attractive polymer jacket resists corrosion from dampness
• Ignition-protected, adjustable thermostat
• Round tanks are designed to withstand more pressure than square tanks
• Glass-lined steel tank for long life and high efficiency
• Environmentally friendly CFC-free foam insulation
• Replaceable magnesium anode to protect tank and neutralize acids in the water
• The tank is covered by a five-year Limited Warranty
• Each unit is assembled by hand, individually tested and backed by Raritan’s two-year Limited Warranty and legendary technical support team

Dimensions

6 gal. 14 1/2"(36.9cm) Diameter 16 1/4"(41.9cm) High
12 gal. 18 3/4"(47.6cm) Diameter 16 1/4"(41.9cm) High
20 gal. 18 3/4"(47.6cm) Diameter 24 1/4"(60.6cm) High

There is also a 1" mounting flange adding and additional 2" to the base diameter.

The "1700 Series" water heater provides hot water for galley and shower. Dense foam insulation provides better and longer heat retention than traditional fiberglass. The tank itself is protected by a 75 PSI T& P ( temperature and pressure) relief valve. The cylindrical design of the tank enables it to withstand more pressure than a cube shaped tank.

Heat exchanger models can be connected to the engine cooling system. This provides the added convenience of hot water when underway or generator power is not available. The innovative heat exchanger is over seven feet in length and is evenly coiled throughout the interior of the tank, providing hot water rapidly and efficiently.

Raritan’s water heaters use an ignition protected thermostat. Although it is factory set to 120°F, it is adjustable from 110° to 160°F and has a safety shut down limit of 190°F. All models and sizes have the plumbing connections on the same side to simplify installation. Hot and cold water connections are " male NPT (National Pipe Thread). Heat exchanger connections are ¾" female NPT.

Benefits

• Simple installation - retrofits to most on-board pressure systems
• Proven long-life design
• Withstands the rigors of the marine environment
• Glass-lined steel tank is more durable than stainless steel
• Attractive polymer jacket resists corrosion from dampness
• Ignition-protected, adjustable thermostat
• Round tanks are designed to withstand more pressure than square tanks
• Glass-lined steel tank for long life and high efficiency
• Environmentally friendly CFC-free foam insulation
• Replaceable magnesium anode to protect tank and neutralize acids in the water
• The tank is covered by a five-year Limited Warranty
• Each unit is assembled by hand, individually tested and backed by Raritan’s two-year Limited Warranty and legendary technical support team

Dimensions

6 gal. 14 1/2"(36.9cm) Diameter 16 1/4"(41.9cm) High
12 gal. 18 3/4"(47.6cm) Diameter 16 1/4"(41.9cm) High
20 gal. 18 3/4"(47.6cm) Diameter 24 1/4"(60.6cm) High

There is also a 1" mounting flange adding and additional 2" to the base diameter.

With a new, streamlined door, flush mount option and ergonomic door handle, the redesigned Icer-Ette from Raritan offers more uniquie features than ever before.

Benefits:

• Magnetic door gasket ensures a tight seal for more efficient operation and less frost
• Constructed from high-quality marine grade components
• Produces over 22 pounds of ice per day, Removable ice bucket stores 11 pounds.
• Noncorrosive materials, fittings and fasteners.

Options:

• Flush mount, built-in and free-standing models

Item pictured is the generic picture for Raritans Icerette line, not a match to this model.

With a new, streamlined door, flush mount option and ergonomic door handle, the redesigned Icer-Ette from Raritan offers more uniquie features than ever before.

Benefits:

• Magnetic door gasket ensures a tight seal for more efficient operation and less frost
• Constructed from high-quality marine grade components
• Produces over 22 pounds of ice per day, Removable ice bucket stores 11 pounds.
• Noncorrosive materials, fittings and fasteners.

Options:

• Flush mount, built-in and free-standing models

Item pictured is the generic picture for Raritans Icerette line, not a match to this model.

With a new, streamlined door, flush mount option and ergonomic door handle, the redesigned Icer-Ette from Raritan offers more uniquie features than ever before.

Benefits:

• Magnetic door gasket ensures a tight seal for more efficient operation and less frost
• Constructed from high-quality marine grade components
• Produces over 22 pounds of ice per day, Removable ice bucket stores 11 pounds.
• Noncorrosive materials, fittings and fasteners.

Options:

• Flush mount, built-in and free-standing models

Item pictured is the generic picture for Raritans Icerette line, not a match to this model.

With a new, streamlined door, flush mount option and ergonomic door handle, the redesigned Icer-Ette from Raritan offers more uniquie features than ever before.

Benefits:

• Magnetic door gasket ensures a tight seal for more efficient operation and less frost
• Constructed from high-quality marine grade components
• Produces over 22 pounds of ice per day, Removable ice bucket stores 11 pounds.
• Noncorrosive materials, fittings and fasteners.

Options:

• Flush mount, built-in and free-standing models

Item pictured is the generic picture for Raritans Icerette line, not a match to this model.

With a new, streamlined door, flush mount option and ergonomic door handle, the redesigned Icer-Ette from Raritan offers more uniquie features than ever before.

Benefits:

• Magnetic door gasket ensures a tight seal for more efficient operation and less frost
• Constructed from high-quality marine grade components
• Produces over 22 pounds of ice per day, Removable ice bucket stores 11 pounds.
• Noncorrosive materials, fittings and fasteners.

Options:

• Flush mount, built-in and free-standing models

Item pictured is the generic picture for Raritans Icerette line, not a match to this model.

With a new, streamlined door, flush mount option and ergonomic door handle, the redesigned Icer-Ette from Raritan offers more uniquie features than ever before.

Benefits:

• Magnetic door gasket ensures a tight seal for more efficient operation and less frost
• Constructed from high-quality marine grade components
• Produces over 22 pounds of ice per day, Removable ice bucket stores 11 pounds.
• Noncorrosive materials, fittings and fasteners.

Options:

• Flush mount, built-in and free-standing models

Item pictured is the generic picture for Raritans Icerette line, not a match to this model.

The SeaEra is an economical electric macerating toilet that fits into confined spaces. This toilet was designed to meet the needs of boaters.

Engineering has developed a new built-in discharge fitting that can accept either 1½" (38mm) or 1" (25mm) discharge lines without the need for an adapter. The SeaEra’s discharge pump can handle a vented loop with a maximum height of five feet (1.52m) and utilizes a full-sized joker valve to help avoid clogging.

The inlet pump can lift water from four feet (1.22m) below the toilet and can be run dry without damaging the pump. To simplify a new installation or a retrofit, water can be routed from either side of the inlet pump using interchangeable ¾" (19mm) hose barb fittings (two straight and one 90°), which are included.

Benefits

• Uncompromising quality for the most demanding boaters
• Economical electric macerating marine toilet
• Simple and flexible installation for mounting above or below waterline
• Bowl can be rotated 90ø for mounting into confined spaces and retrofit mounting
• Heavy-duty marine push-button switch included with all models
• Sea water models include an in-line strainer
• Pressurized freshwater models include vacuum breaker
• Fits 1½" (38mm) or 1" (25mm) discharge line with no adapters
• Easy to clean and maintain
• Can be run dry without damaging the pump
• Low power consumption and quieter operation for on-board pressurized freshwater models
• Can be used with on-board treatment systems (such as the Lectra/San®) and/or holding tanks
• Each unit is assembled by hand, individually tested and backed by Raritan’s one-year Limited Warranty and legendary technical support team

This model has a household bowl, freshwater solenoid, straight discharge and runs on 12v

The SeaEra is an economical electric macerating toilet that fits into confined spaces. This toilet was designed to meet the needs of boaters.

Engineering has developed a new built-in discharge fitting that can accept either 1½" (38mm) or 1" (25mm) discharge lines without the need for an adapter. The SeaEra’s discharge pump can handle a vented loop with a maximum height of five feet (1.52m) and utilizes a full-sized joker valve to help avoid clogging.

The inlet pump can lift water from four feet (1.22m) below the toilet and can be run dry without damaging the pump. To simplify a new installation or a retrofit, water can be routed from either side of the inlet pump using interchangeable ¾" (19mm) hose barb fittings (two straight and one 90°), which are included.

Benefits

• Uncompromising quality for the most demanding boaters
• Economical electric macerating marine toilet
• Simple and flexible installation for mounting above or below waterline
• Bowl can be rotated 90ø for mounting into confined spaces and retrofit mounting
• Heavy-duty marine push-button switch included with all models
• Sea water models include an in-line strainer
• Pressurized freshwater models include vacuum breaker
• Fits 1½" (38mm) or 1" (25mm) discharge line with no adapters
• Easy to clean and maintain
• Can be run dry without damaging the pump
• Low power consumption and quieter operation for on-board pressurized freshwater models
• Can be used with on-board treatment systems (such as the Lectra/San®) and/or holding tanks
• Each unit is assembled by hand, individually tested and backed by Raritan’s one-year Limited Warranty and legendary technical support team

This model has a household bowl, integral pump, and runs on 12v

The SeaEra is an economical electric macerating toilet that fits into confined spaces. This toilet was designed to meet the needs of boaters.

Engineering has developed a new built-in discharge fitting that can accept either 1½" (38mm) or 1" (25mm) discharge lines without the need for an adapter. The SeaEra’s discharge pump can handle a vented loop with a maximum height of five feet (1.52m) and utilizes a full-sized joker valve to help avoid clogging.

The inlet pump can lift water from four feet (1.22m) below the toilet and can be run dry without damaging the pump. To simplify a new installation or a retrofit, water can be routed from either side of the inlet pump using interchangeable ¾" (19mm) hose barb fittings (two straight and one 90°), which are included.

Benefits

• Uncompromising quality for the most demanding boaters
• Economical electric macerating marine toilet
• Simple and flexible installation for mounting above or below waterline
• Bowl can be rotated 90° for mounting into confined spaces and retrofit mounting
• Heavy-duty marine push-button switch included with all models
• Sea water models include an in-line strainer
• Pressurized freshwater models include vacuum breaker
• Fits 1½" (38mm) or 1" (25mm) discharge line with no adapters
• Easy to clean and maintain
• Can be run dry without damaging the pump
• Low power consumption and quieter operation for on-board pressurized freshwater models
• Can be used with on-board treatment systems (such as the Lectra/San®) and/or holding tanks
• Each unit is assembled by hand, individually tested and backed by Raritan’s one-year Limited Warranty and legendary technical support team

This model has a conversion kit, freshwater solenoid, straight discharge and runs on 12v

The SeaEra is an economical electric macerating toilet that fits into confined spaces. This toilet was designed to meet the needs of boaters.

Engineering has developed a new built-in discharge fitting that can accept either 1½" (38mm) or 1" (25mm) discharge lines without the need for an adapter. The SeaEra’s discharge pump can handle a vented loop with a maximum height of five feet (1.52m) and utilizes a full-sized joker valve to help avoid clogging.

The inlet pump can lift water from four feet (1.22m) below the toilet and can be run dry without damaging the pump. To simplify a new installation or a retrofit, water can be routed from either side of the inlet pump using interchangeable ¾" (19mm) hose barb fittings (two straight and one 90$#176;), which are included.

Benefits

• Uncompromising quality for the most demanding boaters
• Economical electric macerating marine toilet
• Simple and flexible installation for mounting above or below waterline
• Bowl can be rotated 90° for mounting into confined spaces and retrofit mounting
• Heavy-duty marine push-button switch included with all models
• Sea water models include an in-line strainer
• Pressurized freshwater models include vacuum breaker
• Fits 1½" (38mm) or 1" (25mm) discharge line with no adapters
• Easy to clean and maintain
• Can be run dry without damaging the pump
• Low power consumption and quieter operation for on-board pressurized freshwater models
• Can be used with on-board treatment systems (such as the Lectra/San®) and/or holding tanks
• Each unit is assembled by hand, individually tested and backed by Raritan’s one-year Limited Warranty and legendary technical support team

This model has a conversion kit, integral pump, straight discharge and runs on 12v

The SeaEra is an economical electric macerating toilet that fits into confined spaces. This toilet was designed to meet the needs of boaters.

Engineering has developed a new built-in discharge fitting that can accept either 1½" (38mm) or 1" (25mm) discharge lines without the need for an adapter. The SeaEra’s discharge pump can handle a vented loop with a maximum height of five feet (1.52m) and utilizes a full-sized joker valve to help avoid clogging.

The inlet pump can lift water from four feet (1.22m) below the toilet and can be run dry without damaging the pump. To simplify a new installation or a retrofit, water can be routed from either side of the inlet pump using interchangeable ¾" (19mm) hose barb fittings (two straight and one 90$#176;), which are included.

Benefits

• Uncompromising quality for the most demanding boaters
• Economical electric macerating marine toilet
• Simple and flexible installation for mounting above or below waterline
• Bowl can be rotated 90° for mounting into confined spaces and retrofit mounting
• Heavy-duty marine push-button switch included with all models
• Sea water models include an in-line strainer
• Pressurized freshwater models include vacuum breaker
• Fits 1½" (38mm) or 1" (25mm) discharge line with no adapters
• Easy to clean and maintain
• Can be run dry without damaging the pump
• Low power consumption and quieter operation for on-board pressurized freshwater models
• Can be used with on-board treatment systems (such as the Lectra/San®) and/or holding tanks
• Each unit is assembled by hand, individually tested and backed by Raritan’s one-year Limited Warranty and legendary technical support team

This model has a conversion kit, remote seawater pump, 90 degree discharge and runs on 12v

The SeaEra is an economical electric macerating toilet that fits into confined spaces. This toilet was designed to meet the needs of boaters.

Engineering has developed a new built-in discharge fitting that can accept either 1½" (38mm) or 1" (25mm) discharge lines without the need for an adapter. The SeaEra’s discharge pump can handle a vented loop with a maximum height of five feet (1.52m) and utilizes a full-sized joker valve to help avoid clogging.

The inlet pump can lift water from four feet (1.22m) below the toilet and can be run dry without damaging the pump. To simplify a new installation or a retrofit, water can be routed from either side of the inlet pump using interchangeable ¾" (19mm) hose barb fittings (two straight and one 90$#176;), which are included.

Benefits

• Uncompromising quality for the most demanding boaters
• Economical electric macerating marine toilet
• Simple and flexible installation for mounting above or below waterline
• Bowl can be rotated 90° for mounting into confined spaces and retrofit mounting
• Heavy-duty marine push-button switch included with all models
• Sea water models include an in-line strainer
• Pressurized freshwater models include vacuum breaker
• Fits 1½" (38mm) or 1" (25mm) discharge line with no adapters
• Easy to clean and maintain
• Can be run dry without damaging the pump
• Low power consumption and quieter operation for on-board pressurized freshwater models
• Can be used with on-board treatment systems (such as the Lectra/San®) and/or holding tanks
• Each unit is assembled by hand, individually tested and backed by Raritan’s one-year Limited Warranty and legendary technical support team

This model has a marine size bowl, freshwater solenoid, straight discharge and runs on 12v

The SeaEra is an economical electric macerating toilet that fits into confined spaces. This toilet was designed to meet the needs of boaters.

Engineering has developed a new built-in discharge fitting that can accept either 1½" (38mm) or 1" (25mm) discharge lines without the need for an adapter. The SeaEra’s discharge pump can handle a vented loop with a maximum height of five feet (1.52m) and utilizes a full-sized joker valve to help avoid clogging.

The inlet pump can lift water from four feet (1.22m) below the toilet and can be run dry without damaging the pump. To simplify a new installation or a retrofit, water can be routed from either side of the inlet pump using interchangeable ¾" (19mm) hose barb fittings (two straight and one 90$#176;), which are included.

Benefits

• Uncompromising quality for the most demanding boaters
• Economical electric macerating marine toilet
• Simple and flexible installation for mounting above or below waterline
• Bowl can be rotated 90° for mounting into confined spaces and retrofit mounting
• Heavy-duty marine push-button switch included with all models
• Sea water models include an in-line strainer
• Pressurized freshwater models include vacuum breaker
• Fits 1½" (38mm) or 1" (25mm) discharge line with no adapters
• Easy to clean and maintain
• Can be run dry without damaging the pump
• Low power consumption and quieter operation for on-board pressurized freshwater models
• Can be used with on-board treatment systems (such as the Lectra/San®) and/or holding tanks
• Each unit is assembled by hand, individually tested and backed by Raritan’s one-year Limited Warranty and legendary technical support team

This model has a marine size bowl, intregal pump, straight discharge and runs on 12v

The SeaEra is an economical electric macerating toilet that fits into confined spaces. This toilet was designed to meet the needs of boaters.

Engineering has developed a new built-in discharge fitting that can accept either 1½" (38mm) or 1" (25mm) discharge lines without the need for an adapter. The SeaEra’s discharge pump can handle a vented loop with a maximum height of five feet (1.52m) and utilizes a full-sized joker valve to help avoid clogging.

The inlet pump can lift water from four feet (1.22m) below the toilet and can be run dry without damaging the pump. To simplify a new installation or a retrofit, water can be routed from either side of the inlet pump using interchangeable ¾" (19mm) hose barb fittings (two straight and one 90$#176;), which are included.

Benefits

• Uncompromising quality for the most demanding boaters
• Economical electric macerating marine toilet
• Simple and flexible installation for mounting above or below waterline
• Bowl can be rotated 90° for mounting into confined spaces and retrofit mounting
• Heavy-duty marine push-button switch included with all models
• Sea water models include an in-line strainer
• Pressurized freshwater models include vacuum breaker
• Fits 1½" (38mm) or 1" (25mm) discharge line with no adapters
• Easy to clean and maintain
• Can be run dry without damaging the pump
• Low power consumption and quieter operation for on-board pressurized freshwater models
• Can be used with on-board treatment systems (such as the Lectra/San®) and/or holding tanks
• Each unit is assembled by hand, individually tested and backed by Raritan’s one-year Limited Warranty and legendary technical support team

This model has a marine size bowl, remote seawater pump, straight discharge and runs on 12v

The ’Hold n’ Treat’ is designed to integrate both a Type I and Type III MSD (Marine Sanitation Device) to provide the user with a system that will be legal in all areas. All system components can be purchased through Raritan or, make use of equipment that already exists on your vessel. Each complete system will consist of: a holding tank, waste transfer pump, key switch, controller and Lectra/San or Purasan.

All waste is stored in a holding tank and the lockout switch position will determine how the waste is processed. This system eliminates the need for visits to the pump-out station in most areas.

Benefits

• Components can be added to existing equipment
• Easy to install
• Two modes of operation - Automatic and Override
• All components are mounted outside of the tank
• System can accomodate up to 2 Type I Marine Sanitation Devices for large holding tank installations
• Waste is conveniently stored until it can be disposed of legally
• Eliminates trips to the pump-out station
• Lock-out switch prevents discharge of treated sewage in No Discharge Zones
• Allows vessels to discharge their holding tank legally!

• Control Module
• Lock-out Switch with 2 Keys
• Tank Sensor Module
• Pump Relay
• 5’ of Aluminum Tape

The ’Hold n’ Treat’ is designed to integrate both a Type I and Type III MSD (Marine Sanitation Device) to provide the user with a system that will be legal in all areas. All system components can be purchased through Raritan or, make use of equipment that already exists on your vessel. Each complete system will consist of: a holding tank, waste transfer pump, key switch, controller and Lectra/San or Purasan.

All waste is stored in a holding tank and the lockout switch position will determine how the waste is processed. This system eliminates the need for visits to the pump-out station in most areas.

Benefits

• Components can be added to existing equipment
• Easy to install
• Two modes of operation - Automatic and Override
• All components are mounted outside of the tank
• System can accomodate up to 2 Type I Marine Sanitation Devices for large holding tank installations
• Waste is conveniently stored until it can be disposed of legally
• Eliminates trips to the pump-out station
• Lock-out switch prevents discharge of treated sewage in No Discharge Zones
• Allows vessels to discharge their holding tank legally!

• Control Module
• Lock-out Switch with 2 Keys
• Tank Sensor Module
• Pump Relay
• 5’ of Aluminum Tape
• Macerator pump

Freedom from clogged toilets and marine size bowls, excellent performance even in commercial applications.

Standard Features

• One piece china bowl
• Anti-clog "power shred" discharge system
• Momentary operation activated by the sturdy stainless steel handle.
• 12V
• White household bowl
• Intregal pump

Benefits:

• Quiet "whisper flush" models available
• Simple flexible installation
• Heavy duty attractive stainless steel flush handle
• Low power consumption
• Three modes of operation - Fill, dry flush or fill and flush
• Handle with timer operation has "fail-safe" mode
• Easy to clean and maintain
• Diaphragm intake pump can be run dry
• Pressurized freshwater or raw water intake models
• Microprocessor control and solid state circuit breaker
• No fuses or relays inside the unit

Freedom from clogged toilets and marine size bowls, excellent performance even in commercial applications.

Standard Features

• One piece china bowl
• Anti-clog "power shred" discharge system
• Timed operation activated by the sturdy stainless steel handle. Equipped with a "fail-safe" mode if timer fails.
• 12V
• White household bowl
• Intregal pump

Benefits:

• Quiet "whisper flush" models available
• Simple flexible installation
• Heavy duty attractive stainless steel flush handle
• Low power consumption
• Three modes of operation - Fill, dry flush or fill and flush
• Handle with timer operation has "fail-safe" mode
• Easy to clean and maintain
• Diaphragm intake pump can be run dry
• Pressurized freshwater or raw water intake models
• Microprocessor control and solid state circuit breaker
• No fuses or relays inside the unit

Freedom from clogged toilets and marine size bowls, excellent performance even in commercial applications.

Standard Features

• One piece china bowl
• Anti-clog "power shred" discharge system
• Timed operation activated by the sturdy stainless steel handle. Equipped with a "fail-safe" mode if timer fails.
• 12V
• Bone household bowl
• Remote Seawater pump

Benefits:

• Quiet "whisper flush" models available
• Simple flexible installation
• Heavy duty attractive stainless steel flush handle
• Low power consumption
• Three modes of operation - Fill, dry flush or fill and flush
• Handle with timer operation has "fail-safe" mode
• Easy to clean and maintain
• Diaphragm intake pump can be run dry
• Pressurized freshwater or raw water intake models
• Microprocessor control and solid state circuit breaker
• No fuses or relays inside the unit

Freedom from clogged toilets and marine size bowls, excellent performance even in commercial applications.

Standard Features

• One piece china bowl
• Anti-clog "power shred" discharge system
• Timed operation activated by the sturdy stainless steel handle. Equipped with a "fail-safe" mode if timer fails.
• 12V
• White household bowl
• Freshwater solenoid

Benefits:

• Quiet "whisper flush" models available
• Simple flexible installation
• Heavy duty attractive stainless steel flush handle
• Low power consumption
• Three modes of operation - Fill, dry flush or fill and flush
• Handle with timer operation has "fail-safe" mode
• Easy to clean and maintain
• Diaphragm intake pump can be run dry
• Pressurized freshwater or raw water intake models
• Microprocessor control and solid state circuit breaker
• No fuses or relays inside the unit

Freedom from clogged toilets and marine size bowls, excellent performance even in commercial applications.

Standard Features

• One piece china bowl
• Anti-clog "power shred" discharge system
• Timed operation activated by the sturdy stainless steel handle. Equipped with a "fail-safe" mode if timer fails.
• 12V
• White household bowl
• Remote Seawater pump

Benefits:

• Quiet "whisper flush" models available
• Simple flexible installation
• Heavy duty attractive stainless steel flush handle
• Low power consumption
• Three modes of operation - Fill, dry flush or fill and flush
• Handle with timer operation has "fail-safe" mode
• Easy to clean and maintain
• Diaphragm intake pump can be run dry
• Pressurized freshwater or raw water intake models
• Microprocessor control and solid state circuit breaker
• No fuses or relays inside the unit

Freedom from clogged toilets and marine size bowls, excellent performance even in commercial applications.

Standard Features

• One piece china bowl
• Anti-clog "power shred" discharge system
• Timed operation activated by a wall touch pad. Allows for water saver feature using as little as 1 quart of water per flush.
• 12V
• White household bowl
• Intregal Pump

Benefits:

• Quiet "whisper flush" models available
• Simple flexible installation
• Heavy duty attractive stainless steel flush handle
• Low power consumption
• Three modes of operation - Fill, dry flush or fill and flush
• Handle with timer operation has "fail-safe" mode
• Easy to clean and maintain
• Diaphragm intake pump can be run dry
• Pressurized freshwater or raw water intake models
• Microprocessor control and solid state circuit breaker
• No fuses or relays inside the unit

Freedom from clogged toilets and marine size bowls, excellent performance even in commercial applications.

Standard Features

• One piece china bowl
• Anti-clog "power shred" discharge system
• Momentary operation activated by the sturdy stainless steel handle.
• 12V
• Bisque elongated bowl
• Intregal Pump

Benefits:

• Quiet "whisper flush" models available
• Simple flexible installation
• Heavy duty attractive stainless steel flush handle
• Low power consumption
• Three modes of operation - Fill, dry flush or fill and flush
• Handle with timer operation has "fail-safe" mode
• Easy to clean and maintain
• Diaphragm intake pump can be run dry
• Pressurized freshwater or raw water intake models
• Microprocessor control and solid state circuit breaker
• No fuses or relays inside the unit

The advanced crown head II was designed without compromising the high level of efficiency of the crown head. This was accomplished by redesigning the way water is delivered to the bowl. The raw water model uses a remote-mounted pump, while the on-board pressurized freshwater model is connected to the pressurized water system. As a result, the boater benefits from the same level of performance with quieter operation.

A newly designed pump cover blends with the porcelain bowl, creating a streamlined one-piece look. This cover neatly hides all the components while at the same time allows immediate access to the macerator and discharge pump.

The crown head II is built of the highest quality materials, is reliable and easy to maintain.

Benefits

• Suitable for the most demanding boaters in any size vessel
• Proven, dependable design (same efficiency as the crown head)
• Efficient flushing action - includes powerful centrifugal macerating pump
• Simple and flexible installation for mounting above or below waterline
• Quiet operation
• Easy to clean and maintain
• Pump cover that neatly hides components
• Can be used with on-board treatment systems (such as the Lectra/Sanr) and/or holding tanks
• Each unit is assembled by hand, individually tested and backed by Raritan’s one-year Limited Warranty and legendary technical support team

This models features:

• 90° Discharge
• White bowl, marine-size
• Remote Intake pump
• 12V

The advanced crown head II was designed without compromising the high level of efficiency of the crown head. This was accomplished by redesigning the way water is delivered to the bowl. The raw water model uses a remote-mounted pump, while the on-board pressurized freshwater model is connected to the pressurized water system. As a result, the boater benefits from the same level of performance with quieter operation.

A newly designed pump cover blends with the porcelain bowl, creating a streamlined one-piece look. This cover neatly hides all the components while at the same time allows immediate access to the macerator and discharge pump.

The crown head II is built of the highest quality materials, is reliable and easy to maintain.

Benefits

• Suitable for the most demanding boaters in any size vessel
• Proven, dependable design (same efficiency as the crown head)
• Efficient flushing action - includes powerful centrifugal macerating pump
• Simple and flexible installation for mounting above or below waterline
• Quiet operation
• Easy to clean and maintain
• Pump cover that neatly hides components
• Can be used with on-board treatment systems (such as the Lectra/Sanr) and/or holding tanks
• Each unit is assembled by hand, individually tested and backed by Raritan’s one-year Limited Warranty and legendary technical support team

This models features:

• 90° Discharge
• White bowl, household-style
• Remote Intake pump
• 12V

The crown head was Raritan’s first electric macerating toilet. Continual improvements to materials and design have made it the top choice for its quality, ruggedness and easy maintenance. By combining an efficient impeller intake pump with a powerful centrifugal discharge, the crown head establishes the standard for dependability.

The crown head’s efficiency is due not only to its high performance standards, but also to its easy-to-use, low maintenance design. For example, the built-in deodorant system not only deodorizes the bowl with every flush, but also lubricates the crown head’s working parts.

Front access to the macerator, a removable intake pump and a motor cover make the crown head exceptionally simple to maintain by offering quick and easy access to the components.

All these features combine to make the crown head an industry standard that is famous for its powerful centrifugal maceration and is ideal for treatment systems or holding tanks.

Benefits

• Suitable for demanding boaters who want reliability and low maintenance on any size vessel
• Classic, proven, dependable design that has continually been improved
• Efficient flushing action - includes powerful centrifugal macerating pump
• Simple and flexible installation for mounting above or below waterline
• Easy to clean and maintain
• Built-in deodorant system
• Can be used with on-board treatment systems (such as the Lectra/San®) and/or holding tanks
• Each unit is assembled by hand, individually tested and backed by
• Raritan’s one-year Limited Warranty and legendary technical support team

This Model Features

• White bowl marine-size
• 90° discharge
• 12V

Crown Head Deep Draft Repair Kit. Repair kit includes: 1234, 161107, C253, CH119MW, CH11, CH120, CH121, CH12, CH37E, CH44, CH57, CH59, CH7A, CH8, CH92, F149VT, G13W, G15, G4, M13, RNI and SL1CC.

Use with Push Button Switch to take high current load off switch. Reduces need for long runs of heavy wire. Continuous Duty Solenoid, 12 Volt.

Crown Head Standard Repair Kit. Repair Kit includes: 1234, 161107, CH117W, CH11, CH12, CH37E, CH57, CH59, CH7A, CH8, CH91, G13W, G15, G4, M13, RNI and SL1CC.

Compact II Repair Kit. Repair Kit includes: 1214B, 1226C, 1228CW, 1234, 1316MS, 1350W, 1353, 1356, 1357, C253, RNI and SL1CC.

Crown Head, CD Series Repair Kit. Repair Kit includes: 1203B, 1234, 161107, 31-102, C253, CH120, CH12, CH37E, CH57, CH59, CH7, CH8, CH92, G13W, G15, RNI and SL1CC.

The crown head was Raritan’s first electric macerating toilet. Continual improvements to materials and design have made it the top choice for its quality, ruggedness and easy maintenance. By combining an efficient impeller intake pump with a powerful centrifugal discharge, the crown head establishes the standard for dependability.

Electro Scan consistently controls the electrodes to reduce power consumption by up to 36%. New LCD display provides detailed information.

Control system designed to maximize performance

• Electrode amps are controlled by the system for optimum performance and reduced current draw
• An LCD display provides system status and diagnostic information
• Solid State Overload protection eliminates the fuses and relays, once tripped a simple reset will allow the unit to function again
• Historical data is stored on a board that is easily returned to the factory or dealer for download to a PC Environmentally Friendly
• U.S. Coast Guard approved Type I Marine Sanitation Device for vessels up to 65 feet in length
• Generates its own natural disinfectant from salt water
• Coated electrodes use salt water to kill bacteria and viruses without the addition of harmful chemicals
• Discharges with treatment levels that are safe for environmentally sensitive areas

Simple to Use

• One-step activation with toilet switch or system status panel automatically activates toilet and treatment system
• Eliminates the need for bulky holding tanks by treating with each flush
• Can be used with two marine toilets in most installations

PHEII, Electric Operation, White household-style bowl, 12V

The PHII and PHEII both operate by using a double action piston pump that simultaneously draws new flush water as it discharges the wastewater. By using raw water for flushing, on board water supplies can be reserved for essential freshwater use.

The PHII pump has a unique, easily replaceable seal cartridge. A simple quarter turn of the inlet water valve control knob allows the bowl to be pumped dry without using additional water. This provides the user with the option of emptying the bowl while in heavy seas. A special air vent reduces back pressure.

Electric PHEIIs operate by the push of a button and should be installed with a momentary or Push Button Switch (PBS) and a Continuous Duty Solenoid (CDS). In the case of power loss, the PHEII comes with a lever handle for temporary manual operation. Manual PHIIs can be easily converted to electric operation with a PHECKII Conversion Kit.

Benefits

• Good choice for sailboats and mid-size powerboats
• Simple design means economical, trouble-free quiet operation
• Powerful flushing action
• Simple and flexible installation for mounting above or below waterline
• Easy to clean and maintain
• Dry pumping is easier because air vent reduces back pressure
• Electric model can be switched to manual operation
• Double action piston pump simultaneously draws new flush water as it discharges the wastewater
• Can be used with on-board treatment systems (such as the Lectra/San®) and/or holding tanks
• Each unit is assembled by hand, individually tested and backed by Raritan’s one-year Limited Warranty and legendary technical support
  team

PHEII  Electric Operation, White marine-size bowl, 12V

The PHII and PHEII both operate by using a double action piston pump that simultaneously draws new flush water as it discharges the wastewater. By using raw water for flushing, on board water supplies can be reserved for essential freshwater use.

The PHII pump has a unique, easily replaceable seal cartridge. A simple quarter turn of the inlet water valve control knob allows the bowl to be pumped dry without using additional water. This provides the user with the option of emptying the bowl while in heavy seas. A special air vent reduces back pressure.

Electric PHEIIs operate by the push of a button and should be installed with a momentary or Push Button Switch (PBS) and a Continuous Duty Solenoid (CDS). In the case of power loss, the PHEII comes with a lever handle for temporary manual operation. Manual PHIIs can be easily converted to electric operation with a PHECKII Conversion Kit.

Benefits

• Good choice for sailboats and mid-size powerboats
• Simple design means economical, trouble-free quiet operation
• Powerful flushing action
• Simple and flexible installation for mounting above or below waterline
• Easy to clean and maintain
• Dry pumping is easier because air vent reduces back pressure
• Electric model can be switched to manual operation
• Double action piston pump simultaneously draws new flush water as it discharges the wastewater
• Can be used with on-board treatment systems (such as the Lectra/San®) and/or holding tanks
• Each unit is assembled by hand, individually tested and backed by Raritan’s one-year Limited Warranty and legendary technical support
  team

PHHBII Manual Operation, White household-style bowl

The PHII and PHEII both operate by using a double action piston pump that simultaneously draws new flush water as it discharges the wastewater. By using raw water for flushing, on board water supplies can be reserved for essential freshwater use.

The PHII pump has a unique, easily replaceable seal cartridge. A simple quarter turn of the inlet water valve control knob allows the bowl to be pumped dry without using additional water. This provides the user with the option of emptying the bowl while in heavy seas. A special air vent reduces back pressure.

Electric PHEIIs operate by the push of a button and should be installed with a momentary or Push Button Switch (PBS) and a Continuous Duty Solenoid (CDS). In the case of power loss, the PHEII comes with a lever handle for temporary manual operation. Manual PHIIs can be easily converted to electric operation with a PHECKII Conversion Kit.

Benefits

• Good choice for sailboats and mid-size powerboats
• Simple design means economical, trouble-free quiet operation
• Powerful flushing action
• Simple and flexible installation for mounting above or below waterline
• Easy to clean and maintain
• Dry pumping is easier because air vent reduces back pressure
• Electric model can be switched to manual operation
• Double action piston pump simultaneously draws new flush water as it discharges the wastewater
• Can be used with on-board treatment systems (such as the Lectra/San®) and/or holding tanks
• Each unit is assembled by hand, individually tested and backed by Raritan’s one-year Limited Warranty and legendary technical support
  team

PHII, Manual Operation, White marine-size bowl

The PHII and PHEII both operate by using a double action piston pump that simultaneously draws new flush water as it discharges the wastewater. By using raw water for flushing, on board water supplies can be reserved for essential freshwater use.

The PHII pump has a unique, easily replaceable seal cartridge. A simple quarter turn of the inlet water valve control knob allows the bowl to be pumped dry without using additional water. This provides the user with the option of emptying the bowl while in heavy seas. A special air vent reduces back pressure.

Electric PHEIIs operate by the push of a button and should be installed with a momentary or Push Button Switch (PBS) and a Continuous Duty Solenoid (CDS). In the case of power loss, the PHEII comes with a lever handle for temporary manual operation. Manual PHIIs can be easily converted to electric operation with a PHECKII Conversion Kit.

Benefits

• Good choice for sailboats and mid-size powerboats
• Simple design means economical, trouble-free quiet operation
• Powerful flushing action
• Simple and flexible installation for mounting above or below waterline
• Easy to clean and maintain
• Dry pumping is easier because air vent reduces back pressure
• Electric model can be switched to manual operation
• Double action piston pump simultaneously draws new flush water as it discharges the wastewater
• Can be used with on-board treatment systems (such as the Lectra/San®) and/or holding tanks
• Each unit is assembled by hand, individually tested and backed by Raritan’s one-year Limited Warranty and legendary technical support
  team

PH and PHE Repair Kit. Repair Kit includes: 1110, 1202, 1213A, 1213B, 1213C, 1213D, 1226C, 1228CW, 1232MS, 1234, C253, RNI and SL1CC.

PHII and PHEII Repair Kit. Repair Kit includes: 1201, 1202, 1203B1, 1203B2, 1203B3, 1213A, 1213B, 1213C, 1213D, 1226C, 1228CW, 1232MS, 1234, C253, RNI and SL1CC.

Onboard sewage treatment device for raw water. Neutralizes waste, making it sanitary and safe for boaters and marine life. Purasan Treatment System, for inlet pump toilets. Purasan, Type I MSD, 12Volt for use with Raw Water Pump.

Onboard sewage treatment device for fresh water. Neutralizes waste, making it sanitary and safe for boaters and marine life. Purasan Treatment System, for pressurized water. Purasan, Type I MSD, 12Volt for use with Pressurized Fresh Water and dual installations.