ProSportHD 15 Gen 4 - 15 Amp - 3-Bank Battery Charger

ProSportHD Generation 4 boasts a tri-surface heatsink design. This heavy-duty lightweight design delivers significantly faster charging through optimal cooling while delivering true rated amp output during charge mode. 

ProSportHD's enhanced microprocessor and software provide digital features including a fuel gauge style Charge Completion Monitor, Charge Mode, individual Fault indicators, and three digitally selectable performance charge profiles for Flooded (lead acid), AGM, and GEL batteries. HP AGM profile on ProSportHD 20 Dual only. 

Fully automatic 5-stage charging enhances battery performance while extending battery life. System Check OK and Battery Status indicators provide real-time installation and battery fault status. 

Designed for harsh environments with our industrial-grade jacketed DC and AC power cables which include molded strain reliefs and wire splitters. 

Features:

• ProMar Digital Technology Microprocessor and software-controlled charging technology for fast, precise charging
• Distributed-On-Demand™ Technology 100% of all available charging amps are utilized by distributing unused charging amps to any one or combination of all batteries as needed
• Heavy Duty Tri-Surface Extruded Heat Sink Design Upper, lower, and rear-facing heat sink design for optimal cooling while delivering true rated constant current charging amps during its two charge mode
• Expanded LED Display with Completion Status Gauge LED fuel gauge style completion status. Four-color multi-stage mode LED status bar. Multi-stage Charge Mode, System Check OK, individual Battery Status, and Battery Type indication
• Lightweight Design Up to 40% lighter compared to an epoxy-filled charger
• Auto-Maintain Energy Saver Mode Monitor and auto-maintain batteries only when needed to maintain a full state of charge. This significantly reduces AC power consumption
• Fully Automatic 5-Stage Digital Performance Charging 5 Stages: Analyzes, charges, conditions, auto maintains, and reconditions batteries once a month during storage periods. Fully charges and extends battery life
• Built-in Quality and Safety Dual inline waterproof fuses, reverse polarity, over-temperature, over-current, over-voltage and ignition protection. Certified to Marine UL 1236. CEC and DOE are listed. FCC Class B
• Easy installation and operation Pre-wired with 6’ AC and DC cables
• Battery Type: Group 24–31 Flooded, AGM, HP AGM and GEL batteries
• 3 Year Warranty

Specifications:

• DC Voltage Systems: 12/24v
• DC Output: Two 12VDC @ 15 amps, fully distributed
• Charging/Maintaining VDC Output: Up to 14.7VDC/13.8VDC
• Battery Types: Flooded (lead acid), AGM, or Gel
• AC Input: 120VAC +/-10%, 50/60Hz, 3A
• Amps: 15
• No. of Batteries: 3
• AC & DC Cable Length: 6 ft.
• Dimensions (inch): 10.5" x 7.9" x 2.9"

ProSportHD 10 Gen 4 - 10 Amp - 2-Bank Battery Charger

ProSportHD Generation 4 boasts a tri-surface heatsink design. This heavy-duty lightweight design delivers significantly faster charging through optimal cooling while delivering true rated amp output during charge mode. 

ProSportHD's enhanced microprocessor and software provide digital features including a fuel gauge style Charge Completion Monitor, Charge Mode, individual Fault indicators, and three digitally selectable performance charge profiles for Flooded (lead acid), AGM, and GEL batteries. HP AGM profile on ProSportHD 20 Dual only. 

Fully automatic 5-stage charging enhances battery performance while extending battery life. System Check OK and Battery Status indicators provide real-time installation and battery fault status. 

Designed for harsh environments with our industrial-grade jacketed DC and AC power cables which include molded strain reliefs and wire splitters. 

Features:

• ProMar Digital Technology Microprocessor and software-controlled charging technology for fast, precise charging
• Distributed-On-Demand™ Technology 100% of all available charging amps are utilized by distributing unused charging amps to any one or combination of all batteries as needed
• Heavy Duty Tri-Surface Extruded Heat Sink Design Upper, lower, and rear-facing heat sink design for optimal cooling while delivering true rated constant current charging amps during its two charge mode
• Expanded LED Display with Completion Status Gauge LED fuel gauge style completion status. Four-color multi-stage mode LED status bar. Multi-stage Charge Mode, System Check OK, individual Battery Status, and Battery Type indication
• Lightweight Design Up to 40% lighter compared to an epoxy-filled charger
• Auto-Maintain Energy Saver Mode Monitor and auto-maintain batteries only when needed to maintain a full state of charge. This significantly reduces AC power consumption
• Fully Automatic 5-Stage Digital Performance Charging 5 Stages: Analyzes, charges, conditions, auto maintains, and reconditions batteries once a month during storage periods. Fully charges and extends battery life
• Built-in Quality and Safety Dual inline waterproof fuses, reverse polarity, over-temperature, over-current, over-voltage and ignition protection. Certified to Marine UL 1236. CEC and DOE listed. FCC Class B
• Easy installation and operation Pre-wired with 6’ AC and DC cables
• Battery Type: Group 24–31 Flooded, AGM, HP AGM and GEL batteries
• 3 Year Warranty

Specifications:

• DC Voltage Systems: 12/24v
• DC Output: Two 12VDC @ 10 amps, fully distributed
• Charging/Maintaining VDC Output: Up to 14.7VDC/13.8VDC
• Battery Types: Flooded (lead acid), AGM, or Gel
• AC Input: 120VAC +/-10%, 50/60Hz, 3A
• Amps: 10
• No. of Batteries: 2
• AC & DC Cable Length: 6 ft.
• Dimensions (inch): 10.5" x 7.9" x 2.9"

Battery Isolator - 2 Alternator - 3 Battery - 130 AMP

ProMariner Battery Isolators with gold-plated terminals and improved efficiency, provide enhanced charging. Rated for use with DC devices ranging from 10 amps to 130 amps.

Battery Isolator - 2 Alternator - 2 Battery - 130 AMP

ProMariner Battery Isolators with gold-plated terminals and improved efficiency, provide enhanced charging. Rated for use with DC devices ranging from 10 amps to 130 amps.

Battery Isolator - 1 Alternator - 3 Battery - 130 AMP

ProMariner Battery Isolators with gold-plated terminals and improved efficiency, provide enhanced charging. Rated for use with DC devices ranging from 10 amps to 130 amps.

Battery Isolator - 1 Alternator - 2 Battery - 130 AMP

ProMariner Battery Isolators with gold-plated terminals and improved efficiency, provide enhanced charging. Rated for use with DC devices ranging from 10 amps to 130 amps.

Battery Isolator - 2 Alternator - 3 Battery - 70 AMP

ProMariner Battery Isolators with gold-plated terminals and improved efficiency, provide enhanced charging. Rated for use with DC devices ranging from 10 amps to 70 amps.

Battery Isolator - 2 Alternator - 2 Battery - 70 AMP

ProMariner Battery Isolators with gold-plated terminals and improved efficiency, provide enhanced charging. Rated for use with DC devices ranging from 10 amps to 70 amps.

Battery Isolator - 1 Alternator - 3 Battery - 70 AMP

ProMariner Battery Isolators with gold-plated terminals and improved efficiency, provide enhanced charging. Rated for use with DC devices ranging from 10 amps to 70 amps.

Battery Isolator - 1 Alternator - 2 Battery - 70 AMP

ProMariner Battery Isolators with gold-plated terminals and improved efficiency, provide enhanced charging. Rated for use with DC devices ranging from 10 amps to 70 amps.

ProTournamentelite 500 Battery Charger - 5 Bank - Global/CZone

With all of the innovation, performance, and features of the new ProTournamentelite series3 ProMariner has engineered the offering to include three high-power connected global models with ProMariner’s integrated Czone communication feature, which provides: battery chemistry, charge mode, real-time charging voltage, amperage, and fault status.

Features:

• IP67-sealed waterproof design
• Line of sight, charge status, AC glow plug
• Selectable Turbo Charge Mode
• Forced power flow cooling
• 4 digitally selectable charge profiles
• Dual-mode battery status monitor
• Distributed-On-Demand Technology™

Specifications:

• Volts: 12/24/36/48 + Eng
• Total Amps: 50
• Battery Banks: 5 
• Cable Length: 6 ft.
• Size (inch): 9.3" x 4.2" x 16.6"
• Weight: 18.0 pounds
• AC In/Max Amps: 100-240 VAC/10 A

ProTournamentelite 360 Battery Charger - 3 Bank - Global/CZone

With all of the innovation, performance, and features of the new ProTournamentelite series3 ProMariner has engineered the offering to include three high-power connected global models with ProMariner’s integrated Czone communication feature, which provides: battery chemistry, charge mode, real-time charging voltage, amperage, and fault status.

Features:

• IP67-sealed waterproof design
• Line of sight, charge status, AC glow plug
• Selectable Turbo Charge Mode
• Forced power flow cooling
• 4 digitally selectable charge profiles
• Dual-mode battery status monitor
• Distributed-On-Demand Technology™

Specifications:

• Volts: 12/24/36
• Total Amps: 36
• Battery Banks: 3 
• Cable Length: 6 ft.
• Size (inch): 9.3" x 4.2" x 14.7
• Weight: 16.1 pounds
• AC In/Max Amps: 100-240 VAC / 8 A

ProTournament Elite Wired Remote

Remotely monitor the charge status of the ProTournament Elite Battery Charger.

Features:

• Intuitive tri-color design allows for quick identification of battery charger stage
• Compatible with all models of ProTournament Elite Battery Chargers
• 12’ length

ProTournament 500 Elite Series3 5-Bank On-Board Marine Battery Charger

The ProTournamentelite series3 has been taken to the next level of design and performance, providing a competitive edge that will put you on the water first with power to last. With true rated output amperage and models up to 50 amps with Distributed-On-Demand™ charging Technology, ProTournament delivers the fastest charge times in its class. Designed to innovate and boasting 3 distinct industry 1st patent pending features.

Features:

• 50 Amp/Five Bank
• IP 67 Sealed Waterproof Design
• Line of Sight, Charge Status AC Glow Plug
• Selectable Turbo Charge Mode
• Forced Power Flow Cooling
• 4 Digitally Selectable Charge Profiles
• Dual Mode Battery Status Monitor
• Distributed-On-Demand Technology™

ProTournament 360 Elite Series3 4-Bank On-Board Marine Battery Charger

The ProTournamentelite series3 has been taken to the next level of design and performance, providing a competitive edge that will put you on the water first with power to last. With true rated output amperage and models up to 50 amps with Distributed-On-Demand™ charging Technology, ProTournament delivers the fastest charge times in its class. Designed to innovate and boasting 3 distinct industry 1st patent pending features.

Features:

• 36 Amp/Four Bank
• IP 67 Sealed Waterproof Design
• Line of Sight, Charge Status AC Glow Plug
• Selectable Turbo Charge Mode
• Forced Power Flow Cooling
• 4 Digitally Selectable Charge Profiles
• Dual Mode Battery Status Monitor
• Distributed-On-Demand Technology™

ProTournament 360 Elite Series3 3-Bank On-Board Marine Battery Charger

The ProTournament Elite Series3 has been taken to the next level of design and performance, providing a competitive edge that will put you on the water first with power to last. With true rated output amperage and models up to 50 amps with Distributed-On-Demand™ charging Technology, ProTournament delivers the fastest charge times in its class. Designed to innovate and boasting 3 distinct industry 1st patent pending features.

Features:

• 36 Amp/Three Bank
• IP 67 Sealed Waterproof Design
• Line of Sight, Charge Status AC Glow Plug
• Selectable Turbo Charge Mode
• Forced Power Flow Cooling
• 4 Digitally Selectable Charge Profiles
• Dual Mode Battery Status Monitor
• Distributed-On-Demand Technology™

ProTournament 240 Elite Series3 3-Bank On-Board Marine Battery Charger

The ProTournament Elite Series3 has been taken to the next level of design and performance, providing a competitive edge that will put you on the water first with power to last. With true rated output amperage and models up to 50 amps with Distributed-On-Demand™ charging Technology, ProTournament delivers the fastest charge times in its class. Designed to innovate and boasting 3 distinct industry 1st patent pending features.

Features:

• 24 Amp/Three Bank
• IP 67 Sealed Waterproof Design
• Line of Sight, Charge Status AC Glow Plug
• 4 Digitally Selectable Charge Profiles
• Dual Mode Battery Status Monitor
• Distributed-On-Demand Technology™

ProTournament 240 Elite Series3 4-Bank On-Board Marine Battery Charger

The ProTournament Elite Series3 has been taken to the next level of design and performance, providing a competitive edge that will put you on the water first with power to last. With true rated output amperage and models up to 50 amps with Distributed-On-Demand™ charging Technology, ProTournament delivers the fastest charge times in its class. Designed to innovate and boasting 3 distinct industry 1st patent pending features.

Features:

• 24 Amp/Four Bank
• IP 67 Sealed Waterproof Design
• Line of Sight, Charge Status AC Glow Plug
• 4 Digitally Selectable Charge Profiles
• Dual Mode Battery Status Monitor
• Distributed-On-Demand Technology™

ProTournament 240 Elite Series3 2-Bank On-Board Marine Battery Charger

The ProTournament Elite Series3 has been taken to the next level of design and performance, providing a competitive edge that will put you on the water first with power to last. With true rated output amperage and models up to 50 amps with Distributed-On-Demand™ charging Technology, ProTournament delivers the fastest charge times in its class. Designed to innovate and boasting 3 distinct industry 1st patent pending features.

Features:

• 24 Amp/Two Bank
• IP 67 Sealed Waterproof Design
• Line of Sight, Charge Status AC Glow Plug
• 4 Digitally Selectable Charge Profiles
• Dual Mode Battery Status Monitor
• Distributed-On-Demand Technology™

ProTechOne - 5 AMP - Corded

Features:

• Digital charging technology with fully automatic multi-stage digital charging
• Dedicated battery charging, detection, and control
• Battery monitor with LED fuel status indicator
• Waterproof DC safety fuse for maximum DC cable protection
• Protected ignition and FCC Class A for quiet operation without radio interference

ProTechOne - 5 AMP - AC Inlet

Features:

• Digital charging technology with fully automatic multi-stage digital charging
• Dedicated battery charging, detection, and control
• Battery monitor with LED fuel status indicator
• Waterproof DC safety fuse for maximum DC cable protection
• Protected ignition and FCC Class A for quiet operation without radio interference

ProTechOne - 4 AMP - Corded

ProMariner’s ProTechOne Fully Automatic Onboard Battery Charger and Maintainer utilizes the latest in microprocessor and software control charging and energy-saving auto maintain technology. Safe for short and long-term storage with multi-stage charging, conditioning, and auto maintaining proved to maximize battery performance and life. Designed for weatherproof applications and years of trouble-free use, ProTechOne boasts a gasket molded case design for outdoor use with commercial-grade jacketed AC and DC cables for maximum cable protection and durability. 

ProTechOne incorporates a push-to-test battery status monitor showing remaining battery power, in addition to fault detection of battery connections, reverse polarity, or battery too low to charge. In the event of a fault, both the Charging and Auto maintain LEDs will remain off. An angled easy-to-view LED dashboard provides the quick status of AC Power, Charge Mode, and Auto Maintain (Energy Saver) mode, which controls the charging output as needed to maintain a fully charged battery, lowering AC consumption and reducing operating cost.

Features:

• All-digital charging technology with fully-automatic multi-stage digital charging
• Dedicated battery charging, sensing, and control
• Push-to-test battery monitor LED fuel gauge status
• Waterproof DC safety fuse for maximum DC wire protection
• Ignition protected and FCC Class A for quiet operation and non-radio interference

ProTechOne - 4 AMP - AC Inlet

ProMariner’s ProTechOne Fully Automatic Onboard Battery Charger and Maintainer utilizes the latest in microprocessor and software control charging and energy-saving auto maintain technology. Safe for short and long-term storage with multi-stage charging, conditioning, and auto maintaining proved to maximize battery performance and life. Designed for weatherproof applications and years of trouble-free use, ProTechOne boasts a gasket molded case design for outdoor use with commercial-grade jacketed AC and DC cables for maximum cable protection and durability. 

ProTechOne incorporates a push-to-test battery status monitor showing remaining battery power, in addition to fault detection of battery connections, reverse polarity, or battery too low to charge. In the event of a fault, both the Charging and Auto maintain LEDs will remain off. An angled easy-to-view LED dashboard provides the quick status of AC Power, Charge Mode, and Auto Maintain (Energy Saver) mode, which controls the charging output as needed to maintain a fully charged battery, lowering AC consumption and reducing operating cost.

Features:

• All-digital charging technology with fully-automatic multi-stage digital charging
• Dedicated battery charging, sensing, and control
• Push-to-test battery monitor LED fuel gauge status
• Waterproof DC safety fuse for maximum DC wire protection
• Ignition protected and FCC Class A for quiet operation and non-radio interference

ProNautic 1260P Remote Temperature Sensor Probe 

Replacement for the ProNauticP temperature probe that comes standard with the ProNauticP.  Once the temperature sensor is connected to the charger, it will adjust its charge based on the batteries temperature.

Features:

• Plug and play functionality 

Technical Specifications:

• Connection (Battery End) - Ring terminal
• Connection (Charger End) - RJ45 style
• Cable length - 10’ (3 M)

*Sold as an Individual 

Universal AC Plug - White

No need to cut, strip or splice wires! Mount in an easy-to-reach location for safe AC power cord connection. Watertight and UV resistant cover.

Features:

• Converts plug holder to an AC inlet for ProMariner engineered chargers
• No cutting, stripping, or rewiring of AC power cord
• Watertight and UV resistant cover
• Easy to reach safe AC power cord connections
• Stainless steel mounting screws included

Universal AC Plug - Black

No need to cut, strip or splice wires! Mount in an easy-to-reach location for safe AC power cord connection. Watertight and UV resistant cover.

Features:

• Converts plug holder to an AC inlet for ProMariner engineered chargers
• No cutting, stripping, or rewiring of AC power cord
• Watertight and UV resistant cover
• Easy to reach safe AC power cord connections
• Stainless steel mounting screws included

C13 Plug Adapter - Europe

ProSportHD Global IEC 6’ power cord is compatible with available c13 plug adapters.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

C13 Plug Adapter - US

ProSportHD Global IEC 6’ power cord is compatible with available c13 plug adapters.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Universal DC Cable Extender - 15’

Universal design for all marine chargers with ring terminal cables. No cutting, stripping or splicing required.

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Universal DC Cable Extender - 5’

Universal design for all marine chargers with ring terminal cables. No cutting, stripping or splicing required.

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ProSportHD 20 Plus Global Gen 4 - 20 Amp - 3-Bank Battery Charger

*C13 Adapter Plug Required*

ProSportHD Generation 4 boasts a tri-surface heatsink design. This heavy-duty lightweight design delivers significantly faster charging through optimal cooling, while delivering true rated amp output during charge mode. 

ProSportHD’s enhanced microprocessor and software provides digital features including: fuel gauge style Charge Completion Monitor, Charge Mode, individual Fault indicators and three digitally selectable performance charge profiles for Flooded (lead acid), AGM and GEL batteries. HP AGM profile on ProSportHD 20 Dual only. 

Fully automatic 5-stage charging enhances battery performance while extending battery life. System Check OK and Battery Status indicators provide real time installation and battery fault status. 

Designed for use in harsh environments with our industrial grade jacketed DC and AC power cables which include molded strain reliefs and wire splitters. 

Features:

• ProMar Digital Technology Microprocessor and software controlled charging technology for fast, precise charging
• Distributed-On-Demand™ Technology 100% of all available charging amps are utilized by distributing unused charging amps to any one or combination of all batteries as needed
• Heavy Duty Tri-Surface Extruded Heat Sink Design Upper, lower and rear facing heat sink design for optimal cooling while delivering true rated constant current charging amps during its two charge mode
• Expanded LED Display with Completion Status Gauge LED fuel gauge style completion status. Four color multi-stage mode LED status bar. Multi-stage Charge Mode, System Check OK, individual Battery Status and Battery Type indication
• Lightweight Design Up to 40% lighter compared to an epoxy filled charger
• Auto-Maintain Energy Saver Mode Monitor and auto maintain batteries only when needed to maintain full state of charge. This significantly reduces AC power consumption
• Fully Automatic 5-Stage Digital Performance Charging 5 Stages: Analyzes, charges, conditions, auto maintains and reconditions batteries once a month during storage periods. Fully charges and extends battery life
• Built-in Quality and Safety Dual inline waterproof fuses, reverse polarity, over-temperature, over-current, over-voltage and ignition protection. Certified to Marine UL 1236. CEC and DOE listed. FCC Class B
• Easy Installation and Operation Pre-wired with 6’ AC and DC cables
• Battery Type: Group 24–31 Flooded, AGM, HP AGM and GEL batteries
• 3 Year Warranty

Specifications:

• DC Voltage Systems: 12/24/36v
• Amps: 20
• No. of Batteries: 3
• AC & DC Cable Length: 6’/6’/6’
• Size: 7.9" x 13.6" x 2.9"
• Weight: 8.8 lbs
• AC In: 100-240v AC 50/60Hz
• AC Plug: IEC C14

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ProSportHD 20 Global Gen 4 - 20 Amp - 2 Bank Battery Charger

*C13 Adapter Plug Required*

ProSportHD Generation 4 boasts a tri-surface heatsink design. This heavy-duty lightweight design delivers significantly faster charging through optimal cooling, while delivering true rated amp output during charge mode. 

ProSportHD’s enhanced microprocessor and software provides digital features including: fuel gauge style Charge Completion Monitor, Charge Mode, individual Fault indicators and three digitally selectable performance charge profiles for Flooded (lead acid), AGM and GEL batteries. HP AGM profile on ProSportHD 20 Dual only. 

Fully automatic 5-stage charging enhances battery performance while extending battery life. System Check OK and Battery Status indicators provide real time installation and battery fault status. 

Designed for use in harsh environments with our industrial grade jacketed DC and AC power cables which include molded strain reliefs and wire splitters. 

Features:

• ProMar Digital Technology Microprocessor and software controlled charging technology for fast, precise charging
• Distributed-On-Demand™ Technology 100% of all available charging amps are utilized by distributing unused charging amps to any one or combination of all batteries as needed
• Heavy Duty Tri-Surface Extruded Heat Sink Design Upper, lower and rear facing heat sink design for optimal cooling while delivering true rated constant current charging amps during its two charge mode
• Expanded LED Display with Completion Status Gauge LED fuel gauge style completion status. Four color multi-stage mode LED status bar. Multi-stage Charge Mode, System Check OK, individual Battery Status and Battery Type indication
• Lightweight Design Up to 40% lighter compared to an epoxy filled charger
• Auto-Maintain Energy Saver Mode Monitor and auto maintain batteries only when needed to maintain full state of charge. This significantly reduces AC power consumption
• Fully Automatic 5-Stage Digital Performance Charging 5 Stages: Analyzes, charges, conditions, auto maintains and reconditions batteries once a month during storage periods. Fully charges and extends battery life
• Built-in Quality and Safety Dual inline waterproof fuses, reverse polarity, over-temperature, over-current, over-voltage and ignition protection. Certified to Marine UL 1236. CEC and DOE listed. FCC Class B
• Easy Installation and Operation Pre-wired with 6’ AC and DC cables
• Battery Type: Group 24–31 Flooded, AGM, HP AGM and GEL batteries
• 3 Year Warranty

Specifications:

• DC Voltage Systems: 12/24v
• Amps: 20
• No. of Batteries: 2
• AC & DC Cable Length: 6’/6’
• Size: 7.9" x 13.6" x 2.9"
• Weight: 8.2 lbs
• AC In: 100-240v AC 50/60Hz
• AC Plug: IEC C14

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ProSportHD 12 Global Gen 4 - 12 Amp - 2 Bank Battery Charger

*C13 Adapter Plug Required*

ProSportHD Generation 4 boasts a tri-surface heatsink design. This heavy-duty lightweight design delivers significantly faster charging through optimal cooling, while delivering true rated amp output during charge mode. 

ProSportHD’s enhanced microprocessor and software provides digital features including: fuel gauge style Charge Completion Monitor, Charge Mode, individual Fault indicators and three digitally selectable performance charge profiles for Flooded (lead acid), AGM and GEL batteries. HP AGM profile on ProSportHD 20 Dual only. 

Fully automatic 5-stage charging enhances battery performance while extending battery life. System Check OK and Battery Status indicators provide real time installation and battery fault status. 

Designed for use in harsh environments with our industrial grade jacketed DC and AC power cables which include molded strain reliefs and wire splitters. 

Features:

• ProMar Digital Technology Microprocessor and software controlled charging technology for fast, precise charging
• Distributed-On-Demand™ Technology 100% of all available charging amps are utilized by distributing unused charging amps to any one or combination of all batteries as needed
• Heavy Duty Tri-Surface Extruded Heat Sink Design Upper, lower and rear facing heat sink design for optimal cooling while delivering true rated constant current charging amps during its two charge mode
• Expanded LED Display with Completion Status Gauge LED fuel gauge style completion status. Four color multi-stage mode LED status bar. Multi-stage Charge Mode, System Check OK, individual Battery Status and Battery Type indication
• Lightweight Design Up to 40% lighter compared to an epoxy filled charger
• Auto-Maintain Energy Saver Mode Monitor and auto maintain batteries only when needed to maintain full state of charge. This significantly reduces AC power consumption
• Fully Automatic 5-Stage Digital Performance Charging 5 Stages: Analyzes, charges, conditions, auto maintains and reconditions batteries once a month during storage periods. Fully charges and extends battery life
• Built-in Quality and Safety Dual inline waterproof fuses, reverse polarity, over-temperature, over-current, over-voltage and ignition protection. Certified to Marine UL 1236. CEC and DOE listed. FCC Class B
• Easy Installation and Operation Pre-wired with 6’ AC and DC cables
• Battery Type: Group 24–31 Flooded, AGM, HP AGM and GEL batteries
• 3 Year Warranty

Specifications:

• DC Voltage Systems: 12/24v
• Amps: 12
• No. of Batteries: 2
• AC & DC Cable Length: 6’/6’
• Size: 7.9" x 11.3" x 2.9"
• Weight: 6.4 lbs
• AC In: 100-240v AC 50/60Hz
• AC Plug: IEC C14

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ProSportHD 6 Global Gen 4 - 6 Amp - 1 Bank Battery Charger

*C13 Adapter Plug Required*

ProSportHD Generation 4 boasts a tri-surface heatsink design. This heavy-duty lightweight design delivers significantly faster charging through optimal cooling, while delivering true rated amp output during charge mode. 

ProSportHD’s enhanced microprocessor and software provides digital features including: fuel gauge style Charge Completion Monitor, Charge Mode, individual Fault indicators and three digitally selectable performance charge profiles for Flooded (lead acid), AGM and GEL batteries. HP AGM profile on ProSportHD 20 Dual only. 

Fully automatic 5-stage charging enhances battery performance while extending battery life. System Check OK and Battery Status indicators provide real time installation and battery fault status. 

Designed for use in harsh environments with our industrial grade jacketed DC and AC power cables which include molded strain reliefs and wire splitters. 

Features:

• ProMar Digital Technology Microprocessor and software controlled charging technology for fast, precise charging
• Distributed-On-Demand™ Technology 100% of all available charging amps are utilized by distributing unused charging amps to any one or combination of all batteries as needed
• Heavy Duty Tri-Surface Extruded Heat Sink Design Upper, lower and rear facing heat sink design for optimal cooling while delivering true rated constant current charging amps during its two charge mode
• Expanded LED Display with Completion Status Gauge LED fuel gauge style completion status. Four color multi-stage mode LED status bar. Multi-stage Charge Mode, System Check OK, individual Battery Status and Battery Type indication
• Lightweight Design Up to 40% lighter compared to an epoxy filled charger
• Auto-Maintain Energy Saver Mode Monitor and auto maintain batteries only when needed to maintain full state of charge. This significantly reduces AC power consumption
• Fully Automatic 5-Stage Digital Performance Charging 5 Stages: Analyzes, charges, conditions, auto maintains and reconditions batteries once a month during storage periods. Fully charges and extends battery life
• Built-in Quality and Safety Dual inline waterproof fuses, reverse polarity, over-temperature, over-current, over-voltage and ignition protection. Certified to Marine UL 1236. CEC and DOE listed. FCC Class B
• Easy Installation and Operation Pre-wired with 6’ AC and DC cables
• Battery Type: Group 24–31 Flooded, AGM, HP AGM and GEL batteries
• 3 Year Warranty

Specifications:

• DC Voltage Systems: 12v
• Amps: 6
• No. of Batteries: 1
• AC & DC Cable Length: 6’
• Size: 7.9" x 7.7" x 2.9"
• Weight: 3.8 lbs
• AC In: 100-240v AC 50/60Hz
• AC Plug: IEC C14

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ProSportHD 20 Plus Gen 4 - 20 Amp - 3 Bank Battery Charger

ProSportHD Generation 4 boasts a tri-surface heatsink design. This heavy-duty lightweight design delivers significantly faster charging through optimal cooling, while delivering true rated amp output during charge mode. 

ProSportHD’s enhanced microprocessor and software provides digital features including: fuel gauge style Charge Completion Monitor, Charge Mode, individual Fault indicators and three digitally selectable performance charge profiles for Flooded (lead acid), AGM and GEL batteries. HP AGM profile on ProSportHD 20 Dual only. 

Fully automatic 5-stage charging enhances battery performance while extending battery life. System Check OK and Battery Status indicators provide real time installation and battery fault status. 

Designed for use in harsh environments with our industrial grade jacketed DC and AC power cables which include molded strain reliefs and wire splitters. 

Features:

• ProMar Digital Technology Microprocessor and software controlled charging technology for fast, precise charging
• Distributed-On-Demand™ Technology 100% of all available charging amps are utilized by distributing unused charging amps to any one or combination of all batteries as needed
• Heavy Duty Tri-Surface Extruded Heat Sink Design Upper, lower and rear facing heat sink design for optimal cooling while delivering true rated constant current charging amps during its two charge mode
• Expanded LED Display with Completion Status Gauge LED fuel gauge style completion status. Four color multi-stage mode LED status bar. Multi-stage Charge Mode, System Check OK, individual Battery Status and Battery Type indication
• Lightweight Design Up to 40% lighter compared to an epoxy filled charger
• Auto-Maintain Energy Saver Mode Monitor and auto maintain batteries only when needed to maintain full state of charge. This significantly reduces AC power consumption
• Fully Automatic 5-Stage Digital Performance Charging 5 Stages: Analyzes, charges, conditions, auto maintains and reconditions batteries once a month during storage periods. Fully charges and extends battery life
• Built-in Quality and Safety Dual inline waterproof fuses, reverse polarity, over-temperature, over-current, over-voltage and ignition protection. Certified to Marine UL 1236. CEC and DOE listed. FCC Class B
• Easy Installation and Operation Pre-wired with 6’ AC and DC cables
• Battery Type: Group 24–31 Flooded, AGM, HP AGM and GEL batteries
• 3 Year Warranty

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ProSportHD 20 Gen 4 - 20 Amp - 2 Bank Battery Charger

ProSportHD Generation 4 boasts a tri-surface heatsink design. This heavy-duty lightweight design delivers significantly faster charging through optimal cooling, while delivering true rated amp output during charge mode. 

ProSportHD’s enhanced microprocessor and software provides digital features including: fuel gauge style Charge Completion Monitor, Charge Mode, individual Fault indicators and three digitally selectable performance charge profiles for Flooded (lead acid), AGM and GEL batteries. HP AGM profile on ProSportHD 20 Dual only. 

Fully automatic 5-stage charging enhances battery performance while extending battery life. System Check OK and Battery Status indicators provide real time installation and battery fault status. 

Designed for use in harsh environments with our industrial grade jacketed DC and AC power cables which include molded strain reliefs and wire splitters. 

Features:

• ProMar Digital Technology Microprocessor and software controlled charging technology for fast, precise charging
• Distributed-On-Demand™ Technology 100% of all available charging amps are utilized by distributing unused charging amps to any one or combination of all batteries as needed
• Heavy Duty Tri-Surface Extruded Heat Sink Design Upper, lower and rear facing heat sink design for optimal cooling while delivering true rated constant current charging amps during its two charge mode
• Expanded LED Display with Completion Status Gauge LED fuel gauge style completion status. Four color multi-stage mode LED status bar. Multi-stage Charge Mode, System Check OK, individual Battery Status and Battery Type indication
• Lightweight Design Up to 40% lighter compared to an epoxy filled charger
• Auto-Maintain Energy Saver Mode Monitor and auto maintain batteries only when needed to maintain full state of charge. This significantly reduces AC power consumption
• Fully Automatic 5-Stage Digital Performance Charging 5 Stages: Analyzes, charges, conditions, auto maintains and reconditions batteries once a month during storage periods. Fully charges and extends battery life
• Built-in Quality and Safety Dual inline waterproof fuses, reverse polarity, over-temperature, over-current, over-voltage and ignition protection. Certified to Marine UL 1236. CEC and DOE listed. FCC Class B
• Easy Installation and Operation Pre-wired with 6’ AC and DC cables
• Battery Type: Group 24–31 Flooded, AGM, HP AGM and GEL batteries
• 3 Year Warranty

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ProSportHD 12 Gen 4 - 12 Amp - 2 Bank Battery Charger

ProSportHD Generation 4 boasts a tri-surface heatsink design. This heavy-duty lightweight design delivers significantly faster charging through optimal cooling, while delivering true rated amp output during charge mode. 

ProSportHD’s enhanced microprocessor and software provides digital features including: fuel gauge style Charge Completion Monitor, Charge Mode, individual Fault indicators and three digitally selectable performance charge profiles for Flooded (lead acid), AGM and GEL batteries. HP AGM profile on ProSportHD 20 Dual only. 

Fully automatic 5-stage charging enhances battery performance while extending battery life. System Check OK and Battery Status indicators provide real time installation and battery fault status. 

Designed for use in harsh environments with our industrial grade jacketed DC and AC power cables which include molded strain reliefs and wire splitters. 

Features:

• ProMar Digital Technology Microprocessor and software controlled charging technology for fast, precise charging
• Distributed-On-Demand™ Technology 100% of all available charging amps are utilized by distributing unused charging amps to any one or combination of all batteries as needed
• Heavy Duty Tri-Surface Extruded Heat Sink Design Upper, lower and rear facing heat sink design for optimal cooling while delivering true rated constant current charging amps during its two charge mode
• Expanded LED Display with Completion Status Gauge LED fuel gauge style completion status. Four color multi-stage mode LED status bar. Multi-stage Charge Mode, System Check OK, individual Battery Status and Battery Type indication
• Lightweight Design Up to 40% lighter compared to an epoxy filled charger
• Auto-Maintain Energy Saver Mode Monitor and auto maintain batteries only when needed to maintain full state of charge. This significantly reduces AC power consumption
• Fully Automatic 5-Stage Digital Performance Charging 5 Stages: Analyzes, charges, conditions, auto maintains and reconditions batteries once a month during storage periods. Fully charges and extends battery life
• Built-in Quality and Safety Dual inline waterproof fuses, reverse polarity, over-temperature, over-current, over-voltage and ignition protection. Certified to Marine UL 1236. CEC and DOE listed. FCC Class B
• Easy Installation and Operation Pre-wired with 6’ AC and DC cables
• Battery Type: Group 24–31 Flooded, AGM, HP AGM and GEL batteries
• 3 Year Warranty

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ProSportHD 8 Gen 4 - 8 Amp - 2 Bank Battery Charger

ProSportHD Generation 4 boasts a tri-surface heatsink design. This heavy-duty lightweight design delivers significantly faster charging through optimal cooling, while delivering true rated amp output during charge mode. 

ProSportHD’s enhanced microprocessor and software provides digital features including: fuel gauge style Charge Completion Monitor, Charge Mode, individual Fault indicators and three digitally selectable performance charge profiles for Flooded (lead acid), AGM and GEL batteries. HP AGM profile on ProSportHD 20 Dual only. 

Fully automatic 5-stage charging enhances battery performance while extending battery life. System Check OK and Battery Status indicators provide real time installation and battery fault status. 

Designed for use in harsh environments with our industrial grade jacketed DC and AC power cables which include molded strain reliefs and wire splitters. 

Features:

• ProMar Digital Technology Microprocessor and software controlled charging technology for fast, precise charging
• Distributed-On-Demand™ Technology 100% of all available charging amps are utilized by distributing unused charging amps to any one or combination of all batteries as needed
• Heavy Duty Tri-Surface Extruded Heat Sink Design Upper, lower and rear facing heat sink design for optimal cooling while delivering true rated constant current charging amps during its two charge mode
• Expanded LED Display with Completion Status Gauge LED fuel gauge style completion status. Four color multi-stage mode LED status bar. Multi-stage Charge Mode, System Check OK, individual Battery Status and Battery Type indication
• Lightweight Design Up to 40% lighter compared to an epoxy filled charger
• Auto-Maintain Energy Saver Mode Monitor and auto maintain batteries only when needed to maintain full state of charge. This significantly reduces AC power consumption
• Fully Automatic 5-Stage Digital Performance Charging 5 Stages: Analyzes, charges, conditions, auto maintains and reconditions batteries once a month during storage periods. Fully charges and extends battery life
• Built-in Quality and Safety Dual inline waterproof fuses, reverse polarity, over-temperature, over-current, over-voltage and ignition protection. Certified to Marine UL 1236. CEC and DOE listed. FCC Class B
• Easy Installation and Operation Pre-wired with 6’ AC and DC cables
• Battery Type: Group 24–31 Flooded, AGM, HP AGM and GEL batteries
• 3 Year Warranty

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ProSportHD 6 Gen 4 - 6 Amp - 1 Bank Battery Charger

ProSportHD Generation 4 boasts a tri-surface heatsink design. This heavy-duty lightweight design delivers significantly faster charging through optimal cooling, while delivering true rated amp output during charge mode. 

ProSportHD’s enhanced microprocessor and software provides digital features including: fuel gauge style Charge Completion Monitor, Charge Mode, individual Fault indicators and three digitally selectable performance charge profiles for Flooded (lead acid), AGM and GEL batteries. HP AGM profile on ProSportHD 20 Dual only. 

Fully automatic 5-stage charging enhances battery performance while extending battery life. System Check OK and Battery Status indicators provide real time installation and battery fault status. 

Designed for use in harsh environments with our industrial grade jacketed DC and AC power cables which include molded strain reliefs and wire splitters. 

Features:

• ProMar Digital Technology Microprocessor and software controlled charging technology for fast, precise charging
• Distributed-On-Demand™ Technology 100% of all available charging amps are utilized by distributing unused charging amps to any one or combination of all batteries as needed
• Heavy Duty Tri-Surface Extruded Heat Sink Design Upper, lower and rear facing heat sink design for optimal cooling while delivering true rated constant current charging amps during its two charge mode
• Expanded LED Display with Completion Status Gauge LED fuel gauge style completion status. Four color multi-stage mode LED status bar. Multi-stage Charge Mode, System Check OK, individual Battery Status and Battery Type indication
• Lightweight Design Up to 40% lighter compared to an epoxy filled charger
• Auto-Maintain Energy Saver Mode Monitor and auto maintain batteries only when needed to maintain full state of charge. This significantly reduces AC power consumption
• Fully Automatic 5-Stage Digital Performance Charging 5 Stages: Analyzes, charges, conditions, auto maintains and reconditions batteries once a month during storage periods. Fully charges and extends battery life
• Built-in Quality and Safety Dual inline waterproof fuses, reverse polarity, over-temperature, over-current, over-voltage and ignition protection. Certified to Marine UL 1236. CEC and DOE listed. FCC Class B
• Easy Installation and Operation Pre-wired with 6’ AC and DC cables
• Battery Type: Group 24–31 Flooded, AGM, HP AGM and GEL batteries
• 3 Year Warranty

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ProMar1 DS Digital - 15 Amp - 3 Bank Charger

ProMar1 DS Generation 3 reflects a new outward design taken to the next level in performance with its all Digital Charging Technology. Fully Automatic with a 4-Stage Digital Charging algorithm proven to extend battery life. Sequential modes of Analyzing, Charging, Conditioning and a built-in Auto Maintain mode, safe for short and long term storage periods ensures your batteries are fully charged and maintained.

Features:

• Fully Automatic 4-Stage Charging
• Dual Mode Charge Status Indicator
• Battery & Wiring Fault Detection
• Rugged Shockproof Construction
• Auto Maintain/Energy Saver Mode Extends Battery Life
• Sage for Long and Short Term Storage
• Pre-Wired with Waterproof Inline DC Fuses and Nickel Plated Copper Ring Terminals
• Built-in Safety
• Quiet EMI Design Meets US FCC Emissions Requirements

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ProMar1 DS Digital - 10 Amp - 2 Bank Charger

ProMar1 DS Generation 3 reflects a new outward design taken to the next level in performance with its all Digital Charging Technology. Fully Automatic with a 4-Stage Digital Charging algorithm proven to extend battery life. Sequential modes of Analyzing, Charging, Conditioning and a built-in Auto Maintain mode, safe for short and long term storage periods ensures your batteries are fully charged and maintained.

Features:

• Fully Automatic 4-Stage Charging
• Dual Mode Charge Status Indicator
• Battery & Wiring Fault Detection
• Rugged Shockproof Construction
• Auto Maintain/Energy Saver Mode Extends Battery Life
• Safe for Long and Short Term Storage
• Pre-Wired with Waterproof Inline DC Fuses and Nickel Plated Copper Ring Terminals
• Built-in Safety
• Quiet EMI Design Meets US FCC Emissions Requirements

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ProMar1 DS Digital - 5 Amp - 1 Bank Charger

ProMar1 DS Generation 3 reflects a new outward design taken to the next level in performance with its all Digital Charging Technology. Fully Automatic with a 4-Stage Digital Charging algorithm proven to extend battery life. Sequential modes of Analyzing, Charging, Conditioning and a built-in Auto Maintain mode, safe for short and long term storage periods ensures your batteries are fully charged and maintained.

Features:

• Fully Automatic 4-Stage Chargin
• Dual Mode Charge Status Indicator
• Battery & Wiring Fault Detection
• Rugged Shockproof Construction
• Auto Maintain/Energy Save Mode Extends Battery Life
• Safe for Long and Short Term Storage
• Pre-Wired with Waterproof Inline DC Fuses and Nickel Plated Copper Ring Terminals
• Built-in Safety
• Quiet EMI Design meets US FCC Emissions Requirements

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

TruePower Plus Series - Modified Sine Wave Inverter - 2000W

Heavy Duty Marine, Mobile and Industrial Grade Inverters

Our next generation of TruePower Plus Inverters are designed to convert 12V DC battery power to 115V AC and will automatically pass through AC Inlet power when present. TruePower Plus is rich with features including; Innovative dual color digital LCD message center, dual color gauges for AC power output and battery DC input, USB power port, GFCI convenience outlets, DC cable covers, and separate on/off remote. Our integrated AC cable strain reliefs and front screw connection terminal blocks allow for quick and easy installation without the added need for ring terminals for AC power connections.

Designed with soft start noise filtered technology and x2 surge capability for powering demanding loads. Shock resistant construction with internal conformal coated electronics for protection in harsh environments.

Features:

• Intuitive dual color digital LCD message center
• Dual color gauges for AC power output and battery DC input
• Internal 30 amp AC transfer switch will automatically pass through AC inlet power when present
• USB power port and GFCI convenience outlets
• Compact and lightweight design
• Soft start noise filtered technology with x2 surge capability
• On/Off remote with 9 foot cable and DC cable covers Included
• Integrated AC power cable strain reliefs for ease of installation
• Built-in safety with overload, over temperature, short circuit and reverse polarity protection
• Audible alarm and shut down for low and high DC voltage, overload and over temperature conditions.
• Shock resistant construction with internal conformal coated electronics
• 2 year warranty

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

TruePower Plus Series - Pure Sine Wave Inverter - 2000W

Heavy Duty Marine, Mobile and Industrial Grade Inverters

Our next generation of TruePower Plus Inverters are designed to convert 12V DC battery power to 115V AC and will automatically pass through AC Inlet power when present. TruePower Plus is rich with features including; Innovative dual color digital LCD message center, dual color gauges for AC power output and battery DC input, USB power port, GFCI convenience outlets, DC cable covers, and separate on/off remote. Our integrated AC cable strain reliefs and front screw connection terminal blocks allow for quick and easy installation without the added need for ring terminals for AC power connections.

Designed with soft start noise filtered technology and x2 surge capability for powering demanding loads. Shock resistant construction with internal conformal coated electronics for protection in harsh environments.
The TruePower Plus PS Series has all the features of our MS series but provides a Pure Sine 115V AC output ideal for high fidelity audio visual systems in addition to appliances with hysteresis and variable motor speed controls like washing machines and refrigeration etc.

Features:

• Intuitive dual color digital LCD message center
• Dual color gauges for AC power output and battery DC input
• Internal 30 amp AC transfer switch will automatically pass through AC inlet power when present
• USB power port and GFCI convenience outlets
• Compact and lightweight design
• Soft start noise filtered technology with x2 surge capability
• On/Off remote with 9 foot cable and DC cable covers Included
• Integrated AC power cable strain reliefs for ease of installation
• Built-in safety with overload, over temperature, short circuit and reverse polarity protection
• Audible alarm and shut down for low and high DC voltage, overload and over temperature conditions.
• Shock resistant construction with internal conformal coated electronics
• 2 year warranty

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

TruePower Plus Pure Sine Wave Inverter - 1000W

Designed to convert 12 VDC battery power to 115 VAC and will automatically pass through AC Inlet power when present. TruePower Plus is rich with features including; Innovative dual color digital LCD message center, dual color gauges for AC power output and battery DC input, USB power port, GFCI convenience outlets, DC cable covers, and separate on/off remote. Our integrated AC cable strain reliefs and front screw connection terminal blocks allow for quick and easy installation without the added need for ring terminals for AC power connections. Designed with soft start noise filtered technology and x2 surge capability for powering demanding loads. Shock resistant construction with internal conformal coated electronics for protection in harsh environments. The TruePower Plus PS Series has all the features of our MS series but provides a Pure Sine 115 VAC output ideal for high fidelity audio visual systems in addition to appliances with hysteresis and variable motor speed controls like washing machines and refrigeration etc.

Features:

• Intuitive dual color digital LCD message center
  
• Dual color gauges for AC power output and battery DC input
  
• Internal 30 amp AC transfer switch will automatically pass through AC inlet power when present
  
• USB power port and GFCI convenience outlets
  
• Compact and lightweight design
  
• Soft start noise filtered technology with x2 surge capability
  
• On/Off remote with 9 foot cable and DC cable covers Included
  
• Integrated AC power cable strain reliefs for ease of installation
  
• Built-in safety with overload, over temperature, short circuit and reverse polarity protection
  
• Audible alarm and shut down for low and high DC voltage, overload and over temperature conditions
  
• Shock resistant construction with internal conformal coated electronics
  
• 2 year warranty

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

TruePower Plus Modified Sine Wave Inverter - 1500W

Designed to convert 12 VDC battery power to 115 VAC and will automatically pass through AC Inlet power when present. TruePower Plus is rich with features including; Innovative dual color digital LCD message center, dual color gauges for AC power output and battery DC input, USB power port, GFCI convenience outlets, DC cable covers, and separate on/off remote. Our integrated AC cable strain reliefs and front screw connection terminal blocks allow for quick and easy installation without the added need for ring terminals for AC power connections. Designed with soft start noise filtered technology and x2 surge capability for powering demanding loads. Shock resistant construction with internal conformal coated electronics for protection in harsh environments.

Features:

• Intuitive dual color digital LCD message center
  
• Dual color gauges for AC power output and battery DC input
  
• Internal 30 amp AC transfer switch will automatically pass through AC inlet power when present
  
• USB power port and GFCI convenience outlets
  
• Compact and lightweight design
  
• Soft start noise filtered technology with x2 surge capability
  
• On/Off remote with 9 foot cable and DC cable covers Included
  
• Integrated AC power cable strain reliefs for ease of installation
  
• Built-in safety with overload, over temperature, short circuit and reverse polarity protection
  
• Audible alarm and shut down for low and high DC voltage, overload and over temperature conditions
  
• Shock resistant construction with internal conformal coated electronics
  
• 2 year warranty

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

TruePower Plus Modified Sine Wave Inverter - 1200W

Designed to convert 12 VDC battery power to 115 VAC and will automatically pass through AC Inlet power when present. TruePower Plus is rich with features including; Innovative dual color digital LCD message center, dual color gauges for AC power output and battery DC input, USB power port, GFCI convenience outlets, DC cable covers, and separate on/off remote. Our integrated AC cable strain reliefs and front screw connection terminal blocks allow for quick and easy installation without the added need for ring terminals for AC power connections. Designed with soft start noise filtered technology and x2 surge capability for powering demanding loads. Shock resistant construction with internal conformal coated electronics for protection in harsh environments.

Features:

• Intuitive dual color digital LCD message center
  
• Dual color gauges for AC power output and battery DC input
  
• Internal 30 amp AC transfer switch will automatically pass through AC inlet power when present
  
• USB power port and GFCI convenience outlets
  
• Compact and lightweight design
  
• Soft start noise filtered technology with x2 surge capability
  
• On/Off remote with 9 foot cable and DC cable covers Included
  
• Integrated AC power cable strain reliefs for ease of installation
  
• Built-in safety with overload, over temperature, short circuit and reverse polarity protection
  
• Audible alarm and shut down for low and high DC voltage, overload and over temperature conditions
  
• Shock resistant construction with internal conformal coated electronics
  
• 2 year warranty

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ProSport 1.5A Multi-Use Maintainer - 120V - 1-Bank

ProSport 1.5 Amp fully automatic maintainer is an innovative multi-use charger designed for maximum utility. Concealed mounting holes allow the ProSport 1.5 to be installed on-board or to be used as a portable, with rear die cut foam resting pad. Ring terminal and DC clamp quick connect cable assemblies included. Our marine grade design is weatherproof, water resistant to IP 65 and can be used in all fresh and salt water outdoor and indoor applications as needed. Designed to keep 12V batteries fully charged during short or long term storage periods, ProSport’s Energy Saver mode will monitor and auto maintain a battery when needed to maintain a full state of charge. ProSport 1.5 significantly reduces AC Power consumption, lowers operating costs and maximizes reserve power performance.

Features:

• Fully automatic energy saving design
  
• Multi-use design, easily configures for on-board or portable use
  
• Concealed mounting holes & die cut foam resting pad for portable use
  
• Expanded LED display for Power, Charging and Auto Maintain status
  
• Maintain 12V lead acid (sealed & vented) batteries up to 150A hours
  
• Quick connect DC clamp & ring terminal cable assemblies
  
• Weatherproof and water resistant to IP65
  
• Built-in safety with reverse polarity, short circuit, temperature and ignition protection
  
• Pre-wired for easy installation
  
• 3 year warranty
  
• Meets UL 1236 and CSA Standards, cETLus

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ProTournament Remote

Tri-color charge mode status.

Cable length: 12’

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ProNautic P Helm Remote Control & Digital Display
Part #: 63100

Features:

• Designed for use with ProNauticP Series Battery Chargers
  
• Cable Length: 10 meters (33 feet)
  
• Designed for indoor use only

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ProIsoCharge Series

Model ProIsoCharge250 1•3
Part No. 23126
System Volts DC 12
Max DC Amps 250 Amp
Alternator Input1
Battery Outputs 3
Size 8.875"(l) x 5.875"(w) x 3.125"(h)
Weight6 lbs

Significantly Smarter...
ProIsoCharge delivers digitally controlled alternator output distribution while protecting the health of engine start batteries. An industry changing design that provides intelligent and zero voltage loss isolation, charging of up to 3 other battery banks off a single alternator (model specific). For dual engine applications, ProIsoCharge offers an exclusive 2 alternator input model with up to 4 battery banks. Smart enough to provide priority charging to a battery bank that’s under load by taking fully charged batteries off line. The all-in-one design eliminates the need for multiple voltage sensitive relays to charge multiple battery banks simultaneously, saving space, installation time and cost. Ensuring fully charged batteries and faster charge times, ProIsocharge eliminates the typical alternator voltage loss of 0.6VDC that’s commonly associated with traditional diode based isolators. Installed with the ProNauticP Series, a boat owner can enjoy the full benefit of shore power and on the water charging. Designed to provide more time on the water enjoying what you like most... boating.

Intelligent Alternator Power Distribution System

ProMar Digital Performance Zero Volt Loss Isolation and Charging
All digital design delivers active battery status and automatic engine battery healthpriority while digitally distributing the full output of your engine’s alternators.

Intelligent Isolation and Charging Software Control
ProIsoCharge’s intelligent software control provides priority charging to a battery bank thatis under load (i.e house bank or power inverter bank) by taking fully charged batteries off lineand priority charging discharged battery banks, while insuring the health of the engine batteries.

Real Time LED Status Indicators
Highly visible LEDs to indicate alternator power is present and battery bank charging status.Fault LEDs include: high and low alternator output, over-voltage protection and high voltageconditions that may be present on any one of the battery banks connected (that are alsoconnected to other charging sources gen set combi etc).

Ignition Controlled
Distributed On Demand™ battery bank management will only activatewith ignition power on.

Advance Regulator Ready
Advance regulator remote sense connection provided for precision alternatoralgorithm control for alternators equipped with an advanced regulator.

Easy Installation
Modular design for easy install. Includes all terminal stud insulator bootsand protective snap on safety cover.

Built-in Safety
Ignition protected and waterproof to IP66. FIVE YEAR

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ProIsoCharge Series

Model ProIsoCharge180 1•3
Part No. 23125
System Volts DC 12
Max DC Amps 180 Amp
Alternator Input1
Battery Outputs 3
Size 7.55"(l) x 5.875"(w) x 3.125"(h)
Weight5 lbs

Significantly Smarter...
ProIsoCharge delivers digitally controlled alternator output distribution while protecting the health of engine start batteries. An industry changing design that provides intelligent and zero voltage loss isolation, charging of up to 3 other battery banks off a single alternator (model specific). For dual engine applications, ProIsoCharge offers an exclusive 2 alternator input model with up to 4 battery banks. Smart enough to provide priority charging to a battery bank that’s under load by taking fully charged batteries off line. The all-in-one design eliminates the need for multiple voltage sensitive relays to charge multiple battery banks simultaneously, saving space, installation time and cost. Ensuring fully charged batteries and faster charge times, ProIsocharge eliminates the typical alternator voltage loss of 0.6VDC that’s commonly associated with traditional diode based isolators. Installed with the ProNauticP Series, a boat owner can enjoy the full benefit of shore power and on the water charging. Designed to provide more time on the water enjoying what you like most... boating.

Intelligent Alternator Power Distribution System

ProMar Digital Performance Zero Volt Loss Isolation and Charging
All digital design delivers active battery status and automatic engine battery healthpriority while digitally distributing the full output of your engine’s alternators.

Intelligent Isolation and Charging Software Control
ProIsoCharge’s intelligent software control provides priority charging to a battery bank thatis under load (i.e house bank or power inverter bank) by taking fully charged batteries off lineand priority charging discharged battery banks, while insuring the health of the engine batteries.

Real Time LED Status Indicators
Highly visible LEDs to indicate alternator power is present and battery bank charging status.Fault LEDs include: high and low alternator output, over-voltage protection and high voltageconditions that may be present on any one of the battery banks connected (that are alsoconnected to other charging sources gen set combi etc).

Ignition Controlled
Distributed On Demand™ battery bank management will only activatewith ignition power on.

Advance Regulator Ready
Advance regulator remote sense connection provided for precision alternatoralgorithm control for alternators equipped with an advanced regulator.

Easy Installation
Modular design for easy install. Includes all terminal stud insulator bootsand protective snap on safety cover.

Built-in Safety
Ignition protected and waterproof to IP66. FIVE YEAR

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ProIsoCharge Series

Model ProIsoCharge120 1•3
Part No. 23124
System Volts DC 12
Max DC Amps 120 Amp
Alternator Input1
Battery Outputs 3
Size 6.15"(l) x 5.875"(w) x 3.125"(h)
Weight3 lbs

Significantly Smarter...
ProIsoCharge delivers digitally controlled alternator output distribution while protecting the health of engine start batteries. An industry changing design that provides intelligent and zero voltage loss isolation, charging of up to 3 other battery banks off a single alternator (model specific). For dual engine applications, ProIsoCharge offers an exclusive 2 alternator input model with up to 4 battery banks. Smart enough to provide priority charging to a battery bank that’s under load by taking fully charged batteries off line. The all-in-one design eliminates the need for multiple voltage sensitive relays to charge multiple battery banks simultaneously, saving space, installation time and cost. Ensuring fully charged batteries and faster charge times, ProIsocharge eliminates the typical alternator voltage loss of 0.6VDC that’s commonly associated with traditional diode based isolators. Installed with the ProNauticP Series, a boat owner can enjoy the full benefit of shore power and on the water charging. Designed to provide more time on the water enjoying what you like most... boating.

Intelligent Alternator Power Distribution System

ProMar Digital Performance Zero Volt Loss Isolation and Charging
All digital design delivers active battery status and automatic engine battery healthpriority while digitally distributing the full output of your engine’s alternators.

Intelligent Isolation and Charging Software Control
ProIsoCharge’s intelligent software control provides priority charging to a battery bank thatis under load (i.e house bank or power inverter bank) by taking fully charged batteries off lineand priority charging discharged battery banks, while insuring the health of the engine batteries.

Real Time LED Status Indicators
Highly visible LEDs to indicate alternator power is present and battery bank charging status.Fault LEDs include: high and low alternator output, over-voltage protection and high voltageconditions that may be present on any one of the battery banks connected (that are alsoconnected to other charging sources gen set combi etc).

Ignition Controlled
Distributed On Demand™ battery bank management will only activatewith ignition power on.

Advance Regulator Ready
Advance regulator remote sense connection provided for precision alternatoralgorithm control for alternators equipped with an advanced regulator.

Easy Installation
Modular design for easy install. Includes all terminal stud insulator bootsand protective snap on safety cover.

Built-in Safety
Ignition protected and waterproof to IP66. FIVE YEAR

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ProIsoCharge Series

Model ProIsoCharge180 1•2
Part No. 23122
System Volts DC 12
Max DC Amps 180 Amp
Alternator Input1
Battery Outputs 2
Size 6.15"(l) x 5.875"(w) x 3.125"(h)
Weight3 lbs

Significantly Smarter...
ProIsoCharge delivers digitally controlled alternator output distribution while protecting the health of engine start batteries. An industry changing design that provides intelligent and zero voltage loss isolation, charging of up to 3 other battery banks off a single alternator (model specific). For dual engine applications, ProIsoCharge offers an exclusive 2 alternator input model with up to 4 battery banks. Smart enough to provide priority charging to a battery bank that’s under load by taking fully charged batteries off line. The all-in-one design eliminates the need for multiple voltage sensitive relays to charge multiple battery banks simultaneously, saving space, installation time and cost. Ensuring fully charged batteries and faster charge times, ProIsocharge eliminates the typical alternator voltage loss of 0.6VDC that’s commonly associated with traditional diode based isolators. Installed with the ProNauticP Series, a boat owner can enjoy the full benefit of shore power and on the water charging. Designed to provide more time on the water enjoying what you like most... boating.

Intelligent Alternator Power Distribution System

ProMar Digital Performance Zero Volt Loss Isolation and Charging
All digital design delivers active battery status and automatic engine battery healthpriority while digitally distributing the full output of your engine’s alternators.

Intelligent Isolation and Charging Software Control
ProIsoCharge’s intelligent software control provides priority charging to a battery bank thatis under load (i.e house bank or power inverter bank) by taking fully charged batteries off lineand priority charging discharged battery banks, while insuring the health of the engine batteries.

Real Time LED Status Indicators
Highly visible LEDs to indicate alternator power is present and battery bank charging status.Fault LEDs include: high and low alternator output, over-voltage protection and high voltageconditions that may be present on any one of the battery banks connected (that are alsoconnected to other charging sources gen set combi etc).

Ignition Controlled
Distributed On Demand™ battery bank management will only activatewith ignition power on.

Advance Regulator Ready
Advance regulator remote sense connection provided for precision alternatoralgorithm control for alternators equipped with an advanced regulator.

Easy Installation
Modular design for easy install. Includes all terminal stud insulator bootsand protective snap on safety cover.

Built-in Safety
Ignition protected and waterproof to IP66. FIVE YEAR

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ProIsoCharge Series

ModelProIsoCharge120 1•2
Part No. 23121
System Volts DC 12
Max DC Amps 120 Amp
Alternator Input1
Battery Outputs 2
Size 5.35"(l) x 5.875"(w) x 3.125"(h)
Weight2 lbs

Significantly Smarter...
ProIsoCharge delivers digitally controlled alternator output distribution while protecting the health of engine start batteries. An industry changing design that provides intelligent and zero voltage loss isolation, charging of up to 3 other battery banks off a single alternator (model specific). For dual engine applications, ProIsoCharge offers an exclusive 2 alternator input model with up to 4 battery banks. Smart enough to provide priority charging to a battery bank that’s under load by taking fully charged batteries off line. The all-in-one design eliminates the need for multiple voltage sensitive relays to charge multiple battery banks simultaneously, saving space, installation time and cost. Ensuring fully charged batteries and faster charge times, ProIsocharge eliminates the typical alternator voltage loss of 0.6VDC that’s commonly associated with traditional diode based isolators. Installed with the ProNauticP Series, a boat owner can enjoy the full benefit of shore power and on the water charging. Designed to provide more time on the water enjoying what you like most... boating.

Intelligent Alternator Power Distribution System

ProMar Digital Performance Zero Volt Loss Isolation and Charging
All digital design delivers active battery status and automatic engine battery healthpriority while digitally distributing the full output of your engine’s alternators.

Intelligent Isolation and Charging Software Control
ProIsoCharge’s intelligent software control provides priority charging to a battery bank thatis under load (i.e house bank or power inverter bank) by taking fully charged batteries off lineand priority charging discharged battery banks, while insuring the health of the engine batteries.

Real Time LED Status Indicators
Highly visible LEDs to indicate alternator power is present and battery bank charging status.Fault LEDs include: high and low alternator output, over-voltage protection and high voltageconditions that may be present on any one of the battery banks connected (that are alsoconnected to other charging sources gen set combi etc).

Ignition Controlled
Distributed On Demand™ battery bank management will only activatewith ignition power on.

Advance Regulator Ready
Advance regulator remote sense connection provided for precision alternatoralgorithm control for alternators equipped with an advanced regulator.

Easy Installation
Modular design for easy install. Includes all terminal stud insulator bootsand protective snap on safety cover.

Built-in Safety
Ignition protected and waterproof to IP66. FIVE YEAR

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

All Digital Electronic Charging
Industry recognized with the 2010 IBEX Innovation Award, ProNauticP employs our ProMar Digital Performance Charging Platform which combines all digital control and software-based power conversion technology with global energy management features. ProNauticP addresses the trend of incorporating and using more 12-volt electronics on-board today’s power, sail, cruising and sport fishing boats. Boasting twelve digitally-controlled performance charging profiles with finger tip selection, ProNauticP fully charges, conditions, maintains and re-conditions batteries while extending battery life and maximizing battery reserve power performance. ProNauticP is Power Factor Corrected with auto-ranging global AC input allowing all models to operate off a standard household power connection. Featuring dual digital displays for real-time display of actual charging voltage and amperage and AC power-on diagnostics with pass or fail status in addition to discreet fault indication for mis-wiring or adverse battery bank conditions. Designed to provide more time on the water enjoying what you like most... boating.

ProMar Digital Performance Charging

ProMar Digital Charging Performance - 12 Selectable Profiles
Up to 12 performance & precision 4-stage charging profiles: Charge, Condition, Maintain and Re-condition. Automatic dockside power mode for 12 Volt DC lighting and appliances. Factory set for Flooded (Lead Acid) batteries. AGM, GEL selectable.

Power Factor Correction - Global AC Input
Auto-ranging (100-250VAC/50-60Hz) global AC input with reduced harmonic distortion allowing all models to operate off a household power outlet connection. ProNauticP consumes less power so more AC power is available on board.

Distributed On Demand Technology
Automatically senses and distributes 100% of available charging amps to any one bank or combination of all banks.

Digital Self-Calculating Absorption and Battery Health Re-Conditioning Mode
Automatically programs conditioning time based on discharge state of batteries. Automatically de-sulfates batteries after 21 days in the maintain mode, improving reserve power performance & extending battery life.

Conservation Energy Saver Mode
After 72 hours of not seeing a load greater than 5 amps, float voltage will be lowered consuming less energy during storage periods. (for flooded & sealed charge profiles)

Service and Fault Mode LED Indicators
Real time indication of wiring faults or adverse conditions that may impact the operation of a boat’s charging system.

Automatic Fan Speed Control
Quiet operation. Innovative front exhaust prevents restriction of air flow and cooling.

Automatic Temperature Compensation and Built-in Safety
Remote temperature probe included - Ignition protected and current limiting. Designed and constructed to: Marine ULc 1236, CE, CTick and FCC Class B.

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

All Digital Electronic Charging
Industry recognized with the 2010 IBEX Innovation Award, ProNauticP employs our ProMar Digital Performance Charging Platform which combines all digital control and software-based power conversion technology with global energy management features. ProNauticP addresses the trend of incorporating and using more 12-volt electronics on-board today’s power, sail, cruising and sport fishing boats. Boasting twelve digitally-controlled performance charging profiles with finger tip selection, ProNauticP fully charges, conditions, maintains and re-conditions batteries while extending battery life and maximizing battery reserve power performance. ProNauticP is Power Factor Corrected with auto-ranging global AC input allowing all models to operate off a standard household power connection. Featuring dual digital displays for real-time display of actual charging voltage and amperage and AC power-on diagnostics with pass or fail status in addition to discreet fault indication for mis-wiring or adverse battery bank conditions. Designed to provide more time on the water enjoying what you like most... boating.

ProMar Digital Performance Charging

ProMar Digital Charging Performance - 12 Selectable Profiles
Up to 12 performance & precision 4-stage charging profiles: Charge, Condition, Maintain and Re-condition. Automatic dockside power mode for 12 Volt DC lighting and appliances. Factory set for Flooded (Lead Acid) batteries. AGM, GEL selectable.

Power Factor Correction - Global AC Input
Auto-ranging (100-250VAC/50-60Hz) global AC input with reduced harmonic distortion allowing all models to operate off a household power outlet connection. ProNauticP consumes less power so more AC power is available on board.

Distributed On Demand Technology
Automatically senses and distributes 100% of available charging amps to any one bank or combination of all banks.

Digital Self-Calculating Absorption and Battery Health Re-Conditioning Mode
Automatically programs conditioning time based on discharge state of batteries. Automatically de-sulfates batteries after 21 days in the maintain mode, improving reserve power performance & extending battery life.

Conservation Energy Saver Mode
After 72 hours of not seeing a load greater than 5 amps, float voltage will be lowered consuming less energy during storage periods. (for flooded & sealed charge profiles)

Service and Fault Mode LED Indicators
Real time indication of wiring faults or adverse conditions that may impact the operation of a boat’s charging system.

Automatic Fan Speed Control
Quiet operation. Innovative front exhaust prevents restriction of air flow and cooling.

Automatic Temperature Compensation and Built-in Safety
Remote temperature probe included - Ignition protected and current limiting. Designed and constructed to: Marine ULc 1236, CE, CTick and FCC Class B.

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

All Digital Electronic Charging
Industry recognized with the 2010 IBEX Innovation Award, ProNauticP employs our ProMar Digital Performance Charging Platform which combines all digital control and software-based power conversion technology with global energy management features. ProNauticP addresses the trend of incorporating and using more 12-volt electronics on-board today’s power, sail, cruising and sport fishing boats. Boasting twelve digitally-controlled performance charging profiles with finger tip selection, ProNauticP fully charges, conditions, maintains and re-conditions batteries while extending battery life and maximizing battery reserve power performance. ProNauticP is Power Factor Corrected with auto-ranging global AC input allowing all models to operate off a standard household power connection. Featuring dual digital displays for real-time display of actual charging voltage and amperage and AC power-on diagnostics with pass or fail status in addition to discreet fault indication for mis-wiring or adverse battery bank conditions. Designed to provide more time on the water enjoying what you like most... boating.

ProMar Digital Performance Charging

ProMar Digital Charging Performance - 12 Selectable Profiles
Up to 12 performance & precision 4-stage charging profiles: Charge, Condition, Maintain and Re-condition. Automatic dockside power mode for 12 Volt DC lighting and appliances. Factory set for Flooded (Lead Acid) batteries. AGM, GEL selectable.

Power Factor Correction - Global AC Input
Auto-ranging (100-250VAC/50-60Hz) global AC input with reduced harmonic distortion allowing all models to operate off a household power outlet connection. ProNauticP consumes less power so more AC power is available on board.

Distributed On Demand Technology
Automatically senses and distributes 100% of available charging amps to any one bank or combination of all banks.

Digital Self-Calculating Absorption and Battery Health Re-Conditioning Mode
Automatically programs conditioning time based on discharge state of batteries. Automatically de-sulfates batteries after 21 days in the maintain mode, improving reserve power performance & extending battery life.

Conservation Energy Saver Mode
After 72 hours of not seeing a load greater than 5 amps, float voltage will be lowered consuming less energy during storage periods. (for flooded & sealed charge profiles)

Service and Fault Mode LED Indicators
Real time indication of wiring faults or adverse conditions that may impact the operation of a boat’s charging system.

Automatic Fan Speed Control
Quiet operation. Innovative front exhaust prevents restriction of air flow and cooling.

Automatic Temperature Compensation and Built-in Safety
Remote temperature probe included - Ignition protected and current limiting. Designed and constructed to: Marine ULc 1236, CE, CTick and FCC Class B.

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

All Digital Electronic Charging
Industry recognized with the 2010 IBEX Innovation Award, ProNauticP employs our ProMar Digital Performance Charging Platform which combines all digital control and software-based power conversion technology with global energy management features. ProNauticP addresses the trend of incorporating and using more 12-volt electronics on-board today’s power, sail, cruising and sport fishing boats. Boasting twelve digitally-controlled performance charging profiles with finger tip selection, ProNauticP fully charges, conditions, maintains and re-conditions batteries while extending battery life and maximizing battery reserve power performance. ProNauticP is Power Factor Corrected with auto-ranging global AC input allowing all models to operate off a standard household power connection. Featuring dual digital displays for real-time display of actual charging voltage and amperage and AC power-on diagnostics with pass or fail status in addition to discreet fault indication for mis-wiring or adverse battery bank conditions. Designed to provide more time on the water enjoying what you like most... boating.

ProMar Digital Performance Charging

ProMar Digital Charging Performance - 12 Selectable Profiles
Up to 12 performance & precision 4-stage charging profiles: Charge, Condition, Maintain and Re-condition. Automatic dockside power mode for 12 Volt DC lighting and appliances. Factory set for Flooded (Lead Acid) batteries. AGM, GEL selectable.

Power Factor Correction - Global AC Input
Auto-ranging (100-250VAC/50-60Hz) global AC input with reduced harmonic distortion allowing all models to operate off a household power outlet connection. ProNauticP consumes less power so more AC power is available on board.

Distributed On Demand Technology
Automatically senses and distributes 100% of available charging amps to any one bank or combination of all banks.

Digital Self-Calculating Absorption and Battery Health Re-Conditioning Mode
Automatically programs conditioning time based on discharge state of batteries. Automatically de-sulfates batteries after 21 days in the maintain mode, improving reserve power performance & extending battery life.

Conservation Energy Saver Mode
After 72 hours of not seeing a load greater than 5 amps, float voltage will be lowered consuming less energy during storage periods. (for flooded & sealed charge profiles)

Service and Fault Mode LED Indicators
Real time indication of wiring faults or adverse conditions that may impact the operation of a boat’s charging system.

Automatic Fan Speed Control
Quiet operation. Innovative front exhaust prevents restriction of air flow and cooling.

Automatic Temperature Compensation and Built-in Safety
Remote temperature probe included - Ignition protected and current limiting. Designed and constructed to: Marine ULc 1236, CE, CTick and FCC Class B.

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

All Digital Electronic Charging
Industry recognized with the 2010 IBEX Innovation Award, ProNauticP employs our ProMar Digital Performance Charging Platform which combines all digital control and software-based power conversion technology with global energy management features. ProNauticP addresses the trend of incorporating and using more 12-volt electronics on-board today’s power, sail, cruising and sport fishing boats. Boasting twelve digitally-controlled performance charging profiles with finger tip selection, ProNauticP fully charges, conditions, maintains and re-conditions batteries while extending battery life and maximizing battery reserve power performance. ProNauticP is Power Factor Corrected with auto-ranging global AC input allowing all models to operate off a standard household power connection. Featuring dual digital displays for real-time display of actual charging voltage and amperage and AC power-on diagnostics with pass or fail status in addition to discreet fault indication for mis-wiring or adverse battery bank conditions. Designed to provide more time on the water enjoying what you like most... boating.

ProMar Digital Performance Charging

ProMar Digital Charging Performance - 12 Selectable Profiles
Up to 12 performance & precision 4-stage charging profiles: Charge, Condition, Maintain and Re-condition. Automatic dockside power mode for 12 Volt DC lighting and appliances. Factory set for Flooded (Lead Acid) batteries. AGM, GEL selectable.

Power Factor Correction - Global AC Input
Auto-ranging (100-250VAC/50-60Hz) global AC input with reduced harmonic distortion allowing all models to operate off a household power outlet connection. ProNauticP consumes less power so more AC power is available on board.

Distributed On Demand Technology
Automatically senses and distributes 100% of available charging amps to any one bank or combination of all banks.

Digital Self-Calculating Absorption and Battery Health Re-Conditioning Mode
Automatically programs conditioning time based on discharge state of batteries. Automatically de-sulfates batteries after 21 days in the maintain mode, improving reserve power performance & extending battery life.

Conservation Energy Saver Mode
After 72 hours of not seeing a load greater than 5 amps, float voltage will be lowered consuming less energy during storage periods. (for flooded & sealed charge profiles)

Service and Fault Mode LED Indicators
Real time indication of wiring faults or adverse conditions that may impact the operation of a boat’s charging system.

Automatic Fan Speed Control
Quiet operation. Innovative front exhaust prevents restriction of air flow and cooling.

Automatic Temperature Compensation and Built-in Safety
Remote temperature probe included - Ignition protected and current limiting. Designed and constructed to: Marine ULc 1236, CE, CTick and FCC Class B.

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

All Digital Electronic Charging
Industry recognized with the 2010 IBEX Innovation Award, ProNauticP employs our ProMar Digital Performance Charging Platform which combines all digital control and software-based power conversion technology with global energy management features. ProNauticP addresses the trend of incorporating and using more 12-volt electronics on-board today’s power, sail, cruising and sport fishing boats. Boasting twelve digitally-controlled performance charging profiles with finger tip selection, ProNauticP fully charges, conditions, maintains and re-conditions batteries while extending battery life and maximizing battery reserve power performance. ProNauticP is Power Factor Corrected with auto-ranging global AC input allowing all models to operate off a standard household power connection. Featuring dual digital displays for real-time display of actual charging voltage and amperage and AC power-on diagnostics with pass or fail status in addition to discreet fault indication for mis-wiring or adverse battery bank conditions. Designed to provide more time on the water enjoying what you like most... boating.

ProMar Digital Performance Charging

ProMar Digital Charging Performance - 12 Selectable Profiles
Up to 12 performance & precision 4-stage charging profiles: Charge, Condition, Maintain and Re-condition. Automatic dockside power mode for 12 Volt DC lighting and appliances. Factory set for Flooded (Lead Acid) batteries. AGM, GEL selectable.

Power Factor Correction - Global AC Input
Auto-ranging (100-250VAC/50-60Hz) global AC input with reduced harmonic distortion allowing all models to operate off a household power outlet connection. ProNauticP consumes less power so more AC power is available on board.

Distributed On Demand Technology
Automatically senses and distributes 100% of available charging amps to any one bank or combination of all banks.

Digital Self-Calculating Absorption and Battery Health Re-Conditioning Mode
Automatically programs conditioning time based on discharge state of batteries. Automatically de-sulfates batteries after 21 days in the maintain mode, improving reserve power performance & extending battery life.

Conservation Energy Saver Mode
After 72 hours of not seeing a load greater than 5 amps, float voltage will be lowered consuming less energy during storage periods. (for flooded & sealed charge profiles)

Service and Fault Mode LED Indicators
Real time indication of wiring faults or adverse conditions that may impact the operation of a boat’s charging system.

Automatic Fan Speed Control
Quiet operation. Innovative front exhaust prevents restriction of air flow and cooling.

Automatic Temperature Compensation and Built-in Safety
Remote temperature probe included - Ignition protected and current limiting. Designed and constructed to: Marine ULc 1236, CE, CTick and FCC Class B.

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Package Contents:

All Digital Electronic Charging

Industry recognized with the 2010 IBEX Innovation Award, ProNauticP employs our ProMar Digital Performance Charging Platform which combines all digital control and software-based power conversion technology with global energy management features. ProNauticP addresses the trend of incorporating and using more 12-volt electronics on-board today’s power, sail, cruising and sport fishing boats. Boasting twelve digitally-controlled performance charging profiles with finger tip selection, ProNauticP fully charges, conditions, maintains and re-conditions batteries while extending battery life and maximizing battery reserve power performance. ProNauticP is Power Factor Corrected with auto-ranging global AC input allowing all models to operate off a standard household power connection. Featuring dual digital displays for real-time display of actual charging voltage and amperage and AC power-on diagnostics with pass or fail status in addition to discreet fault indication for mis-wiring or adverse battery bank conditions. Designed to provide more time on the water enjoying what you like most... boating.

ProMar Digital Performance Charging

ProMar Digital Charging Performance - 12 Selectable Profiles

Up to 12 performance & precision 4-stage charging profiles: Charge, Condition, Maintain and Re-condition. Automatic dockside power mode for 12 Volt DC lighting and appliances. Factory set for Flooded (Lead Acid) batteries. AGM, GEL selectable.

Power Factor Correction - Global AC Input

Auto-ranging (100-250VAC/50-60Hz) global AC input with reduced harmonic distortion allowing all models to operate off a household power outlet connection. ProNauticP consumes less power so more AC power is available on board.

Distributed On Demand Technology

Automatically senses and distributes 100% of available charging amps to any one bank or combination of all banks.

Digital Self-Calculating Absorption and Battery Health Re-Conditioning Mode

Automatically programs conditioning time based on discharge state of batteries. Automatically de-sulfates batteries after 21 days in the maintain mode, improving reserve power performance & extending battery life.

Conservation Energy Saver Mode

After 72 hours of not seeing a load greater than 5 amps, float voltage will be lowered consuming less energy during storage periods. (for flooded & sealed charge profiles)

Service and Fault Mode LED Indicators

Real time indication of wiring faults or adverse conditions that may impact the operation of a boat’s charging system.

Automatic Fan Speed Control

Quiet operation. Innovative front exhaust prevents restriction of air flow and cooling.

Automatic Temperature Compensation and Built-in Safety

Remote temperature probe included - Ignition protected and current limiting. Designed and constructed to: Marine ULc 1236, CE, CTick and FCC Class B.

Package Contents:

ProNautic Charger

Parts package including:.

a. Owners/Installation Manual

b. Warranty Card

c. Temperature Probe

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

All Digital Electronic Charging
Industry recognized with the 2010 IBEX Innovation Award, ProNauticP employs our ProMar Digital Performance Charging Platform which combines all digital control and software-based power conversion technology with global energy management features. ProNauticP addresses the trend of incorporating and using more 12-volt electronics on-board today’s power, sail, cruising and sport fishing boats. Boasting twelve digitally-controlled performance charging profiles with finger tip selection, ProNauticP fully charges, conditions, maintains and re-conditions batteries while extending battery life and maximizing battery reserve power performance. ProNauticP is Power Factor Corrected with auto-ranging global AC input allowing all models to operate off a standard household power connection. Featuring dual digital displays for real-time display of actual charging voltage and amperage and AC power-on diagnostics with pass or fail status in addition to discreet fault indication for mis-wiring or adverse battery bank conditions. Designed to provide more time on the water enjoying what you like most... boating.

ProMar Digital Performance Charging

ProMar Digital Charging Performance - 12 Selectable Profiles
Up to 12 performance & precision 4-stage charging profiles: Charge, Condition, Maintain and Re-condition. Automatic dockside power mode for 12 Volt DC lighting and appliances. Factory set for Flooded (Lead Acid) batteries. AGM, GEL selectable.

Power Factor Correction - Global AC Input
Auto-ranging (100-250VAC/50-60Hz) global AC input with reduced harmonic distortion allowing all models to operate off a household power outlet connection. ProNauticP consumes less power so more AC power is available on board.

Distributed On Demand Technology
Automatically senses and distributes 100% of available charging amps to any one bank or combination of all banks.

Digital Self-Calculating Absorption and Battery Health Re-Conditioning Mode
Automatically programs conditioning time based on discharge state of batteries. Automatically de-sulfates batteries after 21 days in the maintain mode, improving reserve power performance & extending battery life.

Conservation Energy Saver Mode
After 72 hours of not seeing a load greater than 5 amps, float voltage will be lowered consuming less energy during storage periods. (for flooded & sealed charge profiles)

Service and Fault Mode LED Indicators
Real time indication of wiring faults or adverse conditions that may impact the operation of a boat’s charging system.

Automatic Fan Speed Control
Quiet operation. Innovative front exhaust prevents restriction of air flow and cooling.

Automatic Temperature Compensation and Built-in Safety
Remote temperature probe included - Ignition protected and current limiting. Designed and constructed to: Marine ULc 1236, CE, CTick and FCC Class B.

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

All Digital Electronic Charging
Industry recognized with the 2010 IBEX Innovation Award, ProNauticP employs our ProMar Digital Performance Charging Platform which combines all digital control and software-based power conversion technology with global energy management features. ProNauticP addresses the trend of incorporating and using more 12-volt electronics on-board today’s power, sail, cruising and sport fishing boats. Boasting twelve digitally-controlled performance charging profiles with finger tip selection, ProNauticP fully charges, conditions, maintains and re-conditions batteries while extending battery life and maximizing battery reserve power performance. ProNauticP is Power Factor Corrected with auto-ranging global AC input allowing all models to operate off a standard household power connection. Featuring dual digital displays for real-time display of actual charging voltage and amperage and AC power-on diagnostics with pass or fail status in addition to discreet fault indication for mis-wiring or adverse battery bank conditions. Designed to provide more time on the water enjoying what you like most... boating.

ProMar Digital Performance Charging

ProMar Digital Charging Performance - 12 Selectable Profiles
Up to 12 performance & precision 4-stage charging profiles: Charge, Condition, Maintain and Re-condition. Automatic dockside power mode for 12 Volt DC lighting and appliances. Factory set for Flooded (Lead Acid) batteries. AGM, GEL selectable.

Power Factor Correction - Global AC Input
Auto-ranging (100-250VAC/50-60Hz) global AC input with reduced harmonic distortion allowing all models to operate off a household power outlet connection. ProNauticP consumes less power so more AC power is available on board.

Distributed On Demand Technology
Automatically senses and distributes 100% of available charging amps to any one bank or combination of all banks.

Digital Self-Calculating Absorption and Battery Health Re-Conditioning Mode
Automatically programs conditioning time based on discharge state of batteries. Automatically de-sulfates batteries after 21 days in the maintain mode, improving reserve power performance & extending battery life.

Conservation Energy Saver Mode
After 72 hours of not seeing a load greater than 5 amps, float voltage will be lowered consuming less energy during storage periods. (for flooded & sealed charge profiles)

Service and Fault Mode LED Indicators
Real time indication of wiring faults or adverse conditions that may impact the operation of a boat’s charging system.

Automatic Fan Speed Control
Quiet operation. Innovative front exhaust prevents restriction of air flow and cooling.

Automatic Temperature Compensation and Built-in Safety
Remote temperature probe included - Ignition protected and current limiting. Designed and constructed to: Marine ULc 1236, CE, CTick and FCC Class B.

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ProSafe FAILSAFE 60amp Galvanic Isolator

ProSafe FS installs easily and does not require a dedicated monitor to verify the operational status of the galvanic isolator as required by non FailSafe Certified galvanic isolators.

ProSafe FS 60 is built on robust FlatPack semiconductor platforms ensuring that in the event of a failure, the failure is safe by not compromising the ground continuity on-board when connected to AC Shore Power.

• ABYC A-28 July ’08 Compliant and Fail Safe CertifiedCertified by Underwriters Laboratories (UL). Insures shore power safety ground wire is maintained through the isolator.
  
• Flat Pack High Power SemiconductorsRobust high power diodes allow the FS Series to meet the new FailSafe criteria for conducting inrush currents of 3,000 amps for the required duration period.
  
• Ignition ProtectedMeets ISO 8846 and can be mounted within an engine compartment.
  
• Gold Plated Terminations

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ProSafe FAILSAFE 30amp Galvanic Isolator

ProSafe FS installs easily and does not require a dedicated monitor to verify the operational status of the galvanic isolator as required by non FailSafe Certified galvanic isolators.

• ProSafe FS 30 is built on robust FlatPack semiconductor platforms ensuring that in the event of a failure, the failure is safe by not compromising the ground continuity on-board when connected to AC Shore Power.
  
• ABYC A-28 July ’08 Compliant and Fail Safe Certified
  Certified by Underwriters Laboratories (UL). Insures shore power safety ground wire is maintained through the isolator.
  
• Flat Pack High Power Semiconductors
  Robust high power diodes allow the FS Series to meet the new FailSafe criteria for conducting inrush currents of 3,000 amps for the required duration period.
  
• Ignition Protected
  Meets ISO 8846 and can be mounted within an engine compartment.
  
• Gold Plated Terminations

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Remote "Push-to-Test" status of up to 3-12V battery banks
  
• Easy to read LED indicators
  
• Pre-wired for easy installation
  
• Universal flush or surface mount display
  
• Includes 10" cable harness

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ProMariner ProTourn Elite Remote

• Tournament Winning Technology. The fastest battery charger with the most features in its class. Specifically designed to deliver maximum charging performance and extend battery life. Get on the water first and stay there longer with tournament winning technology providing: 100 percent charge upon completion of multi-stage charging process. 100 percent charging output with AC power as low as 90 VAC. 50 percent lighter and 2 to 3 times faster than traditional chargers. Give your batteries what they demand with ProTournament Elite’s three (3) digitally selectable performance matched 5-stage charge profiles. Using 100 percent of the available charging amps, ProTournament Elite’s Distributed-On-Demand Charging technology will always distribute its full charging output to the combination of batteries connected to it as required by the discharge state of each battery.
• Tournament Winning Technology: 100 percent charge upon completion of multi-stage charging process. 100 percent charging output with AC power as low as 90 VAC. 50 percent lighter and 2 to 3 times faster than traditional chargers.
• Forced Induction Cooling (360 Elite models only): Concealed waterproof fan provides forced air cooling for cooler operation and fastest charge times
• Digital LED Display with Dual Mode Battery Status Monitor: Intuitive LED display with charge mode indicators and real time charge level status with an on-the-water push-to-test feature for percent of battery power remaining
• 3 Selectable Performance Matched Charge Profiles: Profiles include: Standard Flooded/AGM batteries, HP AGM1 for pure lead AGM batteries like OPTIMA Blue Top Marine Batteries, HP AGM 2 for pure lead AGM Batteries like Odyssey Marine Batteries
• Waterproof Connector Port for Optional Status Remote: Optional tri-color LED charge mode status remote can be placed up to 12 feet away from the charger
• Digital 5-Stage Charging with Temperature Compensation: Analyzes connections and the ability for a battery to accept a charge, advance high fill rate charging, conditioning, auto maintain (energy saving mode) and automatic once a month storage recondition mode automatically monitors ambient temperatures and adjusts its charging output
• System OK and Individual Battery Trouble Status Indicators: Advanced technology eliminates time consuming trouble shooting by clearly indicating system and battery connections are OK or if a fault is present on a specific battery bank
• Built-in Safety and Pre-Wired for Easy Installation: Shock resistant, space saving extruded aluminum design, dual in-line DC safety fuses for trolling motor and house batteries, over-voltage, overload, over-temperature, reverse polarity and ignition protection
• Distributed-On-Demand Technology

Tournament Winning Technology. The fastest battery charger with the most features in its class. Specifically designed to deliver maximum charging performance and extend battery life. Get on the water first and stay there longer with tournament winning technology providing: 100 percent charge upon completion of multi-stage charging process. 100 percent charging output with AC power as low as 90 VAC. 50 percent lighter and 2 to 3 times faster than traditional chargers. Give your batteries what they demand with ProTournament Elite’s three (3) digitally selectable performance matched 5-stage charge profiles. Using 100 percent of the available charging amps, ProTournament Elite’s Distributed-On-Demand Charging technology will always distribute its full charging output to the combination of batteries connected to it as required by the discharge state of each battery.

ProMariner ProTournament Elite 3 Series 240

• IP 67 Sealed Waterproof Design
• Line of Sight, Charge Status AC Glow Plug
• 4 Digitally Selectable Charge Profiles
• Dual Mode Battery Status Monitor
• Distributed-On-Demand TechnologyTM

The new ProTournament Elite 3 provides a competitive edge getting you on the water first with power to last. Using advanced thermal modeling, its tri-surface aluminum heat sink delivers true-rated constant current charging amperage for the fastest charge times.

ProTournament Elite 3 boasts an industry first LED Charge Status AC Glow Plug, that when connected to an extension cord outside of your boat, illuminates 3 individual colors for charging, conditioning or auto maintaining your fully charged batteries. High Power ProTournamentelite 360 and 500 models feature an industry leading selectable Turbo Charge Mode with Forced Induction Power Flow Cooling for time critical charging.

Full output 5-stage digital performance charging to charge, condition, auto maintain and storage recondition your batteries once a month, maximizing battery life and performance. 100% charging performance with AC voltage as low as 90 VAC. System Check OK and Check Battery indicators, Charge Mode LEDs and a dual mode battery status monitor displaying charge progress or on the water power remaining. User selectable charging profiles for Flooded, AGM and ProMariner approved LiFePO4 chemistries.

Designed to last in harsh environments and certified to UL Marine 1236 while meeting new energy efficient CEC and DOE requirements. Built-in safety features including dual inline waterproof fuses, reverse polarity, over-temperature, over-current, over-voltage and ignition protection.

ProMariner ProTournament Elite 3 Series 240 3 Bank

• IP 67 Sealed Waterproof Design
• Line of Sight, Charge Status AC Glow Plug
• 4 Digitally Selectable Charge Profiles
• Dual Mode Battery Status Monitor
• Distributed-On-Demand TechnologyTM

The new ProTournament Elite 3 provides a competitive edge getting you on the water first with power to last. Using advanced thermal modeling, its tri-surface aluminum heat sink delivers true-rated constant current charging amperage for the fastest charge times.

ProTournament Elite 3 boasts an industry first LED Charge Status AC Glow Plug, that when connected to an extension cord outside of your boat, illuminates 3 individual colors for charging, conditioning or auto maintaining your fully charged batteries. High Power ProTournamentelite 360 and 500 models feature an industry leading selectable Turbo Charge Mode with Forced Induction Power Flow Cooling for time critical charging.

Full output 5-stage digital performance charging to charge, condition, auto maintain and storage recondition your batteries once a month, maximizing battery life and performance. 100% charging performance with AC voltage as low as 90 VAC. System Check OK and Check Battery indicators, Charge Mode LEDs and a dual mode battery status monitor displaying charge progress or on the water power remaining. User selectable charging profiles for Flooded, AGM and ProMariner approved LiFePO4 chemistries.

Designed to last in harsh environments and certified to UL Marine 1236 while meeting new energy efficient CEC and DOE requirements. Built-in safety features including dual inline waterproof fuses, reverse polarity, over-temperature, over-current, over-voltage and ignition protection.

ProMariner ProTournament Elite 3 Series 240 4 Bank

• IP 67 Sealed Waterproof Design
• Line of Sight, Charge Status AC Glow Plug
• 4 Digitally Selectable Charge Profiles
• Dual Mode Battery Status Monitor
• Distributed-On-Demand TechnologyTM

The new ProTournament Elite 3 provides a competitive edge getting you on the water first with power to last. Using advanced thermal modeling, its tri-surface aluminum heat sink delivers true-rated constant current charging amperage for the fastest charge times.

ProTournament Elite 3 boasts an industry first LED Charge Status AC Glow Plug, that when connected to an extension cord outside of your boat, illuminates 3 individual colors for charging, conditioning or auto maintaining your fully charged batteries. High Power ProTournamentelite 360 and 500 models feature an industry leading selectable Turbo Charge Mode with Forced Induction Power Flow Cooling for time critical charging.

Full output 5-stage digital performance charging to charge, condition, auto maintain and storage recondition your batteries once a month, maximizing battery life and performance. 100% charging performance with AC voltage as low as 90 VAC. System Check OK and Check Battery indicators, Charge Mode LEDs and a dual mode battery status monitor displaying charge progress or on the water power remaining. User selectable charging profiles for Flooded, AGM and ProMariner approved LiFePO4 chemistries.

Designed to last in harsh environments and certified to UL Marine 1236 while meeting new energy efficient CEC and DOE requirements. Built-in safety features including dual inline waterproof fuses, reverse polarity, over-temperature, over-current, over-voltage and ignition protection.

ProMariner ProTournament Elite 3 Series 360 3 Bank

• IP 67 Sealed Waterproof Design
• Line of Sight, Charge Status AC Glow Plug
• 4 Digitally Selectable Charge Profiles
• Dual Mode Battery Status Monitor
• Distributed-On-Demand TechnologyTM

The new ProTournament Elite 3 provides a competitive edge getting you on the water first with power to last. Using advanced thermal modeling, its tri-surface aluminum heat sink delivers true-rated constant current charging amperage for the fastest charge times.

ProTournament Elite 3 boasts an industry first LED Charge Status AC Glow Plug, that when connected to an extension cord outside of your boat, illuminates 3 individual colors for charging, conditioning or auto maintaining your fully charged batteries. High Power ProTournamentelite 360 and 500 models feature an industry leading selectable Turbo Charge Mode with Forced Induction Power Flow Cooling for time critical charging.

Full output 5-stage digital performance charging to charge, condition, auto maintain and storage recondition your batteries once a month, maximizing battery life and performance. 100% charging performance with AC voltage as low as 90 VAC. System Check OK and Check Battery indicators, Charge Mode LEDs and a dual mode battery status monitor displaying charge progress or on the water power remaining. User selectable charging profiles for Flooded, AGM and ProMariner approved LiFePO4 chemistries.

Designed to last in harsh environments and certified to UL Marine 1236 while meeting new energy efficient CEC and DOE requirements. Built-in safety features including dual inline waterproof fuses, reverse polarity, over-temperature, over-current, over-voltage and ignition protection.

ProMariner ProTournament Elite 3 Series 360 4 Bank

• IP 67 Sealed Waterproof Design
• Line of Sight, Charge Status AC Glow Plug
• 4 Digitally Selectable Charge Profiles
• Dual Mode Battery Status Monitor
• Distributed-On-Demand TechnologyTM

The new ProTournament Elite 3 provides a competitive edge getting you on the water first with power to last. Using advanced thermal modeling, its tri-surface aluminum heat sink delivers true-rated constant current charging amperage for the fastest charge times.

ProTournament Elite 3 boasts an industry first LED Charge Status AC Glow Plug, that when connected to an extension cord outside of your boat, illuminates 3 individual colors for charging, conditioning or auto maintaining your fully charged batteries. High Power ProTournamentelite 360 and 500 models feature an industry leading selectable Turbo Charge Mode with Forced Induction Power Flow Cooling for time critical charging.

Full output 5-stage digital performance charging to charge, condition, auto maintain and storage recondition your batteries once a month, maximizing battery life and performance. 100% charging performance with AC voltage as low as 90 VAC. System Check OK and Check Battery indicators, Charge Mode LEDs and a dual mode battery status monitor displaying charge progress or on the water power remaining. User selectable charging profiles for Flooded, AGM and ProMariner approved LiFePO4 chemistries.

Designed to last in harsh environments and certified to UL Marine 1236 while meeting new energy efficient CEC and DOE requirements. Built-in safety features including dual inline waterproof fuses, reverse polarity, over-temperature, over-current, over-voltage and ignition protection.

ProMariner ProTournament Elite 3 Series 500 5 Bank

• IP 67 Sealed Waterproof Design
• Line of Sight, Charge Status AC Glow Plug
• 4 Digitally Selectable Charge Profiles
• Dual Mode Battery Status Monitor
• Distributed-On-Demand TechnologyTM

The new ProTournament Elite 3 provides a competitive edge getting you on the water first with power to last. Using advanced thermal modeling, its tri-surface aluminum heat sink delivers true-rated constant current charging amperage for the fastest charge times.

ProTournament Elite 3 boasts an industry first LED Charge Status AC Glow Plug, that when connected to an extension cord outside of your boat, illuminates 3 individual colors for charging, conditioning or auto maintaining your fully charged batteries. High Power ProTournamentelite 360 and 500 models feature an industry leading selectable Turbo Charge Mode with Forced Induction Power Flow Cooling for time critical charging.

Full output 5-stage digital performance charging to charge, condition, auto maintain and storage recondition your batteries once a month, maximizing battery life and performance. 100% charging performance with AC voltage as low as 90 VAC. System Check OK and Check Battery indicators, Charge Mode LEDs and a dual mode battery status monitor displaying charge progress or on the water power remaining. User selectable charging profiles for Flooded, AGM and ProMariner approved LiFePO4 chemistries.

Designed to last in harsh environments and certified to UL Marine 1236 while meeting new energy efficient CEC and DOE requirements. Built-in safety features including dual inline waterproof fuses, reverse polarity, over-temperature, over-current, over-voltage and ignition protection.

ProMariner ProTournament Elite Remote

• Provides quick and easy indication of charge status with the LED halo
• Red for charging, Yellow for conditioning and Green for maintenance
• Easy plug in water tight connection with 12 feet of cable

ProMariner ProNautic 1210P 2 Bank 10 Amp 12vDC Battery Charger 100-240VAC input

• ProMar Digital Charging Performance - 12 Selectable Profiles
• Power Factor Correction - Global AC Input
• Distributed On Demand Technology
• Digital Self-Calculating Absorption and Battery Health Re-Conditioning Mode
• Conservation Energy Saver Mode
• Service and Fault Mode LED Indicators
• Automatic Fan Speed Control
• Automatic Temperature Compensation and Built-in Safety

Industry recognized with the 2010 IBEX Innovation Award, ProNauticP employs our Generation 3 ProMar Digital Performance Charging Platform which combines all digital control and softwarebased power conversion technology with global energy management features. ProNauticP addresses the trend of incorporating and using more 12-volt electronics onboard today’s power, sail, cruising and sport fishing boats. Boasting twelve digitally-controlled performance charging profiles with finger tip selection, ProNauticP fully charges, conditions, maintains and re-conditions batteries while extending battery life and maximizing battery reserve power performance. Designed to provide more time on the water enjoying what you like most?boating.

ProMariner ProNautic 1215P 3 Bank 15 Amp 12vDC Battery Charger 100-240VAC input

• ProMar Digital Charging Performance - 12 Selectable Profiles
• Power Factor Correction - Global AC Input
• Distributed On Demand Technology
• Digital Self-Calculating Absorption and Battery Health Re-Conditioning Mode
• Conservation Energy Saver Mode
• Service and Fault Mode LED Indicators
• Automatic Fan Speed Control
• Automatic Temperature Compensation and Built-in Safety

Industry recognized with the 2010 IBEX Innovation Award, ProNauticP employs our Generation 3 ProMar Digital Performance Charging Platform which combines all digital control and softwarebased power conversion technology with global energy management features. ProNauticP addresses the trend of incorporating and using more 12-volt electronics onboard today’s power, sail, cruising and sport fishing boats. Boasting twelve digitally-controlled performance charging profiles with finger tip selection, ProNauticP fully charges, conditions, maintains and re-conditions batteries while extending battery life and maximizing battery reserve power performance. Designed to provide more time on the water enjoying what you like most?boating.

ProMariner ProNautic 1220P 3 Bank 20 Amp 12vDC Battery Charger 100-240VAC input

• ProMar Digital Charging Performance - 12 Selectable Profiles
• Power Factor Correction - Global AC Input
• Distributed On Demand Technology
• Digital Self-Calculating Absorption and Battery Health Re-Conditioning Mode
• Conservation Energy Saver Mode
• Service and Fault Mode LED Indicators
• Automatic Fan Speed Control
• Automatic Temperature Compensation and Built-in Safety

Industry recognized with the 2010 IBEX Innovation Award, ProNauticP employs our Generation 3 ProMar Digital Performance Charging Platform which combines all digital control and softwarebased power conversion technology with global energy management features. ProNauticP addresses the trend of incorporating and using more 12-volt electronics onboard today’s power, sail, cruising and sport fishing boats. Boasting twelve digitally-controlled performance charging profiles with finger tip selection, ProNauticP fully charges, conditions, maintains and re-conditions batteries while extending battery life and maximizing battery reserve power performance. Designed to provide more time on the water enjoying what you like most?boating.

ProMariner ProNautic 1230P 3 Bank 30 Amp 12vDC Battery Charger 100-240VAC input

• ProMar Digital Charging Performance - 12 Selectable Profiles
• Power Factor Correction - Global AC Input
• Distributed On Demand Technology
• Digital Self-Calculating Absorption and Battery Health Re-Conditioning Mode
• Conservation Energy Saver Mode
• Service and Fault Mode LED Indicators
• Automatic Fan Speed Control
• Automatic Temperature Compensation and Built-in Safety

Industry recognized with the 2010 IBEX Innovation Award, ProNauticP employs our Generation 3 ProMar Digital Performance Charging Platform which combines all digital control and softwarebased power conversion technology with global energy management features. ProNauticP addresses the trend of incorporating and using more 12-volt electronics onboard today’s power, sail, cruising and sport fishing boats. Boasting twelve digitally-controlled performance charging profiles with finger tip selection, ProNauticP fully charges, conditions, maintains and re-conditions batteries while extending battery life and maximizing battery reserve power performance. Designed to provide more time on the water enjoying what you like most?boating.

ProMariner ProSafe 2 30 Amp Failsale Galvanic Isolator

• ABYC A-28 July 2008 Compliant and Fail Safe Certified: Certified by Underwriters Laboratories (UL). Insures shore power safety ground wire is maintained through the isolator.
• Flat Pack High Power Semiconductors: Robust high power diodes allow the FS Series to meet the new FailSafe criteria for conducting inrush currents 3,000 and 5,000 amps (FS30 and FS60 respectively) for the required duration period.
• Use the ProSafe FS30 for 30 Amp Shore Cord Applications
• Ignition Protected: Meets ISO 8846 and either model can be mounted within an engine compartment
• Gold Plated Terminations: Simply install in your on board green safety ground wire (between your AC inlet and your AC Panel) to separate your DC Bonding System from your Shore AC Green wire

FailSafe Technology with Peace of Mind Dependability. The ProSafe FailSafe 30 Amp Galvanic Isolator will interrupt galvanic current flow with other boats at a marina when installed on a boat which is connected to AC Shore Power. This technology maintains AC safety ground and solves the most common forms of corrosion and premature zinc loss within a boats bonding system. The ProSafe FS Series is UL Certified to meet the parameters of the ABYC A-28 recommendation ProSafe FS installs easily and does not require a dedicated monitor to verify the operational status of the galvanic isolator as required by non FailSafe Certified galvanic isolators. The ProSafe Failsafe 30 is built on robust Flat Pack Semiconductor platforms, ensuring that in the event of a failure, the failure is safe by not compromising the ground continuity on-board when connected to AC Shore Power.

ProMariner ProSafe 2 60 Amp Failsale Galvanic Isolator

• ABYC A-28 July 2008 Compliant and Fail Safe Certified: Certified by Underwriters Laboratories (UL). Insures shore power safety ground wire is maintained through the isolator.
• Flat Pack High Power Semiconductors: Robust high power diodes allow the FS Series to meet the new FailSafe criteria for conducting inrush currents 3,000 and 5,000 amps (FS30 and FS60 respectively) for the required duration period.
• Innovative Design: The FS60 will cool itself in the event it must conduct current insuring cooler operation in this mode
• Ignition Protected: Meets ISO 8846 and either model can be mounted within an engine compartment
• Gold Plated Terminations: Simply install in your on board green safety ground wire (between your AC inlet and your AC Panel) to separate your DC Bonding System from your Shore AC Green wire
• Use the ProSafe FS60 for (1) 50 Amp or (2) 30 Amp Shore Cord Applications

FailSafe Technology with Peace of Mind Dependability. The ProSafe FailSafe 60 Amp Galvanic Isolator will interrupt galvanic current flow with other boats at a marina when installed on a boat which is connected to AC Shore Power. This technology maintains AC safety ground and solves the most common forms of corrosion and premature zinc loss within a boats bonding system. The ProSafe FS Series is UL Certified to meet the parameters of the ABYC A-28 recommendation ProSafe FS installs easily and does not require a dedicated monitor to verify the operational status of the galvanic isolator as required by non FailSafe Certified galvanic isolators. The ProSafe Failsafe 60 is built on robust Flat Pack Semiconductor platforms, ensuring that in the event of a failure, the failure is safe by not compromising the ground continuity on-board when connected to AC Shore Power.

ProMariner ProNautic 1240P 3 Bank 40 Amp 12vDC Battery Charger 100-240VAC input

• ProMar Digital Charging Performance - 12 Selectable Profiles
• Power Factor Correction - Global AC Input
• Distributed On Demand Technology
• Digital Self-Calculating Absorption and Battery Health Re-Conditioning Mode
• Conservation Energy Saver Mode
• Service and Fault Mode LED Indicators
• Automatic Fan Speed Control
• Automatic Temperature Compensation and Built-in Safety

Industry recognized with the 2010 IBEX Innovation Award, ProNauticP employs our Generation 3 ProMar Digital Performance Charging Platform which combines all digital control and softwarebased power conversion technology with global energy management features. ProNauticP addresses the trend of incorporating and using more 12-volt electronics onboard today’s power, sail, cruising and sport fishing boats. Boasting twelve digitally-controlled performance charging profiles with finger tip selection, ProNauticP fully charges, conditions, maintains and re-conditions batteries while extending battery life and maximizing battery reserve power performance. Designed to provide more time on the water enjoying what you like most?boating.

ProMariner ProNautic 1250P 3 Bank 50 Amp 12vDC Battery Charger 100-240VAC input

• ProMar Digital Charging Performance - 12 Selectable Profiles
• Power Factor Correction - Global AC Input
• Distributed On Demand Technology
• Digital Self-Calculating Absorption and Battery Health Re-Conditioning Mode
• Conservation Energy Saver Mode
• Service and Fault Mode LED Indicators
• Automatic Fan Speed Control
• Automatic Temperature Compensation and Built-in Safety

Industry recognized with the 2010 IBEX Innovation Award, ProNauticP employs our Generation 3 ProMar Digital Performance Charging Platform which combines all digital control and softwarebased power conversion technology with global energy management features. ProNauticP addresses the trend of incorporating and using more 12-volt electronics onboard today’s power, sail, cruising and sport fishing boats. Boasting twelve digitally-controlled performance charging profiles with finger tip selection, ProNauticP fully charges, conditions, maintains and re-conditions batteries while extending battery life and maximizing battery reserve power performance. Designed to provide more time on the water enjoying what you like most?boating.

ProMariner ProNautic 1260P 3 Bank 60 Amp 12vDC Battery Charger 100-240VAC input

• ProMar Digital Charging Performance - 12 Selectable Profiles
• Power Factor Correction - Global AC Input
• Distributed On Demand Technology
• Digital Self-Calculating Absorption and Battery Health Re-Conditioning Mode
• Conservation Energy Saver Mode
• Service and Fault Mode LED Indicators
• Automatic Fan Speed Control
• Automatic Temperature Compensation and Built-in Safety

Industry recognized with the 2010 IBEX Innovation Award, ProNauticP employs our Generation 3 ProMar Digital Performance Charging Platform which combines all digital control and softwarebased power conversion technology with global energy management features. ProNauticP addresses the trend of incorporating and using more 12-volt electronics onboard today’s power, sail, cruising and sport fishing boats. Boasting twelve digitally-controlled performance charging profiles with finger tip selection, ProNauticP fully charges, conditions, maintains and re-conditions batteries while extending battery life and maximizing battery reserve power performance. Designed to provide more time on the water enjoying what you like most?boating.

ProMariner ProIsoCharge120 Zero Volt Loss Isolator 1 Alternator 2 Batteries

• ProMar Digital Performance Zero Volt Loss Isolation and Charging
  All digital design delivers active battery status and automatic engine battery health priority while digitally distributing the full output of your engine’s alternators.
• 
  Intelligent Isolation and Charging Software Control
  ProIsoCharge’s intelligent software control provides priority charging to a battery bank that is under load (i.e house bank or power inverter bank) by taking fully charged batteries off line and priority charging discharged battery banks, while insuring the health of the engine batteries.
• Real Time LED Status Indicators,/b>
  Highly visible LEDs to indicate alternator power is present and battery bank charging status. Fault LEDs include: high and low alternator output, over-voltage protection and high voltage conditions that may be present on any one of the battery banks connected (that are also connected to other charging sources gen set combi etc).
• Ignition Controlled
  Distributed On DemandTM battery bank management will only activate with ignition power on.
• Advance Regulator Ready
  Advance regulator remote sense connection provided for precision alternator algorithm control for alternators equipped with an advanced regulator.
• Easy Installation
  Modular design for easy install. Includes all terminal stud insulator boots and protective snap on safety cover.
• Built-in Safety
  Ignition protected and waterproof to IP66

ProIsoCharge delivers digitally controlled alternator output distribution while protecting the health of engine start batteries, isolating and charging up to 3 other independent battery banks off of a single alternator (model specific). For dual engine applications, ProIsoCharge offers an exclusive 2 alternator input model with up to 4 battery banks. Save space and time by eliminating traditional diode based isolators and ancillary voltage sensitive relays or solenoids, isolating and charging multiple battery banks simultaneously. Eliminate typical alternator voltage loss of up to .6 VDC that is commonly associated with traditional diode based isolators. Intelligent zero volt loss isolation insures fully charged batteries and faster charge times. Installed with the ProNauticPSeries, a boat owner can enjoy the full benefit of shore power and on the water charging. Designed to provide more time on the water enjoying what you like most... Boating.

ProMariner ProIsoCharge180 Zero Volt Loss Isolator 1 Alternator 2 Batteries

• ProMar Digital Performance Zero Volt Loss Isolation and Charging
  All digital design delivers active battery status and automatic engine battery health priority while digitally distributing the full output of your engine’s alternators.
• 
  Intelligent Isolation and Charging Software Control
  ProIsoCharge’s intelligent software control provides priority charging to a battery bank that is under load (i.e house bank or power inverter bank) by taking fully charged batteries off line and priority charging discharged battery banks, while insuring the health of the engine batteries.
• Real Time LED Status Indicators,/b>
  Highly visible LEDs to indicate alternator power is present and battery bank charging status. Fault LEDs include: high and low alternator output, over-voltage protection and high voltage conditions that may be present on any one of the battery banks connected (that are also connected to other charging sources gen set combi etc).
• Ignition Controlled
  Distributed On DemandTM battery bank management will only activate with ignition power on.
• Advance Regulator Ready
  Advance regulator remote sense connection provided for precision alternator algorithm control for alternators equipped with an advanced regulator.
• Easy Installation
  Modular design for easy install. Includes all terminal stud insulator boots and protective snap on safety cover.
• Built-in Safety
  Ignition protected and waterproof to IP66

ProIsoCharge delivers digitally controlled alternator output distribution while protecting the health of engine start batteries, isolating and charging up to 3 other independent battery banks off of a single alternator (model specific). For dual engine applications, ProIsoCharge offers an exclusive 2 alternator input model with up to 4 battery banks. Save space and time by eliminating traditional diode based isolators and ancillary voltage sensitive relays or solenoids, isolating and charging multiple battery banks simultaneously. Eliminate typical alternator voltage loss of up to .6 VDC that is commonly associated with traditional diode based isolators. Intelligent zero volt loss isolation insures fully charged batteries and faster charge times. Installed with the ProNauticPSeries, a boat owner can enjoy the full benefit of shore power and on the water charging. Designed to provide more time on the water enjoying what you like most... Boating.

ProMariner ProNautic 2420P 3 Bank 20 Amp 24vDC Battery Charger 100-240VAC input

• ProMar Digital Charging Performance - 12 Selectable Profiles
• Power Factor Correction - Global AC Input
• Distributed On Demand Technology
• Digital Self-Calculating Absorption and Battery Health Re-Conditioning Mode
• Conservation Energy Saver Mode
• Service and Fault Mode LED Indicators
• Automatic Fan Speed Control
• Automatic Temperature Compensation and Built-in Safety

Industry recognized with the 2010 IBEX Innovation Award, ProNauticP employs our Generation 3 ProMar Digital Performance Charging Platform which combines all digital control and softwarebased power conversion technology with global energy management features. ProNauticP addresses the trend of incorporating and using more 12-volt electronics onboard today’s power, sail, cruising and sport fishing boats. Boasting twelve digitally-controlled performance charging profiles with finger tip selection, ProNauticP fully charges, conditions, maintains and re-conditions batteries while extending battery life and maximizing battery reserve power performance. Designed to provide more time on the water enjoying what you like most?boating.

ProMariner ProNautic 2430P 3 Bank 30 Amp 24vDC Battery Charger 100-240VAC input

• ProMar Digital Charging Performance - 12 Selectable Profiles
• Power Factor Correction - Global AC Input
• Distributed On Demand Technology
• Digital Self-Calculating Absorption and Battery Health Re-Conditioning Mode
• Conservation Energy Saver Mode
• Service and Fault Mode LED Indicators
• Automatic Fan Speed Control
• Automatic Temperature Compensation and Built-in Safety

Industry recognized with the 2010 IBEX Innovation Award, ProNauticP employs our Generation 3 ProMar Digital Performance Charging Platform which combines all digital control and softwarebased power conversion technology with global energy management features. ProNauticP addresses the trend of incorporating and using more 12-volt electronics onboard today’s power, sail, cruising and sport fishing boats. Boasting twelve digitally-controlled performance charging profiles with finger tip selection, ProNauticP fully charges, conditions, maintains and re-conditions batteries while extending battery life and maximizing battery reserve power performance. Designed to provide more time on the water enjoying what you like most?boating.

ProMariner ProIsoCharge120 Zero Volt Loss Isolator 1 Alternator 3 Batteries

• ProMar Digital Performance Zero Volt Loss Isolation and Charging
  All digital design delivers active battery status and automatic engine battery health priority while digitally distributing the full output of your engine’s alternators.
• 
  Intelligent Isolation and Charging Software Control
  ProIsoCharge’s intelligent software control provides priority charging to a battery bank that is under load (i.e house bank or power inverter bank) by taking fully charged batteries off line and priority charging discharged battery banks, while insuring the health of the engine batteries.
• Real Time LED Status Indicators,/b>
  Highly visible LEDs to indicate alternator power is present and battery bank charging status. Fault LEDs include: high and low alternator output, over-voltage protection and high voltage conditions that may be present on any one of the battery banks connected (that are also connected to other charging sources gen set combi etc).
• Ignition Controlled
  Distributed On DemandTM battery bank management will only activate with ignition power on.
• Advance Regulator Ready
  Advance regulator remote sense connection provided for precision alternator algorithm control for alternators equipped with an advanced regulator.
• Easy Installation
  Modular design for easy install. Includes all terminal stud insulator boots and protective snap on safety cover.
• Built-in Safety
  Ignition protected and waterproof to IP66

ProIsoCharge delivers digitally controlled alternator output distribution while protecting the health of engine start batteries, isolating and charging up to 3 other independent battery banks off of a single alternator (model specific). For dual engine applications, ProIsoCharge offers an exclusive 2 alternator input model with up to 4 battery banks. Save space and time by eliminating traditional diode based isolators and ancillary voltage sensitive relays or solenoids, isolating and charging multiple battery banks simultaneously. Eliminate typical alternator voltage loss of up to .6 VDC that is commonly associated with traditional diode based isolators. Intelligent zero volt loss isolation insures fully charged batteries and faster charge times. Installed with the ProNauticPSeries, a boat owner can enjoy the full benefit of shore power and on the water charging. Designed to provide more time on the water enjoying what you like most... Boating.

ProMariner ProIsoCharge180 Zero Volt Loss Isolator 1 Alternator 3 Batteries

• ProMar Digital Performance Zero Volt Loss Isolation and Charging
  All digital design delivers active battery status and automatic engine battery health priority while digitally distributing the full output of your engine’s alternators.
• 
  Intelligent Isolation and Charging Software Control
  ProIsoCharge’s intelligent software control provides priority charging to a battery bank that is under load (i.e house bank or power inverter bank) by taking fully charged batteries off line and priority charging discharged battery banks, while insuring the health of the engine batteries.
• Real Time LED Status Indicators,/b>
  Highly visible LEDs to indicate alternator power is present and battery bank charging status. Fault LEDs include: high and low alternator output, over-voltage protection and high voltage conditions that may be present on any one of the battery banks connected (that are also connected to other charging sources gen set combi etc).
• Ignition Controlled
  Distributed On DemandTM battery bank management will only activate with ignition power on.
• Advance Regulator Ready
  Advance regulator remote sense connection provided for precision alternator algorithm control for alternators equipped with an advanced regulator.
• Easy Installation
  Modular design for easy install. Includes all terminal stud insulator boots and protective snap on safety cover.
• Built-in Safety
  Ignition protected and waterproof to IP66

ProIsoCharge delivers digitally controlled alternator output distribution while protecting the health of engine start batteries, isolating and charging up to 3 other independent battery banks off of a single alternator (model specific). For dual engine applications, ProIsoCharge offers an exclusive 2 alternator input model with up to 4 battery banks. Save space and time by eliminating traditional diode based isolators and ancillary voltage sensitive relays or solenoids, isolating and charging multiple battery banks simultaneously. Eliminate typical alternator voltage loss of up to .6 VDC that is commonly associated with traditional diode based isolators. Intelligent zero volt loss isolation insures fully charged batteries and faster charge times. Installed with the ProNauticPSeries, a boat owner can enjoy the full benefit of shore power and on the water charging. Designed to provide more time on the water enjoying what you like most... Boating.

ProMariner ProIsoCharge250 Zero Volt Loss Isolator 1 Alternator 3 Batteries

• ProMar Digital Performance Zero Volt Loss Isolation and Charging
  All digital design delivers active battery status and automatic engine battery health priority while digitally distributing the full output of your engine’s alternators.
• 
  Intelligent Isolation and Charging Software Control
  ProIsoCharge’s intelligent software control provides priority charging to a battery bank that is under load (i.e house bank or power inverter bank) by taking fully charged batteries off line and priority charging discharged battery banks, while insuring the health of the engine batteries.
• Real Time LED Status Indicators,/b>
  Highly visible LEDs to indicate alternator power is present and battery bank charging status. Fault LEDs include: high and low alternator output, over-voltage protection and high voltage conditions that may be present on any one of the battery banks connected (that are also connected to other charging sources gen set combi etc).
• Ignition Controlled
  Distributed On DemandTM battery bank management will only activate with ignition power on.
• Advance Regulator Ready
  Advance regulator remote sense connection provided for precision alternator algorithm control for alternators equipped with an advanced regulator.
• Easy Installation
  Modular design for easy install. Includes all terminal stud insulator boots and protective snap on safety cover.
• Built-in Safety
  Ignition protected and waterproof to IP66

ProIsoCharge delivers digitally controlled alternator output distribution while protecting the health of engine start batteries, isolating and charging up to 3 other independent battery banks off of a single alternator (model specific). For dual engine applications, ProIsoCharge offers an exclusive 2 alternator input model with up to 4 battery banks. Save space and time by eliminating traditional diode based isolators and ancillary voltage sensitive relays or solenoids, isolating and charging multiple battery banks simultaneously. Eliminate typical alternator voltage loss of up to .6 VDC that is commonly associated with traditional diode based isolators. Intelligent zero volt loss isolation insures fully charged batteries and faster charge times. Installed with the ProNauticPSeries, a boat owner can enjoy the full benefit of shore power and on the water charging. Designed to provide more time on the water enjoying what you like most... Boating.

ProMariner ProIsoCharge150 Zero Volt Loss Isolator 1 Alternator 3 Batteries

• ProMar Digital Performance Zero Volt Loss Isolation and Charging
  All digital design delivers active battery status and automatic engine battery health priority while digitally distributing the full output of your engine’s alternators.
• 
  Intelligent Isolation and Charging Software Control
  ProIsoCharge’s intelligent software control provides priority charging to a battery bank that is under load (i.e house bank or power inverter bank) by taking fully charged batteries off line and priority charging discharged battery banks, while insuring the health of the engine batteries.
• Real Time LED Status Indicators,/b>
  Highly visible LEDs to indicate alternator power is present and battery bank charging status. Fault LEDs include: high and low alternator output, over-voltage protection and high voltage conditions that may be present on any one of the battery banks connected (that are also connected to other charging sources gen set combi etc).
• Ignition Controlled
  Distributed On DemandTM battery bank management will only activate with ignition power on.
• Advance Regulator Ready
  Advance regulator remote sense connection provided for precision alternator algorithm control for alternators equipped with an advanced regulator.
• Easy Installation
  Modular design for easy install. Includes all terminal stud insulator boots and protective snap on safety cover.
• Built-in Safety
  Ignition protected and waterproof to IP66

ProIsoCharge delivers digitally controlled alternator output distribution while protecting the health of engine start batteries, isolating and charging up to 3 other independent battery banks off of a single alternator (model specific). For dual engine applications, ProIsoCharge offers an exclusive 2 alternator input model with up to 4 battery banks. Save space and time by eliminating traditional diode based isolators and ancillary voltage sensitive relays or solenoids, isolating and charging multiple battery banks simultaneously. Eliminate typical alternator voltage loss of up to .6 VDC that is commonly associated with traditional diode based isolators. Intelligent zero volt loss isolation insures fully charged batteries and faster charge times. Installed with the ProNauticPSeries, a boat owner can enjoy the full benefit of shore power and on the water charging. Designed to provide more time on the water enjoying what you like most... Boating.

ProMariner ProMar1 31505 Digital Series Battery Charger

• Fully Automatice 4-Stage Charging
• Dual mode Charge Status Indicator
• Battery 7 Wiring Fault Detection
• Rugged Shockproof Construction
• Auto Maintain/Energy Saver Mode Extends battery Life
• Safe for Long an Short Term Storage
• Pre-wired with Waterproof Inline DC Fuses and Nickel Plated Copper Ring Terminals

ProMar1 DS Generation 3 reflects a new outward design taken to the next level in performance with all Digital Charging Technology. Fully Automatic with a 4-Stage Charging algorithm proven to extend battery life. Sequential modes of Analyzing, Charging, Conditioning and built-in Auto Maintain mode,safe for short and long term storage periods. ProMar1 DS features include: Battery Trouble Status LED per charging output identifying battery or installation wiring conditions requiring attention, waterproof inline fuse holder that is easily separated with a threaded two part design, dual mode Charge Status LED indication of each battery being individually charged and maintained.

ProMar1 DS is designed for use in harsh outdoor environments with indusbial grade jacketed DC cables,JTOW outdoor rated ACpower cable for maximum wiringprotection, in addition to fully encapsulated IP68 waterproof and shock proof construction

Designed and certified to UL Marine 1236,the new energy efficient CEC (California Energy Commission) and DOE (Department of Energy) requirements.

Industry standard power ratings for moderate charge times and a single preset charging algorithm,safe for Flooded (Lead Acid) or Gel batteries.

ProMariner ProMar1 31510 Digital Series Battery Charger

• Fully Automatice 4-Stage Charging
• Dual mode Charge Status Indicator
• Battery 7 Wiring Fault Detection
• Rugged Shockproof Construction
• Auto Maintain/Energy Saver Mode Extends battery Life
• Safe for Long an Short Term Storage
• Pre-wired with Waterproof Inline DC Fuses and Nickel Plated Copper Ring Terminals

ProMar1 DS Generation 3 reflects a new outward design taken to the next level in performance with all Digital Charging Technology. Fully Automatic with a 4-Stage Charging algorithm proven to extend battery life. Sequential modes of Analyzing, Charging, Conditioning and built-in Auto Maintain mode,safe for short and long term storage periods. ProMar1 DS features include: Battery Trouble Status LED per charging output identifying battery or installation wiring conditions requiring attention, waterproof inline fuse holder that is easily separated with a threaded two part design, dual mode Charge Status LED indication of each battery being individually charged and maintained.

ProMar1 DS is designed for use in harsh outdoor environments with indusbial grade jacketed DC cables,JTOW outdoor rated ACpower cable for maximum wiringprotection, in addition to fully encapsulated IP68 waterproof and shock proof construction

Designed and certified to UL Marine 1236,the new energy efficient CEC (California Energy Commission) and DOE (Department of Energy) requirements.

Industry standard power ratings for moderate charge times and a single preset charging algorithm,safe for Flooded (Lead Acid) or Gel batteries.

ProMariner ProMar1 31515 Digital Series Battery Charger

• Fully Automatice 4-Stage Charging
• Dual mode Charge Status Indicator
• Battery 7 Wiring Fault Detection
• Rugged Shockproof Construction
• Auto Maintain/Energy Saver Mode Extends battery Life
• Safe for Long an Short Term Storage
• Pre-wired with Waterproof Inline DC Fuses and Nickel Plated Copper Ring Terminals

ProMar1 DS Generation 3 reflects a new outward design taken to the next level in performance with all Digital Charging Technology. Fully Automatic with a 4-Stage Charging algorithm proven to extend battery life. Sequential modes of Analyzing, Charging, Conditioning and built-in Auto Maintain mode,safe for short and long term storage periods. ProMar1 DS features include: Battery Trouble Status LED per charging output identifying battery or installation wiring conditions requiring attention, waterproof inline fuse holder that is easily separated with a threaded two part design, dual mode Charge Status LED indication of each battery being individually charged and maintained.

ProMar1 DS is designed for use in harsh outdoor environments with indusbial grade jacketed DC cables,JTOW outdoor rated ACpower cable for maximum wiringprotection, in addition to fully encapsulated IP68 waterproof and shock proof construction

Designed and certified to UL Marine 1236,the new energy efficient CEC (California Energy Commission) and DOE (Department of Energy) requirements.

Industry standard power ratings for moderate charge times and a single preset charging algorithm,safe for Flooded (Lead Acid) or Gel batteries.

ProMariner ProSport 1.5

Battery Maintainer 1 Bank 120v Input 12V

• Fully automatic energy saving design
• Multi-use design, easily configures for on-board or portable use
• Concealed mounting holes and die cut foam resting pad for portable use
• Expanded LED display for Power, Charging and Auto Maintain status
• Maintain 12 volt lead acid (sealed and vented) batteries up to 150 amp hours
• Quick connect DC clamp and ring terminal cable assemblies
• Weatherproof and water resistant to IP65
• Built-in safety with reverse polarity, short circuit, temperature and ignition protection
• Pre-wired for easy installation
• 3 year warranty

This fully automatic battery maintainer and charger is ideal for personal watercraft, recreational ski and wake boats, ATV’s, tractors and more. Our newest generation ProSport 1.5 Amp fully automatic maintainer is an innovative multi-use charger designed for maximum utility. Concealed mounting holes allow the ProSport 1.5 to be installed on-board or to be used as a portable, with rear die cut foam resting pad. Ring terminal and DC clamp quick connect cable assemblies included. Our marine grade design is weatherproof, water resistant to IP 65 and can be used in all fresh and salt water outdoor and indoor applications as needed. Designed to keep 12 volt batteries fully charged during short or long term storage periods, ProSport’s Energy Saver mode will monitor and auto maintain a battery when needed to maintain a full state of charge. ProSport 1.5 significantly reduces AC Power consumption, lowers operating costs and maximizes reserve power performance.

ProMariner ProSport HD 20 Gen4

8 Amp Battery Charger 12/24v 2 Bank 120v Input

• Microprocessor and software controlled charging technology for fast, precise charging.
• 100% of all available charging amps are utlilized by distributing unused charging amps to any one or combination of all batteries as needed.
• Upper, lower and rear facing heat sink design for optimal cooling while delivering true rated constant current charging amps during its two charge mode.
• LED fuel gauge style completion status. Four color multi-stage mode LED status bar. Mult-stage Charge Mode, Systems Check OK, individual Battery Status and Battery Type indication.
• Up to 40% lighter compared to an opoxy filled charger.
• Monitor and auto maintain batteries only when needed to maintain full staye of charge. This significantly reduces AC power consumption.
• 5 Stages: Analyzes, charages, conditions, auto maintains and reconditions batteries once a month during storage periods. Fully charges and extends battery life.
• Dual inline waterproof fuses, reverse polarity, over-temperatures, over-current, over-voltage and ignition protection. Certified to Marine UL 1236. CEC and DOE listed. FCC Class B.
• Pre-wired with 6 feet AC and DC cables.
• Battry Type: Group 24-31 Flooded, AGM, HP AGM, & GEL batteries
• 3 Year Warranty

ProSpsortHD Generation 4 boasts a new tri-surface heatsink design. This new heavy-duty lightweight design delivers significantly faster charging trhoug optimal cooling, while delivering true rated amp output during charge mode.

ProSprortHD’S enhanced microprocessor and software provides new digital features including: fuel gauge style Charge Completion Monitor, Charge Mode, invididual Fault indicators and three digitally selectable performance charge profiles for Flooded (lead acid), AGM and Gel batteries. HP AGM profile on ProSport HD 20 Dual only.

Fully automatic 5-stage charging enhances battery performance while extending battery life. System Check OK and Battery Status indicators provide real time installation and battery fault status.

Desiagned for use in harsh enviornments with our industrial grade jacketed DC and AC power cables which include new modled strain reliefs and wire splitters.

ProMariner ProSport HD 6 Gen 4

6 Amp Battery Charger 12v 1 Bank 120v Input

• ProMar Digital Technology Microprocessor and software controlled charging technology for fast, precise charging
• Distributed-On-DemandTM Technology 100% of all available charging amps are utilized by distributing unused charging amps to any one or combination of all batteries as needed
• Heavy Duty Tri-Surface Extruded Heat Sink Design Upper, lower and rear facing heat sink design for optimal cooling while delivering true rated constant current charging amps during its two charge mode
• Expanded LED Display with Completion Status Gauge LED fuel gauge style completion status. Four color multi-stage mode LED status bar. Multi-stage Charge Mode, System Check OK, individual Battery Status and Battery Type indication
• Lightweight Design Up to 40% lighter compared to an epoxy filled charger
• Auto-Maintain Energy Saver Mode Monitor and auto maintain batteries only when needed to maintain full state of charge. This significantly reduces AC power consumption
• Fully Automatic 5-Stage Digital Performance Charging 5 Stages: Analyzes, charges, conditions, auto maintains and reconditions batteries once a month during storage periods. Fully charges and extends battery life
• Built-in Quality and Safety Dual inline waterproof fuses, reverse polarity, over-temperature, over-current, over-voltage and ignition protection. Certified to Marine UL 1236. CEC and DOE listed. FCC Class B
• Easy Installation and Operation Pre-wired with 6 feet AC and DC cables
• Battery Type: Group 24-31 Flooded, AGM, HP AGM and GEL batteries
• 3 Year Warranty

ProSportHD Generation 4 boasts a tri-surface heatsink design. This heavy-duty lightweight design delivers significantly faster charging through optimal cooling, while delivering true rated amp output during charge mode.

ProSportHD’s enhanced microprocessor and software provides digital features including: fuel gauge style Charge Completion Monitor, Charge Mode, individual Fault indicators and three digitally selectable performance charge profiles for Flooded (lead acid), AGM and GEL batteries. HP AGM profile on ProSportHD 20 Dual only.

Fully automatic 5-stage charging enhances battery performance while extending battery life. System Check OK and Battery Status indicators provide real time installation and battery fault status.

Designed for use in harsh environments with our industrial grade jacketed DC and AC power cables which include molded strain reliefs and wire splitters.

ProMariner ProSport HD 20 Gen4

12 Amp Battery Charger 12/24v 2 Bank 120v Input

• Microprocessor and software controlled charging technology for fast, precise charging.
• 100% of all available charging amps are utlilized by distributing unused charging amps to any one or combination of all batteries as needed.
• Upper, lower and rear facing heat sink design for optimal cooling while delivering true rated constant current charging amps during its two charge mode.
• LED fuel gauge style completion status. Four color multi-stage mode LED status bar. Mult-stage Charge Mode, Systems Check OK, individual Battery Status and Battery Type indication.
• Up to 40% lighter compared to an opoxy filled charger.
• Monitor and auto maintain batteries only when needed to maintain full staye of charge. This significantly reduces AC power consumption.
• 5 Stages: Analyzes, charages, conditions, auto maintains and reconditions batteries once a month during storage periods. Fully charges and extends battery life.
• Dual inline waterproof fuses, reverse polarity, over-temperatures, over-current, over-voltage and ignition protection. Certified to Marine UL 1236. CEC and DOE listed. FCC Class B.
• Pre-wired with 6 feet AC and DC cables.
• Battry Type: Group 24-31 Flooded, AGM, HP AGM, & GEL batteries
• 3 Year Warranty

ProSpsortHD Generation 4 boasts a new tri-surface heatsink design. This new heavy-duty lightweight design delivers significantly faster charging trhoug optimal cooling, while delivering true rated amp output during charge mode.

ProSprortHD’S enhanced microprocessor and software provides new digital features including: fuel gauge style Charge Completion Monitor, Charge Mode, invididual Fault indicators and three digitally selectable performance charge profiles for Flooded (lead acid), AGM and Gel batteries. HP AGM profile on ProSport HD 20 Dual only.

Fully automatic 5-stage charging enhances battery performance while extending battery life. System Check OK and Battery Status indicators provide real time installation and battery fault status.

Desiagned for use in harsh enviornments with our industrial grade jacketed DC and AC power cables which include new modled strain reliefs and wire splitters.

ProMariner ProSport HD 20 Gen4

12/24v 2 Bank 120v Input

• Microprocessor and software controlled charging technology for fast, precise charging.
• 100% of all available charging amps are utlilized by distributing unused charging amps to any one or combination of all batteries as needed.
• Upper, lower and rear facing heat sink design for optimal cooling while delivering true rated constant current charging amps during its two charge mode.
• LED fuel gauge style completion status. Four color multi-stage mode LED status bar. Mult-stage Charge Mode, Systems Check OK, individual Battery Status and Battery Type indication.
• Up to 40% lighter compared to an opoxy filled charger.
• Monitor and auto maintain batteries only when needed to maintain full staye of charge. This significantly reduces AC power consumption.
• 5 Stages: Analyzes, charages, conditions, auto maintains and reconditions batteries once a month during storage periods. Fully charges and extends battery life.
• Dual inline waterproof fuses, reverse polarity, over-temperatures, over-current, over-voltage and ignition protection. Certified to Marine UL 1236. CEC and DOE listed. FCC Class B.
• Pre-wired with 6 feet AC and DC cables.
• Battry Type: Group 24-31 Flooded, AGM, HP AGM, & GEL batteries
• 3 Year Warranty

ProSpsortHD Generation 4 boasts a new tri-surface heatsink design. This new heavy-duty lightweight design delivers significantly faster charging trhoug optimal cooling, while delivering true rated amp output during charge mode.

ProSprortHD’S enhanced microprocessor and software provides new digital features including: fuel gauge style Charge Completion Monitor, Charge Mode, invididual Fault indicators and three digitally selectable performance charge profiles for Flooded (lead acid), AGM and Gel batteries. HP AGM profile on ProSport HD 20 Dual only.

Fully automatic 5-stage charging enhances battery performance while extending battery life. System Check OK and Battery Status indicators provide real time installation and battery fault status.

Desiagned for use in harsh enviornments with our industrial grade jacketed DC and AC power cables which include new modled strain reliefs and wire splitters.

ProMariner ProSport HD 20 Gen4

20 Amp Battery Charger 12/24/36v 3 Bank 120v Input

• ProMariner Digital Technology
• Distributed-On-DemandTM Technology
• Heavy Duty Tri-Surface Extruded Heat Sink Design
• Expanded LED Display with Completion Status Gauge
• Lightweight Design
• Auto-Maintain Energy Saver Mode
• Fully Automatic 5-Stage Digital Performance Charging
• Built-in Quality and Safety
• Easy Installation and Operation

The ProSportHD features a lightweight, tri-surface heatsink design. This delivers significantly faster charging through optimal cooling, while delivering true rated constant current charging amps during charge mode. Fully automatic multi-stage charging enhances battery performance while extending battery life.

ProMariner universal AC Plug Holder+ Black

• Plug clamp insert included
• Converts plug holder to an AC inlet for ProMariner engineered chargers
• No cutting, stripping or rewiring of AC power cord
• Watertight and UV resistant
• easy to reach safe AC power cord connections
• Stainless steel mounting screws included
• Easy installation

• Black plug holder
• Plug clamp insert
• Stainless steel hardware

ProMariner universal AC Plug Holder+ White

• Plug clamp insert included
• Converts plug holder to an AC inlet for ProMariner engineered chargers
• No cutting, stripping or rewiring of AC power cord
• Watertight and UV resistant
• easy to reach safe AC power cord connections
• Stainless steel mounting screws included
• Easy installation

• White plug holder
• Plug clamp insert
• Stainless steel hardware

ProMariner 15 feet Universal Charger DC Extension Cables

Rated up to 30 amps

Color coded for quick and easy installation

Waterproof dual in-line fuses

No cutting, stripping or splicing required

Slide & snap fully insulated connection covers

Corrosion resistant tinned 12 AWG copper wire and gold plated hardware

Dual inline waterproof fuses for maximum wire protection

Use with all on-board marine battery chargers when standard battery charger cables do not reach your bow, center mount or stern battery compartments.