Manual Oil Change Pump 

Convenient hand pump drains oil through the dipstick on inboard and I/O engines. Includes 2 drain tubes.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Speedometer Pitot Tube Kit 

Universal design works with most Speedo’s. 522100(-1) are Pitot Tube only. Speedometer Pitot Tube Installation Kit 522105-1 includes pitot, pitot tube shield, clamps, and mounting screws.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Locker Vent - 2-3/8" x 6-3/4" 

Locker Vents are designed to promote air circulation in interior areas and prevent mold, mildew, and unpleasant odors. Easy to install with six #8 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction. Vent area 2.56 in2.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Drain Cover - 3-1/4" 

Stamped 304 Stainless Steel

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Butterfly Vent - Center Knob - 5" 

Butterfly Vents promote air flow preventing mold, mildew, and associated odors. Features a center knob that allows for easy adjustment of the opening. Corrosion resistant 304 stainless steel construction. Installs with four #6 RH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Butterfly Vent - Center Knob - 4" 

Butterfly Vents promote air flow preventing mold, mildew, and associated odors. Features a center knob that allows for easy adjustment of the opening. Corrosion resistant 304 stainless steel construction. Installs with four #6 RH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Round Louvered Vent - 5" 

Round Louvered Vents allow air in while keeping water out. Installs with four #6 FH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction. Vent area 5” 2.02 in2.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Round Louvered Vent - 4" 

Round Louvered Vents allow air in while keeping water out. Installs with four #6 FH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction. Vent area 4” 0.88 in2.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Louvered Vent - 5" x 9" 

Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with six #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Louvered Vent - Oval - 9-1/8" x 4-5/8" 

Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with six #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Louvered Vent - 9-1/8" x 4-5/8" 

Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with six #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Louvered Vent - 5" x 4-5/8" 

Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with six #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Louvered Vent - 5" x 2-5/8" 

Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with six #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Midget Vent - Heavy Duty 

Heavy Duty Midget Vents feature a reinforced rim, making them durable enough to stand on. Great for routing cables or wires through a hole or for covering thru-hull openings to shield water spray. Ideal for small lockers, they provide attractive cover for ventilation holes while also preventing odors. Stamped 304 stainless steel construction. Easy to install with pre-drilled holes for three #6 RH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Midget Vent - Medium 

Midget Vents provide a splash-proof opening through transoms, cabin sides, etc. Great for routing cables and wires or for covering thru-hull openings to shield water spray. Ideal for small lockers, they provide attractive cover for ventilation holes while also preventing odors. Corrosion resistant stamped 304 stainless steel construction. Easy to install with pre-drilled holes for three #6 RH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Midget Vent - Small 

Midget Vents provide a splash-proof opening through transoms, cabin sides, etc. Great for routing cables and wires or for covering thru-hull openings to shield water spray. Ideal for small lockers, they provide attractive cover for ventilation holes while also preventing odors. Corrosion resistant stamped 304 stainless steel construction. Easy to install with pre-drilled holes for three #6 RH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Clam Shell Vent - Large

Large Clam Shell Ventilators provide splash protection for vent holes, wires, cable runs, or blower-exhaust hose openings. Corrosion resistant 304 stamped stainless steel construction. Can be used for cabin ventilation with the addition of a dorade box. Clam Shell Vents are ideal for applications where a taller vent would foul lines or restrict crew movement. Easy to install with pre-drilled holes for five #6 RH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Clam Shell Vent - Small 

Large Clam Shell Ventilators provide splash protection for vent holes, wires, cable runs, or blower-exhaust hose openings. Corrosion resistant 304 stamped stainless steel construction. Can be used for cabin ventilation with the addition of a dorade box. Clam Shell Vents are ideal for applications where a taller vent would foul lines or restrict crew movement. Easy to install with pre-drilled holes for five #6 RH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Clam Shell Vent - Mini 

Mini Clam Shell Ventilators provide splash protection for vent holes, wires, cable runs, or blower-exhaust hose openings. Corrosion resistant 304 stamped stainless steel construction. Can be used for cabin ventilation with the addition of a dorade box. Clam Shell Vents are ideal for applications where a taller vent would foul lines or restrict crew movement. Easy to install with pre-drilled holes for five #6 RH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Cowl Vent 

Cowl Vent provides fresh air below decks by trapping air that comes across the top deck and forcing it into your boat’s cabin or interior. Stamped 304 stainless steel construction. Installs with four #8 FH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Cowl Vent with Base - 3" Hose 

Cowl Vent with Base provides fresh air below decks by trapping air that comes across the top deck and forcing it into your boat’s cabin or interior. Stamped 304 stainless steel construction with black plastic base. Designed for use with 3” ventilation hose. Installs with four #8 or #10 FH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Cupboard Bolt 

Surface mounted to the front of a cupboard door, these Cupboard Bolts are used to secure cabinet doors while underway. Corrosion resistant chrome plated extruded brass construction. Installs easily with six #6 FH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

T-Handle Locking Compression Latch 

Investment cast 316 stainless steel construction for corrosion resistance and durability. This latch features a T-handle to engage the offset locking arm. Handle is recessed for a flush, clean installation. Locking feature for secure hatches. Includes heavy duty stainless key. Requires a 2” size cutout hole and installs with a back mounted stainless cup.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Hatch Handle Latch - 3-3/4" x 3" 

Constructed of sand cast brass with a chrome plated finish. These Hatch Handle Latches are ideal for use on doors, hatches, lazarettes, and dock boxes. Handle pivots out to open hatches and lays flush when not in use for a clean appearance. Adjustable locking arm adds additional security. Installs with four #8 FH fasteners (not included). Once installed, the locking arm can be trimmed to length.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Hatch Handle Latch - 3-1/8" x 2-11/16"

Constructed of sand cast brass with a chrome plated finish. These Hatch Handle Latches are ideal for use on doors, hatches, lazarettes, and dock boxes. Handle pivots out to open hatches and lays flush when not in use for a clean appearance. Adjustable locking arm adds additional security. Installs with four #8 FH fasteners (not included). Once installed, the locking arm can be trimmed to length.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Cam Lock 

This cylindrical locking assembly features a pivot mechanism that will swivel to engage in a locked or open position merely by turning the cam assembly. Die cast zinc lock installs with back mounted 304 stainless steel nut. Comes complete with two locking arms for flush or offset installations and two matching keys. Keys are random so keyed alike cam locks cannot be guaranteed.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

T-Handle Latch 

Investment cast 316 stainless steel construction for corrosion resistance and durability. This latch features a recessed T-handle for a flush, clean installation. Installs with four #8 FH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Round T-Handle Slam Latch 

Constructed of 316 stainless steel for corrosion resistance and durability. These slam latches feature push to close functionality. Activated by the shutting or slamming of a door slam latches are designed so that a spring inside automatically retracts the latch, engaging the keeper, retaining the cover against the frame. Fast and easy to use this latch features a recessed T-handle for quick access. Spring loaded handles help prevent rattling. Easy to install by simply inserting the latch body through a single round 2” cut-out and screwing on the back plate. Includes hardware to mount latch. Keeper hardware not included.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Gate Latch 

Investment cast 316 stainless steel construction for corrosion resistance and durability. This gate latch is designed to be used with 1-1/4" square tubing. Ideal for pontoon gates. Installs with 1/4" thru bolt (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Twin Roller Door Catch - White 

Upgrade your cabinet or wardrobe with these Twin Roller Door Catches. Sturdy injection molded nylon construction these catches provide secure door closure. Installs with four #6 RH fasteners (not included). 

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Door Catch 

Constructed of sturdy injection molded nylon. These Door Catches provide secure closure for cabinet doors. Installs with four #6 RH fasteners (not included). 

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Roller Catch - Surface Mount 

Constructed of sturdy injection molded nylon. These catches feature stainless steel springs and provide secure closure for cabinet doors. Installs with four #8 RH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Elbow Catch 

This spring-loaded injection molded nylon Elbow Catch is ideal for the inactive side of a pair of cabinet doors. For use on wood or metal doors where no frame is present between doors. Surface mounted. These catches are quick and simple to install and allow for door to lock shut when pushed. Requires releasing the hook to open the door, making them very secure. Traditionally used in conjunction with a touch or magnetic latch on the primary door. Latch installs with two #6 FH fasteners. Slotted hole in catch allows for adjustable installation. Installation hardware not included.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Flexible Door Catch 

Constructed of sturdy UV-resistant injection-molded nylon with a stainless steel spring clip. These Flexible Door Catches guarantee ease of alignment and durability in use. Includes a 304 stainless steel adjustable door strike. 

*Installs with two #4 RH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Push Button Rim Latch - Polished Chrome 

Display parts come complete with both strike plates. Hole spacing on flat strike plate (224320) is 1-7/8". Hole spacing on 90° strike plate (224321) is 1-3/16". Both require a #4 FH fastener.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Push Button Cabinet Latch - Rectangular

These corrosion resistant 316 stainless steel Cabinet Latches function as both a latch and handle. Push button operation activates and secures the latch with a simple, deliberate motion. Positive action locking function prevents cabinets from opening while in motion. Easy to install by boring a single 3/4” hole. Suitable for left or right-hand side uses. Sleek, low-profile design makes them convenient in tight spaces. Great for glove compartments. Includes catch.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Push Button Cabinet Latch - Oval 

These corrosion resistant 316 stainless steel Cabinet Latches function as both a latch and handle. Push button operation activates and secures the latch with a simple, deliberate motion. Positive action locking function prevents cabinets from opening while in motion. Easy to install by boring a single 3/4” hole. Suitable for left or right-hand side uses. Sleek, low-profile design makes them convenient in tight spaces. Great for glove compartments. Includes catch.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Door Stop & Catch - Brass - 2" 

The Sea-Dog® Door Stop and Catch holds the door securely against the rubber stop, effectively reducing rattling common with most door hooks. The spring-loaded latch allows for quick and easy release. Constructed of sand cast brass with a plain polished or chrome plated finish. These door stops are both decorative and functional. Installs with five #6 FH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Door Stop & Catch - Chrome - 2" 

The Sea-Dog® Door Stop and Catch holds the door securely against the rubber stop, effectively reducing rattling common with most door hooks. The spring-loaded latch allows for quick and easy release. Constructed of sand cast brass with a plain polished or chrome plated finish. These door stops are both decorative and functional. Installs with five #6 FH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Barrel Bolt - Chrome Finish - 2-7/8" 

Constructed of durable chrome plated sand cast brass. These surface mounted Barrel Bolts provide additional security as either a primary or back-up locking system. Ideal for use on doors, gates, and cabinets. Appropriate for vertical, horizontal, left, or right-hand applications. In vertical use,, notch in barrel holds bolt in locked position. Installs with six #6 FH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Barrel Bolt - Chrome Finish - 3" 

Constructed of chrome plated extruded brass. These surface mounted Barrel Bolts provide additional security as either a primary or back-up locking system. Ideal for use on doors, gates, and cabinets. Appropriate for vertical, horizontal, left, or right-hand applications. In vertical use, notch in barrel holds bolt in locked position. Installs with six #6 FH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Barrel Bolt - Chrome Finish - 2-1/2" 

Constructed of chrome plated extruded brass. These surface mounted Barrel Bolts provide additional security as either a primary or back-up locking system. Ideal for use on doors, gates, and cabinets. Appropriate for vertical, horizontal, left, or right-hand applications. In vertical use, notch in barrel holds bolt in locked position. Installs with six #6 FH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Barrel Bolt - Chrome Finish - 2" 

Constructed of chrome plated extruded brass. These surface mounted Barrel Bolts provide additional security as either a primary or back-up locking system. Ideal for use on doors, gates, and cabinets. Appropriate for vertical, horizontal, left, or right-hand applications. In vertical use, notch in barrel holds bolt in locked position. Installs with six #6 FH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Barrel Bolt - Chrome Finish - 1-1/2" 

Constructed of chrome plated extruded brass. These surface mounted Barrel Bolts provide additional security as either a primary or back-up locking system. Ideal for use on doors, gates, and cabinets. Appropriate for vertical, horizontal, left, or right-hand applications. In vertical use, notch in barrel holds bolt in locked position. Installs with six #6 FH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

90° Gas Lift Mount - Wide 

90° Gas Lift Mounts are constructed of stamped 304 stainless steel. Used for mounting gas filled lift springs. Installs with #10 RH fasteners (not included). 10 mm ball.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Twist Type Hatch Adjuster with Elbow - 14" 

Constructed of corrosion resistant formed 304 stainless steel with UV resistant injection molded nylon mounting pads and knob. These Hatch Adjusters feature a simple twist knob to lock into position. Great for dock box lids, hatches, windshields, etc.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Twist Type Hatch Adjuster with Elbow - 11" 

Constructed of corrosion resistant formed 304 stainless steel with UV resistant injection molded nylon mounting pads and knob. These Hatch Adjusters feature a simple twist knob to lock into position. Great for dock box lids, hatches, windshields, etc.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Hatch Adjuster - 14" 

Constructed of corrosion resistant formed 304 stainless steel with UV resistant injection molded nylon mounting pads and knob. These Hatch Adjusters feature a simple thumb screw knob to lock into position. Great for dock box lids, hatches, windshields, etc.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Hatch Adjuster - 11" 

Constructed of corrosion resistant formed 304 stainless steel with UV resistant injection molded nylon mounting pads and knob. These Hatch Adjusters feature a simple thumb screw knob to lock into position. Great for dock box lids, hatches, windshields, etc.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Flush Hatch Pull 

Constructed of corrosion resistant investment cast 316 stainless steel. These hatch pulls are ideal for use on doors, hatches, lazarettes, and dock boxes. Handle pivots out to open hatches and lays flush when not in use for a clean appearance. Installs with four #8 FH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Hatch Cover Pull & Gasket 

Highly corrosion resistant, this Hatch Cover Pull provides a simple and convenient way to open the hatches in your boat. Easy-to-install, it features a stainless steel washer for a tight and secure fit, and a rubber gasket to reduce noise and resist water penetration. Commonly used on deck mounted access hatches, this hatch cover pull not only looks attractive, but is durable for use in harsh marine conditions. Requires a 3/16” hole. Flange pull is 1-1/4” in diameter x 1/8” thick.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stud Mount Hand Rail with LED Lighted Base - 18" 

The LED Stud Mount Hand Rail features integral 5/16”-18 threaded studs and installs with two 5/16”-18 nuts (not included). Constructed of formed 304 stainless steel for corrosion resistance. Mounting bases feature six blue LEDs per base for night visibility. Functional and attractive, with no visible mounting hardware. Shipped as three pieces – one handrail and two bases. 12VDC.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stud Mount Hand Rail with LED Lighted Base - 12" 

The LED Stud Mount Hand Rail features integral 5/16”-18 threaded studs and installs with two 5/16”-18 nuts (not included). Constructed of formed 304 stainless steel for corrosion resistance. Mounting bases feature six blue LEDs per base for night visibility. Functional and attractive, with no visible mounting hardware. Shipped as three pieces – one handrail and two bases. 12VDC.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stud Mount Hand Rail with LED Lighted Base - 10" 

The LED Stud Mount Hand Rail features integral 5/16”-18 threaded studs and installs with two 5/16”-18 nuts (not included). Constructed of formed 304 stainless steel for corrosion resistance. Mounting bases feature six blue LEDs per base for night visibility. Functional and attractive, with no visible mounting hardware. Shipped as three pieces – one handrail and two bases. 12VDC.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Surface Mount Handrail - 24" 

Constructed of corrosion resistant formed 304 stainless steel. These Surface Mount Hand Rails install easily with two 5/16" FH fasteners (not included). Locate a hand rail quickly and conveniently wherever needed. 1” OD tubing for a comfortable grip.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Surface Mount Handrail - 18" 

Constructed of corrosion resistant formed 304 stainless steel. These Surface Mount Hand Rails install easily with two 5/16" FH fasteners (not included). Locate a hand rail quickly and conveniently wherever needed. 1” OD tubing for a comfortable grip.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Surface Mount Handrail - 12" 

Constructed of corrosion resistant formed 304 stainless steel. These Surface Mount Hand Rails install easily with two 5/16" FH fasteners (not included). Locate a hand rail quickly and conveniently wherever needed. 1” OD tubing for a comfortable grip.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Stud Mount Flanged Hand Rail with Mounting Flange - 24" 

These Stud Mounted Flanged Hand Rail features integral 5/16”-18 threaded studs and installs with two 5/16”-18 nuts (not included). Constructed of formed 304 stainless steel for corrosion resistance. Design features flanged ends to provide a larger mounting surface for greater durability. Functional and attractive, with no visible mounting hardware.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Stud Mount Flanged Hand Rail with Mounting Flange - 18" 

These Stud Mounted Flanged Hand Rail features integral 5/16”-18 threaded studs and installs with two 5/16”-18 nuts (not included). Constructed of formed 304 stainless steel for corrosion resistance. Design features flanged ends to provide a larger mounting surface for greater durability. Functional and attractive, with no visible mounting hardware.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Stud Mount Flanged Hand Rail with Mounting Flange - 12" 

These Stud Mounted Flanged Hand Rail features integral 5/16”-18 threaded studs and installs with two 5/16”-18 nuts (not included). Constructed of formed 304 stainless steel for corrosion resistance. Design features flanged ends to provide a larger mounting surface for greater durability. Functional and attractive, with no visible mounting hardware.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Stud Mount Flanged Hand Rail with Mounting Flange - 10" 

These Stud Mounted Flanged Hand Rail features integral 5/16”-18 threaded studs and installs with two 5/16”-18 nuts (not included). Constructed of formed 304 stainless steel for corrosion resistance. Design features flanged ends to provide a larger mounting surface for greater durability. Functional and attractive, with no visible mounting hardware.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Stud Mount Handrail - 24" 

The Stud Mounted Hand Rail features integral 5/16”-18 threaded studs and installs with two 5/16”-18 nuts (not included). Constructed of formed 304 stainless steel for corrosion resistance and durability. Designed to provide a sleek, smooth handrail transition to the mounting surface your boat. Functional and attractive, with no visible mounting hardware.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Stud Mount Handrail - 18" 

The Stud Mounted Hand Rail features integral 5/16”-18 threaded studs and installs with two 5/16”-18 nuts (not included). Constructed of formed 304 stainless steel for corrosion resistance and durability. Designed to provide a sleek, smooth handrail transition to the mounting surface your boat. Functional and attractive, with no visible mounting hardware.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Stud Mount Handrail - 12" 

The Stud Mounted Hand Rail features integral 5/16”-18 threaded studs and installs with two 5/16”-18 nuts (not included). Constructed of formed 304 stainless steel for corrosion resistance and durability. Designed to provide a sleek, smooth handrail transition to the mounting surface your boat. Functional and attractive, with no visible mounting hardware.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Stud Mount Handrail - 6" 

The Stud Mounted Hand Rail features integral 5/16”-18 threaded studs and installs with two 5/16”-18 nuts (not included). Constructed of formed 304 stainless steel for corrosion resistance and durability. Designed to provide a sleek, smooth handrail transition to the mounting surface your boat. Functional and attractive, with no visible mounting hardware.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Gas Filled Lift Spring - 20" - 120# 

Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on our high quality and a 2-year warranty on all Sea-Dog® Gas Springs. 

Sea-Dog® Gas Springs are the ideal choice for all marine, RV, truck cap, tool box, and utility applications because of their unique multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings, and polymer end fittings mean you are buying THE BEST. 

Other applications for Sea-Dog® Gas Springs: Hatches, doors, tool boxes, farm machinery, golf carts, luggage doors, engine hatches, canopies, access hatches, seating, RV doors, furniture, truck caps, and utility boxes. Accepts 10 mm ball.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Gas Filled Lift Spring - 20" - 90# 

Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on our high quality and a 2-year warranty on all Sea-Dog® Gas Springs. 

Sea-Dog® Gas Springs are the ideal choice for all marine, RV, truck cap, tool box, and utility applications because of their unique multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings, and polymer end fittings mean you are buying THE BEST. 

Other applications for Sea-Dog® Gas Springs: Hatches, doors, tool boxes, farm machinery, golf carts, luggage doors, engine hatches, canopies, access hatches, seating, RV doors, furniture, truck caps, and utility boxes. Accepts 10 mm ball.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Gas Filled Lift Spring - 20" - 80# 

Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on our high quality and a 2-year warranty on all Sea-Dog® Gas Springs. 

Sea-Dog® Gas Springs are the ideal choice for all marine, RV, truck cap, tool box, and utility applications because of their unique multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings, and polymer end fittings mean you are buying THE BEST. 

Other applications for Sea-Dog® Gas Springs: Hatches, doors, tool boxes, farm machinery, golf carts, luggage doors, engine hatches, canopies, access hatches, seating, RV doors, furniture, truck caps, and utility boxes. Accepts 10 mm ball.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Gas Filled Lift Spring - 20" - 60# 

Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on our high quality and a 2-year warranty on all Sea-Dog® Gas Springs. 

Sea-Dog® Gas Springs are the ideal choice for all marine, RV, truck cap, tool box, and utility applications because of their unique multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings, and polymer end fittings mean you are buying THE BEST. 

Other applications for Sea-Dog® Gas Springs: Hatches, doors, tool boxes, farm machinery, golf carts, luggage doors, engine hatches, canopies, access hatches, seating, RV doors, furniture, truck caps, and utility boxes. Accepts 10 mm ball.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Gas Filled Lift Spring - 20" - 40# 

Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on our high quality and a 2-year warranty on all Sea-Dog® Gas Springs. 

Sea-Dog® Gas Springs are the ideal choice for all marine, RV, truck cap, tool box, and utility applications because of their unique multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings, and polymer end fittings mean you are buying THE BEST. 

Other applications for Sea-Dog® Gas Springs: Hatches, doors, tool boxes, farm machinery, golf carts, luggage doors, engine hatches, canopies, access hatches, seating, RV doors, furniture, truck caps, and utility boxes. Accepts 10 mm ball.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Gas Filled Lift Spring - 20" - 30# 

Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on our high quality and a 2-year warranty on all Sea-Dog® Gas Springs. 

Sea-Dog® Gas Springs are the ideal choice for all marine, RV, truck cap, tool box, and utility applications because of their unique multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings, and polymer end fittings mean you are buying THE BEST. 

Other applications for Sea-Dog® Gas Springs: Hatches, doors, tool boxes, farm machinery, golf carts, luggage doors, engine hatches, canopies, access hatches, seating, RV doors, furniture, truck caps, and utility boxes. Accepts 10 mm ball.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Gas Filled Lift Spring - 20" - 20# 

Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on our high quality and a 2-year warranty on all Sea-Dog® Gas Springs. 

Sea-Dog® Gas Springs are the ideal choice for all marine, RV, truck cap, tool box, and utility applications because of their unique multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings, and polymer end fittings mean you are buying THE BEST. 

Other applications for Sea-Dog® Gas Springs: Hatches, doors, tool boxes, farm machinery, golf carts, luggage doors, engine hatches, canopies, access hatches, seating, RV doors, furniture, truck caps, and utility boxes. Accepts 10 mm ball.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Gas Filled Lift Spring - 17" - 60# 

Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on our high quality and a 2-year warranty on all Sea-Dog® Gas Springs. 

Sea-Dog® Gas Springs are the ideal choice for all marine, RV, truck cap, tool box, and utility applications because of their unique multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings, and polymer end fittings mean you are buying THE BEST. 

Other applications for Sea-Dog® Gas Springs: Hatches, doors, tool boxes, farm machinery, golf carts, luggage doors, engine hatches, canopies, access hatches, seating, RV doors, furniture, truck caps, and utility boxes. Accepts 10 mm ball.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Gas Filled Lift Spring - 17" - 40# 

Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on our high quality and a 2-year warranty on all Sea-Dog® Gas Springs. 

Sea-Dog® Gas Springs are the ideal choice for all marine, RV, truck cap, tool box, and utility applications because of their unique multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings, and polymer end fittings mean you are buying THE BEST. 

Other applications for Sea-Dog® Gas Springs: Hatches, doors, tool boxes, farm machinery, golf carts, luggage doors, engine hatches, canopies, access hatches, seating, RV doors, furniture, truck caps, and utility boxes. Accepts 10 mm ball.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Gas Filled Lift Spring - 17" - 30# 

Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on our high quality and a 2-year warranty on all Sea-Dog® Gas Springs. 

Sea-Dog® Gas Springs are the ideal choice for all marine, RV, truck cap, tool box, and utility applications because of their unique multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings, and polymer end fittings mean you are buying THE BEST. 

Other applications for Sea-Dog® Gas Springs: Hatches, doors, tool boxes, farm machinery, golf carts, luggage doors, engine hatches, canopies, access hatches, seating, RV doors, furniture, truck caps, and utility boxes. Accepts 10 mm ball.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Gas Filled Lift Spring - 15" - 60# 

Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on our high quality and a 2-year warranty on all Sea-Dog® Gas Springs. 

Sea-Dog® Gas Springs are the ideal choice for all marine, RV, truck cap, tool box, and utility applications because of their unique multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings, and polymer end fittings mean you are buying THE BEST. 

Other applications for Sea-Dog® Gas Springs: Hatches, doors, tool boxes, farm machinery, golf carts, luggage doors, engine hatches, canopies, access hatches, seating, RV doors, furniture, truck caps, and utility boxes. Accepts 10 mm ball.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Gas Filled Lift Spring - 15" - 40# 

Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on our high quality and a 2-year warranty on all Sea-Dog® Gas Springs. 

Sea-Dog® Gas Springs are the ideal choice for all marine, RV, truck cap, tool box, and utility applications because of their unique multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings, and polymer end fittings mean you are buying THE BEST. 

Other applications for Sea-Dog® Gas Springs: Hatches, doors, tool boxes, farm machinery, golf carts, luggage doors, engine hatches, canopies, access hatches, seating, RV doors, furniture, truck caps, and utility boxes. Accepts 10 mm ball.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Gas Filled Lift Spring - 15" - 30# 

Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on our high quality and a 2-year warranty on all Sea-Dog® Gas Springs. 

Sea-Dog® Gas Springs are the ideal choice for all marine, RV, truck cap, tool box, and utility applications because of their unique multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings, and polymer end fittings mean you are buying THE BEST. 

Other applications for Sea-Dog® Gas Springs: Hatches, doors, tool boxes, farm machinery, golf carts, luggage doors, engine hatches, canopies, access hatches, seating, RV doors, furniture, truck caps, and utility boxes. Accepts 10 mm ball.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Gas Filled Lift Spring - 15" - 20# 

Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on our high quality and a 2-year warranty on all Sea-Dog® Gas Springs. 

Sea-Dog® Gas Springs are the ideal choice for all marine, RV, truck cap, tool box, and utility applications because of their unique multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings, and polymer end fittings mean you are buying THE BEST. 

Other applications for Sea-Dog® Gas Springs: Hatches, doors, tool boxes, farm machinery, golf carts, luggage doors, engine hatches, canopies, access hatches, seating, RV doors, furniture, truck caps, and utility boxes. Accepts 10 mm ball.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Gas Filled Lift Spring - 10" - 60# 

Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on our high quality and a 2-year warranty on all Sea-Dog® Gas Springs. 

Sea-Dog® Gas Springs are the ideal choice for all marine, RV, truck cap, tool box, and utility applications because of their unique multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings, and polymer end fittings mean you are buying THE BEST. 

Other applications for Sea-Dog® Gas Springs: Hatches, doors, tool boxes, farm machinery, golf carts, luggage doors, engine hatches, canopies, access hatches, seating, RV doors, furniture, truck caps, and utility boxes. Accepts 10 mm ball.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Gas Filled Lift Spring - 10" - 40# 

Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on our high quality and a 2-year warranty on all Sea-Dog® Gas Springs. 

Sea-Dog® Gas Springs are the ideal choice for all marine, RV, truck cap, tool box, and utility applications because of their unique multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings, and polymer end fittings mean you are buying THE BEST. 

Other applications for Sea-Dog® Gas Springs: Hatches, doors, tool boxes, farm machinery, golf carts, luggage doors, engine hatches, canopies, access hatches, seating, RV doors, furniture, truck caps, and utility boxes. Accepts 10 mm ball.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Gas Filled Lift Spring - 10" - 20# 

Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on our high quality and a 2-year warranty on all Sea-Dog® Gas Springs. 

Sea-Dog® Gas Springs are the ideal choice for all marine, RV, truck cap, tool box, and utility applications because of their unique multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings, and polymer end fittings mean you are buying THE BEST. 

Other applications for Sea-Dog® Gas Springs: Hatches, doors, tool boxes, farm machinery, golf carts, luggage doors, engine hatches, canopies, access hatches, seating, RV doors, furniture, truck caps, and utility boxes. Accepts 10 mm ball.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Gas Filled Lift Spring - 7-1/2" - 40# 

Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on our high quality and a 2-year warranty on all Sea-Dog® Gas Springs. 

Sea-Dog® Gas Springs are the ideal choice for all marine, RV, truck cap, tool box, and utility applications because of their unique multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings, and polymer end fittings mean you are buying THE BEST. 

Other applications for Sea-Dog® Gas Springs: Hatches, doors, tool boxes, farm machinery, golf carts, luggage doors, engine hatches, canopies, access hatches, seating, RV doors, furniture, truck caps, and utility boxes. Accepts 10 mm ball.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Gas Filled Lift Spring - 7-1/2" - 20# 

Sea-Dog® Gas Springs and hardware are manufactured to marine OE standards and have been installed in marine and RV applications for several years. You can count on our high quality and a 2-year warranty on all Sea-Dog® Gas Springs. 

Sea-Dog® Gas Springs are the ideal choice for all marine, RV, truck cap, tool box, and utility applications because of their unique multi-lobe seal which offers superior service life and performance. Hard chromium plated shafts, bronze bushings, and polymer end fittings mean you are buying THE BEST. 

Other applications for Sea-Dog® Gas Springs: Hatches, doors, tool boxes, farm machinery, golf carts, luggage doors, engine hatches, canopies, access hatches, seating, RV doors, furniture, truck caps, and utility boxes. Accepts 10 mm ball.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Flush Gas Lift Mount 

Flush Gas Lift Mounts are constructed of stamped 304 stainless steel. Used for mounting gas filled lift springs. Installs with three #10 RH fasteners (not included). 10 mm ball.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

90° Gas Lift Mount - Narrow 

90° Gas Lift Mounts are constructed of stamped 304 stainless steel. Used for mounting gas filled lift springs. Installs with #10 RH fasteners (not included). 10 mm ball.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Quarter-Turn Smooth Deck Plate with Internal Collar - Black - 8" 

The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Quarter-Turn Smooth Deck Plate with Internal Collar - White - 8" 

The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Quarter-Turn Smooth Deck Plate with Internal Collar - Black - 6" 

The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Quarter-Turn Smooth Deck Plate with Internal Collar - White - 6" 

The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Quarter-Turn Smooth Deck Plate with Internal Collar - Black - 5" 

The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Quarter-Turn Smooth Deck Plate with Internal Collar - White - 5" 

The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Quarter-Turn Smooth Deck Plate with Internal Collar - Black - 4" 

The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents. 

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Quarter-Turn Smooth Deck Plate with Internal Collar - White - 4" 

The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Pop-Out Textured Deck Plate - White - 6"

The Sea-Dog® Pop-Out Deck Plate is constructed of UV stabilized molded ABS and polycarbonate for its structural strength, as well as weather and corrosion resistance. The integrated, pop-up lever makes opening and closing a snap; no tools required. Rubber O-ring provides a watertight fit. Patent Pending. Avoid contact with acetone or strong solvents.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Smooth Quarter Turn Deck Plate - Black - 8" 

The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Installs with six #8 FH fasteners (not included). Patent Pending. Avoid contact with acetone or strong solvents.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Smooth Quarter Turn Deck Plate - Black - 6" 

The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Installs with six #8 FH fasteners (not included). Patent Pending. Avoid contact with acetone or strong solvents.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Smooth Quarter Turn Deck Plate - White - 6" 

The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Installs with six #8 FH fasteners (not included). Patent Pending. Avoid contact with acetone or strong solvents.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Smooth Quarter Turn Deck Plate - Black - 5" 

The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Installs with six #8 FH fasteners (not included). Patent Pending. Avoid contact with acetone or strong solvents.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Smooth Quarter Turn Deck Plate - White - 5" 

The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Installs with six #8 FH fasteners (not included). Patent Pending. Avoid contact with acetone or strong solvents.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Smooth Quarter Turn Deck Plate - Black - 4" 

The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Installs with six #8 FH fasteners (not included). Patent Pending. Avoid contact with acetone or strong solvents.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Smooth Quarter Turn Deck Plate - White - 4" 

The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Installs with six #8 FH fasteners (not included). Patent Pending. Avoid contact with acetone or strong solvents.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Screw-Out Deck Plate - Black - 6" 

Sea-Dog® Screw-Out Deck Plates are molded to the highest standards using top quality UV stabilizers and antioxidants. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Screw-Out Deck Plate - White - 6" 

Sea-Dog® Screw-Out Deck Plates are molded to the highest standards using top quality UV stabilizers and antioxidants. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Screw-Out Deck Plate - Black - 5" 

Sea-Dog® Screw-Out Deck Plates are molded to the highest standards using top quality UV stabilizers and antioxidants. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Screw-Out Deck Plate - White - 5" 

Sea-Dog® Screw-Out Deck Plates are molded to the highest standards using top quality UV stabilizers and antioxidants. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Screw-Out Deck Plate - Black - 4" 

Sea-Dog® Screw-Out Deck Plates are molded to the highest standards using top quality UV stabilizers and antioxidants. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Screw-Out Deck Plate - White - 4" 

Sea-Dog® Screw-Out Deck Plates are molded to the highest standards using top quality UV stabilizers and antioxidants. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Deck Plate - 3" 

Use with Sea-Dog® Deck Plate Keys 335680 or 335699 (not included). Use anti-seize lubricant to protect threads from galling.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Pop-Out Textured Deck Plate - White - 8"

The Sea-Dog® Pop-Out Deck Plate is constructed of UV stabilized molded ABS and polycarbonate for its structural strength, as well as weather and corrosion resistance. The integrated, pop-up lever makes opening and closing a snap; no tools required. Rubber O-ring provides a watertight fit. Patent Pending. Avoid contact with acetone or strong solvents.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Flip Top Deck Fill Lever Rebuild Kit 

Kit Contains:

• 1 Lever
• 1 Lever Spring
• 2 Pivot Pins
• 1 Cotter Pin
• 1 Cap Spring
• 1 Gasket/Washer

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Flip Top Deck Fill - Gas - 1-1/2" Hose 

Flip Top Hose Gas Fill is constructed of investment cast 316 stainless steel. Installs with four #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking. 

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Flip Top Deck Fill - Gas - 2" Hose 

Flip Top Hose Gas Fill is constructed of investment cast 316 stainless steel. Installs with four #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking. 

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LED Fold Down All Around Light for Pontoon Boat - 24"

LED Fold Down 360° All Around Pontoon Lights are approved for USCG 2 NM (Colreg 2 mile). Mounts on 1-1/4" square tubing. Constructed of injection molded nylon and aluminum. Installs with three #10 FH fasteners (not included). 12VDC. Low amp draw. 

All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LED Fold Down All Around Light for Pontoon Boat - 9" 

LED Fold Down 360° All Around Pontoon Lights are approved for USCG 2 NM (Colreg 2 mile). Mounts on 1-1/4" square tubing. Constructed of injection molded nylon and aluminum. Installs with three #10 FH fasteners (not included). 12VDC. Low amp draw. 

All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LED Masthead Light - 2 NM - 225° 

LED 225° Masthead Lights are fixed mounted and approved for USCG 2 NM (Colreg 2 mile). Constructed of UV stabilized injection molded polycarbonate. Installs with two #12 RH fasteners (not included). 12VDC. Low amp draw. 

All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

All Around Light 

360° All Around Lights are constructed of impact resistant injection molded polycarbonate and stamped 304 stainless steel. Installs with two #6 RH fasteners (not included). For replacement of existing lighting (not for new construction). 

All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LED Removable Telescopic All Around Light - 26" - 48" 

LED Removable Telescopic 360° All Around Lights are approved for USCG 2NM (Colreg 2 mile). Constructed of injection molded nylon and aluminum. 12VDC. Low amp draw. Installs with three #8 FH fasteners (not included). 

All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel All Around Light 

360° All Around Light is constructed of stamped 304 stainless steel. For replacement of existing lighting (not for new construction). Installs with three #4 RH fasteners (not included). 

All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Rectangular Transom Light 

Rectangular Transom Light is constructed of stamped 304 stainless steel. For replacement of existing lighting (not for new construction). Installs with two #10 FH fasteners (not included). 

All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Round Transom Light 

Round Transom Light is constructed of stamped 304 stainless steel. For replacement of existing lighting (not for new construction). Installs with two #8 FH fasteners (not included). 

All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Stern Light 

135° Stern Light is constructed of stamped 304 stainless steel. For replacement of existing lighting (not for new construction). Installs with three #4 RH fasteners (not included). 

All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Masthead Light 

225° Masthead Light is constructed of stamped 304 stainless steel. For replacement of existing lighting (not for new construction). Installs with three #4 RH fasteners (not included). 

All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Fold Down All Around Light - 26" 

Fold Down 360° All Around Lights folds down easily for storage and comes with a white translucent lens. For replacement of existing lighting (not for new construction). Constructed of injection molded nylon and aluminum. Installs with four #10 FH fasteners (not included). 12VDC. 

All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Side Mount LED Navigation Lights - 2 NM - Port & Starboard 

LED Side Mount Side Lights 400079 are approved for USCG 2 NM (Colreg 2 mile). Constructed of corrosion resistant stamped 304 stainless steel. One pair includes port and starboard lights. Surface mounts vertically with two #8 FH fasteners (not included). 12VDC. Low amp draw. 

All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Black Side Mount LED Navigation Lights - 1 NM - Port & Starboard 

LED Side Mount Lights 400078 are approved for USCG 1 NM (Colreg 1 mile). Constructed of injection molded ABS. One pair includes port and starboard lights. Surface mounts vertically with two #8 FH fasteners (not included). 12VDC. Low amp draw. 

All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Black LED Navigation Lights - Port & Starboard 

LED Side Mount Navigation Lights are approved for USCG 2 NM (Colreg 2 mile). One pair includes port and starboard lights. 400072 is constructed of injection molded ABS. Installs with two #8 FH fasteners (not included). 

All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

White LED Navigation Lights - Port & Starboard 

LED Side Mount Navigation Lights are approved for USCG 2 NM (Colreg 2 mile). One pair includes port and starboard lights. 400071 is constructed of injection molded ABS. Installs with two #8 FH fasteners (not included). 

All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel LED Navigation Lights - Port & Starboard 

LED Side Mount Navigation Lights are approved for USCG 2 NM (Colreg 2 mile). One pair includes port and starboard lights. 400070 is constructed of stamped 304 stainless steel. Installs with two #8 FH fasteners (not included). 

All USCG-approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. For more information, please refer to USCG regulations for 1 NM and 2 NM navigation lights.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Flush Mount LED Side Lights 

LED Flush Mount Side Lights are approved for USCG 1 NM (Colreg 1 mile). Direct replacement for the 400180. One pair includes port and starboard lights. Constructed of stamped 304 stainless steel. Installs with four #8 RH fasteners (not included). 12V. All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Flush Mount Side Lights 

Flush Mount Side Lights are constructed of stamped 304 stainless steel. One pair includes port and starboard lights. For replacement of existing lighting (not for new construction). Installs with four #8 RH fasteners (not included). Approved for USCG 1 NM (A-16). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Aurora Stainless Steel LED Pop-Up Table Light - 3W with Touch Dimmer Switch

Aurora LED Pop-Up Table Light automatically switches on with a simple twist of the cap, allowing the light to pop-up, ready to use. Push the cap down, twist to lock, and the light switches off and disappears into the table or deck. Can be used with LED Touch Dimmer Switch (403061-1). Constructed of corrosion resistant investment cast 316 stainless steel cap and bezel. Installs with #10 FH fasteners (included). Produces 500 lumens. 12-24V. IP67 waterproof rating. 

Features:

• Investment Cast 316 Stainless Steel/ABS

LED Touch Dimmer Switch

This LED Continuous Adjustment Dimmer without On/Off Function is designed to work with lights that are internally switched. Ideal for Aurora Pop-Up Light (404610-3). A center touch sensor activates the color-coded dimming levels. When off, the LED ring is orange; maximum bright, the ring is green; lowest light level, the ring is purple; and in between stages are shades of blue. Memory function turns the light back on at the same brightness level as when it was turned off. Constructed of corrosion resistant 304 stainless steel. 1.5A max. 12/24VDC. IP67 waterproof rating. 

Features:

• 304 Stainless Steel

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Round LED Flush Mount Courtesy Light - Blue

This LED Flush Mount Round Courtesy Light fits in a 1-1/8" diameter hole. The special lens design aims the light downward and the stainless steel cover focuses the light, preventing it from projecting upwards. 20 lumens. Low amperage draws 0.02 amps @ 12V.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Round LED Flush Mount Courtesy Light - White 

This LED Flush Mount Round Courtesy Light fits in a 1-1/8" diameter hole. The special lens design aims the light downward and the stainless steel cover focuses the light, preventing it from projecting upwards. Available in blue or white. 20 lumens. Low amperage draws 0.02 amps @ 12V.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LED Courtesy Light - White 

LED Courtesy Lights utilizes three bright LEDs that draw very low amperage and have a very long service life. Stamped 304 stainless steel face plate hides the mounting screws to give this light a sleek, modern look. 55 lumens. Low amperage draws 0.02 amps @ 12V. Installs with two #6 FH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LED Cabin/Reading Light 

This LED Cabin/Reading Light features an adjustable light angle for directed lighting. G4 LED 2W (warm white) bulb included. Prewired with integral on/off rocker switch. 150 lumens. Installs with four #6 FH fasteners (included). IP55 rating.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LED Cabin/Reading Light with Touch Dimmer 

LED Cabin/Reading Light with built-in, touch controlled on/dim/off switch. This light provides a direct beam reading light, as well as ambient light for the cabin. High quality aluminum construction with an adjustable light angle and a warm white, 3000K Cree bulb providing 270 lumens @ 2W. Works with 12V and 24V systems. Includes two #6 FH fasteners and Allen wrench.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Brass Berth Light - Large 

This Berth Light is constructed of machined and stamped brass and a lacquer coating to prevent tarnish with solid brass knurled adjusting knobs. The interior surface of the lamp shade is white enamel to reflect more light. Prewired with integral on/off switch. Includes a 15-watt DC double contact bayonet style bulb. Can be converted to LED with bayonet bulb socket adapter (442042-1) BA150 style base and G4 bulb (sold separately). Designed for bulkhead or wall mounting. Installs with three #6 RH fasteners (not included). 12VDC.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Brass Berth Light - Small 

This Birth Light is constructed of machined and stamped brass and a lacquer coating to prevent tarnish with solid brass knurled adjusting knobs. The interior surface of the lamp shade is white enamel to reflect more light. Prewired with integral on/off switch. Includes a 15-watt DC double contact bayonet style bulb. Can be converted to LED with bayonet bulb socket adapter (442042-1) BA150 style base and G4 bulb (sold separately). Designed for bulkhead or wall mounting. Installs with three #6 RH fasteners (not included). 12VDC.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Brass LED Day/Night Dome Light - 5" Lens 

These LED Day/Night Dome Lights are constructed of stamped polished brass and are lacquer coated to prevent tarnish. Prewired with integral on/off/on toggle switch and two separate light circuits. One circuit uses a clear bulb and the other circuit uses a red night vision bulb. With the low current consumption of 0.068 amps @ 12 volts, they give off very little heat and feature an extremely long service life. These vibration resistant LED Dome Lights feature 18 white and 12 red LEDs per light. Surface mounts with three #6 RH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel LED Day/Night Dome Light - 5" Lens 

These LED Day/Night Dome Lights are constructed of corrosion resistant stamped 304 stainless steel. Prewired with integral on/off/on toggle switch and two separate light circuits. One circuit uses a clear bulb and the other circuit uses a red night vision bulb. With the low current consumption of 0.068 amps @ 12 volts, they give off very little heat and have extremely long service life. These vibration resistant LED Dome Lights feature 15 white and 5 red LEDs per light. Surface mounts with three #6 RH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Brass LED Dome Light - 5" Lens 

These LED dome lights are constructed of stamped polished brass and are lacquer coated to prevent tarnish. Prewired with integral on/off toggle switch. With the low current consumption of 0.068 amps @ 12 volts, they give off very little heat and have extremely long service life. These vibration resistant LED Dome Lights feature 18 white LEDs per light. Surface mounts with three RH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel LED Dome Light - 5" Lens 

LED Dome Lights are constructed of corrosion resistant stamped 304 stainless steel. Prewired with integral on/off toggle switch. With the low current consumption of 0.068 amps @ 12 volts, they give off very little heat and have extremely long service life. These vibration resistant LED Dome Lights feature 18 white LEDs per light. Surface mounts with three RH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Dome Light - 5" Lens 

These Dome Lights are constructed of corrosion resistant stamped 304 stainless steel. Prewired with an integral on/off toggle switch and an 18.4 watt DC double contact bayonet bulb. Can be converted to LED with a bayonet bulb socket adapter (442042-1) BA15D style base and G4 bulb (sold separately). Surface mounts with three RH fasteners (not included). 12VDC.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Brass LED Dome Light - 4" Lens 

These LED dome lights are constructed of stamped polished brass and are lacquer coated to prevent tarnish. Prewired with integral on/off toggle switch. With the low current consumption of 0.068 amps @ 12 volts, they give off very little heat and have extremely long service life. These vibration resistant LED Dome Lights feature 18 white LEDs per light. Surface mounts with three RH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel LED Dome Light - 4" Lens 

LED Dome Lights are constructed of corrosion resistant stamped 304 stainless steel. Prewired with integral on/off toggle switch. With the low current consumption of 0.068 amps @ 12 volts, they give off very little heat and have extremely long service life. These vibration resistant LED Dome Lights feature 18 white LEDs per light. Surface mounts with three RH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Deluxe LED Courtesy Light - Front Facing - White

Large Deluxe LED Courtesy Lights are constructed of a lightweight plastic body and an investment cast 316 stainless steel cover for a modern, streamlined profile. Available with outward directed light or downward directed light. These lights feature 3 low amperage, long life blue or white LEDs with a 20 lumen output. Installs with two #6 FH fasteners (not included). 9–28VDC. IP67 waterproof rating.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Deluxe LED Courtesy Light - Down Facing - Blue

Large Deluxe LED Courtesy Lights are constructed of a lightweight plastic body and an investment cast 316 stainless steel cover for a modern, streamlined profile. Available with outward directed light or downward directed light. These lights feature 3 low amperage, long life blue LEDs with a 20 lumen output. Installs with two #6 FH fasteners (not included). 9–28VDC. IP67 waterproof rating.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Deluxe LED Courtesy Light - Down Facing - White 

Large Deluxe LED Courtesy Lights are constructed of a lightweight plastic body and an investment cast 316 stainless steel cover for a modern, streamlined profile. Available with outward directed light or downward directed light. These lights feature 3 low amperage, long life white LEDs with a 20 lumen output. Installs with two #6 FH fasteners (not included). 9–28VDC. IP67 waterproof rating.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LED Square Courtesy Light - Blue

LED Square Courtesy Lights are recess mounted in a 1" diameter hole, requiring no installation fasteners. Constructed of investment cast 316 stainless steel. This high quality 1-3/8” square light with two LED bulbs can be mounted to cast light up and down or side to side, depending on the required application. 12V.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LED Square Courtesy Light - White 

LED Square Courtesy Lights are recess mounted in a 1" diameter hole, requiring no installation fasteners. Constructed of investment cast 316 stainless steel. This high quality 1-3/8” square light with two LED bulbs can be mounted to cast light up and down or side to side, depending on the required application. 12V.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LED Alcor Courtesy Light - Blue

LED Alcor Courtesy Lights are recess mounted in a 1" diameter hole, requiring no installation fasteners. Constructed of investment cast 316 stainless steel. This high quality 1-1/2” diameter round light with one LED bulb can be mounted to cast light down, up, or to the side, depending on the required application. Available in blue or white. 12V.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LED Alcor Courtesy Light - White 

LED Alcor Courtesy Lights are recess mounted in a 1" diameter hole, requiring no installation fasteners. Constructed of investment cast 316 stainless steel. This high quality 1-1/2” diameter round light with one LED bulb can be mounted to cast light down, up, or to the side, depending on the required application. Available in blue or white. 12V.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LED Utility Light White with Black Faceplate 

These LED Utility Lights are constructed of injection molded Delrin for strength, heat resistance, and dimensional stability. Comes standard with low amp draw white LED bulbs. Surface mounts with four #6 FH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LED Utility Light White with White Faceplate 

These LED Utility Lights are constructed of injection molded Delrin for strength, heat resistance, and dimensional stability. Comes standard with low amp draw white LED bulbs. Surface mounts with four #6 FH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LED Rectangular Flood Light - 1500 Lumens

This marine grade LED Flood Light is constructed with a power coated aluminum housing with a stamped 304 stainless steel bracket. 6 super bright LEDs produce 1500 lumens. Low amp draw. 9-36V. IP67 waterproof rating.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Halogen Flood Light - 55W/12V - 6"

This marine grade Halogen Flood Light features a fiberglass reinforced injection molded housing for strength and UV resistance, a solid glass lens, and a corrosion resistant stamped 304 stainless steel mounting bracket. H3 style 12V 55W halogen bulb.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Halogen Flood Light - 55W/12V - 7"

This marine grade Halogen Flood Light features a fiberglass reinforced injection molded housing for strength and UV resistance, a solid glass lens, and a corrosion resistant stamped 304 stainless steel mounting bracket. H3 style 12V 55W halogen bulb.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel LED (CREE) Docking Lights 

These Docking Lights are constructed of corrosion resistant stamped 304 stainless steel. Features two high power Cree LEDs providing 1300 lux light output from the front array, with a focused beam angle of 10° for a concentrated light beam. Eight regular LEDs on the top array have a wide-angle beam of 90° to illuminate a large portion of the dock area. Front lights and top lights can be controlled separately. Their small footprint makes for easy installation. Surface mounted with two #8 RH fasteners (not included). 300 lumens. Low amp draw of 0.28 @ 12VDC. IP68 waterproof rating.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel LED Docking Lights 

LED Docking Lights feature a sleek, contemporary design. Constructed of stamped 304 stainless for corrosion resistance. 32 super bright LEDs produce 180 lumens for excellent vision when docking. Surface mounted with two #8 RH fasteners (not included). Low amp draw of 0.28A @ 12V.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

7 Key Kill Switch Universal Lanyard 

This marine emergency cut-off 7 Key Universal Kill Switch with Lanyard attaches to your life vest while operating a boat or personal watercraft. Designed to instantly cut battery power when detached. Constructed of injection molded nylon and Delrin. The 7 key 50” lanyard fits OMC, Johnson, Evinrude, Mercury, Mariner, Force, Yamaha, Honda, Tohatsu, Suzuki, and Nissan kill switches.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

10 Key Kill Switch Universal Lanyard 

This marine emergency cut-off 10 Key Universal Kill Switch with Lanyard attaches to your life vest while operating a boat or personal watercraft. Designed to instantly cut battery power when detached. Constructed of injection molded nylon and Delrin. The 10 key 50” lanyard fits Johnson, Evinrude, Mercury, Yamaha, Honda, Tohatsu, Suzuki, Kawasaki, OMC, and Nissan kill switches.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Universal Kill Switch with Floating Lanyard 

This marine emergency cut-off Unversal Kill Switch with Floating Lanyard attaches to your life vest while operating a boat or personal watercraft. Designed to instantly cut battery power when detached. Dual circuitry allows kill switch to be wired for either ignition kill or magneto kill depending on the application. The housing is constructed of weatherproof injection molded nylon and Delrin with 0.250" brass terminals. The switch includes a floating lanyard approximately 15" when coiled and 48" when stretched, which should be replaced if worn, cut, or frayed. Mounting hole is 5/8" in diameter. Maximum panel thickness: 3/8". Maximum 5A draw. WARNING: Switch should be tested for proper function before each use.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LED Touch Dimmer Switch for Aurora Pop-Up Table Lamp

This LED Continuous Adjustment Dimmer without On/Off Function is designed to work with lights that are internally switched. Ideal for Aurora Pop-Up Light (404610-3). A center touch sensor activates the color-coded dimming levels. When off, the LED ring is orange; maximum bright, the ring is green; lowest light level, the ring is purple; and in between stages are shades of blue. Memory function turns the light back on at the same brightness level as when it was turned off. Constructed of corrosion resistant 304 stainless steel. 1.5A max. 12/24VDC. IP67 waterproof rating. 

Features:

• 304 Stainless Steel

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Brass 3-Position Key Ignition Switch

Three Position Ignition Switch is constructed of stamped brass. For off, ignition, and start functions. 13/16" diameter long shaft. Maximum panel thickness: 1-1/8”. Three screw terminal electrical connection. Ignition: 15A @ 12VDC. Solenoid: 30A @ 12VDC. Includes two keys. Available with or without rubber boot.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Dimmer f/LED Lights w/On-Off Feature 

LED Continuous Adjustment Dimmer Switch is constructed of 304 stainless steel and features easy-to-use color coded dimming levels. When off, the LED ring is orange; maximum bright, the ring is green; lowest light level, the ring is purple; and in between stages are shades of blue. A short press turns the light on and off, then a longer press activates the dimming/brightening function. Memory function turns the light back on at the same brightness level as when it was turned off. 1.5A max. 12VDC. IP67 waterproof rating.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Double Gang Wall Switch - Stainless Steel 

Wall Switch Panels are constructed with a stamped 304 stainless steel switch plate and two black SPDT switches rated @ 15 amps each. Installs with two #6 RH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Single Gang Wall Switch - Stainless Steel 

Wall Switch Panels are constructed with a stamped 304 stainless steel switch plate and one SPDT switch is rated @ 15 amps. Installs with two #6 RH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Splash Guard Switch Panel Vertical - 6 Switch

The Splash Guard Vertical 4-Gang Rocker Switch Panel features six 15A 12VDC illuminated SPST On/Off rocker switches and six fuse holders for use with standard AGC 1/4” x 1-1/4” glass style fuses. Individual circuit 10A max. 37A total. The addition of splash guard switch covers make this panel ideal for use where the front might be subject to light spray or water (NOT designed for total immersion). These fire resistant panels are suitable for use in engine room compartments. Includes a mounting gasket and a sheet of 20 preprinted decals to customize to your specific application. Constructed of injection molded nylon. Installs with six #6 RH fasteners (not included). CE compliant. 12VDC.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Round OLED DC Amp Meter - 0 Amp-100 Amp

OLED (Organic LED) 100 Amp Meter is designed to withstand constant vibration and the rigors of a wet marine or dusty outback environment. Monitors amperage on a bright, waterproof, daylight readable OLED screen. High contrast and resolution make this screen visible from a wide viewing angle, even with polarized sunglasses. Reverse polarity protected. Same compact round size as a standard 12V receptacle, this OLED 100 Amp Meter provides many installation options. Injection molded nylon construction. Includes 100A/50mV shunt. IP66 rating.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Round OLED Temperature Meter Fahrenheit with 6’ Lead

OLED (Organic LED) Temperature Meter is designed to withstand constant vibration and the rigors of a wet marine or dusty outback environment. Monitors temperature on a bright, waterproof, daylight readable OLED screen. High contrast and resolution make this screen visible from a wide viewing angle, even with polarized sunglasses. Reverse polarity protected. Same compact round size as a standard 12V receptacle, this OLED Temperature Meter provides many installation options. Injection molded nylon construction. Includes a prewired temperature sensor with a 6’ cable. IP66 rating.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Round Voltage & Amp Meter - 6V-30V & 0 Amp - 10 Amp Meter

Round Digital Volt/Amp Meter is the same compact round size as a standard 12V receptacle and supports many installation options. Injection molded nylon construction. Red LED display. Input 4-30VDC. DC shunt not required. IP65 rating.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Round Voltage Meter DC - 5V-15V with Rainbow Dial

The rainbow dial digital voltmeter gives the user quick visual color-coded voltage information. Red/yellow for low voltage. Green for normal voltage. The compact round size allows for installation in a wide variety of locations. For use with 12V systems. IP65 rating. Injection molded nylon.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Round Voltage Meter - 6V-30V

Compact size allows for installation in a variety of locations - the same round size as a standard 12V receptacle. For interior or fully protected locations only. 

Specifications:

• Type: Round Digital Voltage Meter
• 4V-30V DC

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Splash Guard Switch Panel Vertical - 4 Switch

The Splash Guard Vertical 4-Gang Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four fuse holders for use with standard AGC 1/4” x 1-1/4” glass style fuses. Individual circuit 10A max. 37A total. The addition of splash guard switch covers make this panel ideal for use where the front might be subject to light spray or water (NOT designed for total immersion). These fire resistant panels are suitable for use in engine room compartments. Includes a mounting gasket and a sheet of 20 preprinted decals to customize to your specific application. Constructed of injection molded nylon. Installs with four #6 RH fasteners (not included). CE compliant. 12VDC.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Splash Guard Bilge Pump Panel with Circuit

The Splash Guard Bilge Pump Panel features a splash guard switch cover making this panel ideal for applications where the front might be subjected to light spray or water (NOT designed for total water immersion). This deluxe version features a three-way switch allowing both automatic and manual switching of the bilge pump. When operated in Manual mode, a red LED light is activated. When in Automatic mode, a green LED light is activated. The panel is designed so the words “Bilge Pump" will illuminate when back lit, allowing for easy location and operation at night. UL listed 20A circuit breaker included. Additional breaker sizes available (420805-420830). Constructed of injection molded ABS for maximum durability and corrosion resistance. Installs with four #6 RH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Nylon Switch Panel - Water Resistant - 5 Toggles with Power Socket

The Water Resistant Toggle Switch Panel features five 15A 12VDC toggle switches, a 12VDC power socket, inline fuse holders, and a decal sheet. Constructed of injection molded ABS. Installs with four #6 RH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Nylon Circuit Breaker Panel - 5 Circuit - Wave Style

The Wave Rocker Switch Breaker Panel features five ignition protected, illuminating SPST On/Off rocker switches and five thermal resettable breakers (two 3A, two 5A, one 8A, and one 10A). Individual circuit 10A max. 30A total. Includes a sheet of 20 preprinted decals to customize to your specific application. Label decals are back lit with green LEDs. Constructed of injection molded nylon. Installs with six fasteners (not included). 12VDC.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Splash Guard Circuit Breaker Panel - 6 Circuit

The Splash Guard Vertical 6-Gang Breaker Rocker Switch Panel features six 15A 12VDC illuminating SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Additional sizes available (420805-420810). Individual circuit 10A max. 37A total. The addition of splash guard switch covers make this panel ideal for use where thel front might be subject to light spray or water (NOT designed for total immersion). These fire resistant panels are suitable for use in engine room compartments. Includes a mounting gasket and a sheet of 20 preprinted decals to customize to your specific application. Constructed of injection molded nylon. Installs with six #6 RH fasteners (not included). 12VDC.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Aluminum Circuit Breaker Panel - 6 Circuit

Aluminum Breaker Panel features six 15A 12VDC illuminated SPST On/Off rocker switches and six thermal AC/DC circuit breakers (two 3A, two 6A, one 8A, and one 10A). Individual circuit 10A max. 40A total. 12VDC. Includes a sheet of 20 preprinted decals to customize to your specific applications. Constructed of stamped anodized aluminum. Installs with six #6 RH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Aluminum Switch Panel - Vertical - 4 Switch

Aluminum Vertical Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. 12VDC. Includes a sheet of 20 preprinted decals to customize to your specific applications. Constructed of stamped anodized aluminum. Installs with four #6 RH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Aluminum Switch Panel Vertical - 6 Switch

Aluminum Vertical Rocker Switch Panel features six 15A 12VDC illuminated SPST On/Off rocker switches and six 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. 12VDC. Includes a sheet of 20 preprinted decals to customize to your specific applications. Constructed of stamped anodized aluminum. Installs with six #6 RH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Water Resistant Toggle Switch Panel 

Water Resistant Toggle Switch Panel is constructed of injection molded ABS and polycarbonate. Features six 15A 12VDC toggle switches with blue LED indicator lights, ATC fuse holders, and decal sheet. Rated IP66.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Water Resistant Toggle Switch Panel with LED Power Socket - 5 Toggle

Water Resistant Toggle Switch Panel is constructed of injection molded ABS and polycarbonate. Features five 15A 12VDC toggle switches with blue LED indicator lights, blue LED lighted power socket, ATC fuse holders, and decal sheet. Rated IP66.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Water Resistant Toggle Switch Panel with LED Power Socket - 3 Toggle 

Water Resistant Toggle Switch Panel is constructed of injection molded ABS and polycarbonate. Features three 15A 12VDC toggle switches with blue LED indicator lights, blue LED lighted power socket, ATC fuse holders, and decal sheet. Rated IP66.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Water Resistant Toggle Switch Panel with USB Power Socket - 5 Toggle 

Water Resistant Toggle Switch Panel is constructed of injection molded ABS and polycarbonate. Features five 15A 12VDC toggle switches with blue LED indicator lights, blue LED lighted double USB power socket, ATC fuse holders, and decal sheet. USB power socket output is 4.8A, 2.4A per side. Rated IP66.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Battery Terminal Wing Nut Style - Positive/Negative Set 

Wing Nut Style Battery Terminals convert battery posts to stud connectors and permit quick disconnection from the battery. Polarity specific to meet USCG regulations. Die cast lead construction.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Battery Terminal Covers - Red/Black - 5/8" 

These Battery Terminal Covers are designed to insulate integral marine wing nut terminals protecting battery cables from corrosion and shorting. Constructed of injection molded PVC. These covers satisfy USCG and ABYC requirements for the prevention of accidental grounding of battery terminals. Color coded to avoid polarity misidentification. Will fit most marine batteries as well as automotive batteries using add on marine terminals.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Battery Terminal Covers - Red/Back - 1/2" 

These Battery Terminal Covers are designed to insulate integral marine wing nut terminals protecting battery cables from corrosion and shorting. Constructed of injection molded PVC. These covers satisfy USCG and ABYC requirements for the prevention of accidental grounding of battery terminals. Color coded to avoid polarity misidentification. Will fit most marine batteries as well as automotive batteries using add on marine terminals.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Battery Box Strap & Brackets - 54" 

Battery Box Strap & Brackets includes a woven polypropylene strap, injection molded nylon buckle, two brackets, and four #8 FH fasteners.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Battery Box Strap & Brackets - 38" 

Battery Box Strap & Brackets includes a woven polypropylene strap, injection molded nylon buckle, two brackets, and four #8 FH fasteners.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Heavy Duty Battery Box Strap - 48" 

Heavy Duty Battery Box Strap includes a woven polypropylene strap, stainless steel buckle, two chrome plated brass brackets, and four #8 FH fasteners.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Battery Tray with Clamp for 27 Series Batteries 

Heavy duty Battery Tray for size #27 batteries. Includes screw down clamp and four 1/4"x1" PH screws with washers. Injection molded polypropylene construction.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Battery Tray with Clamp for 24 Series Batteries 

Heavy duty Battery Tray for size #24 batteries. Includes screw down clamp and four 1/4"x1" PH screws with washers. Injection molded polypropylene construction.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Battery Tray with Straps for 27 Series Batteries 

Heavy duty Battery Tray with Strap for size #27 batteries. Includes hold down strap with a quick release buckle and four 1/4"x1" PH screws with washers. Injection molded polypropylene construction.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Battery Tray with Straps for 24 Series Batteries 

Heavy duty Battery Tray with Strap for size #24 batteries. Includes hold down strap with a quick release buckle and four 1/4"x1" PH screws with washers. Injection molded polypropylene construction.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

USB Map Light 

Add light anywhere a USB port is present. This USB map light features 10 bright LEDs and a flexible 7” gooseneck that can rotate 360° illuminating any dark corner. A three function touch switch provides a full 10 bulb brightness mode as well as a 5 bulb half bright mode. Light head is detachable for easy storage.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Dual USB Rocker Switch Style Voltmeter with Hidden Display 

This Dual USB Rocker Switch Style Voltmeter fits into any standard 13/16” X 1-7/16” hole. Allows two devices to be charged simultaneously while also displaying the batteries output. The total output 4.8A load is split 2.4A per side. Enough power to charge phones, pads, and tablets quickly and efficiently. Input 12-24VDC. Output DC 5V/4.8A. Red LED display. IP65 rating.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Dual USB Rocker Switch Style Power Socket 

This USB rocker switch power socket charges two devices simultaneously. Fits into any 13/16” X 1-7/16” rocker switch hole. Input 12–24VDC. Total output DC 5V/4.8A with the load being split between the two sides as needed. Enough power to charge iPhones, iPads and most other devices. Blue LED illumination. Protective dust cap extends the life of the charger. IP65 rating.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Dual USB Socket/Voltmeter with Hidden Display

This Dual USB Socket allows for two devices to be charged simultaneously while also displaying the batteries output. The total output 4.8A load is split 2.4A per side as needed. Enough power to charge phones, pads, and tablets quickly and efficiently. Also fits Sea-Dog® Power Socket Shell 426100. Output DC 5V/4.8A. Input 12-24VDC. Red LED display. IP65 rating.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Dual USB Power Socket 

This USB power socket charges two devices simultaneously. Input 12V–24V. Total output DC 5V/4.8A with the load being split between the two sides as needed. Enough power to charge iPhones, iPads and most other devices. Blue LED illumination. Protective dust cap extends the life of the charger. Fits Sea-Dog® Line standard 1-1/8” Power Socket Shell 426100. IP65 rating.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Dual USB Power Plug with Voltage/Amp Meter 

LCD screen displays charging status in amps, battery voltage, and low voltage audio alarm. Stamped stainless steel and injection molded nylon construction this USB power plug adapter charges two devices simultaneously. Input 12-24V, Single output DC 5V/2.4A. Total output is a 4.8A with the load being split between the two sides as needed. Enough power to charge iPhones, iPads and most other devices. Can be used on a boat, car, or RV. This portable version fits all Sea-Dog® Power Sockets and any standard 12V receptacle.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Double USB & Power Socket Panel 

This injection molded nylon power socket panel accommodates both USB connectors as well as standard power sockets. The dual USB power socket charges two devices simultaneously. Input 12V–24VDC. Single output DC 5V/2.4A. Total output is 4.8A with the load being split between the two sides as needed. Enough power to charge iPhones, iPads and most other devices. The power socket is rated at a maximum of 12V/16A. Protective dust caps extend the life of the charger. Includes mounting screws and electrical connectors.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Double USB & Power Socket Panel with Breaker Switch 

This injection molded nylon power socket panel accommodates both USB connectors as well as standard power sockets. The dual USB power socket charges two devices simultaneously. Input 12V–24V. Single output DC 5V/2.4A. Total output is 4.8A with the load being split between the two sides as needed. Enough power to charge iPhones, iPads and most other devices. The power socket is rated at a maximum of 12V/16A. Protective dust caps extend the life of the charger. Includes mounting screws and electrical connectors. Includes 16A breaker switch.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Boat Hook Mooring Cover Support Plate Crown & Webbing Straps

Combine a Sea-Dog Boat Hook with the Support Crown and mooring cover support crown straps (#491115-1) for the perfect solution to nature’s pooling pressures.

Boat Hook Mooring Cover Support Plate Crown

Features:

• Fits the tip of an adjustable boat hook (or any universal threaded device) to support a mooring cover or canvas top
• Helps eliminate pooling from rain, sleet or snow
• UV resistant injection molded nylon construction

Webbing Straps

These Mooring Cover Support Crown Webbing Straps are used for positioning the Mooring Cover Support Crown (491110-1) securely in place. Includes three 15’ straps, with a securing loop on one end and an adjustable snap clip on the other. They are designed to set once and then simply clip in and out later for ease of use.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Galvanized Winch Cable - 3/16" x 20’ 

Utility Snap, 155822 is rated at a 5,000 lb. breaking strength.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Trailer Connector 4 Pole Kit 

Trailer plug kit (male & female) 12" & 48"

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

7 to 4 Trailer Plug Adapter

Sea-Dog’s 7 to 4 Adapter for Trailer Plugs.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

7 To 5 Trailer Plug Adapter 

Injection molded PVC

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Zinc Plated Safety Chain 

Use this chain between your trailer and vehicle as an added layer of security to prevent separation if trailer inadvertently comes off trailer ball. Secures with S-hooks on both ends. Zinc plated steel construction.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Zinc Plated Steel Receiver Pin with Clip 

The corrosion resistant zinc plated steel receiver pin ensures your ball mount or other hitch-mounted accessories stays securely engaged to your trailer hitch. Hitch pin clip included.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Brass Plated Coupler Lock - 2 Piece 

Designed for theft deterrence, coupler locks also provide an additional level of security to prevent accidental uncoupling while in transit to better protect your trailer. Corrosion resistant brass plated zinc construction. Two-piece design for better access in hard to reach places. Fits most coupler sizes. Includes two keys.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Galvanized Coupler Lock Pin - 5/16" 

Square coupler pins add an additional level of security preventing accidental uncoupling while in transit to better protect your trailer. Electrogalvanized steel construction for corrosion resistance. The snap lock bale is spring tensioned for stronger holding power. Fits most coupler sizes.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Galvanized Coupler Lock Pin - 1/4" 

Square coupler pins add an additional level of security preventing accidental uncoupling while in transit to better protect your trailer. Electrogalvanized steel construction for corrosion resistance. The snap lock bale is spring tensioned for stronger holding power. Fits most coupler sizes.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Impeller Puller - Large

Investment Cast 316 Stainless Steel.

Dimensions:

• Width: 3-3/4"
• Height: 6-3/4"
• Thread: 7/16" 

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Impeller Puller - Small

Allows easier removal of flexible impellers from a pump. Tighten the side grips onto the impeller hub and turn the center screw shaft to pull the impeller out of the pump. Available in 2 sizes.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Add-A-Snap - White - 4" 

For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Bottle Opener with Brushed Finish 

Corrosion resistant investment cast 316 stainless steel bottle opener wall mounts with two #6 FH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Add-A-Snap - Black - 4" 

For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Add-A-Snap - Black - 2-1/2" 

For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Add-A-Snap - White - 1-1/2" 

For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Add-A-Snap - Black - 1-1/2" 

For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Canvas Snap Tool 

Canvas Snap Tool includes a die wrench and three removable dies for various snap caps and studs. Great addition to any tool box. Aluminum/steel construction. Not for use with heavy duty stainless canvas snaps.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Motor Flush Ear Muff 

Outboard motor flushers quickly flush away salt, sand, minerals and contaminates from your lower unit cooling system extending the engine’s service life. Easy to use molded PVC cups deliver fresh water to flush the cooling system through side intakes on the lower unit. Simple garden hose connection, no tools required. Great for winterizing, tune-ups and other maintenance that requires running an outboard engine out of the water.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Steering Cable Boot 

Durable molded rubber boot protects the output end of all standard steering cables keeping dirt, debris and moisture out extending the service life of the cable. Includes two cable tie style clamps.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SS Maneuvering Knob with Black Nylon Insert 

Sea-Dog® Steering Wheel Maneuvering Knob fits our Sea-Dog® Steering Wheels (230111, 230212, 230115, 230211, 230215, 230313, and 230315). Designed for 1" x 3/4" oval tubing. Direct replacement for 230323 and 230325.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SS Steering Wheel Maneuvering Knob 

Sea-Dog® Steering Wheel Maneuvering Knob fits our Sea-Dog® Steering Wheels (230111, 230212, 230115, 230211, 230215, 230313, and 230315). A steering knob attaches to the wheel for use in situations where maneuvering is excessive. It allows the driver to turn the steering wheel more quickly. Constructed of investment cast stainless steel for corrosion resistance this knob is designed for use with 1" x 3/4" oval tubing.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Rod Storage Rack - 5 Rod 

Constructed of injection molded polypropylene. These Rod Storage Racks feature soft foam inserts securing rods and reducing potential damage from rough seas. Installs with four #8 FH fasteners (not included). 

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Storage Rack - 3 Rod 

Constructed of injection molded polypropylene. These Rod Storage Racks feature soft foam inserts securing rods and reducing potential damage from rough seas. Installs with four #8 FH fasteners (not included). 

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Flush Mount Rod Holder - 30° 

Flush Mount Rod Holders are constructed of corrosion resistant investment cast 316 stainless steel. Features a 30° angle. Accommodates rods up to 1-1/2”. Installs with three #12 FH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Cast Steel Flush Mount Rod Holder with Cap - 30° 

The unique design of the cast stainless mounting flange allows the use of a gasket to reduce leakage that is common on other cast rod holders. This Flush Mount Rod Holder with Cap is constructed of corrosion resistant investment cast 316 stainless steel with a UV resistant PVC cap and full length PE liner. Features a 30° angle. Accommodates rods up to 1-1/2”. Installs with three #12 FH fasteners (not included). 

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Flush Mount Rod Holder with Cap - 90° 

A high quality, vertical mount rod holder! These 90° Flush Mount Rod Holders are constructed of investment cast 316 stainless steel with a plastic liner, integral cap, and mounting gasket. Features a 90° angle. Accommodates rods up to 1-1/2". Installs with three #12 FH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Mounting Plate for 325190 Rod Holder 

Mounting Plate only for the 325190 30° removable rod holder.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Side Mount Removable Rod Holder 

Side Mount Rod Holder slides in and out of mounting plate for a lower profile while not in use. Constructed of formed 316 stainless steel with mounting plate. Features a 30° angle. Accommodates rods up to 1-13/16”. Installs with four #10 FH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Flush Mount Rod Holder with Cap - 30° 

Flush Mount Rod Holder with Cap is constructed of corrosion resistant formed 316 stainless steel with a UV resistant PVC cap and full length PE liner. Features a 30° angle. Accommodates rods up to 1-1/2”. Installs with three #12 FH fasteners (not included). 

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel 90° Flush Mount Rod Holder 

A value priced, vertical mount rod holder! This Economy 90° Flush Mount Rod Holder with Cap is constructed of formed 304 stainless steel with a plastic liner, mounting gasket, and integral cap. Features a 90° angle. Accommodates rods up to 1-1/2”. Installs with three #12 FH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Flush Mount Rod Holder with Stainless Top 

The look you want at an economical price! This Flush Mount Rod Holder with Stainless Top is constructed of UV resistant injection molded ABS with a stainless steel top cap. Features a 30° angle. Accommodates rods up to 1-5/8”. Installs with three #12 FH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Flush Mount Rod Holder - White

Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle. Accommodates rods up to 1-5/8”. Installs with three #12 FH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Flush Mount Rod Holder - Black 

Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle. Accommodates rods up to 1-5/8”. Installs with three #12 FH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Side Mount Rod Holder 

Side Mount Rod Holders and mounting brackets are constructed of formed 316 stainless steel with plastic end cap. Accommodates rods up to 1-5/8” in diameter. Installs with four #8 RH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Side Mount Rod Holder - 9" - White

Side Mount Rod Holders are constructed of injection molded polypropylene with 304 stainless steel mounting brackets. Accommodates rods up to 1-3/4” in diameter. Installs with four #8 RH fasteners (not included). 

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Side Mount Rod Holder - 9" - Black 

Side Mount Rod Holders are constructed of injection molded polypropylene with 304 stainless steel mounting brackets. Accommodates rods up to 1-3/4” in diameter. Installs with four #8 RH fasteners (not included). 

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Side Mount Rod Holder - Grey 

Constructed of injection molded polypropylene. These Side Mount Rod Holders have an integral, molded-in standoff located on the back of the rod holder, allowing direct mounting to any flat surface. Accommodates rods up to 1-3/4” in diameter. Installs with two #10 RH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Side Mount Rod Holder - White 

Constructed of injection molded polypropylene. These Side Mount Rod Holders have an integral, molded-in standoff located on the back of the rod holder, allowing direct mounting to any flat surface. Accommodates rods up to 1-3/4” in diameter. Installs with two #10 RH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Side Mount Rod Holder - Black 

Constructed of injection molded polypropylene. These Side Mount Rod Holders have an integral, molded-in standoff located on the back of the rod holder, allowing direct mounting to any flat surface. Accommodates rods up to 1-3/4” in diameter. Installs with two #10 RH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Narrow Gunnel Flush Mount Rod Holder - White 

These Narrow Gunnel Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle and designed for narrow gunnel applications while accommodating rods up to 1-5/8”. Installs with three #10 FH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Narrow Gunnel Flush Mount Rod Holder - Black 

These Narrow Gunnel Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle and designed for narrow gunnel applications while accommodating rods up to 1-5/8”. Installs with three #10 FH fasteners (not included).

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Track Rod Holder - 7" Tracks - 4 Rod Clips 

These Track Rod Holders are designed to hold fishing rods in the toughest conditions. Can be mounted vertically or horizontally in boats and homes. Includes two 7” pre-drilled aluminum tracks and four PVC clips. Mounting screws included.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Two Pole Side Mount Rod Storage Rack - Black

These Two Pole Side Mount Rod Holder are constructed from one-piece of injection molded UV stabilized polypropylene. No assembly required, easy installation. Built-in knife and lure holder. Accommodates rods up to 1-3/4” in diameter. 325028-1 and 325029-1 include four #8 stainless steel mounting screws.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Two Pole Side Mount Rod Storage Rack - White