The Seastar Autopilot pump is a fixed flow, reversible pump set that uses an internal hydraulic gear pump, producing very little vibration or noise. It is offered in two different pump sizes (type 1 & type 2).

AUTOPILOT ? KEY FEATURES

• Long life DC Motor (i.e. long life brushes)

• Compact design

• Simplified installation

• Low power consumption

• ABYC, CE?s and J1171 compliant

• Superior corrosion resistance

• Quiet operation

• All mounting bracket displacement included

The Seastar Autopilot pump is a fixed flow, reversible pump set that uses an internal hydraulic gear pump, producing very little vibration or noise. It is offered in two different pump sizes (type 1 & type 2).

AUTOPILOT ? KEY FEATURES

• Long life DC Motor (i.e. long life brushes)

• Compact design

• Simplified installation

• Low power consumption

• ABYC, CE?s and J1171 compliant

• Superior corrosion resistance

• Quiet operation

• All mounting bracket displacement included

Teleflex HA-1205 Stand Alone Autopilot SPA retrofit Kit

All SeasStar Power Assists manufactured during or after August 2007 are compatible with this pump retrofit kit. To determin if your SeaStar Power Assist is compatible inspect the valve block face. It must have 3 tapped holes. If you have an older system the autopilot must be added separately to the steerign system and will require additional hoses.

• 3 bolts
• 3 O-rings
• Loctite 242

Kit consists of following items:

Domtic Seastar HF6007 ORB Fitting Kit

• Tee Fitting, 1 End = -5 ORB, 1 end = 3/8 in tube, center = 3/8 in tube x 2
• Connector fitting, -5ORB - 3/8 in tube x 2
• Connector fitting, 1/4 in NPT - 3/8 in tube x 3
• Tube nut, 3/8 in dia. X 6
• Non-vented filler plug
• SeaStar nylon tube, 3/8 in dia. 25ft
• Elbow, 3/8 in tube (m) - -5 ORB x 2

Seastar PA1200-3 12vDC Power Assist Pump with 15ft Harness

• ORB Fittings
• Dramatically reduces steering effort in heavy or high torque applications
• Easy install. Wall or Floor mount
• OEM or retro-fit
• Simple add-o to an existing SeaStar steering system (from 1.4 to 2.4 SeaStar helms)
• Compatible w/ power purge system
• Return to manual in failure mode
• Suitable for boats w/ multiple engines and rudders, multiple steering stations, and autopilots
• Ignition protected (SAE J-1171). ABYC, CE, NMMA, ISO 10592 Approved

Seastar PA1200-3HP Power Assit Unit 12/24v 15ft Harness

The marine industry is continually introducing heavier, more powerful outboard engines. The Dometic SeaStar Steering Power Assist lets you steer these bigger, faster boats with the same comfort and ease that you’d expect when driving a car. Recommended for any boat that is 200 hp and above.

Seastar PA6010 Power Assist Autopilot Pump

• Autopilot ready - a single installation (i.e. no need to break into system for install of pump).
• Converts manual hydraulic steering to power steering.
• Dramatic reduction in steering wheel torque.
• Easy installation.
• OEM or Retrofit.
• Simple add on to an existing SeaStar manual system (from 1.4 - 2.4 SeaStar helm pumps)
• Compatible with power purge system.
• Ignition protected (SAE J-1171).
• ABYC, CE, NMMA, ISO 10592 Approved.
• Replaces other 12 & 24 volt systems

Converts manual hydraulic steering for dramatic reduction in steering wheel torque and at the same time provides a pump for an autopilot installation.

The SeaStar Power Assist Autopilot pump is the standard power assist product with the addition of a Type 1 or Type 2 autopilot pump. The SeaStar Autopilot pump is a fixed flow, reversible pump set that uses an internal hydraulic gear pump, producing very little vibration or noise. It is offered in 12 and 24 volt configurations, as well as two different pump sizes (type 1 & type 2).

• PA1200-3 Power Assist
• AP1219 Pump
• HA1205 SPA Adapter