TH Marine Atlas Micro 4 Jack

SMALLEST & LIGHTEST HYDRAULIC JACK ON THE MARKET

For Small Outboards - Max Weight 425 lbs / Max Horsepower 115 HP

Great For Shallow Water Boats - Gheenoes River Runners - Jon Boats - Skiffs

Get Out of Trouble Fast - Lifts in 8 Seconds Lightweight - Only 23 Pounds Fish "Skinny Water" With Confidence Self Contained Hydraulics Maximum outboard dry weight: 425 pounds Maximum outboard horsepower: 115 HP* Only Four (4) Inch Setback Clamp-On Motor Adapter Available (optional) Small Footprint - Only 14-5/8 in Wide and 11-1/2 in High

Clamp-On Motor Adapter (part # AHJM-CMA-DP) allows you to mount smaller engines with clamp-on brackets to the ATLAS Micro Jacker

TH Marine Hole Shot Plate

For 10 Atlas Jack Plate

• Models to Fit All ATLASTM Jack Plates (both standard and heavy duty jack plates)
• Provides Improved Hole Shot
• Reduces Water Drag at Take Off
• Reduces Porpoising

These are but a few of the comments coming from users of T-H Marine’s HOT SHOTTM hole shot plates. This simple but revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. Thats 2 to 3 seconds faster out of the hole. Hot ShotTM does this by dramatically reducing water drag on take off as well as serving as a center trim tab. An added advantage is the ability to stay on plane and virtually eliminating porpoising at lower speeds.

Models available for our ATLASTM hydraulic jack plates and Z-LOCKTM manual plates.

Models Marked "T" Have side imaging Transducer Cut-Out. Slot fits most Model SI Transducers.

TH Marine Hydraulic Gauge Kit

Firs Atlas 4 & 8 Jack Plates

• All Digital Readout
• Black Face and Stainless Steel FaceGauges Available
• Outer Bezel available in Stainless Steel or Black Polymer
• Each Number Indicates 1/4 in Rise
• All AtlasTM Jacks are Pre-drilled to Fit

Digital LED Position Gauge for AtlasTM Hydraulic Jack Plates

TH Marine Hydraulic Gauge Kit

Fits Atlas 4 & 8 Jack Plates

• All Digital Readout
• Black Face and Stainless Steel FaceGauges Available
• Outer Bezel available in Stainless Steel or Black Polymer
• Each Number Indicates 1/4 in Rise
• Numbered from 0 to 20
• All AtlasTM Jacks are Pre-drilled to Fit
• See pictures to the right to view both styles

Digital LED Position Gauge for AtlasTM Hydraulic Jack Plates

TH Marine Hydraulic Gauge Kit

Fits Atlas 6,10,12 & 14 Jack

• All Digital Readout
• Black Face and Stainless Steel FaceGauges Available
• Outer Bezel available in Stainless Steel or Black Polymer
• Each Number Indicates 1/4 in Rise
• Numbered from 0 to 20
• All AtlasTM Jacks are Pre-drilled to Fit
• See pictures to the right to view both styles

Digital LED Position Gauge for AtlasTM Hydraulic Jack Plates

TH Marine Steering Trim

Control

• Puts trim switches on steering wheel for convenience and safety
• Allows driver to keep both hands on the steering wheel
• Mounts easily on steering wheel spokes
• Weatherproof rubber booted switches
• Rugged urethane coiled cord
• Can be used for trim control or jack plate control

This steering trim control unit is molded of black plastic with raised white letters to not only enhance boat appearance but also provide the ultimate in control of any high performance boat. The steering trim control unit mounts easily to steering wheel spokes to place engine trim control at your finger tips for maximum safety and ease of operation. The weather proof, rubber booted, push button switches combined with a black urethane coiled cord provide a unit which will provide trim control without removing hands from steering wheel.

TH Marine Steering Trim

• Trim switch for outboards or stern drives
• Hydraulic jack plate switch
• Puts Tilt & Trim Control Anywhere
• Weatherproof Control Switches
• UV stable molded housing
• Can Also Operate Power Jack Plates

Transom Trim Control Switch / Hydraulic Jack Plate Switch

Put a trim switch or hydraulic jack plate anywhere you want with this versatile switch. The Transom Trim Control Switch provides a weatherproof tilt control system at the stern area of the boat to facilitate placing motor support in position with one person. Switch can also be used for remote adjustment of hydraulic jack plates. The switch housing is molded black plastic with raised white letters and may be mounted on any flat surface, comes with 18 pigtail wire and installation instructions.

TH Marine Dual Control FingerFlex Blinker Style" Steering Wheel Trim Switch

• Positive clicking technology for positive touch
• Operates engine trim and/or jack plates
• Fits hydraulic

TH Marine Single Finger Flex Blinker Style Trim Switch

• No Wheel Removal Required
• Wrap Around Bracket Installs in Minutes
• Positive Clicking Technology for Positive Touch
• Also Operates Power Jack Plates

T-H Marine offers the answer to convenient trim control for hydraulic helms ... FingerFlexTM. Simple and easy to install, this unit can be added to any boat in minutes ... by anyone. No need to remove your steering wheel...Simply wrap the locking collar around your bezel and attach two nuts and bolts. Run the attached wire through the dash and connect into trim system wiring harness...DONE!

FingerFlexTM incorporates Positive Clicking" technology that provides positive touch and feel so

TH Marine Hydraulic Gauge Kit

Fits Atlas 6,10,12 & 14 Jack

• All Digital Readout
• Black Face and Stainless Steel FaceGauges Available
• Outer Bezel available in Stainless Steel or Black Polymer
• Each Number Indicates 1/4 in Rise
• Numbered from 0 to 20
• All AtlasTM Jacks are Pre-drilled to Fit
• See pictures to the right to view both styles

Digital LED Position Gauge for AtlasTM Hydraulic Jack Plates

TH Marine G-Force Eliminator Red Prop Nut for Garmin Force Motors

• Machined from 6061 Billet Aluminum
• O-ring dampens noise/vibration and secures nut
• Wider contact area for a more stable prop
• Cooling ports aid in heat dissipation
• Anodized protected
• No tools needed
• Available in popular colors
• Visually appealing
• Designed and made in the U.S.A.
• Patent pending

One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.

Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.

Make sure that you’re getting the most out of your trolling motor with the ELIMINATOR Prop Nut.

TH Marine G-Force Eliminator Black Prop Nut for Lowrance Ghost Motors

• Machined from 6061 Billet Aluminum
• O-ring dampens noise/vibration and secures nut
• Wider contact area for a more stable prop
• Cooling ports aid in heat dissipation
• Anodized protected
• No tools needed
• Available in popular colors
• Visually appealing
• Designed and made in the U.S.A.
• Patent pending

One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.

Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.

Make sure that you’re getting the most out of your trolling motor with the ELIMINATOR Prop Nut.

TH Marine G-Force Eliminator Black Prop Nut for Garmin Force Motors

• Machined from 6061 Billet Aluminum
• O-ring dampens noise/vibration and secures nut
• Wider contact area for a more stable prop
• Cooling ports aid in heat dissipation
• Anodized protected
• No tools needed
• Available in popular colors
• Visually appealing
• Designed and made in the U.S.A.
• Patent pending
• 1

One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.

Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.

Make sure that you’re getting the most out of your trolling motor with the ELIMINATOR Prop Nut.

TH Marine G-Force Eliminator Red Prop Nut for Lowrance Ghost Motors

• Machined from 6061 Billet Aluminum
• O-ring dampens noise/vibration and secures nut
• Wider contact area for a more stable prop
• Cooling ports aid in heat dissipation
• Anodized protected
• No tools needed
• Available in popular colors
• Visually appealing
• Designed and made in the U.S.A.
• Patent pending

One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.

Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.

Make sure that you’re getting the most out of your trolling motor with the ELIMINATOR Prop Nut.

TH Marine G-Force Eliminator Black Prop Nut for Motorguide Motors

• Machined from 6061 Billet Aluminum
• O-ring dampens noise/vibration and secures nut
• Wider contact area for a more stable prop
• Cooling ports aid in heat dissipation
• Anodized protected
• No tools needed
• Available in popular colors
• Visually appealing
• Designed and made in the U.S.A.
• Patent pending

One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.

Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.

Make sure that you’re getting the most out of your trolling motor with the ELIMINATOR Prop Nut.

TH Marine G-Force Eliminator Blue Prop Nut for Motorguide Motors

• Machined from 6061 Billet Aluminum
• O-ring dampens noise/vibration and secures nut
• Wider contact area for a more stable prop
• Cooling ports aid in heat dissipation
• Anodized protected
• No tools needed
• Available in popular colors
• Visually appealing
• Designed and made in the U.S.A.
• Patent pending

One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.

Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.

Make sure that you’re getting the most out of your trolling motor with the ELIMINATOR Prop Nut.

TH Marine G-Force Eliminator Clear Prop Nut for Motorguide Motors

• Machined from 6061 Billet Aluminum
• O-ring dampens noise/vibration and secures nut
• Wider contact area for a more stable prop
• Cooling ports aid in heat dissipation
• Anodized protected
• No tools needed
• Available in popular colors
• Visually appealing
• Designed and made in the U.S.A.
• Patent pending

One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.

Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.

Make sure that you’re getting the most out of your trolling motor with the ELIMINATOR Prop Nut.

TH Marine G-Force Eliminator Red Prop Nut for Motorguide Motors

• Machined from 6061 Billet Aluminum
• O-ring dampens noise/vibration and secures nut
• Wider contact area for a more stable prop
• Cooling ports aid in heat dissipation
• Anodized protected
• No tools needed
• Available in popular colors
• Visually appealing
• Designed and made in the U.S.A.
• Patent pending

One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.

Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.

Make sure that you’re getting the most out of your trolling motor with the ELIMINATOR Prop Nut.

TH Marine G-Force Eliminator Black Prop Nut for Minn Kota 80,101, and 112 lb thrust motors

• Machined from 6061 Billet Aluminum
• O-ring dampens noise/vibration and secures nut
• Wider contact area for a more stable prop
• Cooling ports aid in heat dissipation
• Anodized protected
• No tools needed
• Available in popular colors
• Visually appealing
• Designed and made in the U.S.A.
• Patent pending

One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.

Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.

TH Marine G-Force Eliminator Blue Prop Nut for Minn Kota 80,101, and 112 lb thrust motors

• Machined from 6061 Billet Aluminum
• O-ring dampens noise/vibration and secures nut
• Wider contact area for a more stable prop
• Cooling ports aid in heat dissipation
• Anodized protected
• No tools needed
• Available in popular colors
• Visually appealing
• Designed and made in the U.S.A.
• Patent pending

One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.

Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.

Make sure that you’re getting the most out of your trolling motor with the ELIMINATOR Prop Nut.

TH Marine G-Force Eliminator Clear Prop Nut for Minn Kota 80,101, and 112 lb thrust motors

• Machined from 6061 Billet Aluminum
• O-ring dampens noise/vibration and secures nut
• Wider contact area for a more stable prop
• Cooling ports aid in heat dissipation
• Anodized protected
• No tools needed
• Available in popular colors
• Visually appealing
• Designed and made in the U.S.A.
• Patent pending

One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.

Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.

TH Marine G-Force Eliminator Red Prop Nut for Minn Kota 80,101, and 112 lb thrust motors

• Machined from 6061 Billet Aluminum
• O-ring dampens noise/vibration and secures nut
• Wider contact area for a more stable prop
• Cooling ports aid in heat dissipation
• Anodized protected
• No tools needed
• Available in popular colors
• Visually appealing
• Designed and made in the U.S.A.
• Patent pending

One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.

Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.

TH Marine G-Force Eliminator Black Prop Nut for Minn Kota 35-70lb Thrust Motors

• Machined from 6061 Billet Aluminum
• O-ring dampens noise/vibration and secures nut
• Wider contact area for a more stable prop
• Cooling ports aid in heat dissipation
• Anodized protected
• No tools needed
• Available in popular colors
• Visually appealing
• Designed and made in the U.S.A.
• Patent pending

One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.

Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.

Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.

Make sure that you’re getting the most out of your trolling motor with the ELIMINATOR Prop Nut.

TH Marine G-Force Eliminator Blue Prop Nut for Minn Kota 35-70lb Thrust Motors

• Machined from 6061 Billet Aluminum
• O-ring dampens noise/vibration and secures nut
• Wider contact area for a more stable prop
• Cooling ports aid in heat dissipation
• Anodized protected
• No tools needed
• Available in popular colors
• Visually appealing
• Designed and made in the U.S.A.
• Patent pending

One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.

Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.

Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.

Make sure that you’re getting the most out of your trolling motor with the ELIMINATOR Prop Nut.

TH Marine G-Force Eliminator Clear Prop Nut for Minn Kota 35-70lb Thrust Motors

• Machined from 6061 Billet Aluminum
• O-ring dampens noise/vibration and secures nut
• Wider contact area for a more stable prop
• Cooling ports aid in heat dissipation
• Anodized protected
• No tools needed
• Available in popular colors
• Visually appealing
• Designed and made in the U.S.A.
• Patent pending

One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.

Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.

Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.

Make sure that you’re getting the most out of your trolling motor with the ELIMINATOR Prop Nut.

TH Marine G-Force Eliminator Red Prop Nut for Minn Kota 35-70lb Thrust Motors

• Machined from 6061 Billet Aluminum
• O-ring dampens noise/vibration and secures nut
• Wider contact area for a more stable prop
• Cooling ports aid in heat dissipation
• Anodized protected
• No tools needed
• Available in popular colors
• Visually appealing
• Designed and made in the U.S.A.
• Patent pending

One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.

Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.

Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.

Make sure that you’re getting the most out of your trolling motor with the ELIMINATOR Prop Nut.

TH Marine G-Force Eliminator Red Prop Nut for Lowrance Ghost Motors

• Machined from 6061 Billet Aluminum
• O-ring dampens noise/vibration and secures nut
• Wider contact area for a more stable prop
• Cooling ports aid in heat dissipation
• Anodized protected
• No tools needed
• Available in popular colors
• Visually appealing
• Designed and made in the U.S.A.
• Patent pending

One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.

Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.

Make sure that you’re getting the most out of your trolling motor with the ELIMINATOR Prop Nut.

TH Marine G-Force Grass Goat

• Keeps your trolling motor clear of debris
• Genuine Marine grade
• Starboard Mounting Plate
• Stainless Steel Cutting-Blade

A must-have for anglers who spend a lot of time in heavily vegetated areas, the Grass Goat is an aftermarket cutting-tool for your trolling motor that slices through vegetation and keeps your trolling motor clear of debris. Featuring a genuine marine grade starboard mounting plate, it also comes equipped with a 316 stainless steel cutting-blade to ensure years of use under the toughest conditions.

Incredibly easy to install, the Grass Goat comes with all of the necessary mounting hardware and easy-to-follow instructions that will have you fishing weedlessly in no time. Don’t waste anymore time removing grass from your trolling motor when your fishing through your favorite honey hole, get the Grass Goat today.

TH Marine G-Force Grass Goat

• Keeps your trolling motor clear of debris
• Genuine Marine grade
• Starboard Mounting Plate
• Stainless Steel Cutting-Blade

A must-have for anglers who spend a lot of time in heavily vegetated areas, the Grass Goat is an aftermarket cutting-tool for your trolling motor that slices through vegetation and keeps your trolling motor clear of debris. Featuring a genuine marine grade starboard mounting plate, it also comes equipped with a 316 stainless steel cutting-blade to ensure years of use under the toughest conditions.

Incredibly easy to install, the Grass Goat comes with all of the necessary mounting hardware and easy-to-follow instructions that will have you fishing weedlessly in no time. Don’t waste anymore time removing grass from your trolling motor when your fishing through your favorite honey hole, get the Grass Goat today.

TH Marine G-Force Grass Goat

• Keeps your trolling motor clear of debris
• Genuine Marine grade
• Starboard Mounting Plate
• Stainless Steel Cutting-Blade

A must-have for anglers who spend a lot of time in heavily vegetated areas, the Grass Goat is an aftermarket cutting-tool for your trolling motor that slices through vegetation and keeps your trolling motor clear of debris. Featuring a genuine marine grade starboard mounting plate, it also comes equipped with a 316 stainless steel cutting-blade to ensure years of use under the toughest conditions.

Incredibly easy to install, the Grass Goat comes with all of the necessary mounting hardware and easy-to-follow instructions that will have you fishing weedlessly in no time. Don’t waste anymore time removing grass from your trolling motor when your fishing through your favorite honey hole, get the Grass Goat today.

TH Marine Troll Jacket Cable

Orgaizer Black Neoprene

• Wraps, velcros, and secures motor cables
• Eliminates the need for zip ties
• Protective & stylish
• US Patent Pending

With T-H Marine’s newest G-Force product, you can protect and manage your trolling motor cables with ease.

The G-Force Troll Jacket is a 2mm neoprene trolling motor wire and cable organizer. It measures 60 in long and includes a velcro closure. While wrapped, the diameter is about 1.5 in.

For maximum compatibility for your setup, you can cut and trim the sides where your cables need to come out. This eliminates the need for zip ties along the factory cable cover. It also helps you bundle and organize adjacent wires, like those for your depth finder and HydroWave.

Beyond organization, the Troll Jacket prevents exposure of factory cables. If your cables have electrical tape repair, the Troll Jacket gives an additional layer of defense against the elements.

TH Marine G-Force Troll

Perfect for MotorGuide

G-Force(R) Troll PerfectTM Tension Adjustment System

The Troll PerfectTM provides adjustable tension to control the effects of motor steering torque, high waves, heavy current, and excessive foot pedal play.

Get control of your trolling motor with the Troll PerfectTM Trolling Motor Tension Adjustment System. Whether fishing in wind, waves, current, or just whenever you need the high-speed settings, Troll PerfectTM will allow you to stop fighting the kick back, and side to side torque steer of your trolling motor. Now you can concentrate on fishing. Troll PerfectTM will also eliminate that sloppy foot pedal" issue. With the Troll PerfectTM

TH Marine G-Force Troll

Perfect for MotorGuide x3/5

G-Force(R) Troll PerfectTM Tension Adjustment System

The Troll PerfectTM provides adjustable tension to control the effects of motor steering torque, high waves, heavy current, and excessive foot pedal play.

Get control of your trolling motor with the Troll PerfectTM Trolling Motor Tension Adjustment System. Whether fishing in wind, waves, current, or just whenever you need the high-speed settings, Troll PerfectTM will allow you to stop fighting the kick back, and side to side torque steer of your trolling motor. Now you can concentrate on fishing. Troll PerfectTM will also eliminate that sloppy foot pedal" issue. With the Troll PerfectTM

TH Marine G-Force Troll

Perfect for MotorGuide x3/5

G-Force(R) Troll PerfectTM Tension Adjustment System

The Troll PerfectTM provides adjustable tension to control the effects of motor steering torque, high waves, heavy current, and excessive foot pedal play.

Get control of your trolling motor with the Troll PerfectTM Trolling Motor Tension Adjustment System. Whether fishing in wind, waves, current, or just whenever you need the high-speed settings, Troll PerfectTM will allow you to stop fighting the kick back, and side to side torque steer of your trolling motor. Now you can concentrate on fishing. Troll PerfectTM will also eliminate that sloppy foot pedal" issue. With the Troll PerfectTM

TH Marine G-Force Troll

Perfect for MotorGuide x3/5

G-Force(R) Troll PerfectTM Tension Adjustment System

The Troll PerfectTM provides adjustable tension to control the effects of motor steering torque, high waves, heavy current, and excessive foot pedal play.

Get control of your trolling motor with the Troll PerfectTM Trolling Motor Tension Adjustment System. Whether fishing in wind, waves, current, or just whenever you need the high-speed settings, Troll PerfectTM will allow you to stop fighting the kick back, and side to side torque steer of your trolling motor. Now you can concentrate on fishing. Troll PerfectTM will also eliminate that sloppy foot pedal" issue. With the Troll PerfectTM

TH Marine G-Force Troll

Perfect for MotorGuide

G-Force(R) Troll PerfectTM Tension Adjustment System

The Troll PerfectTM provides adjustable tension to control the effects of motor steering torque, high waves, heavy current, and excessive foot pedal play.

Get control of your trolling motor with the Troll PerfectTM Trolling Motor Tension Adjustment System. Whether fishing in wind, waves, current, or just whenever you need the high-speed settings, Troll PerfectTM will allow you to stop fighting the kick back, and side to side torque steer of your trolling motor. Now you can concentrate on fishing. Troll PerfectTM will also eliminate that sloppy foot pedal" issue. With the Troll PerfectTM

TH Marine G-Force Troll

Perfect for Minn Kota

G-Force(R) Troll PerfectTM Tension Adjustment System

The Troll PerfectTM provides adjustable tension to control the effects of motor steering torque, high waves, heavy current, and excessive foot pedal play.

Get control of your trolling motor with the Troll PerfectTM Trolling Motor Tension Adjustment System. Whether fishing in wind, waves, current, or just whenever you need the high-speed settings, Troll PerfectTM will allow you to stop fighting the kick back, and side to side torque steer of your trolling motor. Now you can concentrate on fishing. Troll PerfectTM will also eliminate that sloppy foot pedal" issue. With the Troll PerfectTM

TH Marine G-Force Troll

Perfect for Minn Kota

G-Force(R) Troll PerfectTM Tension Adjustment System

The Troll PerfectTM provides adjustable tension to control the effects of motor steering torque, high waves, heavy current, and excessive foot pedal play.

Get control of your trolling motor with the Troll PerfectTM Trolling Motor Tension Adjustment System. Whether fishing in wind, waves, current, or just whenever you need the high-speed settings, Troll PerfectTM will allow you to stop fighting the kick back, and side to side torque steer of your trolling motor. Now you can concentrate on fishing. Troll PerfectTM will also eliminate that sloppy foot pedal" issue. With the Troll PerfectTM

TH Marine HYDRA Battery Cable Extender

• Comes with stainless steel hardware, 5/16-18 stud
• Prevents the need for butt splices
• Acts as a simple solution to most electrical rigging issues

The days of struggling with marine battery connections are OVER. Along with the full line of HYDRA(R) battery accessories, the HYDRA(R) Battery Cable Extender Kit empowers boaters to go beyond the two posts on a battery so they can easily and efficiently manage their battery connections where it’s more convenient. And it can even save you trouble if you rig on-board battery chargers.

Each HYDRA(R) Battery Cable Extender includes both positive and negative terminals that can accommodate up to 2-gauge wire connecting back to the posts on the battery terminal. Additionally, each Battery Cable Extender uses stainless steel hardware with a 5/16-18 stud and a case to protect the in-line connection. The case then latches and unlatches for reuse and continued protection with water sealant or grease.

With the Battery Cable Extender in place, it’s a snap for boaters to access a convenient location for wiring-in accessories and lights and it prevents unwanted splicing with factory rigging.

TH Marine Top Load Hot Foot

• Drive your boat like you drive your car
• Improved Safety & Throttle Control
• Attractive Full Color Pedal Graphics
• Topside Cable Connections
• Patented Idle Stop for FICHT & Optimax
• Stainless Steel Hardware with Teflon Bushings

HOT FOOTTM Pro is the ultimate upgrade for the boater looking for safety and performance features that made Hot FootTM the foot throttle boaters demand. HOT FOOTTM Pro sports a rugged aluminum finish with great color graphics on the pedal to accent any high performance boat. The top loading feature for the throttle cable* makes HOT FOOTTM Pro easier to install and gives more foot and leg room. Standard features include a patented idle stop for the Ficht and Optimax engines, stainless steel return spring, Teflon bushings on all critical pivot points and tow clip for added security.

TH Marine Universal Hot Foot

• Drive your boat like you drive your car -- features make driving your boat fun and safe
• Number one throttle on the market for over 20 years
• Provides added safety and performance
• Improves throttle control for all outboard and inboards
• All cast aluminum and stainless steel hardware
• Lightweight and resistant to corrosion
• Stainless steel hardware and nonsticking teflon and nylon bearing surfaces for trouble free operation
• Nylon and teflon bushings on all critical pivot points
• Stainless steel spring returns engine to idle position when released
• Equipped with toe clip for additional safety in extreme operating conditions
• Mounts directly to floor of boat with four screws (not included)
• Patented Idle Stop for FICHT and Optimax Engines
• Optional Slide Mount (HFM-1-DP) available for comfort and multiple drivers

The Original and ONLY real HOT FOOTTM Throttle

Drive your boat safer by driving it like your car. This is the one and only HOT FOOTTM throttle - the original boat foot throttle that has been on the market for 30+ years.

This throttle allows you to drive your boat like you do your car. You keep both hands on the wheel and control the throttle with your foot. The throttle returns to idle if you remove your foot. This throttle is a must-have for safe operation of high performance boats.

TH Marine G-Force Troll

Perfect for Minn Kota

G-Force(R) Troll PerfectTM Tension Adjustment System

The Troll PerfectTM provides adjustable tension to control the effects of motor steering torque, high waves, heavy current, and excessive foot pedal play.

Get control of your trolling motor with the Troll PerfectTM Trolling Motor Tension Adjustment System. Whether fishing in wind, waves, current, or just whenever you need the high-speed settings, Troll PerfectTM will allow you to stop fighting the kick back, and side to side torque steer of your trolling motor. Now you can concentrate on fishing. Troll PerfectTM will also eliminate that sloppy foot pedal" issue. With the Troll PerfectTM

TH Marine Hydrowave H2 System

Package

• Multiple Sound Patterns
• Waterproof Speaker
• 16 bit CD quality sound
• Expansion port for additional sounds
• 5 pre-programmed delay options (15/30/45/60/120)
• 14 feet speaker cord with 6 feet power cord
• Lateral & vibration reaction technology
• 2.5 liquid display
• Made in the U.S.A.

• HydroWave H2 Fish Feeding Stimulator Unit
• Waterproof speaker with 14 feet cord
• Speaker mounting hardware
• User guide and warranty card
"

TH Marine Top Load Hot Foot

• Drive your boat like you drive your car
• Improved Safety & Throttle Control
• Attractive Full Color Pedal Graphics
• Topside Cable Connections
• Patented Idle Stop for FICHT & Optimax
• Stainless Steel Hardware with Teflon Bushings

HOT FOOTTM Pro is the ultimate upgrade for the boater looking for safety and performance features that made Hot FootTM the foot throttle boaters demand. HOT FOOTTM Pro sports a rugged aluminum finish with great color graphics on the pedal to accent any high performance boat. The top loading feature for the throttle cable* makes HOT FOOTTM Pro easier to install and gives more foot and leg room. Standard features include a patented idle stop for the Ficht and Optimax engines, stainless steel return spring, Teflon bushings on all critical pivot points and tow clip for added security.

TH Marine Adjustable Side

• Easy Adjustment of Hot FootTM position
• Stainless Steel Fasteners & Release Pin
• Allows 5 in of Slide Adjustment
• Great for multiple drivers of different heights
• Allows change of throttle position for longer runs
• All extruded aluminum and stainless steel construction

This sliding mount allows easy adjustment of the Hot FootTM throttle position for different drivers or driving conditions. Mount allows over 5 of adjustment for people of different heights.

TH Marine Hydrowave H2 System

Package Inshore Salwater

• Inshore Saltwater Sounds:
• Baitfish Frenzy
• Baitfish Passive
• Baitfish Schooling
• Baitfish Finesse
• Baitfish Ultra Finesse
• Baitfish Blitz
• Herring Frenzy
• Herring Passive
• Croaker Frenzy
• Croaker Passive
• Crab Frenzy
• Crab Passive
• Mullet Frenzy
• Mullet Passive
• Shrimp Frenzy
• Shrimp Passive

The HydroWave Inshore Saltwater H2 is a Marine Audio Device with 16 sound patterns for the Inshore Saltwater environment. Baitfish recorded include shrimp, mullet, croaker, herring, cigar minnow and other popular saltwater baitfish.

TH Marine Hydrowave H2 System

Package Kevin Van Dam

• In addition to the 16 sound patterns on the H2 Bass HydroWave, the KVD H2 has 9 additional sound patterns designed by Kevin VanDam for specific fishing situations:
• Shallow Power
• Shallow Finesse
• Vegetation
• Top Water Schooling
• Off Shore Structure
• Off Shore Schooling
• Off Shore Finesse
• Marinas/Docks
• Crawfish

The HydroWave KVD H2 is a Marine Audio Device based on the reactive senses of a Bass and other predatory fish. The HydroWave H2 delivers the latest in patented, sound emitting technology, effectively imitating the audible underwater sounds of baitfish and fish-feeding activities. Research has proven these sounds stimulate feeding in game fish.

TH Marine Atlas 10 Jack Plate

The Atlas revolutionary design meets the demands of today’s high performance outboards. The one piece design

TH Marine Hydrowave Mini

System Bass Edition

• Passive Sound
• Frenzy Sound
• Shock Resistant
• Amplification System
• 90 Days Limited Warranty
• Lateral & Vertical Reaction Technology
• Waterproof

Now anglers fishing from a kayak, jonboat or even from the bank can harness the same Hydrowave technology that Elite Series pros, Kevin VanDam and Jeff Kreit, use to get inactive fish to feed and ignite feeding fish into a frenzy.

Introducing the new Hydrowave Mini Electronic Feeding Simulator. A more compact, portable version of the original Hydrowave, it’s also more affordable for the everyday angler.

The HydroWave Bass H2 is a Marine Audio Device based on the reactive senses of a Bass and other predatory fish, the HydroWave Bass H2 delivers the latests in patented, sound emitting technology, effectively imitating the audible underwater sounds of baitfish and fish-feeding activities. Research has proven these sounds stimulate feeding impulses in game fish.

The Tactile Sound Transmissions emitted by HydroWave H2’s finely-tuned amplifiers are different from ordinary sounds because they are the sounds and vibrations that you can actually feel. Tactile sounds are what fish respond to. The unit emits sound waves that predatory fish feel, hear and sense as natural baitfish activities - to ignite a feeding frenzy."

• HydroWave Walleye Mini
• Waterproof Speaker w/ 8ft cord
• User Guide
• Warranty Card
"

TH Marine Hydrowave H2 System

Package Walleye Edition

• 9 sound patterns
• 5 pre-programmed delay options (15/30/45/60/120 seconds)
• 16-bit CD quality sound
• 2.5 inch Liquid Crystal Display
• Easy access expansion port for additional sounds
• New, sleek look
• Combined speaker, power cable plug-in
• Sounds on the HydroWave H2 Walleye Edition:
• Shad Passive
• Shad Frenzy
• Shad Schooling
• Shad Spawning
• Perch Passive
• Perch Bedding
• Perch Frenzy
• Crawfish Passive
• Crawfish Frenzy

The new HydroWave H2 Walleye Edition Electronic Feeding Stimulator builds on the success of the original HydroWave and now offers several key new upgrades.

• HydroWave H2 Walleye Edition Unit
• 6 foot Power Cable
• Omni-Directional Speaker with 14 foot Cable
• Unit Mounting Bracket
• 18 inch Zip Tie (Qty. 2)
• 8 inch Zip Tie (Qty. 6)
• User Guide Including Warranty

TH Marine Hydrowave Mini

System Bass Edition

• Passive Sound
• Frenzy Sound
• Shock Resistant
• Amplification System
• 90 Days Limited Warranty
• Lateral & Vertical Reaction Technology
• Waterproof

Now anglers fishing from a kayak, jonboat or even from the bank can harness the same Hydrowave technology that Elite Series pros, Kevin VanDam and Jeff Kreit, use to get inactive fish to feed and ignite feeding fish into a frenzy.

Introducing the new Hydrowave Mini Electronic Feeding Simulator. A more compact, portable version of the original Hydrowave, it’s also more affordable for the everyday angler.

The HydroWave Bass H2 is a Marine Audio Device based on the reactive senses of a Bass and other predatory fish, the HydroWave Bass H2 delivers the latests in patented, sound emitting technology, effectively imitating the audible underwater sounds of baitfish and fish-feeding activities. Research has proven these sounds stimulate feeding impulses in game fish.

The Tactile Sound Transmissions emitted by HydroWave H2’s finely-tuned amplifiers are different from ordinary sounds because they are the sounds and vibrations that you can actually feel. Tactile sounds are what fish respond to. The unit emits sound waves that predatory fish feel, hear and sense as natural baitfish activities - to ignite a feeding frenzy."

• HydroWave Walleye Mini
• Waterproof Speaker w/ 8ft cord
• User Guide
• Warranty Card
"

TH Marine Atlas 12 Jack Plate

The Atlas revolutionary design meets the demands of today’s high performance outboards. The one piece design

TH Marine Z-LOCKTM 10 Manual Jack Plate

• Z-LockTM Jack Plate Design Eliminates Side Slippage
• Matching slotted extrusions LOCK side plates in place
• Strong Aircraft Grade Aluminum
• Full 1?2 in Material For Strength
• Handles All V6 Outboards up to 300 hp
• Easy to Adjust From Top of Jack
• 5 in of Vertical Adjustment

The excellence of T-H Marine’s HI-JACKERTM jack plate series continues with the Z-Lock Manual Jack Plate design upgrade.

TH Marine Hi-JackerTM Fixed Jack Plate 4 inch

• Inexpensive Short Transom Fix
• Solid Aluminum Extrusion
• 3-Engine Mount Holes - 2-Transom Holes
• Total Vertical of 5-1/2 Inches - 4 in Setback

This tough 3/8 thick aluminum bracket provides an inexpensive solution to mounting a long shaft outboard to a short transom. Also great as a fixed jack plate for all V6 outboards. Handles all outboards up to 150 hp. Three engine mounting holes and two transom mounting holes combined with a 3 in designed lift allows a total of 5 1/2 in of lift with a full four (4) inches of setback.

TH Marine Hi-JackerTM Fixed Jack Plate 4 inch Heavy Duty

• Inexpensive Short Transom Fix
• Solid Aluminum Extrusion
• 3-Engine Mount Holes - 2-Transom Holes
• Total Vertical of 5-1/2 Inches - 4 in Setback

This tough 1/2 thick aluminum bracket provides an inexpensive solution to mounting a long shaft outboard to a short transom. Also great as a fixed jack plate for all V6 outboards. Handles all outboards up to 300 hp. Three engine mounting holes and two transom mounting holes combined with a 3 in designed lift allows a total of 5 1/2 in of lift with a full four (4) inches of setback.

TH Marine Z-LOCKTM 12 Manual Jack Plate

• Z-LockTM Jack Plate Design Eliminates Side Slippage
• Matching slotted extrusions LOCK side plates in place
• Strong Aircraft Grade Aluminum
• Full 1?2 in Material For Strength
• Handles All V6 Outboards up to 300 hp
• Easy to Adjust From Top of Jack
• 5 in of Vertical Adjustment

The excellence of T-H Marine’s HI-JACKERTM jack plate series continues with the Z-Lock Manual Jack Plate design upgrade.

TH Marine Z-LOCKTM 4 Manual Jack Plate

• Z-LockTM Jack Plate Design Eliminates Side Slippage
• Matching slotted extrusions LOCK side plates in place
• Strong Aircraft Grade Aluminum
• Full 1?2 in Material For Strength
• Handles All V6 Outboards up to 300 hp
• Easy to Adjust From Top of Jack
• 5 in of Vertical Adjustment

The excellence of T-H Marine’s HI-JACKERTM jack plate series continues with the Z-Lock Manual Jack Plate design upgrade.

TH Marine Z-LOCKTM 6 Manual Jack Plate

• Z-LockTM Jack Plate Design Eliminates Side Slippage
• Matching slotted extrusions LOCK side plates in place
• Strong Aircraft Grade Aluminum
• Full 1?2 in Material For Strength
• Handles All V6 Outboards up to 300 hp
• Easy to Adjust From Top of Jack
• 5 in of Vertical Adjustment

The excellence of T-H Marine’s HI-JACKERTM jack plate series continues with the Z-Lock Manual Jack Plate design upgrade.

TH Marine Atlas 4 Jack Plate

The Atlas revolutionary design meets the demands of today’s high performance outboards. The one piece design

TH Marine Atlas 6 Jack Plate

The Atlas revolutionary design meets the demands of today’s high performance outboards. The one piece design

TH Marine Troll-Tamer

Trolling Motor Stabilizer Lock

• Prevents damages to trolling motors
• Locks motor to deck security
• Models for most Minn Kota & MotorGuide units
• Locking pin with quick release toe kick base
• All stainless steel - No rust or corrosion

The NEW Troll-TamerTM Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-TamerTM Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-TamerTM Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditions

The latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.

TH Marine Z-LOCKTM 8 Manual Jack Plate

• Z-LockTM Jack Plate Design Eliminates Side Slippage
• Matching slotted extrusions LOCK side plates in place
• Strong Aircraft Grade Aluminum
• Full 1?2 in Material For Strength
• Handles All V6 Outboards up to 300 hp
• Easy to Adjust From Top of Jack
• 5 in of Vertical Adjustment

The excellence of T-H Marine’s HI-JACKERTM jack plate series continues with the Z-Lock Manual Jack Plate design upgrade.

TH Marine Troll-Tamer

Trolling Motor Stabilizer Lock

• Prevents damages to trolling motors
• Locks motor to deck security
• Models for most Minn Kota & MotorGuide units
• Locking pin with quick release toe kick base
• All stainless steel - No rust or corrosion

The NEW Troll-TamerTM Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-TamerTM Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-TamerTM Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditions

The latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.

TH Marine Atlas 8 Jack Plate

The Atlas revolutionary design meets the demands of today’s high performance outboards. The one piece design

TH Marine Hole Shot Plate

For 10 Atlas Jack Plate

• Models to Fit All ATLASTM Jack Plates (both standard and heavy duty jack plates)
• Provides Improved Hole Shot
• Reduces Water Drag at Take Off
• Reduces Porpoising

These are but a few of the comments coming from users of T-H Marine’s HOT SHOTTM hole shot plates. This simple but revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. Thats 2 to 3 seconds faster out of the hole. Hot ShotTM does this by dramatically reducing water drag on take off as well as serving as a center trim tab. An added advantage is the ability to stay on plane and virtually eliminating porpoising at lower speeds.

Models available for our ATLASTM hydraulic jack plates and Z-LOCKTM manual plates.

Models Marked "T" Have side imaging Transducer Cut-Out. Slot fits most Model SI Transducers.

TH Marine Troll-Tamer

Trolling Motor Stabilizer Lock

• All Digital Readout
• Black Face and Stainless Steel FaceGauges Available
• Outer Bezel available in Stainless Steel or Black Polymer
• Each Number Indicates 1/4 in Rise
• All AtlasTM Jacks are Pre-drilled to Fit

The NEW Troll-TamerTM Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-TamerTM Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-TamerTM Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditions

The latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.

TH Marine Troll-Tamer

Trolling Motor Stabilizer Lock

• Prevents damages to trolling motors
• Locks motor to deck security
• Models for most Minn Kota & MotorGuide units
• Locking pin with quick release toe kick base
• All stainless steel - No rust or corrosion

The NEW Troll-TamerTM Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-TamerTM Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-TamerTM Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditions

The latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.

TH Marine Troll-Tamer

Trolling Motor Stabilizer Lock

• All Digital Readout
• Black Face and Stainless Steel FaceGauges Available
• Outer Bezel available in Stainless Steel or Black Polymer
• Each Number Indicates 1/4 in Rise
• All AtlasTM Jacks are Pre-drilled to Fit

The NEW Troll-TamerTM Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-TamerTM Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-TamerTM Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditions

The latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.

TH Marine KVD Kong Extreme

• Tames the largest beast of marine electronics
• Zero movement in the roughest water conditions
• Marine grade mount for freshwater or saltwater
• All 6061 T6 aircraft aluminum & SS

The KVD KONG electronics mount is an extreme electronics mount. The KONG is the only electronics mount truly designed and built to give a rock solid, no movement mount for the largest and heaviest marine electronics.

TH Marine Hole Shot Plate

For 14 Atlas Jack Plate

• Models to Fit All ATLASTM Jack Plates (both standard and heavy duty jack plates)
• Provides Improved Hole Shot
• Reduces Water Drag at Take Off
• Reduces Porpoising

These are but a few of the comments coming from users of T-H Marine’s HOT SHOTTM hole shot plates. This simple but revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. Thats 2 to 3 seconds faster out of the hole. Hot ShotTM does this by dramatically reducing water drag on take off as well as serving as a center trim tab. An added advantage is the ability to stay on plane and virtually eliminating porpoising at lower speeds.

Models available for our ATLASTM hydraulic jack plates and Z-LOCKTM manual plates.

Models Marked "T" Have side imaging Transducer Cut-Out. Slot fits most Model SI Transducers.

TH Marine Hole Shot Plate

For 4 Atlas Jack Plate

• Models to Fit All ATLASTM Jack Plates (both standard and heavy duty jack plates)
• Provides Improved Hole Shot
• Reduces Water Drag at Take Off
• Reduces Porpoising

These are but a few of the comments coming from users of T-H Marine’s HOT SHOTTM hole shot plates. This simple but revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. Thats 2 to 3 seconds faster out of the hole. Hot ShotTM does this by dramatically reducing water drag on take off as well as serving as a center trim tab. An added advantage is the ability to stay on plane and virtually eliminating porpoising at lower speeds.

Models available for our ATLASTM hydraulic jack plates and Z-LOCKTM manual plates.

Models Marked "T" Have side imaging Transducer Cut-Out. Slot fits most Model SI Transducers.

TH Marine Hole Shot Plate

For 12 Atlas Jack Plate

• Models to Fit All ATLASTM Jack Plates (both standard and heavy duty jack plates)
• Provides Improved Hole Shot
• Reduces Water Drag at Take Off
• Reduces Porpoising

These are but a few of the comments coming from users of T-H Marine’s HOT SHOTTM hole shot plates. This simple but revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. Thats 2 to 3 seconds faster out of the hole. Hot ShotTM does this by dramatically reducing water drag on take off as well as serving as a center trim tab. An added advantage is the ability to stay on plane and virtually eliminating porpoising at lower speeds.

Models available for our ATLASTM hydraulic jack plates and Z-LOCKTM manual plates.

Models Marked "T" Have side imaging Transducer Cut-Out. Slot fits most Model SI Transducers.

TH Marine Hole Shot Plate

For 6 Atlas Jack Plate

• Models to Fit All ATLASTM Jack Plates (both standard and heavy duty jack plates)
• Provides Improved Hole Shot
• Reduces Water Drag at Take Off
• Reduces Porpoising

These are but a few of the comments coming from users of T-H Marine’s HOT SHOTTM hole shot plates. This simple but revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. Thats 2 to 3 seconds faster out of the hole. Hot ShotTM does this by dramatically reducing water drag on take off as well as serving as a center trim tab. An added advantage is the ability to stay on plane and virtually eliminating porpoising at lower speeds.

Models available for our ATLASTM hydraulic jack plates and Z-LOCKTM manual plates.

Models Marked "T" Have side imaging Transducer Cut-Out. Slot fits most Model SI Transducers.

TH Marine Hole Shot Plate

For 8 Atlas Jack Plate

• Models to Fit All ATLASTM Jack Plates (both standard and heavy duty jack plates)
• Provides Improved Hole Shot
• Reduces Water Drag at Take Off
• Reduces Porpoising

These are but a few of the comments coming from users of T-H Marine’s HOT SHOTTM hole shot plates. This simple but revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. Thats 2 to 3 seconds faster out of the hole. Hot ShotTM does this by dramatically reducing water drag on take off as well as serving as a center trim tab. An added advantage is the ability to stay on plane and virtually eliminating porpoising at lower speeds.

Models available for our ATLASTM hydraulic jack plates and Z-LOCKTM manual plates.

Models Marked "T" Have side imaging Transducer Cut-Out. Slot fits most Model SI Transducers.

TH Marine Mini Kong Mount

• Unique DOWEL PIN LOCK" No Slip Joints
• Quick Release Spring Loaded Base
• Multi-Position Pivot Points in Base
• Easy to Adjust Wing Nut Locks on Joints
• Three Models to Fit Any Electronic Unit
• Annodized Aluminum with Stainless Fasteners

KongTM Electronics Mounts are designed to securely hold your heavy marine electronics in place under any condition. Our exclusive "DOWEL PIN LOCK" joint locking system ensures that your valuable electronics stay in place where you want them. No more worries about your electronics slipping

TH Marine Mini Kong Mount

• Unique DOWEL PIN LOCK" No Slip Joints
• Quick Release Spring Loaded Base
• Multi-Position Pivot Points in Base
• Easy to Adjust Wing Nut Locks on Joints
• Three Models to Fit Any Electronic Unit
• Annodized Aluminum with Stainless Fasteners

KongTM Electronics Mounts are designed to securely hold your heavy marine electronics in place under any condition. Our exclusive "DOWEL PIN LOCK" joint locking system ensures that your valuable electronics stay in place where you want them. No more worries about your electronics slipping

TH Marine Mini Kong Mount

• Unique DOWEL PIN LOCK" No Slip Joints
• Quick Release Spring Loaded Base
• Multi-Position Pivot Points in Base
• Easy to Adjust Wing Nut Locks on Joints
• Three Models to Fit Any Electronic Unit
• Annodized Aluminum with Stainless Fasteners

KongTM Electronics Mounts are designed to securely hold your heavy marine electronics in place under any condition. Our exclusive "DOWEL PIN LOCK" joint locking system ensures that your valuable electronics stay in place where you want them. No more worries about your electronics slipping

TH Marine Mini Kong Mount

• Unique DOWEL PIN LOCK" No Slip Joints
• Quick Release Spring Loaded Base
• Multi-Position Pivot Points in Base
• Easy to Adjust Wing Nut Locks on Joints
• Three Models to Fit Any Electronic Unit
• Annodized Aluminum with Stainless Fasteners

KongTM Electronics Mounts are designed to securely hold your heavy marine electronics in place under any condition. Our exclusive "DOWEL PIN LOCK" joint locking system ensures that your valuable electronics stay in place where you want them. No more worries about your electronics slipping

TH Marine Kong Wave Tamer

• Heavy gauge aluminum construction
• Protects electronics from extreme conditions
• Anodized finish-black
• Universal hole pattern fits most electronics brackets. Can easily be drilled for any other models.
• Allows electronics to be mounts in center of front deck behind trolling motor pedal
• Allows easy viewing while fishing from either side of boat

TH Marine Kong Wave Tamer

• Heavy gauge aluminum construction
• Protects electronics from extreme conditions
• Anodized finish-red
• Universal hole pattern fits most electronics brackets. Can easily be drilled for any other models.
• Allows electronics to be mounts in center of front deck behind trolling motor pedal
• Allows easy viewing while fishing from either side of boat